Past, present and future studies in elastohydrodynamics

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 213, Issue 5, 1999, Pages 317-333

  Dowson, D ^a   Ehret, P ^a  

^a UNIVERSITY OF LEEDS   (United Kingdom)

Author keywords

Elastohydrodynamics; Film shape and thickness; Impact and non steady state; Lubrication starvation; Numerical methods; Point and line contacts; Real surfaces and real fluids; Review; Rheological models; Roughness and micro EHL; Stresses and fatigue

Indexed keywords

ELASTOHYDRODYNAMIC LUBRICATION; MATHEMATICAL MODELING; RHEOLOGY;

EID: 0032714411     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/1350650991542703     Document Type: Review

References (146)

1. Dowson, D. and Higginson, G. R. A numerical solution to the elastohydrodynamic problem. J. Mech. EngngSci., 1959, 1(1), 6-15.
2. Barwell, F. T. The Founder of Modern Tribology (Eds D. M. McDowell and J. D. Jackson), 1970 (Manchester University Press).
3. Martin, H. M. Lubrication of gear teeth. Engineering, Land., 1916,102, 199.
4. Grubin, A. N. Fundamentals of the hydrodynamic theory of lubrication of heavily loaded cylindrical surfaces. In Investigation of the Contact of Machine Components, Central Scientific Research Institute for Technology and Mechanical Engineering (Moscow), Book 30, (DSIR Translation 337) (Ed. Kh. F. Ketova), 1949, pp. 115-166.
5. Petrusevich, A. I. Fundamental conclusions from the contact-hydrodynamic theory of lubrication. 7zv. Akad. Nauk. SSSR(OTN), 1951,2,209-223.
6. Moes, H. Communication. Symposium on Elastohydrodynamic Lubrication. Proc. Instn Mech. Engrs, 1966, 108(3B), 244-245.
7. Moes, H. and Bosnia, R. Film thickness and traction in EHL at point contact. In Proceedings of 1972 IMechE Symposium on Elastohydrodynamic Lubrication, 1972, pp. 149-152.
8. Greenwood, J. A. Presentation of elastohydrodynamic film thickness results. Instn Mech. EngngSci., 1969, 11(2), 128132.
9. Archard, J. F. Non-dimensional parameters in isothermal theories of elastohydrodynamic lubrication. Proc. Instn Mech. EngngSci., 1968,10(2), 165-167.
10. Theyse, F. H. Some aspects of the influence of hydrodynamic film formation on the contact between rolling/sliding surfaces. Wear, 1966,9,41-59.
11. Johnson, K. L. Regimes of elastohydrodynamic lubrication. J. Mech. EngngSci., 1970,12(1), 9-16.
12. Crook, A. W. The lubrication of rollers, II-film thickness with relation to viscosity and speed. Phil. Trans., 1961, A254, 223-236.
13. Sibley, L. B., Bell, J. C., Orcutt, F. K. and Alien, C. M. A study of the influence of lubricant properties on the performance of aircraft gas turbine engine rolling contact bearing. WADD Technical Report, 1960, pp. 60-189.
14. Dyson, A., Naylor, H. and Wilson, A. R. The measurement of oil-film thickness in elastohydrodynamic contacts. Proc. Instn Mech. Engrs, 1965-1966, Elastohydrodynamic Lubrication, 1966,180(3B), 119-134.
15. Kannel, J. W. Measurements of pressures in rolling contact. Proc. Instn Mech. Engrs, 1965-1966, Elastohydrodynamic Lubrication, 1966,180(3B), 135-142.
16. Dowson, D., Higginson, G. R. and Whitaker, A. V. Stress distribution in lubricated rolling contacts. In Proceedings of IMechE Symposium on Fatigue in Rolling Contact, paper 6.66, 1963, pp. 66-75.
17. Dawson, P. H. Effect of metallic contact on the pitting of lubricated rolling surface. Proc. Instn Mech. Engrs, Journal of Mechanical Engineering Science, 1962,4(1), 16-21.
18. Wellauer, E. J. AGMA experience in establishing coordinated gear rating standards. Invited paper presented to the Semi-International Symposium, Japan Society of Mechanical Engineers, 1967.
19. Taillan, T., Sibley, L. and Valori, R. Elastohydrodynamic film effects on the load-life behaviour of rolling contacts. Trans. ASME, J. Lubric. TechnoL, 1965, paper 65-LUB-l 1.
