-
1
-
-
85072479655
-
Fatigue Strength and Residual Stress Analysis of Deep Rolled Crankshafts
-
Warrendale, PA, United States
-
Y.S. Ko, J.W. Park, H.O. Bhan, H. Park, and J.D. Lim, Fatigue Strength and Residual Stress Analysis of Deep Rolled Crankshafts, in Fatigue Strength and Residual Stress Analysis of Deep Rolled Crankshafts. SAE International400 Commonwealth Drive, Warrendale, PA, United States, 2005.
-
Fatigue Strength and Residual Stress Analysis of Deep Rolled Crankshafts. SAE International400 Commonwealth Drive
, pp. 2005
-
-
Ko, Y.S.1
Park, J.W.2
Bhan, H.O.3
Park, H.4
Lim, J.D.5
-
2
-
-
33644538234
-
Surface Processing to Improve the Fatigue Resistance of Advanced Bar Steels for Automotive Applications
-
D.K. Matlock, K.A. Alogab, M.D. Richards, and J.G. Speer, Surface Processing to Improve the Fatigue Resistance of Advanced Bar Steels for Automotive Applications, Mat. Res., 2005, 8(4), p 453–459. 10.1590/s1516-14392005000400017 DOI: 10.1590/s1516-14392005000400017
-
(2005)
Mat. Res.
, vol.8
, Issue.4
, pp. 453-459
-
-
Matlock, D.K.1
Alogab, K.A.2
Richards, M.D.3
Speer, J.G.4
-
3
-
-
85049969864
-
Current Challenges in MATERIAL choice for High-Performance Engine Crankshaft
-
P. Citti, A. Giorgetti, and U. Millefanti, Current Challenges in MATERIAL choice for High-Performance Engine Crankshaft, Proc. Struct. Integ., 2018, 8, p 486–500. 10.1016/j.prostr.2017.12.048 DOI: 10.1016/j.prostr.2017.12.048
-
(2018)
Proc. Struct. Integ.
, vol.8
, pp. 486-500
-
-
Citti, P.1
Giorgetti, A.2
Millefanti, U.3
-
4
-
-
84922340645
-
Measurement and Correction of Residual Stress Gradients in Aeronautical Gears After Various Induction Surface Hardening Treatments
-
V. Savaria, H. Monajati, F. Bridier, and P. Bocher, Measurement and Correction of Residual Stress Gradients in Aeronautical Gears After Various Induction Surface Hardening Treatments, J. Mater. Process. Technol., 2015, 220, p 113–123. 10.1016/j.jmatprotec.2014.12.009 DOI: 10.1016/j.jmatprotec.2014.12.009
-
(2015)
J. Mater. Process. Technol.
, vol.220
, pp. 113-123
-
-
Savaria, V.1
Monajati, H.2
Bridier, F.3
Bocher, P.4
-
5
-
-
85047054449
-
Crankshaft Fillet Hardening: Challenges and Prospects
-
F. Garcia, Crankshaft Fillet Hardening: Challenges and Prospects, Industrial Heating, 2014, 12, p 47–48
-
(2014)
Industrial Heating
, vol.12
, pp. 47-48
-
-
Garcia, F.1
-
6
-
-
43549095002
-
Residual Stresses in Surface Induction Hardening of Steels: Comparison Between Experiment and Simulation
-
D. Coupard, T. Palin-luc, P. Bristiel, V. Ji, and C. Dumas, Residual Stresses in Surface Induction Hardening of Steels: Comparison Between Experiment and Simulation, Mater. Sci. Eng., A, 2008, 487(1-2), p 328–339. 10.1016/j.msea.2007.10.047 DOI: 10.1016/j.msea.2007.10.047
-
(2008)
Mater. Sci. Eng., A
, vol.487
, Issue.1-2
, pp. 328-339
-
-
Coupard, D.1
Palin-luc, T.2
Bristiel, P.3
Ji, V.4
Dumas, C.5
-
7
-
-
84969964571
-
State of the art of Deep Rolling
-
P. Delgado, I.I. Cuesta, J.M. Alegre, and A. Díaz, State of the art of Deep Rolling, Precis. Eng., 2016, 46, p 1–10. 10.1016/j.precisioneng.2016.05.001 DOI: 10.1016/j.precisioneng.2016.05.001
-
(2016)
Precis. Eng.
