Detailed measurements of local heat transfer coefficients in turbulent flow through smooth and rib-roughened serpentine passages with a 180° sharp bend

International Journal of Heat and Mass Transfer

Volumn 42, Issue 11, 1998, Pages 1925-1934

  Mochizuki, S ^a,b   Murata, A ^a,b   Shibata, R ^a,b   Yang, Wen Jei ^a,b  

^a TOKYO UNIVERSITY OF AGRICULTURE AND TECHNOLOGY   (Japan)

^b UNIVERSITY OF MICHIGAN   (United States)

Author keywords

180 bend; Heat transfer enhancement; Local heat transfer coefficient; Rib roughened channel; Turbulent flow

Indexed keywords

CHANNEL FLOW; FLOW INTERACTIONS; FLOW VISUALIZATION; HEAT TRANSFER COEFFICIENTS; SURFACE ROUGHNESS; TEMPERATURE DISTRIBUTION; THERMAL VARIABLES MEASUREMENT; TURBULENT FLOW; WALL FLOW;

RIB-ROUGHENED CHANNEL;

HEAT TRANSFER;

BEND; CHANNEL FLOW; FIN; HEAT TRANSFER; TURBULENT FLOW;

EID: 0032105357     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0017-9310(98)00308-1     Document Type: Article

References (25)

1. K.C.Cheng, M. Akiyama, Laminar forced convection heat transfer in curved rectangular channels, International Journal of Heat and Mass Transfer 13 (1970) 471-490.
2. D.E. Metzger, C.W. Plevich, C.S. Fan, Pressure loss through sharp 180 deg turns in smooth rectangular channels, Trans. ASME, Journal of Engineering for Gas Turbines and Power 106 (1984) 677-681.
3. J.A.C. Humphrey, H. lacovides, B.E. Launder, Some numerical experiments on developing laminar flow in circular-sectioned bends, J. Fluid Mech. 154 (1985) 357-375.
4. T. Kajishima, Y. Miyake, T. Inaba, Numerical simulation of laminar flow in curved ducts of a rectangular crosssection, Trans. JSME, B 54:(503) (1985) 1594-1601.
5. S. Sugiyama, M. Yamamoto, T. Hayashi, Flows in a curved rectangular channel (2nd report, velocity measurements in the developing region of laminar flow by using LDV), Trans. JSME,. B 53(487) (1987) 750-756.
6. K.C. Cheng, P.P. Yuen, Flow visualization studies on secondary flow patterns in straight tubes downstream of a 180-degree bend and in isothermally heated horizontal tubes, Trans. ASME, Journal of Heat Transfer 109 (1987) 49-54.
7. GJ. Hwang, C.H. Chao, Forced laminar convection in a curved isothermal square duct, Trans. ASME Journal of Heat Transfer 113 (1991) 48-55.
8. D.E. Metzger, C.S. Fan, C.W. Plevich, Effects of transverse rib roughness on heat transfer and pressure losses in rectangular ducts with sharp 180 degree turns, AIAA Paper No. 88-0166 (1988) 1-8.
9. J.H. Wagner, B.V. Johnson, R.A. Graziani, F.C. Yeh, Heat transfer in rotating serpentine passages with trips normal to the flow, Trans. ASME, Journal of Turbomachinery 114 (1992) 847-857.
10. B.V. Johnson, J.H. Wagner, G.D. Steuber, F.C. Yeh, Heat transfer in rotating serpentine passages with trips skewed to the flow, ASME Paper 92-GT-191 (1992).
11. P.R. Chandra, J.C. Han, S.C. Lau, Effect of rib angle on local heat/mass transfer distribution in a two-pass ribroughened channel, ASME Journal of Turbomachinery 110(1988)233-241.
12. J.C. Han, P.R. Chandra, S.C. Lau, Local heat/mass transfer distributions around sharp 180-deg turns in two-pass smooth and rib-roughened channels, Trans. ASME, Journal of Heat Transfer 110 (1988)91-98.
13. M.K. Chyu, Regional heat transfer in two-pass and threepass passages with 180-deg sharp turn, Trans. ASME, Journal of Heat Transfer 113 (1991) 63-70.
14. M. Hirota, H. Fujita, A. Tanaka, M. Taki, Characteristics of local heat (mass) transfer in rectangular ducts with a sharp 180-degree turn, 32nd National Heat Transfer Symposium of Japan 1 (1995) 39-40.
15. M. Hirota, H. Fujita, T. Yoshida, S. Araki, T. Tanaka, Characteristics of local heat (mass) transfer in rectangular ducts with a sharp 180-degree turn (influences of flow inlet condition), 33rd National Heat Transfer Symposium of Japan 3 (1996) 605-606.
16. M.K. Chyu, Regional heat transfer and pressure drop in two-pass and three-pass flow passages with 180-degree sharp turns, ASME Paper 89-GT-191 (1989) 1-8.
17. W.-J. Yang, N. Zhang, J. Chiou, Local heat transfer in a rotating serpentine flow passage, Trans. ASME, J. of Heat Transfer 114(1992)354-361.
18. S. Mochizuki, J. Takamura, S. Yamawaki, W.-J. Yang, Heat transfer in serpentine flow passage with rotation, Trans. ASME, J. of Turbomachinery 116 (1994) 133-140.
19. A. Murata, S. Mochizuki, M. Fukunaga, Detailed measurement of local heat transfer in a square-cross-section duct with a sharp 180-degree turn, in: Proceedings of the Tenth International Heat Transfer Conference, Brighton, U.K., 8-IC-19 (1994) 291-296.
20. S. Mochizuki, A. Murata, M. Fukunaga, Effect of rib arrangements on pressure drop and heat transfer in a ribroughened channel with a sharp 180-degree turn, Trans. ASME, J. of Turbomachinery 119 (1997) 610-616.
21. R.W. Johnson, Numerical simulation of local Nusselt number for turbulent flow in a square duct with a 180° bend, Numerical Heat Transfer 13 (1988) 205-228.
22. D.L. Besserman, S. Tanrikut, Comparison of heat transfer measurements with computations for turbulent flow around a 180-degree bend, Trans. ASME, Journal of Turbomachinery 114 (1992) 865-871.
23. T.S. Wang, M.K. Chyu, Heat convection in a 180-degree turning duct with different turn configurations, Journal of Thermophysics and Heat Transfer 8(3) (1994) 595-601.
24. W.M. Kays, M.E. Crawford, Convective Heat and Mass Transfer, 2nd ed., McGraw-Hill, 1980, p. 243.
25. JSME, Heat Transfer Data Book, JSME, 4th ed., 1986, p. 57.