Surface treatment of materials for adhesive bonding

Surface Treatment of Materials for Adhesive Bonding: Second Edition

Volumn , Issue , 2013, Pages 1-341

  Ebnesajjad, Sina ^a  

^a FluoroConsultants Group   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85076271638     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2013-0-12914-5     Document Type: Book

References (466)

1. Modified from ASTM D907-12a, Standard Terminology of Adhesives, published in Volume 15.06: Adhesives, 2012 Annual Book of ASTM Standards.
2. S. Wu Polymer interface and adhesion 1st ed. 1982 CRC Press New York.
3. Staff written, Joining Techniques, Section 4, Machine Design, Fastening and Joining Reference Issue, 48(26):155-162. (November 18, 1976)..
4. E.M. Petrie Plastics and adhesives as adhesives C.A. Harper. Handbook of plastics and elastomers 1975 McGraw-Hill New York.
5. S. Wu Polymer interface and adhesion 1st ed. 1982 Marcel Dekker, Inc. New York.
6. S. Wu J Adhesion 5 1973 39-55.
7. N.K. Adam The Physics and Chemistry of Surfaces 3rd ed 1941 Oxford University Press.
8. H.W. Fox., W.A. Zissman J Colloid Interface Sci 5 1950 514.
9. L.H. Lee Fundamentals of adhesion 1991 Plenum Press New York.
10. T. Young Phil Trans Roy Soc (London) 95 1805 65.
11. J.W. Gibbs The collected works of J. W. Gibbs 1931 Longmans, Green New York.
12. The scientific papers of J. Willard Gibbs, vol. 1. Thermodynamics. New York: Dover; 1961..
13. R.E. Johnson, Jr. J Phys Chem 63 1959 1655.
14. J.H. Poynting., J.J. Thompson, pub. by A textbook of physics: properties of matter 8th ed. 1920 Charles Griffin London.
15. F.E. Bartell., L.S. Bartell J Am Chem Soc 56 1934 2205.
16. W.D. Harkins., H.K. Livingston J Chem Phys 10 1942 342.
17. Padday JF. Apparatus for measuring the spreading coefficient of a liquid, on a solid surface, J Sci Instr, vol. 36 (June 1959);
18. Padday, JF, Proceedings of the Second International Conference of Surface Activity, III:136, London: Butterworths Scientific Publications 1958.
19. Bashforth S, Adams JC. An attempt to test the theory of capillary action, Cambridge Univ. Press and Deighton Pub, Bell and Co., London, UK, 1892.
20. E.A. Guggenheim J Chem Phys 13 1945 253.
21. D.R. Paul., S. Newman Polymer blends 1978 Academic Press New York.
22. J.F. Padday E. Matijevic. Surface and Colloid Science 1 1969 Wiley New York.
23. L. Wilhelmy Ueber die Abhangigkeit der Capillaritats - Constanten des Alkohol con Substanz und Gestalt des benetzten festen Korpers Ann Physik 119 1863 177-217.
24. P. Lecomte du Nouy A new apparatus for measuring surface tension J Gen Physiol 1 1919 521-524.
25. W.D. Harkins., H.F. Jordan J Am Chem Soc 52 1930 1756.
26. B.B. Freud., H.Z. Freud J Am Chem Soc 52 1930 1772.
27. H.W. Fox., W.A. Zissman J Colloid Sci 7 1952 109.
28. H.W. Fox., W.A. Zissman J Colloid Sci 7 1952 428.
29. F.D. Petke., B.R. Jay J Colloid Interface Sci 31 1969 216.
30. Abhinandan Agrawal, Surface Tension of Polymers, Hatsopoulos Microfluids Laboratory, Department of Mechanical Engineering, Massachusetts Institute of Technology, ; June 29, 2005.
31. S. Wu Surface and interfacial tensions of polymer melts. II, poly(methyl methacrylate), poly(n-butyl methacrylate) and polystyrene J Phys Chem 74 3 1970.
32. S. Wu J Polym Sci C34 1971 19.
33. F.M. Fowkes Chemistry and physics of interfaces 1965 American Chemical Society Washington, DC, pp. 1-2.
34. E.F. Meyer., R.E. Wagner J Phys Chem 70 1966 3162.
35. E.F. Meyer., T.A. Renner., K.S. Stec J Phys Chem 75 1971 642.
36. R.J. Good., L.A. Girifalco J Phys Chem 61 1957 904.
37. R.J. Good Advan Chem Ser 43 1964 74.
38. R.J. Good R.L. Patrick. Treatise on adhesion and adhesives vol. 1 1967 Marcel Dekker New York.
39. D.Y. Kwok., A.W. Neumann Contact angle measurement and contact angle interpretation Adv Colloid Interf Sci 81 1999 167-249.