, vol.46
, pp. 1-10
-
-
Delgado, P.1
Cuesta, I.I.2
Alegre, J.M.3
Díaz, A.4
-
9
-
-
85047097064
-
Local Fatigue Strength Assessment of Induction Hardened Components Based on Numerical Manufacturing Process Simulation
-
M. Leitner, R. Aigner, and D. Dobberke, Local Fatigue Strength Assessment of Induction Hardened Components Based on Numerical Manufacturing Process Simulation, Proc. Eng., 2018, 213, p 644–650. 10.1016/j.proeng.2018.02.060 DOI: 10.1016/j.proeng.2018.02.060
-
(2018)
Proc. Eng.
, vol.213
, pp. 644-650
-
-
Leitner, M.1
Aigner, R.2
Dobberke, D.3
-
11
-
-
0035546438
-
Influence of Process Parameters for Induction Hardening on Residual Stresses
-
H. Kristoffersen and P. Vomacka, Influence of Process Parameters for Induction Hardening on Residual Stresses, Mater. Des., 2001, 22(8), p 637–644. 10.1016/s0261-3069(01)00033-4 DOI: 10.1016/s0261-3069(01)00033-4
-
(2001)
Mater. Des.
, vol.22
, Issue.8
, pp. 637-644
-
-
Kristoffersen, H.1
Vomacka, P.2
-
12
-
-
0036467811
-
Fatigue Lives for Induction Hardened Shafts with Subsurface Crack Initiation
-
A. Tjernberg, Fatigue Lives for Induction Hardened Shafts with Subsurface Crack Initiation, Eng. Fail. Anal., 2002, 9(1), p 45–61. 10.1016/s1350-6307(00)00036-4 DOI: 10.1016/s1350-6307(00)00036-4
-
(2002)
Eng. Fail. Anal.
, vol.9
, Issue.1
, pp. 45-61
-
-
Tjernberg, A.1
-
13
-
-
85086177956
-
Technologische Eigenschaften von AFP-Stahl im Temperaturbereich zwischen Raumtemperatur und 500°C
-
E. Hajyheydari, M. Liewald, and A. Felde. Technologische Eigenschaften von AFP-Stahl im Temperaturbereich zwischen Raumtemperatur und 500°C. SchmiedeJOURNAL, 2012, p. 54–57.
-
(2012)
Schmiedejournal
, pp. 54-57
-
-
Hajyheydari, E.1
Liewald, M.2
Felde, A.3
-
14
-
-
85087095562
-
Entstehung in Metallen, Hochpolymeren u. Silikatischen Werkstoffen, Messtechnik u
-
Aufl. Deutscher Verlag für Grundstoffindustrie, Leipzig
-
H.-D. Tietz, Grundlagen der Eigenspannungen: Entstehung in Metallen, Hochpolymeren u. silikatischen Werkstoffen, Messtechnik u. Bewertung. 1. Aufl. Deutscher Verlag für Grundstoffindustrie, Leipzig 1983.
-
(1983)
Bewertung
, vol.1
-
-
Tietz, H.-D.1
Eigenspannungen, G.2
-
15
-
-
0031508128
-
Messung von Festwalzeigenspannungsverteilungen an Bauteilen
-
C. Achmus, J. Betzold, and H. Wohlfahrt, Messung von Festwalzeigenspannungsverteilungen an Bauteilen, Mat.-wiss. u. Werkstofftech., 1997, 28(4), p 153–157. 10.1002/mawe.19970280405 DOI: 10.1002/mawe.19970280405
-
(1997)
Mat.-wiss. u. Werkstofftech.
, vol.28
, Issue.4
, pp. 153-157
-
-
Achmus, C.1
Betzold, J.2
Wohlfahrt, H.3
-
16
-
-
34248229244
-
Eigenspannungen als Messgröße zur Qualitätssicherung
-
J. Betzold, J. Pucelik, and S. Eisenberg, Eigenspannungen als Messgröße zur Qualitätssicherung, Mat.-wiss. u. Werkstofftech., 2007, 38(4), p 263–273. 10.1002/mawe.200700133 DOI: 10.1002/mawe.200700133
-
(2007)
Mat.-wiss. u. Werkstofftech.
