메뉴 건너뛰기




Volumn 124, Issue 3, 2002, Pages 528-535

The mechanisms of chip formation in machining hardened steels

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; DUCTILE FRACTURE; FAILURE (MECHANICAL); HARDNESS; PLASTIC DEFORMATION; SHEAR DEFORMATION; STEEL; STRAIN; THERMOPLASTICS;

EID: 0036700518     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1455643     Document Type: Article
Times cited : (159)

References (33)
  • 3
    • 0015616983 scopus 로고
    • An electron microscope study of chip formation
    • Ramalingam, S., and Black, J.T., 1973, "An Electron Microscope Study of Chip Formation," Metall. Trans., 4, pp. 1103-1112.
    • (1973) Metall. Trans. , vol.4 , pp. 1103-1112
    • Ramalingam, S.1    Black, J.T.2
  • 4
    • 0019929643 scopus 로고
    • On the catastrophic shear instability in high-speed machining of an AISI 4340 steel
    • Komanduri, R., Schroeder, T., Hazra, J., von Turkovich, B.F., and Flom, D.G., 1982, "On the Catastrophic Shear Instability in High-Speed Machining of an AISI 4340 Steel," ASME J. Eng. Ind., 104, pp. 121-131.
    • (1982) ASME J. Eng. Ind. , vol.104 , pp. 121-131
    • Komanduri, R.1    Schroeder, T.2    Hazra, J.3    Von Turkovich, B.F.4    Flom, D.G.5
  • 5
    • 0031275238 scopus 로고    scopus 로고
    • Modelling of thermomechanical instability in machining
    • Zhen-Bin, H., and Komanduri, R., 1997, "Modelling of Thermomechanical Instability in Machining," Int. J. Mech. Sci., 39(11), pp. 1273-1314.
    • (1997) Int. J. Mech. Sci. , vol.39 , Issue.11 , pp. 1273-1314
    • Zhen-Bin, H.1    Komanduri, R.2
  • 6
    • 0029704832 scopus 로고    scopus 로고
    • On chip morphology, tool wear and cutting mechanics in finish hard turning
    • Davies, M.A., Chou, Y., and Evans, C.J., 1996, "On Chip Morphology, Tool Wear and Cutting Mechanics in Finish Hard Turning," CIRP Ann., 45(1), pp. 77-82.
    • (1996) CIRP Ann. , vol.45 , Issue.1 , pp. 77-82
    • Davies, M.A.1    Chou, Y.2    Evans, C.J.3
  • 7
    • 0031200082 scopus 로고    scopus 로고
    • Experimental analysis of the cutting process and chip formation at high speed machining
    • Proc. 5th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Toledo, Spain, Sep. 22-26
    • Sutter, G., Faure, L., Molinari, A., Delime, A., and Dudzinski, D., 1997, "Experimental Analysis of the Cutting Process and Chip Formation at High Speed Machining," Proc. 5th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Toledo, Spain, Sep. 22-26, Journal de Physique IV (France), Vol. 7, pp. C33-C38.
    • (1997) Journal de Physique IV (France) , vol.7
    • Sutter, G.1    Faure, L.2    Molinari, A.3    Delime, A.4    Dudzinski, D.5
  • 8
    • 58149367510 scopus 로고
    • Machining characteristics of hard materials
    • Nakayama, K., Arai, M., and Kada, T., 1988, "Machining Characteristics of Hard Materials," CIRP Ann., 37(1), pp. 89-92.
    • (1988) CIRP Ann. , vol.37 , Issue.1 , pp. 89-92
    • Nakayama, K.1    Arai, M.2    Kada, T.3
  • 9
    • 0027242830 scopus 로고
    • Chip formation in the machining of hardened steel
    • Shaw, M.C., and Vyas, A., 1993, "Chip Formation in the Machining of Hardened Steel," CIRP Ann., 42(1), pp. 29-33.
    • (1993) CIRP Ann. , vol.42 , Issue.1 , pp. 29-33
    • Shaw, M.C.1    Vyas, A.2
  • 10
    • 0032643389 scopus 로고    scopus 로고
    • Mechanics of saw-tooth chip formation in metal cutting