40. F.M. Fowkes J Phys Chem 66 1962 382.
41. D.K. Owens., R.C. Wendt J Appl Polym Sci 13 1969 1741.
42. D.H. Kaelble J Adhesion 2 1970 50.
43. S. Wu Polymer interface and adhesion 1st ed. 1982 Marcel Dekker, Inc. New York.
44. F.M. Fowkes Acid-base interactions in polymer adhesion K.L. Mittal. Physico-chemical aspects of polymers surfaces vol. 2 1983 Plenum Press New York.
45. F.M. Fowkes., S. Maruchi Org Coat Plast Chem Prep 37 1977 605.
46. F.M. Fowkes., M.A. Mostafa Ind Eng Chem Prod Res Dev 17 1978 3.
47. E.A. Guggenheim J Chem Phys 13 1945 253.
48. H.W. Fox., W.A. Zisman J Colloid Sci 5 1950 514.
49. H.W. Fox., W.A. Zisman J Colloid Sci 7 1952 109.
50. H.W. Fox., W.A. Zisman J Colloid Sci 7 1952 428.
51. A.W. Adamson Physical chemistry of surfaces 2nd ed. 1967 Wiley-Interscience New York.
52. F.M. Fowkes Chemistry and physics of interfaces vol. 1 1965 American Chemical Society Washington, DC pp. 1-12.
53. F.M. Fowkes Chemistry and physics of interfaces vol. 2 1971 American Chemical Society Washington, DC pp. 153-168.
54. D.W. van Krevelen., K. te Nijenhuis Properties of polymers 2009 Elsevier Oxford, UK.
55. L. Grunberg., A.H. Nissan Trans Faraday Soc 45 1949 125.
56. J.H. Hildebrand., R.L. Scott The solubility of non-electrolytes 3rd ed. 1950 Reinhold Publishing Corp New York.
57. J.C. McGowan Polymer 8 1967 57.
58. L. Makkonen Misinterpretation of the Shuttleworth equation Scr Mater 66 2012 627-629.
59. E.M. Gutman J Phys: Condens Matter 7 1995 L663.
60. G. Lang., K.E. Heusler J Electroanal Chem 472 1999 168.
61. D.J. Bottomley., T. Ogino Phys Rev B 63 2001 165412.
62. L. Makkonen Langmuir 18 2002 1445.
63. D.J. Bottomley., T. Ogino Phys Rev B 70 2004 159903 (E).
64. D.J. Bottomley., L. Makkonen., K. Kolari Surf Sci 603 2008 97.
65. E.M. Gutman J Phys: Condens Matter 22 2010 428001.
66. V.A. Marichev Prot Met Phys Chem Surf 47 2011 25.
67. D. Kramer., J. Weissmuller Surf Sci 601 2007 3042.
68. J.S. Vermaak., C.W. Maus., D. Kuhlmann-Wilsdorf Surf Sci 12 1968 128.
69. V.A. Marichev Philos Mag 89 2009 3037.
70. A.I. Rusanov Surf Sci Rep 58 2005 111.
71. M.E. Gurtin., A.I. Murdoch Int J Solids Struct 14 1978 431.
72. W.G. Wolfer Acta Mater 59 2011 7736.
73. Evans C. and Associates. 810 Kifer Road, Sunnyvale, CA 94086, ; 2004.
74. UK Surface Analysis Forum. ; 2013.
75. University of Alberta, Alberta Center for Surface Eng. and Sci, ; 2013.
76. C.M. Chan Polymer surface modification and characterization 1993 Hanser Publishers Munich.
77. I.M. Stewart J.L. McCall., W. Mueller Microstructural analysis: tools and techniques 1973 Plenum Press New York 281-285.
78. N. Tsuda Fluoropolymer emulsion for high-performance coatings 2001 Daikin Industries Ltd. Osaka, Japan.
79. .
80. Siegbahn K, et al. ESCA: atomic, molecular, and solid state structure studied by means of electron spectroscopy, Acta Regiae Sco. Sci. Upsaliensis, Ser. IV, vol. 20. Stockholm: Almqvist and Wiksells; 1967.