, vol.38
, Issue.4
, pp. 263-273
-
-
Betzold, J.1
Pucelik, J.2
Eisenberg, S.3
-
18
-
-
0001470172
-
2-Ψ Verfahren der röntgenographischen Spannungsmessung
-
COI: 1:CAS:528:DyaF3MXhsVWht7c%3D
-
2-Ψ Verfahren der röntgenographischen Spannungsmessung, Zeitschrift für angewandte Physik, 1961, 13, p 305–316
-
(1961)
Zeitschrift für angewandte Physik
, vol.13
, pp. 305-316
-
-
Macherauch, E.1
Müller, P.2
-
19
-
-
84867401814
-
Computational Quantification and Correction of the Errors Induced by Layer Removal for Subsurface Residual Stress Measurements
-
V. Savaria, F. Bridier, and P. Bocher, Computational Quantification and Correction of the Errors Induced by Layer Removal for Subsurface Residual Stress Measurements, Int. J. Mech. Sci., 2012, 64(1), p 184–195. 10.1016/j.ijmecsci.2012.07.003 DOI: 10.1016/j.ijmecsci.2012.07.003
-
(2012)
Int. J. Mech. Sci.
, vol.64
, Issue.1
, pp. 184-195
-
-
Savaria, V.1
Bridier, F.2
Bocher, P.3
-
21
-
-
84879462007
-
-
Springer, Boston, MA
-
A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field, Electron Backscatter Diffraction in Materials Science, Springer, Boston, MA, 2009 DOI: 10.1007/978-0-387-88136-2
-
(2009)
Electron Backscatter Diffraction in Materials Science
-
-
Schwartz, A.J.1
Kumar, M.2
Adams, B.L.3
Field, D.P.4
-
22
-
-
84939129904
-
Assessment of Geometrically Necessary Dislocation Levels Derived by 3D EBSD
-
P.J. Konijnenberg, S. Zaefferer, and D. Raabe, Assessment of Geometrically Necessary Dislocation Levels Derived by 3D EBSD, Acta Mater., 2015, 99, p 402–414. 10.1016/j.actamat.2015.06.051 DOI: 10.1016/j.actamat.2015.06.051
-
(2015)
Acta Mater.
, vol.99
, pp. 402-414
-
-
Konijnenberg, P.J.1
Zaefferer, S.2
Raabe, D.3
-
23
-
-
84964008543
-
A Comparison of EBSD Based Strain Indicators for the Study of Fe-3Si Steel Subjected to Cyclic Loading
-
C. Schayes, J. Bouquerel, J.-B. Vogt, F. Palleschi, and S. Zaefferer, A Comparison of EBSD Based Strain Indicators for the Study of Fe-3Si Steel Subjected to Cyclic Loading, Mater. Charact., 2016, 115, p 61–70. 10.1016/j.matchar.2016.03.020 DOI: 10.1016/j.matchar.2016.03.020
-
(2016)
Mater. Charact.
, vol.115
, pp. 61-70
-
-
Schayes, C.1
Bouquerel, J.2
Vogt, J.-B.3
Palleschi, F.4
Zaefferer, S.5
-
24
-
-
84900976783
-
Theory and Application of Electron Channelling Contrast Imaging Under Controlled Diffraction Conditions
-
S. Zaefferer and N.-N. Elhami, Theory and Application of Electron Channelling Contrast Imaging Under Controlled Diffraction Conditions, Acta Mater., 2014, 75, p 20–50. 10.1016/j.actamat.2014.04.018 DOI: 10.1016/j.actamat.2014.04.018
-
(2014)
Acta Mater.
