Large eddy simulation of the developing region of a rotating ribbed internal turbine blade cooling channel

Proceedings of the ASME Turbo Expo 2004

Volumn 3, Issue , 2004, Pages 749-764

  Sewall, Evan A ^a   Tafti, Danesh K ^a  

^a State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY CONDITIONS; COMPUTER SIMULATION; COOLING; HEAT TRANSFER; REYNOLDS NUMBER; ROTATION; TURBINES;

AUGMENTATION; BUOYANCY FORCES; LARGE EDDY SIMULATION (LES); TURBINE BLADES;

TURBOMACHINE BLADES;

EID: 10344254301     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-53833     Document Type: Conference Paper

References (46)

1. Han, J.C., and Park, J.S., 1988, "Developing heat transfer in rectangular channels with rib turbulators," International Journal of Heat and Mass Transfer, 31-1, pp. 183-195.
2. Liou, T.-M., and Hwang, J.-J., 1992, "Developing Heat Transfer and Friction in a Ribbed Rectangular Duct With Flow Separation at Inlet," ASME Journal of Heat Transfer, 114, pp. 565-573.
3. Lokai, V.I., and Gunchenko, E.I., 1979, "Heat Transfer over the Initial Section of Turbine Blade Cooling Channels under Conditions of Rotation," Thermal Engineering, 26-2, pp. 93-95.
4. Johnson, A.R., and Morris, W.D., 1984, "Experimental investigation of the effect of entry conditions and rotation on flow resistance in circular tubes rotating about a parallel axis," International Journal of Heat and Fluid Flow, 5-2, pp. 121-127.
5. Elfert, M., 1994, "The Effect of Rotation and Buoyancy on Flow Development in a Rotating Circular Coolant Channel with Radially Inward Flow," Experimental Thermal and Fluid Science, 9-2, pp. 206-214.
6. Bo, T., Iacovides, H., and Launder, B.E., 1995 "Developing Buoyancy-Modified Turbulent Flow in Ducts Rotating in Orthogonal Mode," ASME Journal of Turbomachinery, 117, pp. 474-484.
7. Yan, W.M., and Soong, C.Y., 1995, "Simultaneously developing mixed convection in radially rotating rectangular ducts," International Journal of Heat and Mass Transfer, 38-4, pp. 665-677.
8. Soong, C.Y., and Van, W.M., 1999 "Development of secondary flow and convective heat transfer in isothermal/isoflux rectangular ducts rotating about a parallel axis," International Journal of Heat and Mass Transfer, 42, pp. 497-510.
9. Dutzler, G.K., Pettersson-Reif, B.A., and Andersson, H.I., 2000, "Relaminarization of turbulent flow in the entrance region of a rapidly rotating channel," International Journal of Heat and Fluid Flow, 21, pp. 49-57.
10. Fann, S., Yang, W.-J., and Zhang, N., 1994, "Local heat transfer in a rotating serpentine passage with rib-roughened surfaces," International Journal of Heat and Mass Transfer, 37-2, pp. 217-228.
11. Parsons, J.A., Han, J.-C., and Zhang, Y., 1994, "Wall heating effect on local heat transfer in a rotating two-pass square channel with 90° rib turbulators," International Journal of Heat and Mass Transfer, 37-9, pp. 1411-1420.
12. Hibbs, R.G., Acharya, S., Chen, Y., and Nikitopoulos, D.E., 1996, "Heat/Mass Transfer Distribution in a Rotating, Two-Pass Channel with Smooth and Ribbed walls," Proceedings of the ASME Heat Transfer Conference, HTD, 324-2, pp. 123-136.
13. Chang, S.W., and Morris, W.D., 2003 "Heat transfer in a radially rotating square duct fitted with in-line transverse ribs," International Journal of Thermal Sciences, 42, pp. 267-282.