81. K. Siegbahn., et al. ESCA applied to free molecules 1969 North-Holland Amsterdam.
82. D.R. Wheeler., S.V. Pepper J Vac Sci Technol 20 1982 226.
83. D. Briggs D.M. Brewis. Surface analysis and pretreatment of plastics and metals 1982 Macmillan New York 73.
84. D. Briggs Ency. polymer science 16 1988 John Wiley and Sons.
85. C.M. Chan Polymer surface modification and characterization 1994 Hanser Publishers Munich.
86. Brewis DM. Surface modification of fluoropolymers for adhesion, Paper presented at the Fluoropolymers Conference. Loughborough University, UK; 1992.
87. L.E. Davis., N.C. MacDonald., P.W. Palmberg., G.E. Riach., R.E. Weber Handbook of Auger electron spectroscopy 2nd ed. 1976 Physical Electronics Industries Eden Prairie, MN.
88. Univ. of Alberta, Center for Surface Engineering and Science, .
89. E. Taglauer., W. Heiland Appl Phys 9 1976 261.
90. A. Brown., J.C. Vickerman Surf Interface Anal 6 1984 1.
91. D. Briggs., A.B. Wotton Surf Interface Anal 4 1982 109.
92. Ernstsson Ref M, Wrnheim T. In: Johansson I, Somasundaran P, editors. Handbook for cleaning and decontamination of surfaces. 2007. pp. 747-89.
93. McGraw-Hill encyclopedia of chemistry. 2nd ed. Parker SP, editor-in-chief. New York: McGraw-Hill, Inc.; 1992.
94. www.public.asu.edu/~ionize/polymer.html/.
95. M. Ezrin Plastics failure guide: cause and prevention 1996 Hanser Publishers New York.
96. A.G. Marshall., F.R. Verdun Fourier transforms in NMR, optical, and mass spectrometry 1989 Elsevier New York.
97. Analytical Instrument Laboratory, North Carolina State University, ; June 2013.
98. Cotton FA, Wilkinson G. Advanced inorganic chemistry. 5th ed. pp. 58-62.
99. Hoffman R. Solids & surfaces: a chemist’s view of bonding in extended structures. pp. 71-4.
100. ; June 2013.
101. GC/MS/MS Analysis of Alkylated Polycyclic Aromatic Hydrocarbons, VARIAN Application Notes, GCMS44:0695, .
102. Elmer P. Measurement and calculation of kinetic parameters for the crystallization of poly(ether ether ketone) (PEEK). Ther Anal Newsl .
103. F.A. Bovey High resolution NMR of macromolecules 1972 Academic Press New York.
104. Krause A, Lange A, Ezrin M, In: K. Rubytranslated by, Plastics analysis guide: chemical and instrumental methods. Munich: Hanser Publishers; 1979.
105. D. Campbell., J.R. White., R.A. Pethrick Polymer characterization, physical techniques 2nd ed. 1999 International Thomson Publishing Services Ltd.
106. www.mri.psu.edu.
107. Plastics Technology Laboratories, Inc., 50 Pearl Street, Pittsfield, MA 01201, .
108. www.Triton-Technology.Co.UK.
109. R.B. Bird., W.E. Stewart., E.N. Lightfoot Transport phenomena 2nd ed. 2001 Wiley New York.
110. J.M. Dealy., K.F. Wissbrun Melt rheology and its role in plastics processing: theory and applications 1990 Springer.
111. F.N. Cogswell Polymer melt rheology: a guide for industrial practice 1994 Woodhead Publishing.
112. G.P. Anderson Analysis and testing of adhesive bonds 1977 Academic Press New York.
113. Gaston T. Building a better adhesive bond. Machine Design ; November 6, 2003.
114. N.J. DeLolis Adhesives, adherends, adhesion 1985 Robert E. Krieger Publishing Co. Huntington, NY.
115. L.H. Lee Fundamentals of adhesion 1991 Plenum Press New York.
116. E.M. Petrie Plastics and adhesives as adhesives C.A. Harper. Handbook of plastics and elastomers 1975 McGraw-Hill New York.
117. K.W. Allen Int J Adhes 13 1993 67.
118. J.A. Bishopp Surface pretreatment for structural bonding P. Cognard. Handbook of adhesives and sealants, Vol. 1: adhesives and sealants: basic concepts and high tech bonding 2005 Elsevier.
