-
1
-
-
0033263063
-
Materials issues for optical components and photomasks in 157nm lithography
-
Liberman V, Bloomstein TM, Rothschild M, Sedlacek JHC, Uttaro RS, Bates AK, Peski CV, Orvek K (1999) Materials issues for optical components and photomasks in 157nm lithography. J Vac Sci Technol B 17:3273-3279
-
(1999)
J Vac Sci Technol B
, vol.17
, pp. 3273-3279
-
-
Liberman, V.1
Bloomstein, T.M.2
Rothschild, M.3
Sedlacek, J.H.C.4
Uttaro, R.S.5
Bates, A.K.6
Peski, C.V.7
Orvek, K.8
-
2
-
-
0031079290
-
Laser damage of alkaline-earth fluorides at 248 nm and the influence of polishing grades
-
Stenzel E, Gogoll S, Sils J, Huisinga M, Johansen H, Kastner G, Reichling M, Matthias E (1997) Laser damage of alkaline-earth fluorides at 248 nm and the influence of polishing grades. Appl Surf Sci 109-110:162-167
-
(1997)
Appl Surf Sci
, vol.109-110
, pp. 162-167
-
-
Stenzel, E.1
Gogoll, S.2
Sils, J.3
Huisinga, M.4
Johansen, H.5
Kastner, G.6
Reichling, M.7
Matthias, E.8
-
6
-
-
0026367694
-
Ultra-precision metal cutting - The past, the present and the future
-
Ikawa N, Donaldson RR, Komanduri R, Konig W, McKeown PA, Moriwaki T, Stowers IF (1991) Ultra-precision metal cutting - The past, the present and the future. Ann CIRP 40(2):587-594
-
(1991)
Ann CIRP
, vol.40
, Issue.2
, pp. 587-594
-
-
Ikawa, N.1
Donaldson, R.R.2
Komanduri, R.3
Konig, W.4
McKeown, P.A.5
Moriwaki, T.6
Stowers, I.F.7
-
7
-
-
0002237322
-
Single point diamond machining of glass
-
Puttick KE, Rudman MR, Smith KJ, Franks A, Lindsey K (1989) Single point diamond machining of glass. Proc Roy Soc A 426:19-30
-
(1989)
Proc Roy Soc A
, vol.426
, pp. 19-30
-
-
Puttick, K.E.1
Rudman, M.R.2
Smith, K.J.3
Franks, A.4
Lindsey, K.5
-
8
-
-
0025414837
-
Ductile regime machining of germanium and silicon
-
Blake PN, Scattergood RO (1990) Ductile regime machining of germanium and silicon. J Amer Ceram Soc 73(4):949-957
-
(1990)
J Amer Ceram Soc
, vol.73
, Issue.4
, pp. 949-957
-
-
Blake, P.N.1
Scattergood, R.O.2
-
9
-
-
0026142993
-
Ductile-regime machining model for diamond turning of brittle materials
-
Blackly WS, Scattergood RO (1991) Ductile-regime machining model for diamond turning of brittle materials. Free Eng 13(2):95-103
-
(1991)
Free Eng
, vol.13
, Issue.2
, pp. 95-103
-
-
Blackly, W.S.1
Scattergood, R.O.2
-
10
-
-
0001968603
-
Diamond turning of brittle materials for optical components
-
Nakasuji T, Kodera S, Hara S, Matsunaga H, Ikawa N, Shimada S (1990) Diamond turning of brittle materials for optical components. Ann CIRP 39(1):89-92
-
(1990)
Ann CIRP
, vol.39
, Issue.1
, pp. 89-92
-
-
Nakasuji, T.1
Kodera, S.2
Hara, S.3
Matsunaga, H.4
Ikawa, N.5
Shimada, S.6
-
11
-
-
0029193285
-
Assessment of the precision and cost effectiveness of direct machining "hybrid" type optical surface for IR applications
-
Shore P (1995) Assessment of the precision and cost effectiveness of direct machining "hybrid" type optical surface for IR applications. Proc SPIE 2576:426-431
-
(1995)
