메뉴 건너뛰기




Volumn 46, Issue , 2016, Pages 1-10

State of the art of Deep Rolling

Author keywords

Deep Rolling; Fatigue life; Surface treatments

Indexed keywords

HARDENING; RESIDUAL STRESSES; SHOT PEENING; STRAIN HARDENING; SURFACE ROUGHNESS; SURFACE TREATMENT;

EID: 84969964571     PISSN: 01416359     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.precisioneng.2016.05.001     Document Type: Review
Times cited : (92)

References (78)
  • 1
  • 2
    • 84901810348 scopus 로고    scopus 로고
    • The influence of deep rolling on the surface integrity of AISI 1060 high carbon steel
    • Abrão, A.M., Denkena, B., Köhler, J., Breidenstein, B., Mörke, T., The influence of deep rolling on the surface integrity of AISI 1060 high carbon steel. Procedia CIRP 13 (2014), 31–36.
    • (2014) Procedia CIRP , vol.13 , pp. 31-36
    • Abrão, A.M.1    Denkena, B.2    Köhler, J.3    Breidenstein, B.4    Mörke, T.5
  • 3
    • 84937966582 scopus 로고    scopus 로고
    • The inducement of residual stress through deep rolling of AISI 1060 steel and its subsequent relaxation under cyclic loading
    • Abrao, A.M., Denkena, B., Koehler, J., Breidenstein, B., Moerke, T., The inducement of residual stress through deep rolling of AISI 1060 steel and its subsequent relaxation under cyclic loading. Int. J. Adv. Manuf. Technol. 79 (2015), 1939–1947.
    • (2015) Int. J. Adv. Manuf. Technol. , vol.79 , pp. 1939-1947
    • Abrao, A.M.1    Denkena, B.2    Koehler, J.3    Breidenstein, B.4    Moerke, T.5
  • 4
    • 0031508128 scopus 로고    scopus 로고
    • Measurement of deep-rolling residual stress-distributions on components
    • Achmus, C., Betzold, J., Wohlfahrt, H., Measurement of deep-rolling residual stress-distributions on components. Materialwiss. Werkstofftech. 28 (1997), 153–157.
    • (1997) Materialwiss. Werkstofftech. , vol.28 , pp. 153-157
    • Achmus, C.1    Betzold, J.2    Wohlfahrt, H.3
  • 5
    • 0032634753 scopus 로고    scopus 로고
    • Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304
    • Altenberger, I., Scholtes, B., Martin, U., Oettel, H., Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304. Mater. Sci. Eng.: A 264 (1999), 1–16.
    • (1999) Mater. Sci. Eng.: A , vol.264 , pp. 1-16
    • Altenberger, I.1    Scholtes, B.2    Martin, U.3    Oettel, H.4
  • 6
    • 13444276224 scopus 로고    scopus 로고
    • Effects of mechanical surface treatment on fatigue failure in Ti-6Al-4V: role of residual stresses and foreign-object damage
    • Altenberger, I., Noster, U., Boyce, B.L., Peters, J.O., Scholtes, B., Ritchie, R.O., Effects of mechanical surface treatment on fatigue failure in Ti-6Al-4V: role of residual stresses and foreign-object damage. Mater. Sci. Forum 404 (2002), 457–462.
    • (2002) Mater. Sci. Forum , vol.404 , pp. 457-462
    • Altenberger, I.1    Noster, U.2    Boyce, B.L.3    Peters, J.O.4    Scholtes, B.5    Ritchie, R.O.6
  • 7
    • 0037410020 scopus 로고    scopus 로고
    • An in situ transmission electron microscope study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening
    • Altenberger, I., Stach, E.A., Liu, G., Nalla, R.K., Ritchie, R.O., An in situ transmission electron microscope study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening. Scr. Mater. 48 (2003), 1593–1598.
    • (2003) Scr. Mater. , vol.48 , pp. 1593-1598
    • Altenberger, I.1    Stach, E.A.2    Liu, G.3    Nalla, R.K.4    Ritchie, R.O.5
  • 8
    • 0037774801 scopus 로고    scopus 로고
    • Residual stress stability and near-surface microstructures in high temperature fatigued mechanically surface treated Ti-6Al-4V
    • Altenberger, I., Nalla, R.K., Noster, U., Liu, G., Scholtes, B., Ritchie, R.O., Residual stress stability and near-surface microstructures in high temperature fatigued mechanically surface treated Ti-6Al-4V. Materialwiss. Werkstofftech. 34 (2003), 529–541.
