Large eddy simulation of flow and heat transfer in the 180° bend region of a stationary ribbed gas turbine internal cooling duct

Proceedings of the ASME Turbo Expo

Volumn 3 PART A, Issue , 2005, Pages 481-493

  Sewall, Evan A ^a   Tafti, Danesh K ^a  

^a State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

HEAT TRANSFER AUGMENTATION; LARGE EDDY SIMULATIONS; OUTFLOW EXTENSION; RIBBED DUCT;

COMPUTER SIMULATION; DUCTS; EDDY CURRENTS; HEAT TRANSFER; KINETIC ENERGY; PRESSURE DROP; VORTEX FLOW;

COOLING SYSTEMS;

EID: 27744603775     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2005-68518     Document Type: Conference Paper

References (59)

1. Metzger, D.E., Sahm, M.K., 1986, "Heat Transfer Around Sharp 180-deg Turns in Smooth Rectangular Channels," ASME Journal of Heat Transfer, 108, pp. 500-506.
2. Park, C.W., Lau, S.C., 1998, "Effect of Channel Orientation of Local Heat (Mass) Transfer Distributions in a Rotating Two-Pass Square Channel With Smooth Walls," ASME Journal of Heat Transfer, 120, pp. 624-632.
3. Schabacker, J., Boles, A., 1998, "PIV Investigation of the Flow Characteristics in an Internal Coolant Passage with Two Ducts Connected by a Sharp 180° Bend," Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, ASME Paper No. 98-GT-544.
4. Liou, T.-M., Tzeng, Y.-Y., Chen, C.-C., 1999, "Fluid Flow in a 180 deg Sharp Turning Duct With Different Divider Thicknesses," ASME Journal of Turbomachinery, 121, pp. 569-576.
5. Mochizuki, S., Takamura, J., Yamawaki, S., Yang, W.-J., 1994, "Heat Transfer in Serpentine Flow Passages With Rotation," ASME Journal of Turbomachinery, 116, pp. 133-140.
6. d turn channels by quantitative infrared thermography," Rev. Gén. Therm., 37, pp. 644-652.
7. Besserman, D.L., Tanrikut, S., 1992, "Comparison of Heat Transfer Measurements With Computations for Turbulent Flow Around a 180 deg Bend," ASME Journal of Turbomachinery, 114, pp. 865-871.
8. Song, B., Amano, R.S., 2000, "Application of Non-Linear k-ω Model to the Turbulent Flow Inside a Sharp U-Bend," Proceedings of the ASME Turbo Expo 2000, Munich, Germany, ASME Paper No. 2000-GT-0225.
9. Gu, X., Wu, H.-W., Schock, H.J., Shih, T.I.-P., 2002, "Two-Equation Versus Reynolds-Stress Modeling in Predicting Flow and Heat Transfer in a Smooth U-Duct with and without Rotation," Proceedings of the ASME Turbo Expo 2002, Amsterdam, The Netherlands, ASME Paper No. GT-2002-30616.
10. Son, S.Y., Kihm, K.D., Han, J.-C., 2002, "PIV flow measurements for heat transfer characterization in two-pass square channels with smooth and 90° ribbed walls," International Journal of Heat and Mass Transfer, 45, pp. 4809-4822.
11. Liou, T.-M., Chen, M.-Y., Tsai, M.-H., 2002, "Fluid Flow and Heat Transfer in a Rotating Two-Pass Square Duct With In-Line 90-deg Ribs," ASME Journal of Turbomachinery, 124, pp. 260-268.
12. Tse, D.G.N., Steuber, GD., 1997, "Flow in a Rotating Square Serpentine Coolant Passage with Skewed Trips," Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, Orlando, Florida, ASME Paper No. 97-GT-529.
13. Iacovides, H., Jackson, D.C., Kelemenis, G., Launder, B.E., Yuan, Y.-M., 2001, "Flow and heat transfer in a rotating U-bend with 45° ribs," International Journal of Heat and Fluid Flow, 22, pp. 308-314.
14. Chanteloup, D., Juaneda, Y., Bölcs, A., 2002, "Combined 3D Flow and Heat Transfer Measurements in a 2-Pass Internal Coolant Passage of Gas Turbine Airfoils," Proceedings of the ASME Turbo Expo 2002, Amsterdam, The Netherlands, ASME Paper No. GT-2002-30214.
15. Servouse, Y., Sturgis, J.C., 2003, "Heat Transfer and Flow Field Measurements in a Rib-Roughened Branch of a Rotating Two-Pass Duct," Proceedings of the ASME Turbo Expo 2003, Atlanta, Georgia, ASME Paper No. GT2003-38048.
16. Ekkad, S.V., Han, J.-C., 1997, "Detailed heat transfer distributions in two-pass square channels with rib turbulators," International Journal of Heat and Mass Transfer, 40, pp. 2525-2537.
17. Ekkad, S.V., Pamula, G., Shantiniketanam, M., 2000, "Detailed heat transfer measurements inside straight and tapered two-pass channels with rib turbulators," Experimental Thermal and Fluid Science, 22, pp. 155-163.
18. Chandra, P.R., Han, J.C., Lau, S.C., 1988, "Effect of Rib Angle on Local Heat/Mass Transfer Distribution in a Two-Pass Rib-Roughened Channel," ASME Journal of Turbomachinery, 110, pp. 233-241.