Proc SPIE
, vol.2576
, pp. 426-431
-
-
Shore, P.1
-
12
-
-
0030127076
-
Ductile-regime turning mechanism of single-crystal silicon
-
Shibata T, Fujii S, Makino E, Ikeda M (1996) Ductile-regime turning mechanism of single-crystal silicon. Prec Eng 18(2/3):130-137
-
(1996)
Prec Eng
, vol.18
, Issue.2-3
, pp. 130-137
-
-
Shibata, T.1
Fujii, S.2
Makino, E.3
Ikeda, M.4
-
13
-
-
0030151697
-
High resolution studies of crystalline damage induced by lapping and single-point diamond machining of Si (100)
-
Kunz RR, Clark HR, Nitishin PM, Rothschild M, Ahem BS (1996) High resolution studies of crystalline damage induced by lapping and single-point diamond machining of Si (100). J Mater Res 11(5):1228-1237
-
(1996)
J Mater Res
, vol.11
, Issue.5
, pp. 1228-1237
-
-
Kunz, R.R.1
Clark, H.R.2
Nitishin, P.M.3
Rothschild, M.4
Ahem, B.S.5
-
14
-
-
0031701882
-
Diamond turning of silicon substrates in ductile-regime
-
Leung TP, Lee WB, Lu XM (1998) Diamond turning of silicon substrates in ductile-regime. J Mater Proc Technol 73:42-48
-
(1998)
J Mater Proc Technol
, vol.73
, pp. 42-48
-
-
Leung, T.P.1
Lee, W.B.2
Lu, X.M.3
-
15
-
-
0035157059
-
On the ductile machining of silicon for micro electro-mechanical systems (MEMS), opto-electronic and optical applications
-
Yan J, Yoshino M, Kuriyagawa T, Shirakashi T, Syoji K, Komanduri R (2001) On the ductile machining of silicon for micro electro-mechanical systems (MEMS), opto-electronic and optical applications. Mater Sci Eng A 297(1-2):230-234
-
(2001)
Mater Sci Eng A
, vol.297
, Issue.1-2
, pp. 230-234
-
-
Yan, J.1
Yoshino, M.2
Kuriyagawa, T.3
Shirakashi, T.4
Syoji, K.5
Komanduri, R.6
-
18
-
-
0043221529
-
Effect of tool edge geometry on the nanometric cutting of Ge
-
Lucca DA, Chou P, Hocken RJ (1998) Effect of tool edge geometry on the nanometric cutting of Ge. Ann CIRP 47(1):475-478
-
(1998)
Ann CIRP
, vol.47
, Issue.1
, pp. 475-478
-
-
Lucca, D.A.1
Chou, P.2
Hocken, R.J.3
-
19
-
-
20844461085
-
Ductile-brittle transition under large negative rake angles
-
in Japanese
-
Yan J, Syoji K, Kuriyagawa T (2000) Ductile-brittle transition under large negative rake angles. J Japan Soc Prec Eng 66(7): 1130-1134, in Japanese
-
(2000)
J Japan Soc Prec Eng
, vol.66
, Issue.7
, pp. 1130-1134
-
-
Yan, J.1
Syoji, K.2
Kuriyagawa, T.3
-
20
-
-
85008025124
-
Analysis of cutting temperature in ultra-high precision diamond cutting of copper
-
in Japanese
-
Iwata K, Moriwaki T, Okuda K (1987) Analysis of cutting temperature in ultra-high precision diamond cutting of copper. J Japan Soc Prec Eng 53(8): 1253-1258, in Japanese
-
(1987)
J Japan Soc Prec Eng
, vol.53
, Issue.8
, pp. 1253-1258
-
-
Iwata, K.1
Moriwaki, T.2
Okuda, K.3
-
21
-
-
0031624236
-
The temperature of a single crystal diamond tool in turning
-
Ueda T, Sato M, Nakayama K (1998) The temperature of a single crystal diamond tool in turning. Ann CIRP 47(1):41-44
-
(1998)
Ann CIRP
, vol.47
, Issue.1
, pp. 41-44
-
-
Ueda, T.1
Sato, M.2
Nakayama, K.3
|