    • (2003) Materialwiss. Werkstofftech. , vol.34 , pp. 529-541
    • Altenberger, I.1    Nalla, R.K.2    Noster, U.3    Liu, G.4    Scholtes, B.5    Ritchie, R.O.6
  • 9
    • 84864442433 scopus 로고    scopus 로고
    • On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 °C
    • Altenberger, I., Nalla, R.K., Sano, Y., Wagner, L., Ritchie, R.O., On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 °C. Int. J. Fatigue 44 (2012), 292–302.
    • (2012) Int. J. Fatigue , vol.44 , pp. 292-302
    • Altenberger, I.1    Nalla, R.K.2    Sano, Y.3    Wagner, L.4    Ritchie, R.O.5
  • 10
    • 84992595308 scopus 로고    scopus 로고
    • Nanoscale near-surface microstructures and high temperature fatigue of laser-shock peened and deep rolled Ti-6Al-4V
    • Altenberger, I., Wagner, L., Sano, Y., Nanoscale near-surface microstructures and high temperature fatigue of laser-shock peened and deep rolled Ti-6Al-4V. Rev. Laser Eng. 42 (2014), 489–493.
    • (2014) Rev. Laser Eng. , vol.42 , pp. 489-493
    • Altenberger, I.1    Wagner, L.2    Sano, Y.3
  • 11
    • 35148898656 scopus 로고    scopus 로고
    • Alternative mechanical surface treatments for fatigue strength enhancement
    • Altenberger, I., Alternative mechanical surface treatments for fatigue strength enhancement. Mater. Sci. Forum 490 (2005), 328–333.
    • (2005) Mater. Sci. Forum , vol.490 , pp. 328-333
    • Altenberger, I.1
  • 12
    • 77957880537 scopus 로고    scopus 로고
    • Deep rolling—the past, the present and the future
    • V. Schulze A. Niku-Lari Paris, France IITT-International
    • Altenberger, I., Deep rolling—the past, the present and the future. Schulze, V., Niku-Lari, A., (eds.) Proceedings of 9th International Conference on Shot Peening, Paris, France, 2005, IITT-International, 144–155.
    • (2005) Proceedings of 9th International Conference on Shot Peening , pp. 144-155
    • Altenberger, I.1
  • 14
    • 84868315618 scopus 로고    scopus 로고
    • An investigation of the mechanics of roller burnishing through finite element simulation and experiments
    • Balland, P., Tabourot, L., Degre, F., Moreau, V., An investigation of the mechanics of roller burnishing through finite element simulation and experiments. Int. J. Mach. Tools Manuf. 65 (2013), 29–36.
    • (2013) Int. J. Mach. Tools Manuf. , vol.65 , pp. 29-36
    • Balland, P.1    Tabourot, L.2    Degre, F.3    Moreau, V.4
  • 17
    • 84940191043 scopus 로고    scopus 로고
    • Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling
    • Bertini, L., Santus, C., Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling. Int. J. Fatigue 81 (2015), 179–190.
    • (2015) Int. J. Fatigue , vol.81 , pp. 179-190
    • Bertini, L.1    Santus, C.2
  • 18
    • 20644466649 scopus 로고    scopus 로고
    • Finite element modeling of burnishing of AISI 1042 steel
    • Bouzid Saï, W., Saï, K., Finite element modeling of burnishing of AISI 1042 steel. Int. J. Adv. Manuf. Technol. 25 (2004), 460–465.
    • (2004) Int. J. Adv. Manuf. Technol. , vol.25 , pp. 460-465
    • Bouzid Saï, W.1    Saï, K.2
  • 21
    • 35048866428 scopus 로고    scopus 로고
    • Approach of residual stress generated by deep rolling—application to the reinforcement of the fatigue resistance of crankshafts
    • Galzy, F., Michaud, H., Sprauel, J.M., Approach of residual stress generated by deep rolling—application to the reinforcement of the fatigue resistance of crankshafts. Mater. Sci. Forum 490 (2005), 384–389.
    • (2005) Mater. Sci. Forum , vol.490 , pp. 384-389
    • Galzy, F.1    Michaud, H.2    Sprauel, J.M.3
  • 23
    • 84941271206 scopus 로고    scopus 로고
    • Finite element approach toward an advanced understanding of deep rolling induced residual stresses, and an application to railway axles
    • Hassani-Gangaraj, S.M., Carboni, M., Guagliano, M., Finite element approach toward an advanced understanding of deep rolling induced residual stresses, and an application to railway axles. Mater. Des. 83 (2015), 689–703.