20. Johnson, K. L. Correlation of theory and experiment in research on fatigue in rolling contact. In Proceedings of IMechE Symposium on Fatigue in Rolling Contact, 1963, pp. 155-159.
21. Archard, J. F. and Cowking, E. W. Elastohydrodynamic lubrication at point contacts. Proc. Instn Mech. Engrs, 1966, 180,47-56.
22. Cameron, A. and Gohar, R. Theoretical and experimental studies of the oil in lubricated point contact. Proc. R. Soc. London, 1966, A291, 520-536.
23. Cheng, H. S. A numerical solution of the elastohydrodynamic film thickness in an elliptical contact. Trans. ASME F, J. Lubric. TechnoL, 1970,92(1), 155-162.
24. Ranger, A. P., Ettles, C. M. M. and Cameron, A. The solution of the point contact elastohydrodynamic problem. Proc. R. Soc., 1975, A346, 227-244.
25. Hamrock, B. J. and Dowson, D. Isothermal elastohydrodynamic lubrication of point contacts. Part I-theoretical formulation. Trans. ASME F, J. Tribology, 1976, 98(4), 223229.
26. Hamrock, B. J. and Dowson, D. Isothermal elastohydrodynamic lubrication of point contacts. Part II-ellipticity parameter results. Trans. ASME F, J. Tribology, 1976, 98(3), 375-383.
27. Hamrock, B. J. and Dowson, D. Isothermal elastohydrodynamic lubrication of point contacts. Part III-fully flooded results. Trans. ASME F, J. Tribology, 1977, 99(2), 264-276.
28. Hamrock, B. J. and Dowson, D. Isothermal elastohydrodynamic lubrication of point contacts. Part IV-starvation results. Trans. ASME F, J. Tribology, 1977, 99(1), 15-23.
29. Hamrock, B. J. and Dowson, D. Ball Bearing Lubrication. The Elastohydrodynamics of Elliptical Contacts, 1981 (John Wiley, New York).
30. Wolveridge, P. E, Baglin, K. P. and Archard, J. F. The starved lubrication of cylinders in line contact. Proc. Instn Mech. Engrs, 1971,185(1), 1159-1169.
31. Castle, P. and Dowson, D. A theoretical analysis of the starved elastohydrodynamic lubrication problem for cylinders in line contact. In Proceedings of 2nd IMechE Symposium on Elastohydrodynamic Lubrication, 1972, pp. 131-137.
32. Wedeven, L. D., Evans, D. and Cameron, A. Optical analysis of ball bearing starvation. Trans. ASME, J. Lubric. TechnoL, 1971,97,321-363.
33. Chevalier, F., Lubrecht, A. A., Cann, P. M. E., Colin, F. and Dalmaz, G. Film thickness in starved EHL point contact. Trans. ASME F,J. Tribology, 1998,120(1), 126-133.
34. Barus, C. Isotherms, isopiestics, and isometrics relative to viscosity. Am. J. Sci., 1893, 45, 87-96.
35. Roelands, C. Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils. PhD thesis, Delft University, Delft, 1996 (VRB Groningen, The Netherlands).
36. Yasutomi, S., Bair, S. and Winer, W. O. An application of a free volume model to lubricant theology I - dependence of viscosity on temperature and pressure. Trans. ASME F, J. Tribology, 1984,110, 32-37.
37. Johnson, K. L. and Tevaarwerk, J. L. Shear behaviour of elastohydrodynamic oil films. Proc. R. Soc. Land., 1977, A356(12), 215-236.
38. Bair, S. and Winer, W. O. A rheological model for elastohydrodynamic contacts based on primary laboratory data. Trans. ASME F, J. Lubric. Technol, 1979, 101, 258265.
39. Lee, R.-T. and Hamrock, B. J. A circular non-Newtonian model: Part I-used in elastohydrodynamic lubrication. Trans. ASME F, J. Tribology, 1990,112, 386-496.
40. Lee, R.-T. and Hamrock, B. J. A circular non-Newtonian model: Part II-used in microelastohydrodynamic lubrication. Trans. ASME F, J. Tribology, 1990,112, 497-505.
41. Bair, S. and Winer, W. O. Shear strength measurements of lubricant at high pressure. Trans. ASME F, J. Lubric. Technol., 1979,101,251-257.
