Wear of Dental Resin Composites: Insights into Underlying Processes and Assessment Methods - A Review

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 65, Issue 2, 2003, Pages 280-285

  Turssi, Cecilia Pedroso ^a   De Moraes Purquerio, Benedito ^b   Serra, Mônica Campos ^b,c  

^a UNIVERSITY OF CAMPINAS   (Brazil)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

^c Department of Restorative Dentistry ^*  (Brazil)

Author keywords

Dental resin composites; Tribology; Wear; Wear measurement; Wear testing

Indexed keywords

DENTAL AMALGAMS; DENTAL COMPOSITES; RESINS; WEAR RESISTANCE;

AESTHETIC DEMANDS;

BIOMEDICAL ENGINEERING;

DENTAL ALLOY; RESIN;

ABRASION; ADHESION; COMPOSITE MATERIAL; CORROSION; DEGRADATION; DENTAL RESIN COMPOSITE; ESTHETICS; EVALUATION; FATIGUE; IN VITRO STUDY; IN VIVO STUDY; LUBRICATION; MATERIALS TESTING; MEASUREMENT; PHYSICAL PHENOMENA; REVIEW; SALIVA; TECHNIQUE; TOOTH FILLING; WEAR;

EID: 0347506024     PISSN: 00219304     EISSN: None     Source Type: Journal    
DOI: 10.1002/jbm.b.10563     Document Type: Review

References (83)

