Micro- and nanofabrication processes for hybrid synthetic and biological system fabrication

IEEE Transactions on Advanced Packaging

Volumn 28, Issue 4, 2005, Pages 584-593

  Verma, Vivek ^a   Hancock, William O ^b   Catchmark, Jeffrey M ^a  

^a The Pennsylvania State University   (United States)

^b PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

Biocompatibility; Biological systems; Casein; Hybrid systems; Kinesin; Microfabrication; Microtubules; Nanofabrication; Polymethylmethacrylate (PMMA) lithography; Protein patterning

Indexed keywords

BIOASSAY; BIOCOMPATIBILITY; BIOLOGICAL MATERIALS; CASEIN; DEPOLYMERIZATION; ELECTRON BEAM LITHOGRAPHY; MICROELECTROMECHANICAL DEVICES; POLYMETHYL METHACRYLATES; PROTEINS;

BIOLOGICAL SYSTEM FABRICATION; KINESIN; MICROFABRICATION; MICROTUBULES; PROTEIN PATTERNING; SYNTHETIC SYSTEM FABRICATION;

NANOTECHNOLOGY;

EID: 28444464489     PISSN: 15213323     EISSN: None     Source Type: Journal    
DOI: 10.1109/TADVP.2005.858302     Document Type: Article

References (34)