119. B.V. Deraguin., V.P. Smilga J Appl Phys 38 1967 4609.
120. B.V. Deraguin., Y.P. Toporov Physiochem Asp Polym Proc Int Symp 2 1983 605.
121. J.A. Cross Surf Contam Genesis Detec, Control Proc Symp 1 1979.
122. W. Possart Int J Adhes 8 1988 77.
123. A.D. Roberts J Phys D 10 1977 1801.
124. Roberts AD. Adhesion. vol. 1. London; 1977. p. 207.
125. S. Wu Polymer interface and adhesion 1st ed. 1982 Marcel Dekker, Inc. New York.
126. Polymer adsorption, Lecture 5, Colloidal dispersions. American Chemical Society, ; 2005.
127. Parker SP, editor-in-chief. Encyclopedia of chemistry. 2nd ed. New York: McGraw-Hill, Inc.; 1992.
128. F.M. Fowkes Acid-base interactions in polymer adhesion K.L. Mittal. Physico-chemical aspects of polymers surfaces vol. 2 1983 Plenum Press New York.
129. Fowkes FM. Attractive forces at solid-liquid interface: wetting, SCI Monograph No. 25. London; 1967.
130. F.M. Fowkes., S. Maruchi Org Coat Plast Chem Prep 37 1977 605.
131. F.M. Fowkes., M.A. Mostafa Ind Eng Chem, Prod Res Dev 17 1978 3.
132. V. Gutmann Donor-acceptor approach to molecular interaction 1978 Plenum Press New York.
133. J.C. Bolger., A.S. Michaels P. Weiss., G. Dale Cheever Molecular structure and electrostatic interaction of polymer-solid interface, Interface conversion for polymer coatings 1968 Elsevier New York.
134. B. Douglas., D.H. McDaniel., J.J. Alexander Concepts and models of inorganic chemistry 2nd ed. 1983 John Wiley & Sons, Inc. New York.
135. I.D. Morrison., S. Ross Colloidal dispersions: suspensions, emulsions, foams 2002 Wiley Interscience.
136. J.F. Watts., M.M. Chehimi Int J Adhes Adhes 15 1995 91-94.
137. J.J. Bikerman Causes of poor adhesion Ind Eng Chem 59 9 1967 40-44.
138. Schmidt JJ. DuPont fluoroproducts, Private Communication; 2003.
139. C.V. Cagle Adhesive bonding, techniques and applications 1968 McGraw-Hill New York.
140. A.H. Landrock Adhesives technology handbook 1985 Noyes Publications Westwood, NJ.
141. A.H. Landrock Processing handbook on surface preparation for adhesive bonding, Picatinny Arsenal technical report 4883 1975 Picatinny Arsenal Dover, NJ.
142. R.C. Snogren Handbook on surface preparation 1974 Palmerton Publishing Co. New York ISBN 0686482212.
143. E.M. Petrie Plastics and elastomers as adhesives C.A. Harper. Handbook of plastics, elastomers and composites 4th ed. 2002 McGraw-Hill New York ISBN:0070266867.
144. A.J. Kinloch Introduction A.J. Kinloch. Durability of structural adhesives 1983 Kluwer Print on-Demand Publisher London and New York ISBN: 0853342148.
145. Akers SC. The function of adhesive primers in adhesive bonding of aircraft structures. In: Bodnar MJ, editor. Applied Polymer Symposia No. 19, Processing for adhesives bonded structures. New York: Interscience Publisher; 1972, pp. 23-8.
146. N.J. DeLollis (This book is the 2nd edition of a 1970 publication under the name Adhesives for metals: theory and technology) Adhesives, adherends adhesion 1980 Robert E. Krieger Publishing Co. Huntington, New York ISBN:0882759817.
147. Almeida RM, Marques AC. Crystallization of sol-gel materials. SGT Annual meeting Workshop on Crystallization. Derby, September 6-7; 2007.
148. Y. Dimitriev., Y. Ivanova., R. Iordanova History of sol-gel science and technology J Univ Chem Tech Metall 43 2 2008 181-192.
149. German Patent 736411 (Granted 6 May 1943) Anti-Reflective Coating (Geffcken W. and Berger E.), Jenaer Glasswerk Schott.
150. 2O Am Min 40 1955 147.
151. The Welding Institute, Great Abington, Cambridge, United Kingdom, ; May 2013.
152. EPA Rep for Project No., 68D99083 Development of an Environmentally Benign Primer for Metal Adhesive Bonding, September 1, 1999-September 1, 2001, ; 2013.