    • Vyas, A., and Shaw, M.C., 1999, "Mechanics of Saw-tooth Chip Formation in Metal Cutting," ASME J. Manuf. Sci. Eng., 121, pp. 163-172.
    • (1999) ASME J. Manuf. Sci. Eng. , vol.121 , pp. 163-172
    • Vyas, A.1    Shaw, M.C.2
  • 11
    • 0019372091 scopus 로고
    • New observations on the mechanism of chip formation when machining titanium alloys
    • Komanduri, R., and von Turkovicb, B.F., 1981, "New Observations on the Mechanism of Chip Formation when Machining Titanium Alloys," Wear, 69, pp. 179-188.
    • (1981) Wear , vol.69 , pp. 179-188
    • Komanduri, R.1    Von Turkovicb, B.F.2
  • 12
    • 0031210407 scopus 로고    scopus 로고
    • Flow instability in the orthogonal machining of CP titanium
    • Sheikh-Ahmad, J., and Bailey, J.A., 1997, "Flow Instability in the Orthogonal Machining of CP Titanium," ASME J. Manuf. Sci. Eng., 119(3), pp. 307-312.
    • (1997) ASME J. Manuf. Sci. Eng. , vol.119 , Issue.3 , pp. 307-312
    • Sheikh-Ahmad, J.1    Bailey, J.A.2
  • 13
    • 85024539223 scopus 로고
    • On shear instability in machining a nickel-iron base superalloy
    • Komanduri, R., and Schroeder, T.A., 1986, "On Shear Instability in Machining a Nickel-Iron Base Superalloy," ASME J. Eng. Ind., 108, pp. 93-100.
    • (1986) ASME J. Eng. Ind. , vol.108 , pp. 93-100
    • Komanduri, R.1    Schroeder, T.A.2
  • 15
    • 0029706702 scopus 로고    scopus 로고
    • A model for chip formation during the machining of hardened steel
    • Elbestawi, M.A., Srivastava, A.K., and El-Wardany, T.I., 1996, "A Model for Chip Formation During the Machining of Hardened Steel," CIRP Ann., 45(1), pp. 71-76.
    • (1996) CIRP Ann. , vol.45 , Issue.1 , pp. 71-76
    • Elbestawi, M.A.1    Srivastava, A.K.2    El-Wardany, T.I.3
  • 16
    • 0027245269 scopus 로고
    • Turning versus grinding - A comparison of surface integrity aspects and attainable accuracies
    • König, W., Berktold, A., and Koch, K.-F., 1993, "Turning Versus Grinding-A Comparison of Surface Integrity Aspects and Attainable Accuracies," CIRP Ann., 42(1), pp. 39-43.
    • (1993) CIRP Ann. , vol.42 , Issue.1 , pp. 39-43
    • König, W.1    Berktold, A.2    Koch, K.-F.3
  • 17
    • 0031636461 scopus 로고    scopus 로고
    • A contribution to the study of the cutting mechanisms during high speed machining of hardened steel
    • Poulachon, G., and Moisan, A., 1998, "A Contribution to the Study of the Cutting Mechanisms During High Speed Machining of Hardened Steel," CIRP Ann., 47(1), pp. 73-76.
    • (1998) CIRP Ann. , vol.47 , Issue.1 , pp. 73-76
    • Poulachon, G.1    Moisan, A.2
  • 18
    • 0030716110 scopus 로고    scopus 로고
    • On the dynamics of chip formation in the machining of hard metals
    • Davies, M.A., Burns, T.J., and Evans, C.J., 1997, "On the Dynamics of Chip Formation in the Machining of Hard Metals," CIRP Ann., 46(1), pp. 25-30.
    • (1997) CIRP Ann. , vol.46 , Issue.1 , pp. 25-30
    • Davies, M.A.1    Burns, T.J.2    Evans, C.J.3
  • 19
    • 0020849102 scopus 로고
    • Shear localisation during metal cutting
    • Semiatin, S.L., and Rao, S.B., 1983, "Shear Localisation during Metal Cutting," Mater. Sci. Eng., 61, pp. 185-192.
    • (1983) Mater. Sci. Eng. , vol.61 , pp. 185-192
    • Semiatin, S.L.1    Rao, S.B.2
  • 20
    • 84996163743 scopus 로고
    • Catastrophic thermoplastic shear
    • Recht, R.F., 1964, "Catastrophic Thermoplastic Shear," ASME J. Appl. Mech:, 31, pp. 189-192.
    • (1964) ASME J. Appl. Mech. , vol.31 , pp. 189-192
    • Recht, R.F.1