14. Jang, Y.-J., Chen, H.-C., and Han, J.-C., 2000, "Flow and Heat Transfer in a Rotating Square Channel With 45 deg Angled Ribs by Reynolds Stress Turbulence Model," ASME Journal of Turbomachinery, 123, pp. 124-132.
15. Al-Qahtani, M., Chen, H.-C., and Han, J.-C., 2002, "A Numerical Study of Flow and Heat Transfer in Rotating Rectangular Channels (AR=4) With 45° Rib Turbulators by Reynolds Stress Turbulence Model," Proceedings of the ASME Turbo Expo 2002, Amsterdam, The Netherlands.
16. Azad, G.S., Uddin, M.J., Han, J.-C., Moon, H.-K., and Glezer, B., 2002, "Heat Transfer in a Two-Pass Rectangular Rotating Channel With 45-deg Angled Rib Turbulators," ASME Journal of Turbomachinery, 124, pp. 251-259.
17. Al-Qahtani, M., Jang, Y.-J., Chen, H.-C., and Han, J.-C, 2002, "Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels with 45-deg Rib Turbulators," ASME Journal of Turbomachinery, 124, pp. 242-250.
18. Prakash, C., and Zerkle, R., 1995, "Prediction of Turbulent Flow and Heat Transfer in a Ribbed Rectangular Duct With and Without Rotation," ASME Journal of Turbomachinery, 117, pp. 255-264.
19. Okita, Y., and Iacovides, H., 2003, "Comparisons of High-Reynolds-Number EVM and DSM Models in the Prediction of Heat and Fluid Flow of Turbine Blade Cooling Passages," ASME Journal of Turbomachinery, 125, pp. 585-597.
20. Iacovides, H., and Raisee, M., 2001, "Computation of flow and heat transfer in two-dimensional rib-roughened passages, using low-Reynolds-number turbulence models," International Journal of Numerical Methods for Heat & Fluid Flow, 11-2, pp. 138-155.
21. Bonhoff, B., Tomm, U., Johnson, B.V., and Jennions, I., 1997, "Heat Transfer Predictions for Rotating U-Shaped Coolant Channels with Skewed Ribs and with Smooth Walls," Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, Orlando, Florida.
22. Bonhoff, B., Parneix, S., Leusch, J., Johnson, B.V., Schabacker, J., and Bölcs, A., 1999 "Experimental and numerical study of developed flow and heat transfer in coolant channels with 45 degree ribs," International Journal of Heat and Fluid Flow, 20, pp. 311-319.
23. Lin, Y.-L., Shih, T.I.-P., Stephens, M.A., and Chyu, M.K., 2001 "A Numerical Study of Flow and Heat Transfer in a Smooth and Ribbed U-Duct With and Without Rotation," ASME Journal of Heat Transfer, 123, pp. 219-232.
24. Taslim, M.E., Rahman, A., and Spring, S.D., "An Experimental Investigation of Heat Transfer Coefficients in a Spanwise Rotating Channel With Two Opposite Rib-Roughened Walls," ASME Journal of Turbomachinery, 113, pp. 75-82.
25. Wagner, J.H., Johnson, B.V., Graziani, R.A., and Yeh, F.C., 1992, "Heat Transfer in Rotating Serpentine Passages With Trips Normal to the Flow," ASME Journal of Turbomachinery, 114, pp. 847-857.
26. Parsons, J.A., Han, J.-C., and Zhang, Y., 1995, "Effect of model orientation and wall heating condition on local heat transfer in a rotating two-pass square channel with rib tabulators," International Journal of Heat and Mass Transfer, 38-7, pp. 1151-1159.
27. Hsieh, S.-S., Chiang, M.-H., Chen, P.-J., 1997, "Velocity Measurements and Local Heat Transfer in a Rotating Ribbed Two-Pass Square Channel with Uneven Wall Heat Flux," Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, Orlando, Florida.
28. Liou, T.-M., Chen, M.-Y., and Tsai, M.-H., 2002, "Fluid Flow and Heat Transfer in a Rotating Two-Pass Square Duct With In-Line 90-deg Ribs, " ASME Journal of Turbomachinery, 124, pp. 260-268.