    • (2015) Mater. Des. , vol.83 , pp. 689-703
    • Hassani-Gangaraj, S.M.1    Carboni, M.2    Guagliano, M.3
  • 24
    • 84901776409 scopus 로고    scopus 로고
    • Shot Peening method for aerofoil treatment of blisk assemblies
    • Hennig, W., Feldmann, G., Haubold, T., Shot Peening method for aerofoil treatment of blisk assemblies. Procedia CIRP 13 (2014), 355–358.
    • (2014) Procedia CIRP , vol.13 , pp. 355-358
    • Hennig, W.1    Feldmann, G.2    Haubold, T.3
  • 25
    • 33749520508 scopus 로고    scopus 로고
    • Residual stress relaxation of deep-rolled Al–Mg–Si–Cu alloy during cyclic loading at elevated temperatures
    • Juijerm, P., Altenberger, I., Residual stress relaxation of deep-rolled Al–Mg–Si–Cu alloy during cyclic loading at elevated temperatures. Scr. Mater. 55 (2006), 1111–1114.
    • (2006) Scr. Mater. , vol.55 , pp. 1111-1114
    • Juijerm, P.1    Altenberger, I.2
  • 26
    • 33748306111 scopus 로고    scopus 로고
    • Fatigue behavior of deep rolled Al–Mg–Si–Cu alloy at elevated temperature
    • Juijerm, P., Altenberger, I., Fatigue behavior of deep rolled Al–Mg–Si–Cu alloy at elevated temperature. Scr. Mater. 55 (2006), 943–946.
    • (2006) Scr. Mater. , vol.55 , pp. 943-946
    • Juijerm, P.1    Altenberger, I.2
  • 27
    • 33847309563 scopus 로고    scopus 로고
    • Effect of temperature on cyclic deformation behavior and residual stress relaxation of deep rolled under-aged aluminium alloy AA6110
    • Juijerm, P., Altenberger, I., Effect of temperature on cyclic deformation behavior and residual stress relaxation of deep rolled under-aged aluminium alloy AA6110. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process. 452 (2007), 475–482.
    • (2007) Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process. , vol.452 , pp. 475-482
    • Juijerm, P.1    Altenberger, I.2
  • 28
    • 33847180528 scopus 로고    scopus 로고
    • Effective boundary of deep-rolling treatment and its correlation with residual stress stability of Al–Mg–Mn and Al–Mg–Si–Cu alloys
    • Juijerm, P., Altenberger, I., Effective boundary of deep-rolling treatment and its correlation with residual stress stability of Al–Mg–Mn and Al–Mg–Si–Cu alloys. Scr. Mater. 56 (2007), 745–748.
    • (2007) Scr. Mater. , vol.56 , pp. 745-748
    • Juijerm, P.1    Altenberger, I.2
  • 29
    • 37849189188 scopus 로고    scopus 로고
    • Effect of high-temperature deep rolling on cyclic deformation behavior of solution-heat-treated Al–Mg–Si–Cu alloy
    • Juijerm, P., Altenberger, I., Effect of high-temperature deep rolling on cyclic deformation behavior of solution-heat-treated Al–Mg–Si–Cu alloy. Scr. Mater. 56 (2007), 285–288.
    • (2007) Scr. Mater. , vol.56 , pp. 285-288
    • Juijerm, P.1    Altenberger, I.2
  • 30
    • 34347237242 scopus 로고    scopus 로고
    • Cyclic deformation behavior of deep rolled as-quenched aluminium alloy AA6110 at elevated temperatures
    • Juijerm, P., Altenberger, I., Cyclic deformation behavior of deep rolled as-quenched aluminium alloy AA6110 at elevated temperatures. Int. J. Mater. Res. 98 (2007), 506–510.
    • (2007) Int. J. Mater. Res. , vol.98 , pp. 506-510
    • Juijerm, P.1    Altenberger, I.2
  • 31
    • 3242703452 scopus 로고    scopus 로고
    • Fatigue of deep rolled AlMg4.5Mn (AA5083) in the temperature range 20–300 °C
    • Juijerm, P., Noster, U., Altenberger, I., Scholtes, B., Fatigue of deep rolled AlMg4.5Mn (AA5083) in the temperature range 20–300 °C. Mater. Sci. Eng.: A 379 (2004), 286–292.