19. Mochizuki, S., Murata, A., Shibata, R., Yang, W.-J., 1999, "Detailed measurements of local heat transfer coefficients in turbulent flow through smooth and rib-roughened serpentine passages with a 180° sharp bend," International Journal of Heat and Mass Transfer, 42, pp. 1925-1934.
20. Han, J.C., Chandra, P.R., Lau, S.C., 1988, "Local Heat/Mass Transfer Distributions Around Sharp 180 deg Turns in Two-Pass Smooth and Rib-Roughened Channels," ASME Journal of Heat Transfer, 110, pp. 91-98.
21. Zhao, C.Y., Tao, W.Q., 1997, "A Three Dimensional Investigation on Turbulent Flow and Heat Transfer Around Sharp 180-Deg Turns in Two-Pass Rib-Roughened Channels," International Journal of Heat and Mass Transfer, 24, pp. 587-596.
22. Bonhoff, B., Tomm, U., Johnson, B.V., Jennions, I., 1997, "Heat Transfer Predictions for Rotating U-Shaped Coolant Channels with Skewed Ribs and with Smooth Walls," Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, Orlando, Florida, ASME Paper No. 97-GT-162.
23. Stephens, M.A., Shin, T.I.-P., 1997, "Computation of Compressible Flow and Heat Transfer in a Rotating Duct with Inclined Ribs and a 180-Degree Bend," Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, Orlando, Florida, ASME Paper No. 97-GT-192.
24. Shih, T.I.-P., Lin, Y.-L., Stephens, M.A., Chyu, M.K., 1998, "Flow and Heat Transfer in a Ribbed U-Duci under Typical Engine Conditions," Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, ASME Paper No. 98-GT-213.
25. Jang, Y.-J., Chen, H.-C., Ran, J.-C., 2000, "Flow and Heat Transfer in a Rotating Square Channel with 45° Angled Ribs by Reynolds Stress Turbulence Model," Proceedings of the ASME Turbo Expo 2000, Munich, Germany, ASME Paper No. 2000-GT-0229.
26. Lin, Y.-L., Shih, T.I.-P., Stephens, M.A., Chyu, M.K., 2001 "A Numerical Study of Flow and Heat Transfer in a Smooth and Ribbed U-Duct With and Without Rotation," ASME Journal of Heat Transfer, 123, pp. 219-232.
27. Al-Qahtani, M., Jang, Y.-J., Chen, H.-C., Han, J.-C., 2002, "Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels With 45-deg Rib Turbulators," ASME Journal of Turbomachinery, 124, pp. 242-250.
28. Ciofalo, M., Collins, M.W., 1992, "Large-Eddy Simulation of Turbulent Flow and Heat Transfer in Plane and Rib-Roughened Channels," International Journal for Numerical Methods in Fluids, 15, pp. 453-489.
29. Braun, H., Neumann, H., Mitra, N.K., 1999, "Experimental and Numerical Investigation of Turbulent Heat Transfer in a Channel with Periodically Arranged Rib Roughness Elements," Experimental Thermal and Fluid Science, 19, pp. 67-76.
30. Murata, A., Mochizuki, S., 2000, "Large Eddy Simulation with a Dynamic Subgrid-Scale Model of Turbulent Heat Transfer in an Orthogonally Rotating Rectangular Duct with Transverse Rib Turbulators," International Journal of Heat and Mass Transfer, 43, pp. 1243-1259.
31. Murata, A., Mochizuki, S., 2001, "Comparison between Laminar and Turbulent Heat Transfer in a Stationary Square Duct with Transverse or Angled Rib Turbulators," International Journal of Heat and Mass Transfer, 44, pp, 1127-1141.
32. Takahashi, T., Watanabe, K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a Rectangular Channel with Crossed Angled Ribs," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria, ASME Paper No. GT2004-53673.
33. Tang, X.-L, Qian, Z.-D., Wu, Y.-L., Liu, S.-H., Yang, F., 2004, "An Improved Dynamic Subgrid-Scale Stress Model," Journal of Hydrodynamics, 16, pp. 276-282.
34. Rütten, F., Meinke, M., Schröder, W., 2001, "Large-Eddy Simulations of 90° Pipe Bend Flows," Journal of Turbulence, 2, pp. 1-14.
35. Sewall, E.A., Tafti, D.K., 2004, "Large Eddy Simulation of the Developing Region of a Stationary Ribbed Internal Turbine Blade Cooling Channel," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria, ASME Paper No. GT2004-53832.
36. Murata, A., Mochizuki, S., 2001, "Effect of Centrifugal Buoyancy on Turbulent Heat Transfer in an Orthogonally Rotating Square Duct with Transverse or Angled Rib Turbulators," International Journal of Heat and Mass Transfer, 44, pp. 2739-2750.
37. Murata, A., Mochizuki, S., 2003, "Effect of Cross-Sectional Aspect Ratio on Turbulent Heat Transfer in an Orthogonally Rotating Rectangular Duct with Angled Rib Turbulators," International Journal of Heat and Mass Transfer, 46, pp. 3119-3133.
38. Jordan, S.A., 2003, "The Turbulent Character and Pressure Loss Produced by Periodic Symmetric Ribs in a Circular Duct," International Journal of Heat and Fluid Flow, 24, pp. 795-806.