42. Bair, S. and Winer, W. O. Some observations in high pressure rheology of lubricants. Trans. ASME F, J. Lubric. Technol., 1982,104, 357-364.
43. Höglund, E. and Jacobson, B. Experimental investigation of the shear strength of lubricant subjected to high pressure. Trans. ASME, J. Lubric. Technol., 1986,108, 571-578.
44. Clyens, S., Evans, C. R. and Johnson, K. L. Measurement of viscosity of supercooled liquids at high shear rates with a Hppkinson torsion bar. Proc. R. Soc. Land., 1985, A381, 195-214.
45. Ramesh, K. T. and Clifton, R. J. A Pressure shear plate experiment for studying the rheology of the lubricants at high pressures and high shearing rates. Trans. ASME F, J. Tribology, 1987,109,215-222.
46. Ramesh, K. T. On the rheology of a traction fluid. Trans. ASME F, J. Tribology, 1989, 111, 614-619.
47. Feng, R. and Ramesh, R. The rheology of lubricant at high shear rates. Trans. ASME F, J. Tribology, 1993, 115, 640649.
48. Jacobson, B. O. A high pressure-short time shear strength analyser for lubricants. Trans. ASME F, J. Tribology, 1985, 107,220-223.
49. Johnson, K. L. and Greenwood, J. A. Thermal analysis of an Eyrin fluid in elastohydrodynamic traction. Wear, 1980, 61,353-374.
50. Houpert, L. G., Flamand, L. and Berthe, D. Rheological and thermal effects in lubricated E.H.D. contacts. Trans. ASME F, J. Lubric. Technol., 1981,103, 527-532.
51. Tevaarwerk, J. L. and Johnson, K. L. The influence of fluid rheology on the performance of traction drives. Trans. ASME, J. Lubric. Technol., 1979,101, 266-274.
52. Tevaarwerk, J. L. and Johnson, K. L. Thermal influence on the traction behaviour of an elastic/plastic model. In Proceedings of 7th Leeds-Lyon Symposium on Tribology, 1980, pp. 201-213.
53. Chang, L., Cusano, C. and Conry, T. F. Effects of lubricant rheology and kinematic conditions on micro-elastohydrodynamic lubrication. Irans. ASME F, J. Tribology, 1989, 111, 344-351.
54. Kim, K. H. and Sadeghi, F. Non-Newtonian elastohydrody-namic lubrication of point contact. Trans. ASME F, J. Tribology, 1991,113.
55. Ehret, P., Dowson, D. and Taylor, C. M. On lubricant transport conditions in elastohydrodynamic conjunctions. Proc. R. Soc. Loud., 1998, A454(1971), 763-787.
56. Chittenden, R. J., Dowson, D., Dunn, J. and Taylor, C. M. A theroretical analysis of isothermal EHL concentrated contacts: Parts I and II. Proc. R. Soc. Land., 1985, A397(12), 245-294.
57. Mostofi, A. and Gohar, R. Oil film thickness and pressure distribution in elastohydrodynamic point contacts. J. Mech. EngngSci., 1982,24(4), 173-182.
58. Zhu, D. and Cheng, II. S. Effect of surface roughness on the point contact EHL. Traits. ASME F, J. Tribology, 1988, 110, 32-37.
59. Evans, H. P. and Snidle, R. ^V. Inverse solution of Reynolds equation of lubrication under point contact elastohydrodynamic conditions. Trans. ASME F, J. Lubric. Technol, 1981, 103(4), 539-546.
60. Evans, H. P. and Snidle, R. W. The elastohydrodynamic lubrication of point contacts at heavy loads. Proc. R. Soc., 1982, A382, 183-199.
61. Kweh, C. C., Evans, H. P. and Snidle, R. W. Elastohydrodynamic lubrication of heavily loaded circular contacts. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1989, 203(C2), 133-148.
62. Kweh, C. C., Evans, H. P. and Snidle, R. W. Microelastohydrodynamic lubrication of elliptical contact with transverse and three-dimensional roughness. Trans. ASME F, J. Tribology, 1989, 111, 577-584.
63. Okamura, II. A contribution to the numerical analysis of isothermal elastohydrodynamic lubrication. In Proceedings of 9th Leeds-Lyon Symposium on Tribology, 1982, pp. 313-320.