    • (2004) Mater. Sci. Eng.: A , vol.379 , pp. 286-292
    • Juijerm, P.1    Noster, U.2    Altenberger, I.3    Scholtes, B.4
  • 32
    • 33744904474 scopus 로고    scopus 로고
    • Fatigue and residual stress relaxation of deep rolled differently aged aluminium alloy AA6110
    • Juijerm, P., Altenberger, I., Scholtes, B., Fatigue and residual stress relaxation of deep rolled differently aged aluminium alloy AA6110. Mater. Sci. Eng.: A 426 (2006), 4–10.
    • (2006) Mater. Sci. Eng.: A , vol.426 , pp. 4-10
    • Juijerm, P.1    Altenberger, I.2    Scholtes, B.3
  • 33
    • 33947267063 scopus 로고    scopus 로고
    • Influence of ageing on cyclic deformation behavior and residual stress relaxation of deep rolled as-quenched aluminium alloy AA6110
    • Juijerm, P., Altenberger, I., Scholtes, B., Influence of ageing on cyclic deformation behavior and residual stress relaxation of deep rolled as-quenched aluminium alloy AA6110. Int. J. Fatigue 29 (2007), 1374–1382.
    • (2007) Int. J. Fatigue , vol.29 , pp. 1374-1382
    • Juijerm, P.1    Altenberger, I.2    Scholtes, B.3
  • 34
    • 14744281546 scopus 로고    scopus 로고
    • Fundamentals of the deep rolling of compressor blades for turbo aircraft engines
    • Klocke, F., Mader, S., Fundamentals of the deep rolling of compressor blades for turbo aircraft engines. Steel Res. Int. 76 (2005), 229–235.
    • (2005) Steel Res. Int. , vol.76 , pp. 229-235
    • Klocke, F.1    Mader, S.2
  • 35
    • 0023844884 scopus 로고
    • Improvement in fatigue properties by means of deep rolling
    • Kloos, K.H., Adelmann, J., Improvement in fatigue properties by means of deep rolling. Materialwiss. Werkstofftech. 19 (1988), 15–23.
    • (1988) Materialwiss. Werkstofftech. , vol.19 , pp. 15-23
    • Kloos, K.H.1    Adelmann, J.2
  • 36
    • 0023145482 scopus 로고
    • Fatigue properties of specimens similar to components deep rolled under optimized conditions
    • Kloos, K.H., Fuchsbauer, B., Adelmann, J., Fatigue properties of specimens similar to components deep rolled under optimized conditions. Int. J. Fatigue 9 (1987), 35–42.
    • (1987) Int. J. Fatigue , vol.9 , pp. 35-42
    • Kloos, K.H.1    Fuchsbauer, B.2    Adelmann, J.3
  • 37
    • 16644387776 scopus 로고    scopus 로고
    • Thermal shock damage of hot-work tool steel AISI H11 in hard turned, electroeroded, shot-peened or deep rolled surface conditions
    • Krauss, M., Scholtes, B., Thermal shock damage of hot-work tool steel AISI H11 in hard turned, electroeroded, shot-peened or deep rolled surface conditions. J. Mater. Sci. Technol. 20 (2004), 93–96.
    • (2004) J. Mater. Sci. Technol. , vol.20 , pp. 93-96
    • Krauss, M.1    Scholtes, B.2
  • 38
    • 34547551376 scopus 로고    scopus 로고
    • Surface treatment by shot peening and deep rolling—mechanisms, modelling, methods
    • Leitner, H., Gaenser, H.-P., Eichlseder, W., Surface treatment by shot peening and deep rolling—mechanisms, modelling, methods. Materialprufung 49 (2007), 408–413.
    • (2007) Materialprufung , vol.49 , pp. 408-413
    • Leitner, H.1    Gaenser, H.-P.2    Eichlseder, W.3
  • 39
    • 78649733093 scopus 로고    scopus 로고
    • Microstructure characteristics of ultrasound-aided deep rolling treated Ti6Al4V alloy
    • Li, L., Zhu, Y., Microstructure characteristics of ultrasound-aided deep rolling treated Ti6Al4V alloy. Rare Met. Mater. Eng. 39 (2010), 1754–1758.
