High performance single-phase liquid coolers for power electronics

Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005

Volumn PART B, Issue , 2005, Pages 199-207

  Cheong, Brian C Y ^a   Ireland, Peter T ^a   Siebert, Annegret W ^b  

^a UNIVERSITY OF OXFORD   (United Kingdom)

^b ROLLS ROYCE PLC   (United Kingdom)

Author keywords

IGBT; Pressure drop and jet impingement; Thermal resistance

Indexed keywords

AIRCRAFT FUELS; COOLANTS; COOLING; GAS TURBINES; HEAT RESISTANCE; HYDRAULICS; MATHEMATICAL MODELS; PRESSURE DROP;

COOLING SYSTEM; HYDRAULIC PERFORMANCES; PRESSURE DROP AND JET IMPINGEMENT; THERMAL PERFORMANCES;

POWER ELECTRONICS;

EID: 27744490261     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/icmm2005-75027     Document Type: Conference Paper

References (24)

1. Jimenez, P.E. and Mudawar, I., 1994. A multi-kilowatt immersion-cooled standard electronic clamshell module for future aircraft avionics. J. Electronic Packaging, Vol. 116, 220-229.
2. Dyson, E., Hashemi, A. and Wong, H., 1996. High-power electronics heat rejection from aircraft skin. J. Enhanced Heat Transfer, Vol. 3, 165-176.
3. Hashemi, A., Dyson, E. and Nigen, J., 1999. Aircraft skin-cooling system for thermal management of onboard high-power electronics. J. Thermophysics & Heat Transfer, Vol. 13, 529-536.
4. Bar-Cohen, A. and Iyengar, M., 2002. Design and optimization of air-cooled heat sinks for sustainable development. IEEE Trans. Components & Packaging Tech., Vol. 25, 584-591.
5. Bar-Cohen, A. and Iyengar, M., 2003. Least-energy optimization of air-cooled heat sinks for sustainable development. IEEE Trans. Components & Packaging Tech., Vol. 26, 16-25.
6. Sarvar, F. and Whalley, D.C., 1999. Thermal design of high power semiconductor packages for aircraft systems. J. Electronics Manufacturing, Vol. 9, 269-274.
7. Kondo, Y., Matsushima, H. and Komatsu, T., 2000. Optimization of pin-fin heat sinks for impingement cooling of electronic packages. J. Electronic Packaging, Vol. 122, 240-246.
8. Lee, T., 2000. Design optimization of an integrated liquid-cooled IGBT power module using CFD technique. IEEE Trans. Components & Packaging Tech., Vol. 23, 55-60.
9. Bowers, M.B. and Mudawar, I., 1994. High heat flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks. Int. J. Heat Mass Transfer, Vol. 37, 321-332.
10. Mudawar, I., 2001. Assessment of high-heat-flux thermal schemes. IEEE Trans. Components & Packaging Tech., Vol. 24, 122-141.
11. Fusaro, J.M. and Rodriguez, P., 1997. Computational fluid dynamic and heat transfer analysis of an Al/SiC IGBT power hybrid package. Int. Symp. Advanced Packaging Materials, 169-172.
12. Lu, T.J., Evans, A.C. and Hutchinson, J.W., 1998. The effect of material properties on heat dissipation in high power electronics. J. Electronic Packaging, Vol. 120, 280-289.
13. He, J., Mehrotra, V. and Shaw, M.C., 1999. Thermal design and measurements of IGBT power modules: transient and steady state. IEEE IAS, Phoenix, Arizona, Oct., 1440-1444.
14. Evans, A.G., He, M.Y., Hutchinson, J.W. and Shaw, M., 2001. Temperature distribution in advanced power electronics systems and the effect of phase change materials on temperature suppression during power pulses. J. Electronic Packaging, Vol. 123, 211-210.
15. Gardon, R., and Cobonpue, J.C., 1962. Heat transfer between a flat plate and jets of air impinging on it. Int. Development in Heat Transfer, 2, 454-460.
16. Kercher, D.M. and Tabakoff, W., 1970. Heat transfer by a square array of air jets impinging perpendicular to a flat surface including the effect of spent air. ASME J. of Engineering for Power, 92, pp. 73-82.
17. Metzger, D.E. and Korstad, R.J., 1972. Effects of crossflow on impingement heat transfer. J. Eng. for Power, January, 35-41.
18. Obot, N.T. and Trabold, T.A., 1987. Impingement heat transfer within arrays of circular jets - Part I. Effects of minimum, intermediate, and complete crossflow for small and large spacings. J. Heat Transfer, Vol. (109), 872-879.
19. Lytle, D. and Webb, B. W., 1991. Secondary heat transfer maxima for air jet impingement at low nozzle-to-plate spacings. Exp. Heat Transfer, Fluid Mechanics and Thermodynamics 1991, 776-783, Elsevier, New York.
20. Mudawar, I. and Maddox, D.E., 1990. Enhancement of critical heat flux from high power microelectronic heat sources in a flow channel. J. Electronic Packaging, Vol. 112, 241-248.
21. Schafer, D., Incropera, F.P. and Ramadhyani, S., 1991. Planar liquid jet impingement cooling of multiple discrete heat sources. J. Electronic Packaging, Vol. 113, 359-366.
22. Heindel, T.J., Incropera, F.P. and Ramadhyani, S., 1992. Liquid immersion cooling of a longitudinal array of discrete heat sources in protruding substrates: I - single-phase convection. J. Electronic Packaging, Vol. 114, 55-62.
23. Heindel, T.J., Ramadhyani, S. and Incropera, F.P., 1992. Liquid immersion cooling of a longitudinal array of discrete heat sources in protruding substrates: II - forced convection boiling. J. Electronic Packaging, Vol. 114, 63-70.
24. Sun, H., Ma, C.F. and Nakayama, W., 1993. Local characteristics of convective heat transfer from simulated microelectronic chips to impinging submerged round water jets. J. Electronic Packaging, Vol. 115, 71-77.