Large eddy simulation of flow and heat transfer in a rectangular channel with crossed angled ribs

Proceedings of the ASME Turbo Expo 2004

Volumn 3, Issue , 2004, Pages 623-632

  Takahashi, Toshihiko ^a   Watanabe, Kazunori ^a  

^a CENTRAL RESEARCH INSTITUTE OF ELECTRIC POWER INDUSTRY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CHANNEL FLOW; COOLING; FRICTION; GAS TURBINES; HYDRAULICS; REYNOLDS NUMBER; TURBOMACHINE BLADES; VORTEX FLOW;

CROSS SECTIONS (CS); LARGE EDDY SIMULATION (LES); RECTANGULAR CHANNELS; RIBS;

HEAT TRANSFER;

EID: 10244245024     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-53673     Document Type: Conference Paper

References (35)

1. Han, J.C., Glicksman, L.R., and Rohsenow, W.M., 1978, "An Investigation of Heat Transfer and Friction for Rib-Roughened Surfaces," Int. J. Heat Transfer., 21-7, pp.1143-1156.
2. Han, J.C., Park, J.S., and Lei, C.K., 1985, "Heat Transfer Enhancement in Channels with Turbulence Promotors," Trans. ASME, J. Eng. For Gas Turbines and Power, 107, pp.628-635.
3. Taslim, T.M., "Friction Factors and Heat Transfer Coefficients in Turbulated Cooling Passages of Different Aspect Ratios, Part 1: Experimental Results," AIAA paper 87-2009.
4. Han, J.C., Ou, S., Park, J.S., 1989 "Development Heat Transfer in Rectangular Channels with Rib Turbulators," Int. J. Heat Mass Transfer, 31, pp.183-195.
5. Han, J.C., Ou, S., Park, J.S. and Lei, C.K., 1989 "Augmented Heat Transfer in Rectangular Channels of Narrow Aspect Ratios with Rib Turbulators," Int. J. Heat Mass Transfer, 32-9, pp.1619-1629.
6. Han, J.C., Zhang, Y.M. and Lee, C.P., 1991, "Augmented Heat Transfer in Square Channels With Parallel, Crossed, and V-Shaped Angled Ribs" Trans. ASME, J. Heat Transfer, 113, pp.590-596.
7. Taslim, T.M., 1994 "Experimental Heat Transfer and Friction in channels with Angled V-shaped and Discrete Ribs on two opposite walls," ASME paper 94-GT-163AIAA.
8. Kawaike, K., Anzai, S., Takehara, I., Sato, M., Matsuzaki, H. and Kobayashi, Y., 1995, "Advanced Internal Cooling of Turbine Nozzles and Blades for 1500 degree C-class Gas Turbine," 95-YOKOHAMA-IGTC-36, 2, pp.247-256.
9. Wagner, J.H., Johnson, B.V., Graziani, R.A. and Yeh, F.C., C.P., 1992, "Heat Transfer in Rotaing Serpentaine Passages with Trips Normal to the Flow," Trans. ASME, J. Turbomachinery, 114, pp.847-857.
10. Fann S., Yann W.J. and Zhang N., 1994, "Local heat transfer in a rotating serpentine passage with rib-roughened surfaces," Int. J. Heat Mass Transfer, 37-2, pp.217-228.
11. Zhang, Y.M., Han, J.C. and Parsons, J.A., "Surface Heating Effect on Local Heat Transfer in an Rotating Two-Pass Square Channel with 60-deg. Angled Rib Turbulators," 1993, ASME paper 93-GT-336.
12. Mochizuki, S., Murata, A. and Fukunaga, M., 1995, "Effects of Rib Arrangement on Pressure Drop and Heat Transfer in a Rib-Roughened Channel with a Sharp 180° turn,"ASME paper 95-CTP-3.
13. Rau, G., Cakan, M., Moeller, D. and Arts, T., 1998, "The Effect of Periodic Ribs on the Local Aerodynamic and Heat Transfer Performance of a Straight Cooling Channel," Trans. ASME, J. Turbomachinery, 120, pp.368-375.
14. Ekkad, S. V., Han, J.C., 1997, "Detailed heat transfer distributions in two-pass square channels with rib turbulators," Int. J. Heat Mass Transfer, 40,-11, pp.2525-2537.
15. Panigrahi, P.K. and Acharya, S., 1997, "Mechanisms of Turbulence Tranport in a Turbine Blade Coolant Passage with RibTurbulator," ASME paper 97-GT-119.
16. Chanteloup, D., Juaneda, Y and Boles, A., 2002, "Combined 3D Flow and Heat Transfer Measurements in a 2-pass Internal Coolant Pasage of Gas Turbine Airfoils," ASME paper GT-2002-30214.