39. Cui, J., Patel, V., Lin, C.-L., 2003, "Large-Eddy Simulation of Turbulent Flow in a Channel with Rib Roughness," International Journal of Heat and Fluid Flow, 24, pp. 372-388.
40. Saha, A.K., Acharya, S., 2003, "Flow and Heat Transfer in an Internally Ribbed Duct with Rotation: An Assessment of LES and URANS," Proceedings of the ASME Turbo Expo 2003, Atlanta, Georgia, ASME Paper No. GT2003-38619.
41. Tyagi, M., Acharya, S., 2004, "Large Eddy Simulations of Flow and Heat Transfer in Rotating Ribbed Duct Flows," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria, ASME Paper No. GT2004-53401.
42. Ahn, J., Choi, H., Lee, J.S., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a Channel Roughened by Square or Semicircle Ribs," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria, ASME Paper No. GT2004-53924.
43. Watanabe, K., Takahashi, T., 2002, "LES Simulation and Experimental Measurement of Fully Developed Ribbed Channel Flow and Heat Transfer," Proceedings of the ASME Turbo Expo 2002, Amsterdam, The Netherlands, ASME Paper No. GT-2002-30203.
44. Sewall, E.A., Tafti, D.K., 2004, "Large Eddy Simulation of the Developing Region of a Rotating Ribbed Internal Turbine Blade Cooling Channel," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria, ASME Paper No. GT2004-53833.
45. Murata, A., Mochizuki, S., 2004, "Large eddy simulation of turbulent heat transfer in a rotating two-pass smooth square channel with sharp 180° turns," International Journal of Heat and Mass Transfer, 47, pp. 683-698.
46. Murata, A., Mochizuki, S., 2004, "Effect of Rib orientation and channel rotation on turbulent heat transfer in a two-pass square channel with sharp 180° turns investigated by using large eddy simulation," International Journal of Heat and Mass Transfer, 47, pp. 2599-2618.
47. Murata, A., Mochizuki, S., 2004, "Centrifugal buoyancy effect on turbulent heat transfer in a rotating two-pass smooth square channel with sharp 180-deg turns," International Journal of Heat and Mass Transfer, 47, pp. 3215-3221.
48. Murata, A., Mochizuki, S., 2004, "Aiding and opposing contributions of centrifugal buoyancy on turbulent heat transfer in a two-pass transverse- or angled-rib-roughened channel with sharp 180° turns," International Journal of Heat and Mass Transfer, 47, pp. 3721-3743.
49. Germano, M., Piomelli, U., Moin, P., Cabot, W.H., 1991, "A dynamic subgrid-scale eddy viscosity model," Physics of Fluids A. 3, pp. 1760-1765.
50. Tafti, D.K., 2005, "Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades," International Journal of Heat and Fluid Flow, 26, pp. 92-104.
51. Tafti, D.K., 2001, "GenIDLEST - A Scalable Parallel Computational Tool for Simulating Complex Turbulent Flows," Proceedings of the ASME Fluids Engineering Division, FED, 256, ASME-IMECE, New York.
52. Abdel-Wahab, S., Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a 90° Ribbed Duct with Rotation - Effect of Coriolis Forces," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria, ASME Paper No. GT2004-53796.
53. Abdel-Wahab, S., Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a 90° Ribbed Duct with Rotation - Effect of Buoyancy Forces," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria, ASME Paper No. GT2004-53799.
54. Abdel-Wahab, S., and Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a Staggered 45° Ribbed Duct," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria, ASME Paper No. GT2004-53800.
55. Incropera, F.P., and DeWitt, D.P., 2002, Fundamentals of Heat and Mass Transfer, fifth edition, John Wiley and Sons, New York.
56. Sewall, E.A., Tafti, D.K., Graham, A., Thole, K.A., 2005, "Experimental Validation of Large Eddy Simulations of Flow and Heat Transfer in a Stationary Ribbed Duct," Submitted to International Journal of Heat and Fluid Flow.
57. Han, J.C., 1988, "Heat Transfer and Friction Characteristics in Rectangular Channels With Rib Turbulators," ASME Journal of Heat Transfer, 110, pp. 321-328.
58. Fann, S., Yang, W.-J., Zhang, N., 1994, "Local Heat Transfer in a Rotating Serpentine Passage with Rib-Roughened Surfaces," International Journal of Heat and Mass Transfer, 37, pp. 217-228.
59. Taslim, M.E., Wadsworth, C.M., 1997, "An Experimental Investigation of the Rib Surface-Averaged Heat Transfer Coefficient in a Rib-Roughened Square Passage," ASME Journal of Turbomachinery, 119, pp. 381-389.