1. M. D. Wang, M. J. Schnitzer, H. Yin, R. Landick, J. Gelles, and S. M. Block, "Force and velocity measured for single molecules of RNA polymerase," Science, vol. 282, pp. 902-907, 1998.
2. G. D. Bachand and C. D. Montemagno, "Constructing organiclinorganic NEMS devices powered by biomolecular motors," Biomed. Microdevices, vol. 2, pp. 179-184, 2000.
3. C. D. Montemagno and G. D. Bachand, "Constructing nanomechanical devices powered by biomolecular motors," Nanotechnol., vol. 10, pp. 225-231, 1999.
4. B. Ilic and H. G. Craighead, "Topographical patterning of chemically sensitive biological materials using a polymer-based dry lift-off," Biomed. Microdevices, vol. 2, no. 4, pp. 317-322, 2000.
5. F. D. Warner and J. R. McIntosh, Cell Movement, Volume 2, Kinesin, Dynein and Microtubule Dynamics. New York: Alan R. Liss, 1989.
6. R. D. Vale and R. J. Fletterick, "The design plan of kinesin motors," Annu. Rev. Cell Dev. Boil., vol. 12, pp. 745-777, 1997.
7. J. Howard, "The movement of kinesin along microtubules," Ann. Rev. Physiol., vol. 58, pp. 703-729, 1996.
8. E. Nogales, S. G. Wolf, and K. H. Downing, "Structure of the op tubulin dimer by electron crystallography," Nature, vol. 391, pp. 199-203, 1998.
9. Madou, Fundamental of Microfabrication. Boca Raton, FL: CRC, 1997.
10. K. J. Böhm, R. Stracke, M. Baum, M. Zieren, and E. Unger, "Effect of temperature on kinesin-driven microtubule gliding and kinesin ATPase activity," Fed. Eur. Biochem. Soc., vol. 466, pp. 59-62, 2000.
11. C. K. Hyon, S. C. Choi, S. W. Hwang, D. Ahn, Y. Kim, and E. K. Kim, "Direct nanometer-scale patterning by the cantilever oscillation of and atomic force microscope," Appl. Phys. Lett., vol. 75, no. 2, 1999.
12. H. Hiroshima, S. Okayama, M. Ogura, M. Komuro, H. Nakazawa, Y. Nakagawa, K. Ohi, and K. Tanaka, "Electron beam writing and direct processing system for nanolithography," Nuclear Instrum. Methods Phys. Res. A, vol. 363, pp. 73-78, 1995.
13. C. T. Salling and M. G. Lagally, "Fabrication of atomic-scale structures on Si(001) surfaces," Science, vol. 265, pp. 502-506, 1994.
14. R. M. Silver, E. E. Ehrichs, and A. L. d Lozanne, "Direct writing of submicron metallic features with a scanning tunneling microscope," Appl. Phys. Lett., vol. 51, no. 4, pp. 247-249, 1987.
15. K. Svoboda and S. M. Block, "Force and velocity measured for single kinesin molecules," Cell, vol. 77, pp. 773-784, 1994.
16. E. Meyhofer and J. Howard, "The force generated by a single kinesin molecule against an elastic load," Proc. Nat. Acad. Sci. USA, vol. 92, pp. 574-578, 1995.
17. C. M. Coppin, D. W. Pierce, L. Hsu, and R. D. Vale, "The load dependence of Kinesin's mechanical cycle," Proc. Natl. Acad. Sci. USA, vol. 94, pp. 8539-8544, 1997.
18. W. O. Hancock and J. Howard, "Processivity of the motor protein kinesin requires two heads," J. Cell Biol., vol. 140, pp. 1395-1405, 1998.
19. Y. Hiratsuka, T. Tada, K. Oiwa, T. Kanayama, and T. Q. Uyeda, "Controlling the direction of kinesin-driven microtubule movements along microlithographic tracks," Biophys. J., vol. 81, pp. 1555-1561, 2001.
20. R. Stracke, K. J. Bohm, J. Burgold, H. J. Schacht, and E. Unger, "Physical and technical parameters determining the functioning of a kinesin-based cell-free motor system," Nanotechnol., vol. 11, pp. 52-56, 2000.
21. S. G. Moorjani, L. Jia, T. N. Jackson, and W. O. Hancock, "Lithographically patterned channels spatially segregate kinesin motor activity and effectively guide microtubule movements," Nano Lett., vol. 3, no. 5, pp. 633-637, 2003.
22. D. C. Turner, C. Chang, K. Fang, S. L. Brandow, and D. B. Murphy, "Selective adhesion of functional microtubules to patterned silane surfaces," Biophys. J., vol. 69, pp. 2782-2789, 1995.
23. L. Limberis, J. J. Magda, and R. J. Stewart, "Polarized alignment and surface immobilization of microtubules for kinesin-powered nanodevices," Nano Lett., vol. 1. pp. 277-280, 2001.
24. T. B. Brown and W. O. Hancock, "A polarized microtubule array for kinesin-powered nanoscale assembly and force generation," Nano Lett., vol. 2, no. 10, pp. 1131-1135, 2002.
25. J. R. Dennis, J. Howard, and V. Vogel, "Molecular shuttles: Directed motion of microtubules along nanoscale kinesin tracks," Nanotechnol., vol. 10, pp. 232-236, 1999.
26. A. S. Blawas and W. M. Reichert, "Protein patterning," Biomater., vol. 19, pp. 595-609, 1998.
27. A. Douvas, P. Argitis, K. Misiakos, D. Dimotikali, P. S. Petrou, and S. E. Kakabakos, "Biocompatible photolithographic process for the patterning of biomolecules," Biosens. Bioelectron., vol. 17, pp. 269-278, 2002.
28. C. D. Diakoumakos, A. Douvas, I. Raptis, S. Kakabakos, G. Terzoudi, and P. Argitis, "Dilute aqueous base developable resists for environmentally friendly and biocompatible processes," Microelectron. Eng., vol. 61-62, pp. 819-827, 2002.
29. J. H. Ward, R. Bashir, and N. A. Peppas, "Micropatterning of biomedical polymer surfaces by novel UV polymerization techniques," J. Biomed. Mat. Res., vol. 56. pp. 351-360, 2001.
30. G. D. Bachand, R. K. Soong, H. P. Neves, A. Olkhovets, H. G. Craighad, and C. D. Montemagno, "Precision attachment of individual F1-ATPase biomolecular motors on nanofabricated substrates," Nano Lett., vol. 1, no. 1, pp. 42-44, 2001.
31. C. Mahanivong, J. P. Wright, M. Kekic, D. K. Pham, C. D. Romedios, and D. V. Nicolau, "Manipulation of the motility of protein molecular motors on microfabricated substrates," Biomed. Micodevices, vol. 4, no. 2, pp. 111-116, 2002.
32. C. Brunner, K. H. Ernst, H. Hess, and V. Vogel, "Lifetime of biomolecules in polymer-based hybrid nanodevices," Nanotechnol., vol. 15, pp. S540-S548, 2004.
33. R. C. Williams Jr and J. C. Lee, "Preparation of tubulin from brain," Methods Enzymol, pt. B, vol. 85, pp. 376-385, 1982.
34. A. A. Hyman, "Preparation of marked microtubules for the assay of the polarity of microtubule-based motors by fluorescence," J. Cell Sci. Suppl., vol. 14, pp. 125-127, 1991.