    • (2010) Rare Met. Mater. Eng. , vol.39 , pp. 1754-1758
    • Li, L.1    Zhu, Y.2
  • 40
    • 65149099859 scopus 로고    scopus 로고
    • Influence of ultrasonic deep rolling on reducing surface roughness and healing surface scar of TC4 titanium alloy
    • Li, L., Zhu, Y., Lue, G., Influence of ultrasonic deep rolling on reducing surface roughness and healing surface scar of TC4 titanium alloy. Rare Met. Mater. Eng. 38 (2009), 339–342.
    • (2009) Rare Met. Mater. Eng. , vol.38 , pp. 339-342
    • Li, L.1    Zhu, Y.2    Lue, G.3
  • 42
    • 79951669709 scopus 로고    scopus 로고
    • Investigation on the surface and near-surface characteristics of Ti-2.5Cu after various mechanical surface treatments
    • Maawad, E., Brokmeier, H.G., Wagner, L., Sano, Y., Genzel, C., Investigation on the surface and near-surface characteristics of Ti-2.5Cu after various mechanical surface treatments. Surf. Coat. Technol. 205 (2011), 3644–3650.
    • (2011) Surf. Coat. Technol. , vol.205 , pp. 3644-3650
    • Maawad, E.1    Brokmeier, H.G.2    Wagner, L.3    Sano, Y.4    Genzel, C.5
  • 44
    • 79958248940 scopus 로고    scopus 로고
    • Numerical simulation of residual stress induced by roll-peening
    • Majzoobi, G.H., Motlagh, S.T., Amiri, A., Numerical simulation of residual stress induced by roll-peening. Trans. Indian Inst. Met. 63 (2010), 499–504.
    • (2010) Trans. Indian Inst. Met. , vol.63 , pp. 499-504
    • Majzoobi, G.H.1    Motlagh, S.T.2    Amiri, A.3
  • 45
    • 84956583880 scopus 로고    scopus 로고
    • Experimental and numerical studies on the effect of deep rolling on bending fretting fatigue resistance of Al7075
    • Majzoobi, G.H., Jouneghani, F.Z., Khademi, E., Experimental and numerical studies on the effect of deep rolling on bending fretting fatigue resistance of Al7075. Int. J. Adv. Manuf. Technol. 82 (2016), 2137–2148.
    • (2016) Int. J. Adv. Manuf. Technol. , vol.82 , pp. 2137-2148
    • Majzoobi, G.H.1    Jouneghani, F.Z.2    Khademi, E.3
  • 46
    • 84992665764 scopus 로고    scopus 로고
    • Finite Element Simulation of Deep Rolling and Evaluate the Influence of Parameters on Residual Stress Recent Researches in Applied Mechanics
    • WSEAS Press Athens
    • Manouchehrifar, A., Alasvand, K., Finite Element Simulation of Deep Rolling and Evaluate the Influence of Parameters on Residual Stress Recent Researches in Applied Mechanics. 2009, WSEAS Press, Athens, 121–127.
    • (2009) , pp. 121-127
    • Manouchehrifar, A.1    Alasvand, K.2
  • 47
    • 75849127578 scopus 로고    scopus 로고
    • Surface modification to enhance fatigue performance of steel: applications of deep rolling
    • Matlock, D.K., Richards, M.D., Speer, J.G., Surface modification to enhance fatigue performance of steel: applications of deep rolling. Mater. Sci. Forum 638 (2009), 142–147.
    • (2009) Mater. Sci. Forum , vol.638 , pp. 142-147
    • Matlock, D.K.1    Richards, M.D.2    Speer, J.G.3
  • 48
    • 84861602298 scopus 로고    scopus 로고
    • Cryogenic deep rolling—an energy based approach for enhanced cold surface hardening
    • Meyer, D., Cryogenic deep rolling—an energy based approach for enhanced cold surface hardening. CIRP Ann. Manuf. Technol. 61 (2012), 543–546.
    • (2012) CIRP Ann. Manuf. Technol. , vol.61 , pp. 543-546
    • Meyer, D.1
  • 49
    • 83755178000 scopus 로고    scopus 로고
    • Surface hardening by cryogenic deep rolling
    • Meyer, D., Brinksmeier, E., Hoffmann, F., Surface hardening by cryogenic deep rolling. Procedia Eng. 19 (2011), 258–263.
    • (2011) Procedia Eng. , vol.19 , pp. 258-263
    • Meyer, D.1    Brinksmeier, E.2    Hoffmann, F.3
  • 50
    • 37849050994 scopus 로고    scopus 로고
    • The residual stresses generated by deep rolling and their stability in fatigue & application to deep-rolled crankshafts
    • Michaud, H., Sprauel, J.M., Galzy, F., The residual stresses generated by deep rolling and their stability in fatigue & application to deep-rolled crankshafts. Mater. Sci. Forum 524 (2006), 45–50.
