Flow and heat transfer in a rotating square channel with 45° angled ribs by reynolds stress turbulence model

Proceedings of the ASME Turbo Expo

Volumn 3, Issue , 2000, Pages

  Jang, Yong Jun ^a   Chen, Hamn Ching ^b   Han, Je Chin ^a  

^a Texas AandM University   (United States)

^b TEXAS A AND M UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CHANNEL FLOW; COMPUTATIONAL FLUID DYNAMICS; NUMERICAL METHODS; REYNOLDS NUMBER; TURBULENCE MODELS;

BODY FITTED COORDINATES; FINITE ANALYTIC METHODS; HEIGHT-TO-HYDRAULIC DIAMETER RATIO; REYNOLDS STRESS TURBULENCE MODEL; SECOND MOMENT TURBULENCE CLOSURE; SECOND-MOMENT CLOSURE MODELING; SURFACE HEAT TRANSFER COEFFICIENT; THREE-DIMENSIONAL FLOW;

HEAT TRANSFER;

EID: 84885323220     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/2000-GT-0229     Document Type: Conference Paper

References (36)

1. Bo, T., Iacovides, H., and Launder, B.E., 1995, "Developing Buoyancy-Modified Turbulent Flow in Ducts Rotating in Orthogonal Mode," Journal of Turbomachinery, Vol. 117, pp. 474-484.
2. Bonhoff, B., Parneix, S., Leusch, J., Johnson, B.V., Schabacker, J., and Bolcs, A., 1999, "Experimental and Numerical Study of Developed Flow and Heat Transfer in Coolant Channels with 45Deg Ribs," International Journal of Heat and Fluid Flow, Vol. 20, pp. 311-319.
3. Bonhoff, B., Tomm, U., Johnson. B.V., and Jennions, I., 1997, "Heat Transfer Predictions For Rotating U Shaped Coolant Channels with Skewed Ribs and with Smooth Walls," ASME Paper 97-GT-162.
4. Chen, H.C. and Chen, M., 1998, "Chimera RANS Simulation of a Berthing DDG-51 Ship in Translational and Rotational Motions," International Journal of Offshore and Polar Engineering, Vol. 8(3), pp.182-191.
5. Chen, H.C. and Korpus, R., 1993, "Multi-block Finite-Analytic Reynolds-Averaged Navier-Stokes Method for 3D Incompressible Flows," ASME Fluids Engineering Conference, FED-Vol. 150, pp. 113-121.
6. Chen, H.C. and Patel, V.C., 1989, "The Flow Around Wing-Body Junctions," Proceedings of the 4th Symposium on Numerical and Physical Aspects of Aerodynamic Flows, Long Beach, CA.
7. Chen, H.C., Patel, V.C., and Ju, S., 1990, "Solutions of Reynolds-Averaged Navier-Stokes Equations for Three-Dimensional Incompressible Flows," Journal of Computational Physics, Vol. 88(2), pp. 305-336.
8. Chen, H.C., 1995a, "Assessment of a Reynolds Stress Closure Model for Appendage-Hull Junction Flows," Journal of Fluids Engineering, Vol. 117(4), pp. 557-563.
9. Chen, H.C., 1995b, "Submarine Flows Studied by Second-Moment Closure," Journal of Engineering Mechanics, Vol. 121(10), pp. 1136-1146.
10. Chen, H.C., Jang, Y.J., and Han, J.C., 1999, "Computation of Flow and Heat Transfer in Rotating Two-Pass Square Channels by a Reynolds Stress Model," ASME Paper 99-GT-174.
11. Chen, H.C., Jang, Y.J., and Han, J.C., 2000, "Computation of Flow and Heat Transfer in Two-Pass Channels with 90o Parallel Ribs," Paper to be presented at the 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-8), Honolulu, Hawaii, March 26-30.
12. Chen, H.C. and Liu, T., 1999, "Turbulent F low Induced by a Full-Scale Ship in Harbor," Journal of Engineering Mechanics, Vol. 125, No. 7, pp. 827-835.
13. Ekkad S.V. and Han, J.C., 1997, "Detailed Heat Transfer Distributions in Two-pass square Channels with Rib Turbulators," Int. J. Heat and Mass Transfer, Vol. 40, No.11, pp. 2525-2537.
14. Han, J.C. and Park, J.S., 1988, "Developing Heat Transfer in Rectangular Channel with Rib Turbulators," Int. J. Heat and Mass Transfer, Vol. 31, No. 1, pp. 183-195.
15. Hubbard, B.J. and Chen, H.C., 1994, "A Chimera Scheme for Incompressible Viscous Flows with Applications to Submarine Hydrodynamics," AIAA Paper 94-2210, 25th AIAA Fluid Dynamics Conference, Colorado Spring, CO.