64. Brandt, A. Multi-level adaptive solutions to boundary-value problems. Mathematics of Computation, 1977, 31(138), 333-389.
65. Lubrecht, A. A., ten Napel, VV. E. and Bosma, R. Multigrid, an alternative method of solution for two-dimension elastohydrodynamically lubricated point contact calculations. Trans. ASMEF, J. Tribology, 1986,108(3), 551-556.
66. Lubrecht, A. A. Numerical solution of the EHL line and point contact problem using multigrid techniques. PhD thesis, Twente University, The Netherlands, 1987.
67. Venner, C. H. Multilevel solution of the EHL line and point contact problems. PhD thesis, Twente University, The Netherlands, 1991.
68. Brandt, A. and Lubrecht, A. A. Multilevel matrix multiplication and fast solution of integral equations. J. Comp. Phys., 1990,2, 348-370.
69. Venner, C. H. and Lubrecht, A. A. Numerical analysis of the influence of waviness on the film thickness of a circular EHL contact. Trans. ASME F, J. Tribology, 1996, 95TRIB-8.
70. Bowden, F. P. and Tabor, D. 77;e Friction and Lubrication of Solids, 1950 (Clarendon Press, Oxford).
71. Christensen, H. The oil film in a closing gap. Proc. R. Soc. Lond., 1962, A226, 312-328.
72. Dowson, D. and Joncs, D. A. Lubricant entrapment between approaching elastic solids. Nature, 1967, 214(5091), 947948.
73. Paul, G. R. and Cameron, A. A high pressure microvisco-meter based on refractive index. Proc. R. Soc. Loud., 1972, A331, 171-184.
74. Christcnsen, II. Elastohydrodynamic theory of spherical bodies in normal approach. Trans. ASME, J. Lubric. Technol, 1970,92,145-154.
75. Herrebrugh, K. Elastohydrodynamic squeeze films between two cylinders in normal approach. Trans. ASME F, J. Lubric. Technol., 1970, 92, 292-302.
76. Lee, K. M. and Cheng, H. S. The pressure and deformation profiles between two normally approaching lubricated cylinders. Trans. ASME, J. Lubric. Technol., 1973, 95(3), 308317.
77. Comvay, H. D. The rate of change of film thickness in the elastohydrodynamic squeeze film process. Trans. ASME, J. Lubric. Technol., 1973, 95, 391-393.
78. Conway, II. D. and Lee, H. C. Impact of lubricated surface by a sphere. Trans. ASME, J. Lubric. Technol., 1975, 97, 613-615.
79. Safa, M. M. A. and Gohar, R. Pressure distribution under a ball impacting a thin layer lubricant layer. Trans. ASME F, J. Lubric. Technol., 1986,108,372-376.
80. Dowson, D. and Wang, D. Impact elastohydrodynamics. Proceedings of 21st Leeds-Lyon Symposium, Leeds (Eds D. Dowson, C. M. Taylor et al.), 1995, pp. 565-582 (Eisevier).
81. Yang, P. and Wen, S. Pure squeeze action in an isothermal elastohydrodynamically lubricated spherical conjunction. Part I. Theory and dynamic load results. Wear, 1991, 142, 116.
82. Dowson, D. and Wang, D. An analysis of the normal bouncing of a solid elastic ball on an oily plate. Wear, 1994, 179, 29-37.
83. Larsson, R. and Höglund, E. Elastohydrodynamic lubrication at impact loading. Trans. ASME F, J. Tribology, 1994, 116,770-776.
84. Blok, H. and Koens, H. J. The breathing film thickness between a flexible seal and a reciprocating rod. Proc. Instn Afech. Engrs, Elastohydrodynamic Lubrication, 1966, 180(3B), 221-223.
85. Dowson, D. and Jin, Z.-W. An analysis of micro-elastohydrodynamic lubrication in synovial joints considering cyclic loading and entraining velocities. In Fluid Film Lubrication-Osborne Reynolds Centenary (1986), Proceedings of the 13th Leeds-Lyon Symposium on Tribology, 1987, pp. 375-386 (Elsevier, Amsterdam).
86. Jin, Z.-W., Dowson, D. and Fisher, J. Fluid film lubrication in natural hip joints. In Thin Films in Tribology (1992), Proceedings of the 19th Leeds-Lyon Symposium on Tribology, 1993, pp. 545-555 (Elsevier, Amsterdam).