    • (2006) Mater. Sci. Forum , vol.524 , pp. 45-50
    • Michaud, H.1    Sprauel, J.M.2    Galzy, F.3
  • 51
    • 84904106985 scopus 로고    scopus 로고
    • A study on surface modification of Al7075-T6 alloy against fretting fatigue phenomenon
    • 17 pages
    • Mohseni, E., Zalnezhad, E., Sarhan, A.A.D., Bushroa, A.R., A study on surface modification of Al7075-T6 alloy against fretting fatigue phenomenon. Adv. Mater. Sci. Eng., 2014 17 pages.
    • (2014) Adv. Mater. Sci. Eng.
    • Mohseni, E.1    Zalnezhad, E.2    Sarhan, A.A.D.3    Bushroa, A.R.4
  • 52
    • 0038268660 scopus 로고    scopus 로고
    • On the influence of mechanical surface treatments—deep rolling and laser shock peening—on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures
    • Nalla, R.K., Altenberger, I., Noster, U., Liu, G.Y., Scholtes, B., Ritchie, R.O., On the influence of mechanical surface treatments—deep rolling and laser shock peening—on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures. Mater. Sci. Eng.: A 355 (2003), 216–230.
    • (2003) Mater. Sci. Eng.: A , vol.355 , pp. 216-230
    • Nalla, R.K.1    Altenberger, I.2    Noster, U.3    Liu, G.Y.4    Scholtes, B.5    Ritchie, R.O.6
  • 53
    • 84886038565 scopus 로고    scopus 로고
    • An almost user-independent evaluation formalism to determine arbitrary residual stress depth distributions with the hole-drilling method
    • Nau, A., Feldmann, G., Nobre, J., Zinn, W., Scholtes, B., An almost user-independent evaluation formalism to determine arbitrary residual stress depth distributions with the hole-drilling method. Mater. Sci. Forum 768 (2014), 120–127.
    • (2014) Mater. Sci. Forum , vol.768 , pp. 120-127
    • Nau, A.1    Feldmann, G.2    Nobre, J.3    Zinn, W.4    Scholtes, B.5
  • 54
    • 34250867504 scopus 로고    scopus 로고
    • Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25–600 °C
    • Nikitin, I., Altenberger, I., Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25–600 °C. Mater. Sci. Eng.: A 465 (2007), 176–182.
    • (2007) Mater. Sci. Eng.: A , vol.465 , pp. 176-182
    • Nikitin, I.1    Altenberger, I.2
  • 55
    • 36049049023 scopus 로고    scopus 로고
    • Residual stress relaxation of deep-rolled austenitic steel
    • Nikitin, I., Besel, M., Residual stress relaxation of deep-rolled austenitic steel. Scr. Mater. 58 (2008), 239–242.
    • (2008) Scr. Mater. , vol.58 , pp. 239-242
    • Nikitin, I.1    Besel, M.2
  • 56
    • 46249121026 scopus 로고    scopus 로고
    • Correlation between residual stress and plastic strain amplitude during low cycle fatigue of mechanically surface treated austenitic stainless steel AISI 304 and ferritic–pearlitic steel SAE 1045
    • Nikitin, I., Besel, M., Correlation between residual stress and plastic strain amplitude during low cycle fatigue of mechanically surface treated austenitic stainless steel AISI 304 and ferritic–pearlitic steel SAE 1045. Mater. Sci. Eng.: A 491 (2008), 297–303.
    • (2008) Mater. Sci. Eng.: A , vol.491 , pp. 297-303
    • Nikitin, I.1    Besel, M.2
  • 57
    • 1642274016 scopus 로고    scopus 로고
    • High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304
    • Nikitin, I., Scholtes, B., Maier, H.J., Altenberger, I., High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304. Scr. Mater. 50 (2004), 1345–1350.
    • (2004) Scr. Mater. , vol.50 , pp. 1345-1350
    • Nikitin, I.1    Scholtes, B.2    Maier, H.J.3    Altenberger, I.4
  • 58
    • 23444445806 scopus 로고    scopus 로고
    • Residual stress state and cyclic deformation behaviour of deep rolled and laser-shock peened AISI 304 stainless steel at elevated temperatures
    • Nikitin, I., Altenberger, I., Scholtes, B., Residual stress state and cyclic deformation behaviour of deep rolled and laser-shock peened AISI 304 stainless steel at elevated temperatures. Mater. Sci. Forum 490 (2005), 376–383.
