Large eddy simulations of flow and heat transfer in rotating ribbed duct flows

Proceedings of the ASME Turbo Expo 2004

Volumn 3, Issue , 2004, Pages 797-811

  Tyagi, Mayank ^a   Acharya, Sumanta ^a  

^a Louisiana State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; NAVIER STOKES EQUATIONS; NUSSELT NUMBER; PARAMETER ESTIMATION; STABILIZATION; TEMPERATURE MEASUREMENT; VELOCITY MEASUREMENT;

CORIOLIS FORCES; DUCT FLOW; LARGE EDDY SIMULATIONS (LES); RIB TURBULATORS;

HEAT TRANSFER;

EID: 10244255185     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-53924     Document Type: Conference Paper

References (32)

1. Morris, W.D. 1981, Heat transfer and fluid flow in rotating coolant channels, Research Studies Press.
2. Wagner, J.H., Johnson, B.V., Graziani, R.A. and Yeh, F.C. 1992, Heat transfer in rotating serpentine passages with trips normal to the flow, J. Turbomachinery, 114, pp. 847-857.
3. Morris, W.D. and Rahmat-Abadi, K.F. 1996, Convective heat transfer in rotating ribbed tubes, Int. J. Heat and Mass Transfer, 39, pp. 2253-2266.
4. Yamawaki, D., Obi, S. and Masuda, S. 2002, Heat transfer in transitional and turbulent boundary layers with system rotation, Int. J. Heat and Fluid Flow, 23, pp. 186-193.
5. Acharya, S., and Zhou, F. 2001, Flow and Heat Transfer in Dimpled Two-pass Channel, in Heat Transfer in Gas Turbine Systems, Annals of the New York Academy of Sciences, 934, pp. 424-431
6. Hibbs, R., Acharya, S., Chen, Y., Nikitopoulos, D., and Myrum, T. 1998, Heat Transfer in a Two-Pass Internally Ribbed Turbine Blade Coolant Channel with Cylindrical Vortex Generators, J. Turbomachinery, 120, pp. 724-734.
7. Zhou, F., Lagrone J., Acharya S. 2004, Internal Cooling in 4:1 AR Passages at High Rotation Numbers, Paper No. GT2004-53501, IGTI Turbo Expo, Vienna.
8. Han, J. C., and Dutta, S. 2001, Recent Developments in Turbine Blade Internal Cooling, in Heat Transfer in Gas Turbine Systems, Annals of the New York Academy of Sciences, 934, pp. 162-178.
9. Bredberg, J. 1997, Turbine blade internal cooling, Chalmers University, Goteborg.
10. Iacovides, H. and Launder, B. E. 1995, Computational fluid dynamics applied to internal gas-turbine blade cooling: a review, Int. J. Heat and Fluid Flow, 16, pp. 454-470.
11. Naimi, M. and Gessner, F. B. 1997, Calculation of fully developed turbulent flow in rectangular ducts with two opposite roughened walls, Int. J. Heat and Fluid Flow, 18, pp. 471-481.
12. Iacovides, H. 1998, Computation of flow and heat transfer through rotating ribbed passages, Int. J. Heat and Fluid Flow, 19, pp. 393-400.
13. Iacovides, H. and Raisee, M. 1999, Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades, Int. J. Heat and Fluid Flow, 20, pp. 320-328.
14. Saidi, A. and Sunden, B. 1999, Prediction of thermal-hydraulic characteristics of square-sectioned ribbed ducts using an explicit algebraic stress model and a low-Re number turbulence model, Lund Institute of Technology (Preprint).
15. Hermanson, K., Parneix, S. and Von Wolfersdorf, J. 2001, Prediction of pressure loss and heat transfer in internal cooling passages with rotation (Preprint).
16. Jang, Y.-J., Chen, H.-C. and Han, J.-C. 2001, Flow and heat transfer in a rotating square channel with 45° angled ribs by Reynolds stress turbulence model, J. Turbomachinery, 123, pp.124-132.
17. Bonhoff, B., Parniex, S., Leusch, J., Johnson, B.V., Schabacker, J. and Bolcs, A. 1999, Experimental and numerical study of developed flow and heat transfer in coolant channels with 45 degree ribs, Int. J. Heat and Fluid Flow, 20, pp. 311-319.
18. Murata, A. and Mochizuki, S. 2000, Large eddy simulation with a dynamic subgrid -scale model of turbulent heat transfer in an orthogonally rotating rectangular duct with transverse rib turbulators, Int. J. Heat Mass Transfer, 43, pp. 1243-1259.
19. Murata, A. and Mochizuki, S. 2001, Effect of centrifugal buoyancy on turbulent heat transfer in an orthogonally rotating square duct with transverse or angled rib turbulators, Int. J. Heat Mass Transfer, 44, pp. 2739-2750.
20. nd Int. Symp. on Turbulence and Shear Flow Phenomena, 1, pp. 359-364.
21. Roclawski, H. 2001, PIV measurements of channel flow with multiple rib arrangements, MS thesis, University of Kentucky.
22. Roclawski, H., Jacob, J.D., Yang, T. and McDonough, J.M. 2001, Experimental and computational investigation of flow in gas turbine blade cooling passages, AIAA 2001-2925.
23. Miyake, Y, Tsujimoto, K. and Nagai, N. 2002, Numerical simulation of channel flow with a rib-roughened wall, J. Turbulence, 3, No. 35.
24. Moin, P., Squires, K., Cabot, W. and Lee, S. 1991, A dynamic subgrid-scale model for compressible turbulence and scalar transport, Phys. Fluids A 3, 11, pp. 2746-2757.
25. Vreman, B., Guerts, B. and Kuerten, H. 1994, On the formulation of the dynamic mixed subgrid scale model, Phys. Fluids A, 6, pp. 4057-4059.
26. Patankar, S.V., Liu, C.H. and Sparrow, E.M. 1977, Fully developed flow and heat transfer in ducts having streamwise-periodic variations of cross-sectional area, J. Heat Transfer, 99, pp. 180-186.
27. Wang, G. and Vanka, S.P. 1995, Convective heat transfer in periodic wavy passages, Int. J. Heat Mass Transfer, 38, pp. 3219-3230.
28. Wray, A.A. and Hunt, J.C.R. 1989, Algorithms for Classification of Turbulent Structures, Topological Fluid Mechanics: Proceedings of the IUTAM symposium, H.K. Moffat and A. Tsinober, eds., Cambridge University Press, Cambridge, UK, pp. 95-104.
29. Tanaka, M. and Kida, S. 1993, Characterization of Vortex Tubes and Sheets, Phys. Fluids A, 5, pp. 2079-2082.
30. Dubief, Y. and Delcayre, F. 2000, On Coherent-Vortex Identification in Turbulence, J. Turbulence, 1, pp. 1-22.
31. Holmes, P., Lumley, J. L. and Berkooz, G. 1996, Turbulence, coherent structures, dynamical systems and symmetry, Cambridge University Press.
32. Sirovich, L. 1987, Turbulence and the dynamics of coherent structures, Part I-III, Quat. Appl. Math., XLV, pp. 561-590.