87. Petrusevich, A. L, Kodnir, D. S., Salukvadze, D. L. and Schwarzman, V. The investigation of oil film thickness in lubricated ball-race rolling contact. Wear, 1972, 19, 369389.
88. Dowson, D., Ruddy, B. L. and Economou, P. N. The elastohydrodynamic lubrication of piston rings. Proc. R. Soc. Land., 1983, A386, 409-430.
89. Hooke, C. J. The minimum film thickness in line contacts during reversal entrainment. Trans. ASME F, J. Tribology, 1993,115,191-199.
90. Hooke, C. J. The minimum film thickness in lubricated line contacts during a reversal of entrainment-general solution and the development of a design chart. Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1994, 208(J1), 53-64.
91. Vichard, J. P. Transient effects in the lubrication of Hertzian contacts. Proc. Instn Mech. Engrs, Journal of Mechanical Engineering Science, 1971, 13(3), 173-189.
92. Wang, K. L. and Chcng, H. S. A numerical solution to the dynamic load, film thickness, and surface temperatures in spur gears. Part I-analysis. Trans. ASME, J. Mach. Des., 1981,103, 177-187.
93. Wang, K. L. and Cheng, H. S. A numerical solution to the dynamic load, film thickness, and surface temperatures in spur gears. Part II-results. Trans. ASME, J. Mach. Des., 1981,103,188-194.
94. Hua, D. Y., Zhang, H. H. and Zhan, S. L. Transient elastohydrodynamic lubrication of involute spur gear. In Proceedings of Japan International Tribology Conference, Nagoya, Japan, 1990, pp. 1641-1646.
95. Hua, D. Y. and Khonsari, M. M. Application of transient elastohydrodynamic lubrication analysis for gear transmissions. STLE, Tribology Trans., 1995,38(4), 905-913.
96. Larsson, R. and Höglund, E. Transient non-Newtonian elastohydrodynamic lubrication analysis of an involute spur gear. In Proceedings of 7th Nordic Symposium on Tribology, Nordtrib 96, Bergen, Norway, 1996.
97. Bedewi, M. A., Dowson, D. and Taylor, C. M. Elastohydrodynamic lubrication of line contacts subjected to time dependent loading with particular reference to roller bearings and cams and follower. In Mechanisms and Surface Distress, Proceedings of 12th Leeds-Lyon Symposium on Tribology, 1986, pp. 289-304 (Butterworths, London).
98. Lee, R.-T. and Hamrock, B. J. Squeeze and entraining motion in nonconformal line contacts, Part II. Trans. ASME F,J. Tribology, 1989, 111, 8-16.
99. Yang, P. and Wen, S. The behaviour of non-Newtonian thermal EHL films in line contacts at dynamic loads. Trans. ASME F, J. Tribology, 1992,114, 81-85.
100. Dowson, D., Harrison, P. and Taylor, C. M. The lubrication of automotive cams and followers. In Mechanisms and Surface Distress, Proceedings of llth Leeds-Lyon Symposium on Tribology, 1986, pp. 305-322 (Butterworths, London).
101. Dowson, D., Taylor, C. M. and Zhu, G. A transient elastohydrodynamic lubrication analysis of a cam and follower. J. Phys. D, Appl. Phys., Frontiers Tribology, 1992, 25(la),A313-A320.
102. Wijnant, Y. H. and Venner, C. H. Analysis of an EHL circular contact incorporating rolling element vibration. In Elastohydrodynamics '96, Fundamentals and Application in Lubrication and Traction, Proceedings of 23rd Leeds-Lyon Symposium, Leeds, 1996, pp. 445-456.
103. Höglund, E. and Larsson, R. Modelling non-steady EHL with focus on lubricant density. In Elastohydrodynamics '96, Fundamentals and Application in Lubrication and Traction, Proceedings of 23rd Leeds-Lyon Symposium, Leeds, 1997, pp. 511-521.
104. Cheng, H. S. and Dyson, A. Elastohydrodynamic lubrication of circumferentially-ground rough disks. ASLE Trans., 1978, 21,25.
105. Patir, N. and Cheng, II. S. Effect of surface orientation on the central film thickness in EHD contacts. In Proceedings of 5th Leeds-Lyon Symposium, Leeds (Eds D. Dowson, C. M. Taylor, M. Godet and D. Berthe), 1978, pp. 15-21.