    • (2005) Mater. Sci. Forum , vol.490 , pp. 376-383
    • Nikitin, I.1    Altenberger, I.2    Scholtes, B.3
  • 59
    • 23444437587 scopus 로고    scopus 로고
    • Mechanical and thermal stability of mechanically induced near-surface nanostructures
    • Nikitin, I., Altenberger, I., Maier, H.J., Scholtes, B., Mechanical and thermal stability of mechanically induced near-surface nanostructures. Mater. Sci. Eng.: A 403 (2005), 318–327.
    • (2005) Mater. Sci. Eng.: A , vol.403 , pp. 318-327
    • Nikitin, I.1    Altenberger, I.2    Maier, H.J.3    Scholtes, B.4
  • 60
    • 84901781921 scopus 로고    scopus 로고
    • Powder metallurgical components: improvement of surface integrity by deep rolling and case hardening
    • Nusskern, P., Hoffmeister, J., Schulze, V., Powder metallurgical components: improvement of surface integrity by deep rolling and case hardening. Procedia CIRP 13 (2014), 192–197.
    • (2014) Procedia CIRP , vol.13 , pp. 192-197
    • Nusskern, P.1    Hoffmeister, J.2    Schulze, V.3
  • 61
    • 80052266529 scopus 로고    scopus 로고
    • Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques
    • Pan, C., Liu, L., Li, Y., Wang, S., Wang, F., Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques. Electrochim. Acta 56 (2011), 7740–7748.
    • (2011) Electrochim. Acta , vol.56 , pp. 7740-7748
    • Pan, C.1    Liu, L.2    Li, Y.3    Wang, S.4    Wang, F.5
  • 62
    • 84919935025 scopus 로고    scopus 로고
    • Residual stresses after deep rolling of a torsion bar made from high strength steel
    • Perenda, J., Trajkovski, J., Žerovnik, A., Prebil, I., Residual stresses after deep rolling of a torsion bar made from high strength steel. J. Mater. Process. Technol. 218 (2015), 89–98.
    • (2015) J. Mater. Process. Technol. , vol.218 , pp. 89-98
    • Perenda, J.1    Trajkovski, J.2    Žerovnik, A.3    Prebil, I.4
  • 63
    • 84869994607 scopus 로고    scopus 로고
    • Influence of deep cold rolling and low plasticity burnishing on surface hardness and surface roughness of AISI 4140 steel
    • Prabhu, P., Kulkarni, S., Sharma, S., Influence of deep cold rolling and low plasticity burnishing on surface hardness and surface roughness of AISI 4140 steel. World Acad. Sci. Eng. Technol. 72 (2010), 619–624.
    • (2010) World Acad. Sci. Eng. Technol. , vol.72 , pp. 619-624
    • Prabhu, P.1    Kulkarni, S.2    Sharma, S.3
  • 64
    • 84910091428 scopus 로고    scopus 로고
    • An investigation about the influence of deep rolling on fatigue crack growth in railway axles made of a medium strength steel
    • Regazzi, D., Beretta, S., Carboni, M., An investigation about the influence of deep rolling on fatigue crack growth in railway axles made of a medium strength steel. Eng. Fract. Mech. 131 (2014), 587–601.
    • (2014) Eng. Fract. Mech. , vol.131 , pp. 587-601
    • Regazzi, D.1    Beretta, S.2    Carboni, M.3
  • 66
    • 84880541916 scopus 로고    scopus 로고
    • Influence of process parameters on surface hardening in hammer peening and deep rolling
    • Scheil, J., Mueller, C., Steitz, M., Groche, P., Influence of process parameters on surface hardening in hammer peening and deep rolling. Key Eng. Mater. 554 (2013), 1819–1827.
    • (2013) Key Eng. Mater. , vol.554 , pp. 1819-1827
    • Scheil, J.1    Mueller, C.2    Steitz, M.3    Groche, P.4
  • 68
    • 84906657158 scopus 로고    scopus 로고
    • Review of residual stress modification techniques for extending the fatigue life of metallic aircraft components
    • Sticchi, M., Schnubel, D., Kashaev, N., Huber, N., Review of residual stress modification techniques for extending the fatigue life of metallic aircraft components. Appl. Mech. Rev. 67 (2015), 010801–010810.
