메뉴 건너뛰기




Volumn 24, Issue 11-12, 2004, Pages 899-909

Error analysis and auto-calibration for a Cartesian-guided tripod machine tool

Author keywords

Auto calibration; Kinematic parameter; Nonlinear stiffness; Parallel kinematic machine; Volumetric error

Indexed keywords

CALIBRATION; COMPUTER SIMULATION; ERROR ANALYSIS; KINEMATICS; MATHEMATICAL MODELS; PARAMETER ESTIMATION;

EID: 10844265448     PISSN: 02683768     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00170-003-1800-1     Document Type: Review
Times cited : (13)

References (26)
  • 2
    • 0346348791 scopus 로고    scopus 로고
    • A Comparison of stiffness characteristics of serial and parallel machine tools
    • Tlusty J, Ziegert JC, Ridgeway S (2000) A Comparison of stiffness characteristics of serial and parallel machine tools. SME J Manuf Process 2(1):67-76
    • (2000) SME J Manuf Process , vol.2 , Issue.1 , pp. 67-76
    • Tlusty, J.1    Ziegert, J.C.2    Ridgeway, S.3
  • 3
    • 0033327659 scopus 로고    scopus 로고
    • Modal analysis and modeling of a parallel kinematic machine
    • Hardage DJ, Wiens GJ (1999) Modal analysis and modeling of a parallel kinematic machine. ASME Manuf Sci Eng 10:857-862
    • (1999) ASME Manuf Sci Eng , vol.10 , pp. 857-862
    • Hardage, D.J.1    Wiens, G.J.2
  • 4
    • 0001407001 scopus 로고    scopus 로고
    • Stiffness modeling of a stewart-platform-based milling machine
    • Clinton CM, Zhang G, Wavering AJ (1997) Stiffness modeling of a stewart-platform-based milling machine. Trans NAMRI/SME 25:335-340
    • (1997) Trans NAMRI/SME , vol.25 , pp. 335-340
    • Clinton, C.M.1    Zhang, G.2    Wavering, A.J.3
  • 6
    • 0141739407 scopus 로고    scopus 로고
    • Parallel kinematic machine positioning accuracy assessment and improvement
    • Song J, Mou JI (2000) Parallel kinematic machine positioning accuracy assessment and improvement. SME J Manuf Process 2(1):48-58
    • (2000) SME J Manuf Process , vol.2 , Issue.1 , pp. 48-58
    • Song, J.1    Mou, J.I.2
  • 7
    • 0031351276 scopus 로고    scopus 로고
    • Kinematic modeling and calibration of a Steward platform
    • Masory O, Wang J, Zhunag H (1997) Kinematic modeling and calibration of a Steward platform. Adv Robot 11(5):519-539
    • (1997) Adv Robot , vol.11 , Issue.5 , pp. 519-539
    • Masory, O.1    Wang, J.2    Zhunag, H.3
  • 8
    • 0033116390 scopus 로고    scopus 로고
    • Identification of placement parameters for modular platform manipulators
    • Ji Z, Li Z (1999) Identification of placement parameters for modular platform manipulators. J Robot Syst 16(3):227-236
    • (1999) J Robot Syst , vol.16 , Issue.3 , pp. 227-236
    • Ji, Z.1    Li, Z.2
  • 10
    • 0036588418 scopus 로고    scopus 로고
    • Error model and accuracy analysis of a six-DOF Stewart platform
    • Wang SM, Ehmann KF (2002) Error model and accuracy analysis of a six-DOF Stewart platform. ASME J Manuf Sci Eng 124:286-295
    • (2002) ASME J Manuf Sci Eng , vol.124 , pp. 286-295
    • Wang, S.M.1    Ehmann, K.F.2
  • 11
    • 0033099613 scopus 로고    scopus 로고
    • Determination of the actual configuration of the general Stewart platform using only one additional sensor
    • Parenti-Castelli V, Gregorio RD (1999) Determination of the actual configuration of the general Stewart platform using only one additional sensor. ASME J Mech Des 121(1):21-25
    • (1999) ASME J Mech Des , vol.121 , Issue.1 , pp. 21-25
    • Parenti-Castelli, V.1    Gregorio, R.D.2
  • 13
    • 0035269388 scopus 로고    scopus 로고