106. Majumbar, B. C. and Hamrock, B. J, Effect of surface roughness on elastohydrodynamics line contact. Trans. ASME, J. Litbric. Technol., 1982, 104(3), 401-409.
107. Prakash, J. and Czichos, H. Influence of surface roughness and its orientation on partial elastohydrodynamic lubrication of rollers. Trans. ASME, J. Lubric. Technol., 1983,105, 591597.
108. Sadeghi, F. and Sui, P. C. Compressible elastohydrodynamic lubrication of rough surfaces. Trans. ASME F, J. Tribology, 1989,111,56.
109. Patir, N. and Cheng, H. S. An average model for determining effects of three dimensional roughness on partial hydrodynamic lubrication. Traits. ASME, J. Litbric. Technol., 1978,100, 12-17.
110. Goglia, P. R., Conry, T. F. and Cusano, C. The effect of surface irregularities on the elastohydrodynamic lubrication sliding Une contacts. Part I-single irregularities. Trans. ASME F, J. Lubric. Technol., 1981,106, 104-112.
111. Goglia, P. R., Conry, T. F. and Cusano, C. The effect of surface irregularities on the elastohydrodynamic lubrication sliding line contacts. Part II-wavy surfaces. Trans. ASME F, J. Lubric. Technol., 1981,106, 113-119.
112. Venner, C. H., Lubrecht, A. A. and ten Napel, W. E. Numerical simulation of the overolling of a surface feature in an EHL line contact. Trans. ASME F, J. Tribology, 1991, 113, 777-783.
113. Chang, L. and Webster, M. N. A study of elastohydrodynamic lubrication of rough surfaces. Trans. ASME F, J. Tribology, 1991,113, 110-115.
114. Chang, L., Webster, M. N. and Jackson, A. On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces. Trans. ASME F, J. Tribology, 1993,115,439-444.
115. Greenwood, J. A. and Morales-Espejel, G. E. The behaviour of transverse roughness in EHL contacts. Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1994, 208(J2), 121-132.
116. Morales-Espejel, G. E., Greenwood, J. and Melgar, J. L. Kinematics of roughness in EHL. In Proceedings of 22nd Leeds-Lyon Symposium on Tribology, 1996, pp. 501-513.
117. Hooke, C. J. Surface roughness modification in elastohydrodynamic line contacts operating in the elastic piezoviscous regime. Proc. Instn Mech. Engrs, Part J, Journal of Engineering Tribology, 1998, 212(J2), 145-162.
118. Venner, C. H., Couhier, F., Lubrecht, A. A. and Greenwood, J. A. Amplitude reduction of waviness in transient EHL contacts. In Elastohydrodynamics '96, Fundamentals and Application in Lubrication and Traction, Proceedings of 23rd Leeds-Lyon Symposium, Leeds, 1996.
119. Chang, L., Webster, M. N. and Jackson A. A line-contact micro-EHL model with 3D surface topography. Trans. ASME F, J. Tribology, 1994,116, 21-28.
120. Chang, L., Jackson, A. and Webster, M. N. Effects of 3-D surface topography on the EHL film thickness and film breakdown. Tribology Trans., 1994,37, 435-444.
121. Seabra, J. and Berthe, D. Elastohydrodynamic point contacts. Part 2: influence of surface speeds, surface waviness and load on the contact behaviour. Wear, 1989,130, 319-335.
122. Barrangan de Ling, Fdm., Evans, H. P. and Snidle, R. W. Micro-elastohydrodynamic lubrication of circumferentially finished rollers: the influence of temperature and roughness. Trans. ASMEF, J. Tribology, 1989, 111, 730-736.
123. Kweh, C. C., Patching, M. J., Evans, H. P. and Snidle, R. W. Simulation of elastohydrodynamic contacts between rough surfaces, Trans. ASME F, J. Tribology, 1991, 114, 412-426.
124. Lubrecht, A. A., ten Napel, W. E. and Bosma, R. The influence of longitudinal and transverse roughness on the elastohydrodynamic lubrication of circular contacts. Trans. ASME F, J. Tribology, 1988,110(3), 421-426.