    • (2015) Appl. Mech. Rev. , vol.67 , pp. 010801-010810
    • Sticchi, M.1    Schnubel, D.2    Kashaev, N.3    Huber, N.4
  • 69
    • 84886044262 scopus 로고    scopus 로고
    • Corrosion and fatigue of AL-alloys AA359.0 and AA6060 in different surface treatment states
    • Timmermann, K., Zinn, W., Scholtes, B., Corrosion and fatigue of AL-alloys AA359.0 and AA6060 in different surface treatment states. Mater. Sci. Forum 768 (2013), 572–579.
    • (2013) Mater. Sci. Forum , vol.768 , pp. 572-579
    • Timmermann, K.1    Zinn, W.2    Scholtes, B.3
  • 70
    • 84881142879 scopus 로고    scopus 로고
    • Time-efficient prediction of the surface layer state after deep rolling using similarity mechanics approach
    • Trauth, D., Klocke, F., Mattfeld, P., Klink, A., Time-efficient prediction of the surface layer state after deep rolling using similarity mechanics approach. Procedia CIRP 9 (2013), 29–34.
    • (2013) Procedia CIRP , vol.9 , pp. 29-34
    • Trauth, D.1    Klocke, F.2    Mattfeld, P.3    Klink, A.4
  • 71
    • 80052956409 scopus 로고    scopus 로고
    • Residual stress analysis of shot-peened aluminum alloy by fine increment hole-drilling and X-ray diffraction methods
    • Valentini, E., Santus, C., Bandini, M., Residual stress analysis of shot-peened aluminum alloy by fine increment hole-drilling and X-ray diffraction methods. Procedia Eng. 10 (2011), 3582–3587.
    • (2011) Procedia Eng. , vol.10 , pp. 3582-3587
    • Valentini, E.1    Santus, C.2    Bandini, M.3
  • 72
    • 0039130861 scopus 로고    scopus 로고
    • Mechanical surface treatments on titanium, aluminum and magnesium alloys
    • Wagner, L., Mechanical surface treatments on titanium, aluminum and magnesium alloys. Mater. Sci. Eng.: A 263 (1999), 210–216.
    • (1999) Mater. Sci. Eng.: A , vol.263 , pp. 210-216
    • Wagner, L.1
  • 73
    • 84901766303 scopus 로고    scopus 로고
    • Deep cold rolling of features on aero-engine components
    • Wong, C.C., Hartawan, A., Teo, W.K., Deep cold rolling of features on aero-engine components. Procedia CIRP 13 (2014), 350–354.
    • (2014) Procedia CIRP , vol.13 , pp. 350-354
    • Wong, C.C.1    Hartawan, A.2    Teo, W.K.3
  • 74
  • 75
  • 76
    • 84887551879 scopus 로고    scopus 로고
    • Investigation of the influence of deep rolling on the thermal fatigue cracking for AISI H13 steel
    • Zhang, L., Lei, L., Zeng, P., Investigation of the influence of deep rolling on the thermal fatigue cracking for AISI H13 steel. Appl. Mech. Mater. 457 (2014), 127–130.
    • (2014) Appl. Mech. Mater. , vol.457 , pp. 127-130
    • Zhang, L.1    Lei, L.2    Zeng, P.3
  • 77
    • 84919383949 scopus 로고    scopus 로고
    • Deep surface rolling for fatigue life enhancement of laser clad aircraft aluminium alloy
    • Zhuang, W., Liu, Q., Djugum, R., Sharp, P.K., Paradowska, A., Deep surface rolling for fatigue life enhancement of laser clad aircraft aluminium alloy. Appl. Surf. Sci. 320 (2014), 558–562.
    • (2014) Appl. Surf. Sci. , vol.320 , pp. 558-562
    • Zhuang, W.1    Liu, Q.2    Djugum, R.3    Sharp, P.K.4    Paradowska, A.5
  • 78
    • 0002906285 scopus 로고    scopus 로고
    • Mechanical surface treatments of lightweight materials—effects on fatigue strength and near-surface microstructures
    • Zinn, W., Scholtes, B., Mechanical surface treatments of lightweight materials—effects on fatigue strength and near-surface microstructures. J. Mater. Eng. Perform. 8 (1999), 145–151.
    • (1999) J. Mater. Eng. Perform. , vol.8 , pp. 145-151
    • Zinn, W.1    Scholtes, B.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.