153. Blitshteyn M. Proceedings of the Society of Automotive Engineers, Paper No. 930052. Detroit, MI; 1993.
154. C.M. Chan Polymer surface modification and characterization 1993 Hanser Publishers Munich Ch. 7.
155. C.Y. Kim., D.A.I. Goring J Appl Polym Sci 15 1971 1357.
156. D. Briggs J Adhes 13 1982 287.
157. A.R. Blythe., D. Briggs., C.R. Kendall., D.G. Rance., V.J.I. Zichy Polymer (Guildf) 19 1979 1273.
158. D. Briggs., C.R. Kendall Int J Adhes Adhes 2 1982 13.
159. H. Schonhorn Adhesion: fundamentals and practice 1969 Gordon and Breach New York.
160. F. Garbassi., M. Morra., E. Ochiello Polymer surfaces: from physics to technology 1994 John Wiley & Sons New York Ch. 10.
161. Stobbe BD. Corona treatment 101: understanding the basics from a narrow web perspective. Label & Narrow Web Industry Magazine; Jun 1996.
162. M. Stradal., D.A.I. Goring J Adhes 8 1976 57-64.
163. Web treatment-going solventless. Stuart Greig-Sherman Treaters Limited; 2005.
164. .
165. .
166. Murokh I. Atmospheric plasma surface treatment technique. El Segundo, CA:Tri-Star Technologies, ; 2005.
167. N. Kalapat., T. Amornsakchai Surface modification of biaxially oriented polypropylene (BOPP) film using acrylic acid-corona treatment: part I. Properties and characterization of treated films Surf Coat Technol 207 2012 594-601.
168. S. Guimond., M.R. Wertheimer J Appl Polym Sci 94 2004 1291.
169. C. Chi-Ming Polymer surface modification and characterization 1994 Carl Hanser Verlag Munich, Vienna, New York.
170. I. Novak., S. Florian J Mater Sci 39 2004 2033.
171. C.-M. Chan., T.-M. Ko Surf Sci Rep 24 1996 1.
172. N. Kalapat., T. Amornsakchai., T. Srikhirin Surface modification of biaxially oriented polypropylene (BOPP) film using acrylic acid-corona treatment: part II. Long term aging surface properties to be published in Surf Coat Technol xxx 2013.
173. Ryan DL. British Patent 890,466, assigned to DuPont Co. (Feb. 28, 1962).
174. McBride RT, Wolinski LE. US Patent 3,296,011, assigned to DuPont Co. (Jan. 3, 1967).
175. Kreuz JA, Zytkus EH. US Patent 3,627,624, assigned to DuPont Co. (Sep. 16, 1969).
176. Markgraf DA. Corona treatment: an overview, published by Enercon Industries Corporation, ; 2013.
177. D.A. Markgraf Corona treatment: an overview. Coextrusion Conference Proceedings 1986 TAPPI Press Atlanta.
178. Surface treatment of polyolefins for decorating and adhesive bonding. 101 Secor Lane, Pelham Manor, New York: Ensign Ribbon Burners LLC, (reprint courtesy Phillips Petroleum Co.).
179. Quadrant Plastic Composites, ; 2002.
180. Purvis RJ, Beck WR. US Patent 2,789,063, assigned to Minnesota Mining and Manufacturing Co. (Apr. 16, 1957).
181. British Patent 765,284, assigned to Minnesota Mining and Manufacturing Co. (Jan. 1957).
182. ® Technical Service Notes F9, Finishing Processes, Imperial Chemical Industries, Ltd.
183. J.A. Marchesi., K. Ha., A. Garton., G.S. Swei., K.W. Kristal Adhesion to sodium naphthalenide treated fluoropolymers. Part II. Effects of treatment conditions and fluoropolymer Structure J Adhes 36 1991 55-69.
184. S. Wu Polymer interface and adhesion 1982 Marcel Dekker, Inc. New York.
185. L.M. Siperko., R.R. Thomas Chemical and physical modification of fluoropolymer surfaces for adhesion enhancement: a review J Adhes Sci Tech 3 3 1989 157-173.
186. ® to promote bondability J Appl Polym Sci VI 20 1962 221-225.
187. R.R. Rye., G.W. Arnold Depth dependence of alkali etching of polytetrafluoroethylene: effect of X-ray radiation Langmuir 5 1989 1331-1334.
188. W.A. Zissman Influence of constitution of adhesion I. Skeist. Handbook of adhesives 2nd ed. 1977 Van Nostrand Reinhold New York.
189. A.N. Gent., G.R. Hamed Fundamentals of adhesion I. Skeist. Handbook of adhesives 3rd ed. 1990 Van Nostrand Reinhold New York.