, vol.75
, pp. 20-50
-
-
Zaefferer, S.1
Elhami, N.-N.2
-
25
-
-
79551691605
-
Observation of Stacking Faults in a Scanning Electron Microscope by Electron Channelling Contrast Imaging
-
A. Weidner, A. Glage, L. Sperling, and H. Biermann, Observation of Stacking Faults in a Scanning Electron Microscope by Electron Channelling Contrast Imaging, IJMR, 2011, 102(1), p 3–5. 10.3139/146.110448 DOI: 10.3139/146.110448
-
(2011)
IJMR
, vol.102
, Issue.1
, pp. 3-5
-
-
Weidner, A.1
Glage, A.2
Sperling, L.3
Biermann, H.4
-
26
-
-
84893442311
-
ECCI Observations of Dislocation Structures Around Fatigue Cracks in Ferritic Stainless Steel Single Crystals
-
T. Taniguchi, Y. Kaneko, and S. Hashimoto, ECCI, Observations of Dislocation Structures Around Fatigue Cracks in Ferritic Stainless Steel Single Crystals, IOP Conf. Ser. Mater. Sci. Eng, 2009, 3, p 12020. 10.1088/1757-899x/3/1/012020 DOI: 10.1088/1757-899x/3/1/012020
-
(2009)
IOP Conf. Ser. Mater. Sci. Eng
, vol.3
, pp. 12020
-
-
Taniguchi, T.1
Kaneko, Y.2
Hashimoto, S.3
-
27
-
-
84875920236
-
-
Verl. Europa-Lehrmittel, Haan-Gruiten
-
V. Läpple, Wärmebehandlung des Stahls: Grundlagen, Verfahren und Werkstoffe 9., aktualisierte Aufl, Verl. Europa-Lehrmittel, Haan-Gruiten, 2006
-
(2006)
Wärmebehandlung des Stahls: Grundlagen, Verfahren und Werkstoffe 9., aktualisierte Aufl
-
-
Läpple, V.1
-
29
-
-
84936142433
-
-
(eds), Berlin, Heidelberg, Springer Vieweg
-
F.-W. Bach and K. Kerber, Ed., Prozesskette Präzisionsschmieden, Berlin, Heidelberg, Springer Vieweg, 2014
-
(2014)
Prozesskette Präzisionsschmieden
-
-
Bach, F.-W.1
Kerber, K.2
-
30
-
-
0003679053
-
Scholtes. Eigenspannungen in mechanisch randschichtverformten Werkstoffzuständen - Ursachen, Ermittlung und Bewertung. DGM Informationsgesellschaft mbH, Oberursel 1991, 367 Seiten, zahlreiche Abb. u. Tabellen
-
K.H. Kloos and B. Scholtes, Scholtes. Eigenspannungen in mechanisch randschichtverformten Werkstoffzuständen - Ursachen, Ermittlung und Bewertung. DGM Informationsgesellschaft mbH, Oberursel 1991, 367 Seiten, zahlreiche Abb. u. Tabellen, Mat.-wiss. u. Werkstofftech, 1991, 22(12), p 444. 10.1002/mawe.19910221203 DOI: 10.1002/mawe.19910221203
-
(1991)
Mat.-wiss. u. Werkstofftech
, vol.22
, Issue.12
, pp. 444
-
-
Kloos, K.H.1
Scholtes, B.2
-
31
-
-
0015662177
-
Zur zweckmäßigen Definition von Eigenspannungen
-
COI: 1:CAS:528:DyaE2cXmt1Cguw%3D%3D
-
E. Macherauch, H. Wohlfahrt, and U. Wolfstieg, Zur zweckmäßigen Definition von Eigenspannungen, HTM, 1973, 28(3), p 201–211
-
(1973)
HTM
, vol.28
, Issue.3
, pp. 201-211
-
-
Macherauch, E.1
Wohlfahrt, H.2
Wolfstieg, U.3
-
33
-
-
3543110931
-
Line Broadening Analysis Using Integral Breadth Methods: A Critical Review
-
P. Scardi, M. Leoni, and R. Delhez, Line Broadening Analysis Using Integral Breadth Methods: A Critical Review, J. Appl. Crystallogr., 2004, 37(3), p 381–390. 10.1107/s0021889804004583 DOI: 10.1107/s0021889804004583
-
(2004)