1. Browning WD, Dennison JB. A survey of failure modes in composite resin restorations. Oper Dent 1996;21:160-166.
2. Hickel R, Manhart J. Longevity of restorations in posterior teeth and reasons for failure. J Adhes Dent 2001;3:45-64.
3. Mair LH, Stolarski TA, Vowles RW, Lloyds CH. Wear: Mechanisms, manifestations and measurement. Report of a workshop. J Dent 1996;24:141-148.
4. Zum Gahr KH. Microstructure and wear of materials. New York: Elsevier; 1987.
5. Yap AUJ, Teoh SH, Hastings GW, Lu CS. Comparative wear ranking of dental restorative materials utilizing different wear simulation modes. J Oral Rehabil 1997;24:574-580.
6. Krecji I, Lutz F, Zedler C. Effect of contact area size on enamel and composite wear. J Dent Res 1992;71:1413-1416.
7. Lutz F, Krecji I, Barbakow F. Chewing pressure vs. wear of composites and opposing enamel cusps. J Dent Res 1992;71:1525-1529.
8. Yap AUJ, Chew CL, Teoh SH, Ong LFKL. Influence of contact stress on OCA wear of composite restoratives. Oper Dent 2001;26:134-144.
9. Pugh B. Wear. In: Friction and wear. London: Newnes-Butterworths; 1973. pp 141-172.
10. Ratanapridakul K, Leinfelder KF, Thomas J. Effect of finishing on the in vivo wear rate of a posterior composite resin. J Am Dent Assoc 1989;118:333-335.
11. Montes GGM, Draughn RA. In vitro surface degradation of composites by water and thermal cycling. Dent Mater 1986;2:193-197.
12. Moore DF. Wear and abrasion. In: Principles and applications of tribology. Oxford: Pergamon Press; 1975. pp 177-202.
13. Neale MJ. Tribology handbook. London: Butterworths; 1973.
14. Sulong MZ, Aziz RA. Wear of materials used in dentistry: A review of the literature. J Prosthet Dent 1990;63:342-349.
15. Mandel ID. The functions of saliva. J Dent Res 1987;66(Special Issue):623-627.
16. Söderholm KJ, Richards ND. Wear resistance of composites: A solved problem? Gen Dent 1998;46:256-263.
17. Zum Gahr KH. Wear by hard particles. Tribology Int 1998;31:587-596.
18. Draughn RA, Harrison A. Relationship between abrasive wear and microstructure of composite resins. J Prosthet Dent 1978;40:220-224.
19. Asmussen E. Clinical relevance of physical, chemical, and bonding properties of composite resins. Oper Dent 1985;10:61-73.
20. Mair LH. The measurement and analysis of clinical abrasion-A modified approach. Dent Mater 1990;6:271-275.
21. Lutz F, Phillips RW, Roulet JF, Setcos JC. In vivo and in vitro wear of potential posterior composites. J Dent Res 1984;63:914-920.
22. Bayne SC, Taylor DF, Heimann HO. Protection hypothesis for composite wear. Dent Mater 1992;8:305-309.
23. Venhoven BAM, de Gee AJ, Werner A, Davidson CL. Influence of filler parameters on the mechanical coherence of dental restorative resin composites. Biomaterials 1996;17:735-740.
24. Satou N, Khan AM, Satou K, Satou J, Shintani H, Wakasa K. In vitro and in vivo wear profile of composite resins. J Oral Rehabil 1992;19:31-37.
25. Suzuki S, Leinfelder KF, Kaway K, Tsuchitani Y. Effect of particle variation on wear rates of posterior composites. Am J Dent 1995;8:173-178.
26. Ferracane JL, Mitchem JC, Condon JR, Todd R. Wear and marginal breakdown of composites with various degrees of cure. J Dent Res 1997;76:1508-1516.
27. Hu X, Marquis PM, Shortall AC. Two-body in vitro study of some current dental composites and amalgams. J Prosthet Dent 1999;82:214-220.
28. Manhart J, Kunzelmann KH, Chen HY, Hickel R. Mechanical properties and wear behavior of light-cured packable composite resins. Dent Mater 2000;16:33-40.
29. Kaway K, Iwami Y, Ebisu S. Effect of resin monomer composition on toothbrush wear resistance. J Oral Rehabil 1998;25:264-268.
30. Mair L. Subsurface compression fatigue in seven dental composites. Dent Mater 1994;10:111-115.
31. Braem M, Lambrechts P, van Doren V, Vanherle G. In vivo evaluation of four posterior composites: Quantitative wear measurements and clinical behavior. Dent Mater 1986;2:106-113.
32. Asmussen E. Softening of BISGMA-based polymers by ethanol and by organic acids of plaque. Scand J Dent Res 1984;92:257-261.
33. Ferracane JL, Marker VA. Solvent degradation and reduced fracture toughness in aged composites. J Dent Res 1992;71:13-19.
34. Yap AUJ, Low JS, Ong LFKL. Effect of food-simulating liquids on surface characteristics of composite and polyacid-modified composite restoratives. Oper Dent 2000;25:170-176.
35. Roulet J, Wälti C. Influence of oral fluid on composite resin and glass-ionomer cement. J Prosthet Dent 1984;52:182-189.
36. van Groeningen G, Jongebloed W, Arends J. Composite degradation in vivo. Dent Mater 1986;2:225-227.
37. Turssi CP, Hara AT, Serra MC, Rodrigues AL Jr. Effect of storage media upon the surface micromorphology of resin-based restorative materials. J Oral Rehabil 2002;29:864-871.
38. Wu W, McKinney JE. Influence of chemicals on wear of dental composites. J Dent Res 1982;61:1180-1183.
39. de Gee AJ, Wendt SL, Werner A, Davidson CL. Influence of enzymes and plaque acids on in vitro wear of dental composites. Biomaterials 1996;17:1327-1332.
40. Aguirre A, Mendoza B, Levine MJ, Hatton MN, Douglas WH. In vitro characterization of human salivary lubrication. Arch Oral Biol 1989;34:675-677.
41. Hatton MN, Loomis RE, Levine MJ, Tabak LA. Masticatory lubrication: Role of carbohydrate in the lubricating property of a salivary glycoprotein-albumin complex. Biochem J 1985;230:817-820.
42. Hay DI, Bowen WH. The functions of salivary protein. In: Edgar WN, O'Mullane DM, editors. Saliva and oral health. London: British Dental Association; 1996. pp 105-122.
43. Nordbö H, Darwish S, Bhatnagar RS. Salivary viscosity and lubrication: Influence of pH and calcium. Scand J Dent Res 1984;92:306-314.