  • 21
    • 51249173277 scopus 로고
    • Observation of an adiabatic shear band in AISI 4340 steel by high-voltage transmission electron microscopy
    • Wittman, C.L., Meyers, M.A., and Pak, H.-R., 1990, "Observation of an Adiabatic Shear Band in AISI 4340 Steel by High-voltage Transmission Electron Microscopy," Metall. Trans. A, 21A, pp. 707-716.
    • (1990) Metall. Trans. A , vol.21 A , pp. 707-716
    • Wittman, C.L.1    Meyers, M.A.2    Pak, H.-R.3
  • 22
    • 0023366482 scopus 로고
    • Microstructure transformation induced by adiabatic shearing in armour steel
    • Derep, J.L., 1987, "Microstructure Transformation Induced by Adiabatic Shearing in Armour Steel," Acta Metall., 35(6), pp. 1245-1249.
    • (1987) Acta Metall. , vol.35 , Issue.6 , pp. 1245-1249
    • Derep, J.L.1
  • 23
    • 0017674592 scopus 로고
    • The split shearzone-mechanism of chip segmentation
    • Van Luttervelt, C.A., 1977, "The Split Shearzone-Mechanism of Chip Segmentation," CIRP Ann., 25(1), pp. 33-37.
    • (1977) CIRP Ann. , vol.25 , Issue.1 , pp. 33-37
    • Van Luttervelt, C.A.1
  • 24
    • 0015300678 scopus 로고
    • Adiabatic instability in the orthogonal cutting of steel
    • Lemaire, J.C., and Backofen, W.A., 1972, "Adiabatic Instability in the Orthogonal Cutting of Steel," Metall. Trans. A, 3A, pp. 477-481.
    • (1972) Metall. Trans. A , vol.3 A , pp. 477-481
    • Lemaire, J.C.1    Backofen, W.A.2
  • 29
    • 0033097194 scopus 로고    scopus 로고
    • Mechanical properties and microstructural features of AISI 4340 high-strength steel under quenched and tempered conditions
    • Lee, W.-S., and Su, T.-T. 1999, "Mechanical Properties and Microstructural Features of AISI 4340 High-strength Steel Under Quenched and Tempered Conditions," J. Mater. Process. Technol., 87, pp. 198-206.
    • (1999) J. Mater. Process. Technol. , vol.87 , pp. 198-206
    • Lee, W.-S.1    Su, T.-T.2
  • 30
    • 0031680090 scopus 로고    scopus 로고
    • Plastic deformation and fracture behaviour of Ti-6Al-4V alloy loaded with high strain rate under various temperatures
    • Lee, W.-S., and Lin, C.-F., 1998, "Plastic Deformation and Fracture Behaviour of Ti-6Al-4V Alloy Loaded with High Strain Rate Under Various Temperatures," Mater. Sci. Eng., A241, pp. 48-59.
    • (1998) Mater. Sci. Eng. , vol.A241 , pp. 48-59
    • Lee, W.-S.1    Lin, C.-F.2
  • 31
    • 0031103520 scopus 로고    scopus 로고
    • Dynamic ductile rupture under conditions of plane strain
    • Zhou, M., and Clifton, R.J., 1997, "Dynamic Ductile Rupture under Conditions of Plane Strain," Int. J. Impact Eng., 19(3), pp. 189-206.
    • (1997) Int. J. Impact Eng. , vol.19 , Issue.3 , pp. 189-206
    • Zhou, M.1    Clifton, R.J.2
  • 32
    • 0040350094 scopus 로고
    • Ductile failure as a result of a void-sheet instability: Experimental and computational modelling
    • Bandstra, J.P., Goto, D.M., and Koss, D.A., 1998, "Ductile Failure as a Result of a Void-Sheet Instability: Experimental and Computational Modelling," Mater. Sci. Eng., A249, pp. 46-54.
    • (1988) Mater. Sci. Eng. , vol.A249 , pp. 46-54
    • Bandstra, J.P.1    Goto, D.M.2    Koss, D.A.3
  • 33
    • 0019243256 scopus 로고
    • A new mechanism of plastic flow
    • Shaw, M.C., 1980, "A New Mechanism of Plastic Flow," Int. J. Mech. Sci., 22, pp. 673-686.
    • (1980) Int. J. Mech. Sci. , vol.22 , pp. 673-686
    • Shaw, M.C.1


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.