17. Casarsa, L., Cakan, M. and Arts, T., 2002, "Characterization of the Velocity and Heat Transfer Fields in an Internal Cooling Channel with High Blockage Ratio," ASME paper GT-2002-30207.
18. Azad, GS., Uddin, M.J. and Han, J.C., 2002, "Heat Transfer in a Two-Pass Rectangular Rotating Channel with 45-deg Angled Rib Tabulators," Trans. ASME, J. Turbomachinery, 124, pp.251-258.
19. Liou, T.M., Chen, M.Y. and Tsai, M.H., 2002, "Fluid Flow and Heat Transfer in a Rotating Two-Pass Square Duct with In-Line 90-deg Ribs," Trans. ASME, J. Tourbomachinery, 124, pp.260-268.
20. Griffith, T.S., Al-Hadhrami, A. and Han, J.C., 2002, "Heat Transfer in Rotating Rectangular Cooling Channels(AR=4) with Angled Ribs," Trans. ASME, J. Heat Transfer, 124, pp.617-625.
21. Ligrani, P.M. and Mahmood, G.I., 2003, "Spatiaaly-Resolved Heat Transfer and Friction Factors in a Rectangular Channel with 45deg Angled Crossed-Rib Turbulators," Trans. ASME, J. Turbomachinery, 125, pp. 575-584.
22. Won, S.Y. and Ligrani, P.M., 2004, "Comparisons of flow structure and local Nusselt numbers in channels with parallel-and crossed-rib turbulators," Int. J. Heat Mass Transfer, 47, pp. 1573-1586.
23. Prakash, C. and Zerkle, R., 1993, "Prediction of Turbulent Flow and Heat Transfer in a Rbbed Rectangular Duct with and witout Rotation," ASME paper 93-GT-206.
24. Stephens, M.A. and Civinskas, K.C., 1995, "Computation of Flow and Heat Transfer in a Rectangular Channel with Ribs," AIAA paper 95-0180.
25. Jang, Y. J., Chen H. C. and Han, J.C., 2000, "Flow and Heat Transfer in a Rotating Square Channel with 45 deg. Angled Ribs by Reynolds Stress Turbulence Model," ASME paper 2000-GT-0229.
26. Al-Qahtani, M., Jang, Y. J., Chen H. C. and Han, J.C., 2000, "Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels with 45 deg. Rib Turbulators," ASME paper 2001-GT-0187.
27. Al-Qahtani, M., Chen, H.C. and Han, J.C., 2003, "A Numerical Study of Flow and Heat Transfer in Rotatng Rectangular Channels (AR=4) with45 deg Rib Turbulators by Reynolds Stress Turbulence Model," Trans. ASME, J. Heat Transfer, 125, pp. 19-26.
28. Ciofalo, M and Collins, M. W., "Large-eddy simulation of turbulent flow and heat transfer in plane and rib-roughened channels," Int. J. for Numerical Methods in Fluids, Vol.15 (1992), pp.453-489.
29. Murata, A. and Mochizuki, S., 2000, "Large Eddy Simulation with a Dynamic Subgrid Scale Model of Turbulent Heat Transfer in an Orthogonally Rotating Rectangular Duct with Transverse or Angled Rib Turbulators," Int. J. Heat Mass Transfer, 43, pp.142-11243-1259
30. Tafti, D.K., 2003, "Large-Eddy Simulation of Heat Transfer in a Ribbed Channel for Internal Cooling of Turbine Blades," ASME paper GT-2003-38122.
31. Watanabe, K., Takahashi, T., 2002, "LES simulation and experiment of fully developed ribbed channel flows," ASME paper GT-2002-30203.
32. Takahashi, T. and Watanabe, K., 2003, "LES and Experiment of Fully Developed Flow and Heat Transfer in a Rectangular Channel with Angled Ribs," Proc. ASME-JSME Thermal Eng. Joint Conf., TED-AJ03-562.
33. Piomelli, U. and Liu, J., "Large-eddy Simulation of Rotating Channel Flows using a Localized Dynamic Model," Phys. Fluids, Vol. 7 (1995), pp. 839-848.
34. Kays, W. M. and Crawford, M. E., "Convection Heat and Mass Transfer (2nd ed.)," McGraw-Hill, 1980, p.243.
35. Webb, R.L., Eckert, E. R.G and Goldstein, R. L., 1971, "Heat Transfer and Friction in Tubes with Repeated-Rib Roughness," Int. J. Heat Mass Transfer, 14, pp.601-617.