44. Peters MC, DeLong R, Pintado MR, Pallesen U, Qvist V, Douglas WH. Comparison of two measurement techniques for clinical wear. J Dent 1999;27:479-485.
45. Ryge G. Clinical criteria. Int Dent J 1980;30:347-358.
46. Kreulen CM, van Amerongen. Wear measurements in clinical studies of composite resin restorations in the posterior region: A review. J Dent Child 1991;2:109-123.
47. Mehl A, Gloger W, Kunzelmann K-H, Hickel R. A new optical 3-D device for the detection of wear. J Dent Res 1997;76:1799-1807.
48. Folwaczny M, Mehl A, Kunzelmann KH, Hickel R. Determination of changes on tooth-colored cervical restorations in vivo using a three-dimensional laser scanning device. Eur J Oral Sci 2000;108:233-238.
49. Leinfelder KF. Evaluation of clinical wear of posterior resins. In: Vanherle G, Smith DC, editors. Posterior composite resin dental restorative materials. The Netherlands: Peter Szulc; 1985. pp 501-509.
50. Lugassy AA, Moffa JP. Laboratory model for the quantification of clinical occlusal wear. J Dent Res 1985;64:181.
51. Goldberg AJ, Rydinge E, Santucci EA, Racz WB. Clinical evaluation methods for posterior composite restorations. J Dent Res 1984;63:1387-1391.
52. Bryant RW. Comparison of three standards for quantifying occlusal loss of composite restorations. Dent Mater 1990;6:60-62.
53. Taylor DF, Turnbull CD, Leinfelder KF. Comparative evaluation of casts for measurement of composite wear. J Dent Res 1984;63:293.
54. Perry R, Kugel G, Kunzelmann KH, Flessa HP, Estafan D. Composite restoration wear analysis: Conventional methods vs. three-dimensional laser digitizer. J Am Dent Assoc 2000;131:1472-1477.
55. Winkler MM, Lautenschlager EP, Boghosian A, Greener EH. Visual versus mechanical wear measurement of dental composite resin. J Oral Rehabil 1996;23:494-500.
56. Bangerter V, Christensen R, Christensen G. Method for determination of in vivo wear. J Dent Res 1987;66:126.
57. Roulet JF. Development of appropriate measuring devices. In: Degradation of dental polymers. Basel: Karger; 1987. p 220.
58. Lambrechts P, Vanherle G, Vuylsteke M, Davidson CL. Quantitative evaluation of the wear resistance of posterior dental restorations: A new three-dimensional measuring technique. J Dent 1984;12:252-267.
59. Wilson NHF, Norman RD. Five-year findings of a multicentre clinical trial for a posterior composite. J Dent 1991;19:153-159.
60. DeLong R, Douglas WH. Development of an artificial oral environment for the testing of dental restoratives: Bi-axial force and movement control. J Dent Res 1983;62:32-36.
61. Hu X, Harrington E, Marquis PM, Shortall AC. The influence of cyclic loading on the wear of a dental composite. Biomaterials 1999;20:907-912.
62. de Gee AJ, Pallav P, Davidson CL. Effects of abrasion medium on wear of stress-bearing composite and amalgam in vitro. J Dent Res 1986;65:654-658.
63. Finger W, Thiemann J. Correlation between in vitro and in vivo wear of posterior restorative materials. Dent Mater 1987;3:280-286.
64. Wassel RW, McCabe JF, Walls AWG. A two-body frictional wear test. J Dent Res 1994;73:1546-1553.
65. Kaway K, Leinfelder KF. In vitro evaluation of OCA wear resistance of posterior composites. Dent Mater 1995;11:246-251.
66. Condon JR, Ferracane JL. Evaluation of composite wear with a new multi-mode oral wear simulator. Dent Mater 1996;12:218-226.
67. Yap AUJ, Teoh SH, Tan KB. Influence of water exposure on three-body wear of composite restoratives. J Biomed Mater Res (Appl Biomater) 2000;53:547-553.
68. Schnabel C, Daes P, Kunzelmann KH, Hickel R. Two-body wear simulation in a computer controlled artificial mouth. J Dent Res 1994;74:294 (Abstr. 1540).
69. Pelka M, Elbert J, Schneider H, Kramer N, Petschelt A. Comparison of two- and three-body wear of glass-ionomers and composites. Eur J Oral Sci 1996;104:132-137.
70. Krecji I, Albert P, Lutz F. The influence of antagonist standardization on wear. J Dent Res 1999;78:713-719.
71. Burwell JT, Strang CD. On the empirical law of adhesive wear. J Appl Phys 1952;23:18-28.
72. Douglas WH. Considerations for modeling. Dent Mater 1996;12:203-207.
73. Gans RF, Watson GE, Tabak LA. A new assessment in vitro of human salivary lubrication using a compliant substrate. Arch Oral Biol 1990;35:487-492.
74. Kaidonis JA, Richards LC, Townsend GC, Tansley GD. Wear of human enamel: A quantitative in vitro assessment. J Dent Res 1998;77:1983-1990.
75. Cornell JA, Jordan JS, Ellis S, Rose EE. A method comparing the wear resistance of various materials used for artificial teeth. J Am Dent Assoc 1957;54:608-614.
76. Heath JR, Wilson HJ. Abrasion of restorative materials by toothpaste. J Oral Rehabil 1976;3:121-138.
77. Harrington E, Jones PA, Fisher SE, Wilson HJ. Toothbrush-dentifrice abrasion. Br Dent J 1982;153:135-138.
78. de Gee AJ, ten Harkel-Hagenaar HC, Davidson CL. Structural and physical factors affecting the brush wear of dental composites. J Dent 1985;13:60-70.
79. Momoi Y, Hirosaki K, Kohno A, McCabe JF. In vitro toothbrush-dentifrice abrasion of resin-modified glass ionomers. Dent Mater 1997;13:82-88.
80. Sarkar NK. Internal corrosion in dental composite wear: Its significance and simulation. J Biomed Mater Res (Appl Biomater) 2000;53:371-380.
81. Turssi CP, de Magalhães CS, Serra MC, Rodrigues AL Jr.. Surface roughness assessment of resin-based materials during brushing preceded by pH-cycling simulations. Oper Dent 2001;26:576-584.
82. Chadwick RG, McCabe JF, Walls AWG, Storer R. The effect of storage media upon the surface microhardness and abrasion resistance of three composites. Dent Mater 1990;6123-128.
83. Harrison A, Draughn RA. Abrasive wear, tensile strength, and hardness of dental composite resins-Is there a relationship? J Prosthet Dent 1976;36:395-398.