    • Self-calibration of three-legged modular reconfigurable parallel robots based on leg-end distance errors
    • Yang G, Chen IM, Lim WK, Yeo SH (2001) Self-calibration of three-legged modular reconfigurable parallel robots based on leg-end distance errors. Robotica 19:187-198
    • (2001) Robotica , vol.19 , pp. 187-198
    • Yang, G.1    Chen, I.M.2    Lim, W.K.3    Yeo, S.H.4
  • 14
    • 0035154655 scopus 로고    scopus 로고
    • Uncertainty propagation in calibration of parallel kinematic machines
    • Jokiel B, Ziegert JC, Bieg L (2001) Uncertainty propagation in calibration of parallel kinematic machines. Precis Eng 25:48-55
    • (2001) Precis Eng , vol.25 , pp. 48-55
    • Jokiel, B.1    Ziegert, J.C.2    Bieg, L.3
  • 19
    • 0032632092 scopus 로고    scopus 로고
    • Putting parallel kinematics machines (PKMs) to productive work
    • Rehsteiner F, Neugebauer R, Spiewak S, Wieland F (1999) Putting parallel kinematics machines (PKMs) to productive work. Ann CIRP 48(1):345-350
    • (1999) Ann CIRP , vol.48 , Issue.1 , pp. 345-350
    • Rehsteiner, F.1    Neugebauer, R.2    Spiewak, S.3    Wieland, F.4
  • 20
    • 0031169306 scopus 로고    scopus 로고
    • Self-calibration of parallel mechanisms with a case study on Stewart platform
    • Zhuang H (1997) Self-calibration of parallel mechanisms with a case study on Stewart platform. IEEE Trans Robot Automat 13(3):387-397
    • (1997) IEEE Trans Robot Automat , vol.13 , Issue.3 , pp. 387-397
    • Zhuang, H.1
  • 21
    • 10844241136 scopus 로고    scopus 로고
    • Autonomous calibration of Hexapod machine tools
    • Zhuang H, Liu L, Masory O (2000) Autonomous calibration of Hexapod machine tools. J Manuf Sci Eng 122:140-148
    • (2000) J Manuf Sci Eng , vol.122 , pp. 140-148
    • Zhuang, H.1    Liu, L.2    Masory, O.3
  • 22
    • 0033889297 scopus 로고    scopus 로고
    • Calibration of a Hexapod machine tool using a redundant leg
    • Patel AJ, Ehmann KF (2000) Calibration of a Hexapod machine tool using a redundant leg. Int J Mach Tools Manuf 40(3):489-512
    • (2000) Int J Mach Tools Manuf , vol.40 , Issue.3 , pp. 489-512
    • Patel, A.J.1    Ehmann, K.F.2
  • 23
    • 0033687332 scopus 로고    scopus 로고
    • Parallel kinematic machines (PKM)-limitations and new solutions
    • Pritschow G (2000) Parallel kinematic machines (PKM)-limitations and new solutions. Ann CIRP 49(1):275-280
    • (2000) Ann CIRP , vol.49 , Issue.1 , pp. 275-280
    • Pritschow, G.1
  • 24
    • 0026991034 scopus 로고
    • Advanced controllers for feed drive
    • Koren Y, Lo CC (1992) Advanced controllers for feed drive. Ann CIRP 41(1):689-697
    • (1992) Ann CIRP , vol.41 , Issue.1 , pp. 689-697
    • Koren, Y.1    Lo, C.C.2
  • 25
    • 0346093928 scopus 로고    scopus 로고
    • Design and analysis of a tripod machine tool with an integrated cartesian guiding and metrology mechanism
    • Chen J-S, Hsu W-Y (2004) Design and Analysis of a Tripod Machine Tool with an Integrated Cartesian Guiding and Metrology Mechanism. Precis Eng 28(1):46-57
    • (2004) Precis Eng , vol.28 , Issue.1 , pp. 46-57
    • Chen, J.-S.1    Hsu, W.-Y.2
  • 26
    • 84866079540 scopus 로고    scopus 로고
    • Multiaxis Machining PKMs and Traditional Machining Center
    • Fassi I, Wiens G (2000) Multiaxis Machining PKMs and Traditional Machining Center. SME Journal 28(1):46-57
    • (2000) SME Journal , vol.28 , Issue.1 , pp. 46-57
    • Fassi, I.1    Wiens, G.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.