125. Ai, X. and Cheng, H. S. The influence of moving dent on point EHL contact. STLE Tribology Trans., 1994, 37, 323335.
126. Venner, C. H. and Lubrecht, A. A. Numerical simulation of a transverse ridge in a circular EHL contact under rolling/ sliding. Trans. ASMEF, J. Tribology, 1994,116, 751-761.
127. Venner, C. H. and Lubrecht, A. A. Numerical simulation of waviness in a circular EHL contact, under rolling/sliding. In Lubricant and Lubrication, Proceedings of 21st Leeds-Lyon Symposium on Tribology, Leeds, 1994, pp. 259-272.
128. Ai, X. and Cheng, H. S. The effects of surface texture on EHL point contacts. Trans. ASMEF, J. Tribology, 1995, 118, 59-66.
129. Ehret, P., Dowson, D. and Taylor, C. M. Waviness orientation in EHL point contact. In Proceedings of 22nd Leeds-Lyon Symposium, Leeds (Eds D. Dowson, C. M. Taylor et al.), 1995.
130. Ehret, P., Dowson, D., Taylor, C. M. and Wang, D. Analysis of isothermal elastohydrodynamic point contacts lubricated by Newtonian fluids using multigrid methods. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1997, 211(C7), 493-508.
131. Kaneta, M., Sakai, T. and Nishikawa, H. Optical interferometric observations of the effects of a bump on point contact EHL. Trans. ASMEF, J. Tribology, 1992,114, 779-784.
132. Kaneta, M., Sakai, T. and Nishikawa, H. Effects of surface roughness on point contact EHL. STLE Tribology Trans., 1993,36(4), 605-612.
133. Dowson, D. The thinning film. J. Phys. D, Appl. Phys., Frontiers Tribology, 1992, 25, A334-A339.
134. Dowson, D. Current development in elastohydrodynamic lubrication. In Intelligent Motion-Control, Power-Transmission and Tribology, JSME Centennial Grand Congress, Tokyo, Japan, 1997, pp. 1-6.
135. Alsaad, M., Bair, S., Sanborn, D. M. and Winer, W. O. Glass transitions in lubricants: its relation to EHD lubrication. Trans. ASME F, J. Lubric. Technol., 1978, 100, 404417.
136. Georges, J.-M., Millot, S., Loubet, J. L., Tonck, A. and Mazuyer, D. Roughness and squeezed films at molecular level. In Thin Films in Tribology, Proceedings of 19th Leeds-Lyon Symposium on Tribology, 1993, pp. 443-452.
137. Bair, S., Qureshi, F. and Winer, W. O. Observations of shear localization in liquid lubricants under pressure. Trans.' ASMEF, J. Tribology, 1993,115, 507-514.
138. Israelachvili, J. M. Surface forces and macrorheology of molecularly thin liquid films. Handbook of Micro/Nanotribology (Ed. B. Bhushan), 1995, Ch. 8, pp. 267-319 (CRC Press, Boca Raton and London).
139. Spikes, H. A. Mixed lubrication-an overview. In Proceedings of Symposium on Tribology-Solving Friction and Wear Problems, Esslingen, 1996, pp. 1713-1735.
140. Georges, J.-M. Some surface science aspects of tribology. In Ne\v Directions in Tribology, First World Tribology Congress, London, September 1997, pp. 67-82.
141. Bair, S. and Winer, W. O. A rheological basis for concentrated contact friction. In Proceedings of 20th LeedsLyon Symposium on Tribology, 1994, pp. 37-44.
142. Mazuyer, D., Georges, J. M. and Cambou, B. Shear modulus of an amorphous film with bubble soap raft model. In Interface Dynamics, Proceedings of 14th Leeds-Lyon Symposium on Tribology, 1987, pp. 3-9.
143. Thompson, P. A. and Troian, S. M. A general boundary condition for liquid flow at solid surfaces. Nature, 1997,389, 360-362.
144. Kaneta, M., Nishikawa, H., Kameishi, K., Sakai, T. and Ohno, N. Effects of elastic moduli of contact surfaces in elastohydrodynamic lubrication. Trans. ASME F, J. Tribolog)>, 1992,114,75-80.
145. Kaneta, M. Necessity of reconstruction of EHL theory. Jap. J. Tribology, 1993,38, 860-868.
146. Kaneta, M., Nishikawa, H., Kanada, T. and Matsuda, K. Abnormal phenomena appearing in EHL contacts. Trans. ASMEF, J. Tribology, 1997,118, 886-982.