29. Liou, T.-M., Chen, M.-Y., Chang, K.-H., 2003, "Spectrum analysis of fluid flow in a rotating two-pass duct with detached 90° ribs," Experimental Thermal and Fluid Science, 27, pp. 313-321.
30. Servouse, Y., and Sturgis, J.C., 2003, "Heat Transfer and Flow Field Measurements in a Rib-Roughened Branch of a Rotating Two-Pass Duct," Proceedings of the ASME Turbo Expo 2003, Atlanta, Georgia.
31. Murata, A., and Mochizuki, S., 1999, "Effect of cross-sectional aspect ratio on turbulent heat transfer in an orthogonally rotating rectangular smooth duct," International Journal of Heat and Mass Transfer, 42, pp. 3803-3814.
32. Pallares, J., and Davidson, L., 2000, "Large-eddy simulations of turbulent flow in a rotating square duct," Physics of Fluids, 12-11, pp. 2878-2894.
33. Pallares, J., and Davidson, L., 2002, "Large-eddy simulations of turbulent heat transfer in stationary and rotating square ducts," Physics of Fluids, 14-8, pp. 2804-2816.
34. Murata, A., and Mochizuki, S., 2000, "Large eddy simulation with a dynamic subgrid-scale model of turbulent heat transfer in an orthogonally rotating rectangular duct with transverse rib turbulators," International Journal of Heat and Mass Transfer, 43, pp. 1243-1259.
35. Abdel-Wahab, S., and Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a 90° Ribbed Duct with Rotation - Effect of Coriolis Forces," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria.
36. Abdel-Wahab, S., and Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a 90° Ribbed Duct with Rotation - Effect of Buoyancy Forces," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria.
37. Germano, M., Piomelli, U., Moin, P., and Cabot, W.H., 1991, "A dynamic subgrid-scale eddy viscosity model," Physics of Fluids A, 3-7, pp. 1760-1765.
38. Najjar, F.M., and Tafti, D.K., 1996, "Study of discrete test filters and finite difference approximations for the dynamic subgrid-scale stress model," Physics of Fluids, 8-4, pp. 1076-1088.
39. Lilly, D.K., 1992, "A proposed modification of the Germano subgrid-scale closure method," Physics of Fluids A, 4-3, pp. 633-635.
40. Moin, P., Squires, K., Cabot, W., and Lee, S., 1991, "A dynamic subgrid-scale model for compressible turbulence and scalar transport," Physics of Fluids A, 3-11, pp. 2746-2757.
41. Tafti, D.K., 2001, "GenIDLEST - A Scalable Parallel Computational Tool for Simulating Complex Turbulent Flows," Proceedings of the ASME Fluids Engineering Division, FED, 256, ASME-IMECE, New York.
42. Abdel-Wahab, S., and Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a Staggered 45° Ribbed Duct," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria.
43. Tafti, D.K., 2003, "Evaluating the Role of Subgrid Stress Modeling in a Ribbed Duct for the Internal Cooling of Turbine Blades," Submitted to ASME Journal of Turbomachinery, October 2003.
44. Incropera, F.P., and DeWitt, D.P., 2002, Fundamentals of Heat and Mass Transfer, fifth edition, John Wiley and Sons, New York.
45. Sewall, E.A., and Tafti, D.K., 2004, "Large Eddy Simulation of the Developing Region of a Stationary Ribbed Internal Turbine Blade Cooling Channel," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria.
46. Tafti, D.K., 2003, "Large-Eddy Simulations of Heat Transfer in a Ribbed Channel for Internal Cooling of Turbine Blades," Proceedings of the ASME/IGTI Turbo Expo 2003, Atlanta, Georgia.