16. Iacovides, H., Launder, B.E., and Li, H.Y., 1996, "The Computation of Flow Development Through Stationary and Rotating U-ducts of Strong Curvature," Int. J. Heat and Fluid Flow, Vol. 17, pp. 22-33.
17. Iacovides, H. and Raisee, M., 1999, "Recent Progress in the Computation of Flow and Heat Transfer in Internal Cooling Passages of Turbine Blades," International Journal of Heat and Fluid Flow Vol. 20, pp. 320-328.
18. Iacovides, H., 1998, "Computation of Flow and Heat Transfer through Rotating Ribbed Passage," International Journal of Heat and Fluid Flow, Vol. 19, pp. 393-400.
19. Jang, Y.J., Chen, H.C., and Han, J.C., 2000, "Computation of Flow and Heat Transfer in Two-Pass Channels with 60o Ribs," Paper to be presented at AIAA Paper 2000-1036.
20. Johnson, B.V., Wagner, J.H., Steuber, G.D., and Yeh, F.C., 1994, "Heat Transfer in Rotating serpentine Passage with Trips Skewed to the Flow," Journal of Turbomachinery, Vol. 116, pp. 113-123.
21. Kays, W.M. and Crawford, M.E., 1993, Convective Heat and Mass Transfer, Third edition, McGraw Hill.
22. Parsons, J.A., Han, J.C., and Zhang Y.M., 1995, "Effect of Model Orientation and Wall Heating Condition on Local Heat Transfer in a Rotating Two-Pass Square Channel with Rib Turbulators," Int. J. Heat Mass Transfer, Vol. 38, No.7, pp. 1151-1159.
23. Prakash, C and Zerkle, R., 1992, "Prediction of Turbulent Flow and Heat Transfer in a Radially Rotating Square Duct," Journal of Turbomachinery, Vol. 114, pp. 835-846.
24. Prakash, C. and Zerkle, R., 1995, "Prediction of Turbulent Flow and Heat Transfer in a Ribbed Rectangular Duct With and Without Rotation," Journal of Turbomachinery, Vol. 177, pp. 255-264.
25. Rigby, D.L, Steinthorsson, E., and Ameri, A.A., 1997, "Numerical Prediction of Heat Transfer in a Channel with Ribs and Bleed," ASME Paper 97-GT-431.
26. Rigby, D.L., 1998, "Prediction of Heat Mass Transfer in a Rotating Ribbed Coolant Passage with a 180 Degree Turn," ASME Paper 98-GT-329.
27. Schabacker, J., Boelcs, A., and Johnson, B.V., 1999, "PIV Investigation of the Flow Characteristics in an Internal Coolant Passage with 45Deg Rib Arrangement," ASME paper 99-GT-120.
28. Shih, T. I-P., Lin,Y.-L., Stephens, M.A., and Chyu, M.K., 1998, "Flow and Heat Transfer in a Ribbed U-Duct under Typical Engine Conditions," ASME Paper 98-GT-213.
29. Steinbrenner, J.P., Chawner, J.R., and Fouts, C.L., 1990, "The GRIDGEN 3D Multiple Block Grid Generation System," Vols. I & II, WRDC-TR-90-3022, Wright Patterson AFB, Ohio.
30. Stephens, M.A., Shih, T.I-P., and Civinskas, K.C., 1996a, "Computations of Flow and Heat Transfer in a Rotating U-Shaped Square Duct with Smooth Walls," AIAA Paper No. 96-3161.
31. Stephens, M.A., Chyu, M.K., and Shih, T. I-P., 1996b, "Computation of Convective Heat Transfer in a Square Duct with Inclined Ribs of Rounded Cross Section," ASME Paper 96-WA/HT-12.
32. Stephens, M.A. and Shih T. I-P., 1997, "Computation of Compressible Flow and Heat Transfer in a Rotating Duct with Inclined Ribs a 180Deg Bend," ASME Paper 97-GT-192.
33. Stephens, M.A., Shih, T. I-P., and Civinskas, K.C., 1995, "Computation of Flow and Heat Transfer in a Rectangular Channel with Ribs," AIAA Paper 95-0180.
34. Tse, D.G.N. and Steuber G.D., 1997, "Flow in a Rotating Square Serpentine Coolant Passage with Skewed Trips," ASME paper 97-GT-529.
35. Wagner, J.H., Johnson, B.V., Graziani, R.A., and Yeh, F.C., 1992, "Heat Transfer in Rotating Serpentine Passages with Trips Normal to the Flow," Journal of Turbomachinery, Vol. 114, pp. 847-857.
36. Zhang, Y.M., Han, J.C., Parsons, J.A., and Lee, C.P.,1995, "Surface Heating Effect on Local Heat Transfer in a Rotating Two-pass Square Channel with 60Deg Angled Rib Turbulators," ASME Journal of Turbomachinery, Vol. 177, pp. 272-280.