J. Appl. Crystallogr.
, vol.37
, Issue.3
, pp. 381-390
-
-
Scardi, P.1
Leoni, M.2
Delhez, R.3
-
34
-
-
85006784366
-
EBSD and Electron Channeling Study of Anomalous Slip in Oligocrystals of High Chromium Ferritic Stainless Steel
-
Z.-W. Hsiao, T.-Y. Wu, D. Chen, J.-C. Kuo, and D.-Y. Lin, EBSD and Electron Channeling Study of Anomalous Slip in Oligocrystals of High Chromium Ferritic Stainless Steel, Micron, 2017, 94, p 15–25. 10.1016/j.micron.2016.12.003 DOI: 10.1016/j.micron.2016.12.003
-
(2017)
Micron
, vol.94
, pp. 15-25
-
-
Hsiao, Z.-W.1
Wu, T.-Y.2
Chen, D.3
Kuo, J.-C.4
Lin, D.-Y.5
-
35
-
-
85008517768
-
Effect of Prior Deformation on Microstructural Development and Laves Phase Precipitation in High-Chromium Stainless Steel
-
Z.-W. Hsiao, D. Chen, J.-C. Kuo, and D.-Y. Lin, Effect of Prior Deformation on Microstructural Development and Laves Phase Precipitation in High-Chromium Stainless Steel, J. Microsc., 2017, 266(1), p 35–47. 10.1111/jmi.12516 DOI: 10.1111/jmi.12516
-
(2017)
J. Microsc.
, vol.266
, Issue.1
, pp. 35-47
-
-
Hsiao, Z.-W.1
Chen, D.2
Kuo, J.-C.3
Lin, D.-Y.4
-
36
-
-
0014731854
-
The Deformation of Plastically Non-homogeneous Materials
-
M.F. Ashby, The Deformation of Plastically Non-homogeneous Materials, Philos. Mag.: J. Theor. Exp. Appl. Phys., 2006, 21(170), p 399–424. 10.1080/14786437008238426 DOI: 10.1080/14786437008238426
-
(2006)
Philos. Mag.: J. Theor. Exp. Appl. Phys.
, vol.21
, Issue.170
, pp. 399-424
-
-
Ashby, M.F.1
-
37
-
-
84885593940
-
Evolution of DISLOCATION Density Distributions in Copper During Tensile Deformation
-
J. Jiang, T.B. Britton, and A.J. Wilkinson, Evolution of DISLOCATION Density Distributions in Copper During Tensile Deformation, Acta Mater., 2013, 61(19), p 7227–7239. 10.1016/j.actamat.2013.08.027 DOI: 10.1016/j.actamat.2013.08.027
-
(2013)
Acta Mater.
, vol.61
, Issue.19
, pp. 7227-7239
-
-
Jiang, J.1
Britton, T.B.2
Wilkinson, A.J.3
-
39
-
-
79958785682
-
A Review of Strain Analysis Using Electron Backscatter Diffraction
-
S.I. Wright, M.M. Nowell, and D.P. Field, A Review of Strain Analysis Using Electron Backscatter Diffraction, Microsc. Microanal., 2011, 17(3), p 316–329. 10.1017/s1431927611000055 DOI: 10.1017/s1431927611000055
-
(2011)
Microsc. Microanal.
, vol.17
, Issue.3
, pp. 316-329
-
-
Wright, S.I.1
Nowell, M.M.2
Field, D.P.3
-
40
-
-
85087095998
-
-
aktualisierte Auflage. Expert verlag, Renningen
-
D. Liedtke, M. Hoferer, K.H. Illgner, N. Pirzl, and H. Stiele, Wärmebehandlung von Eisenwerkstoffen. 10., aktualisierte Auflage. Expert verlag, Renningen, 2017.
-
(2017)
Wärmebehandlung Von Eisenwerkstoffen
, vol.10
-
-
Liedtke, D.1
Hoferer, M.2
Illgner, K.H.3
Pirzl, N.4
Stiele, H.5
-
42
-
-
85087096532
-
-
Werkstoffkunde: Strukturen, Eigenschaften, Prüfung. 17., überarb. und aktualisierte Aufl. Vieweg + Teubner, Wiesbaden
-
W. Weißbach, Werkstoffkunde: Strukturen, Eigenschaften, Prüfung. 17., überarb. und aktualisierte Aufl. Vieweg + Teubner, Wiesbaden, 2010.
-
(2010)
-
-
Weißbach, W.1
|