190. Diversified Enterprises, 101 Mulberry St., Suite 2N, Claremont, NH 03743, (603) 543-0038 or 1-800-833-4644; fax (603) 543-1334; 2004.
191. W.C. Tanner Manufacturing processes with adhesive bonding, pp. 1-21, in Applied Polymer Symposia No. 19 M.J. Bodnar. Processing for adhesives bonded structures 1972 Interscience Publishers New York.
192. R.F. Wegman., et al. Effects of Varying processing parameters in the fabrication of adhesion bonded structures. Part 2, Important considerations for the bonding process, Picatinny Arsonal technical report 3999 1970 Picatinny Arsonal Dover, NJ.
193. Katz M, Schmidt FH. EP0467096A1, assigned to DuPont Co. (Jan. 22, 1992).
194. I. Mathieson., D.M. Brewis., I. Sutherland., R.A. Cayless J Adhes 46 1994 49.
195. Brewis DM. Surface Modification of Fluoropolymers for Adhesion, paper presented at the Fluoropolymers Conf. UK: Loughborough University; 1992.
196. Review of Current Trends in Surface Pretreatment prior to Structural Adhesive Bonding, John Bishopp Star Adhesion Limited, Waterbeach Cambridge, at NPL, Teddington, Middlesex November 20, 2003.
197. R.C. Snogren Handbook on surface preparation 1974 Palmerton Publishing Co. New York.
198. B. Arkles Commercial applications of sol-gel-derived hybrid materials MRS Bulletin 2001 402.
199. Osborne JH. Nonchromate conversion coatings in use at boeing, Boeing Phantom Works - Seattle, ; 2006.
200. D. Arnott., A. Rider., J. Mazza Surface treatment and repair bonding A.A. Baker., L.R.F. Rose. R. Jones Advances in the bonded composite repairs of metallic aircraft structure 2002 Elsevier.
201. Fiebig JW, Mazza JJ, McKray DB. An ALC consideration of simple solgel preparations for improved durability of field and depot-level bonded repairs. In: Proceedings of the aging aircraft conference. Galaxy Scientific; 2002.
202. A&M Environmental Technical Notes, Volume 4, Number 3, Boeing Company, August 1999.
203. American Society for Testing and Materials (ASTM) ASTM 3933-98, Standard Recommended Practice for Preparation of Metal Surfaces for Adhesive Bonding vol. 15.06 2001 Annual Book of ASTM Standards.
204. Nacconol 90G, available from the Stephan Co., Northfield, IL 60093.
205. Tim Meara. New Honing Options for Hypereutectic Aluminum Cylinder Bores, Modern Machine Shop, Sep 18, 2008, .
206. G.D. Davis., J.D. Venables Surface treatment of metal adherends M. Chaudhury., A.V. Pocius Adhesion Science and Engineering - vol. 2: Surfaces, Chemistry and Applications 2002 Elsevier 947-1008.
207. Stepan Chemical Co., Northfield, IL, .
208. Russell WJ, Garnis EA. Chromate-free method of preparing aluminum surfaces for adhesive bonding: an etchant composition of low toxicity, U.S. Army Armament Research and Development Command, Large Caliber Weapon Systems Laboratory, Technical Report ARLCD-TR-78001, ARRADCOM, Dover, New Jersey (May 1978).
209. W.J. Russell Chromate-free process for preparing aluminum for adhesive bonding M.J. Bodnar. J. Appl. Polym. Sci. Applied Polymer Symposia No. 32 1977 Interscience Publishers pp. 105-17.
210. Wegman RF, et al. The function of the P2 Etch in treating aluminum alloys for adhesive bonding, preprint book. 29th National SAMPE Symposium, vol. 29, Reno, Nevada (April 3-5, 1984). pp. 273-81.
211. Rogers NL, Russell W. Evaluation of Nonchromated Etch for Aluminum Alloys (P2-Etch), U.S. Army Armament Research and Development Command, Large Caliber Weapon Systems Laboratory, Contractor Report (Bell Helicopter Textron), ARLCD-CR-80008, ARRADCOM, Dover, New Jersey (April 1980).
212. Great Britain Patent, GB290903, assigned to Charles Hugh Roberts Gower, Stafford O Brien And Partners, May 24, 1928.
213. American Anodizing Council, ; 2013.
214. ; 2013.
215. G.D. Davis., J.D. Venables M. Chaudhury., A.V. Pocius Chapter 21 - Surface Treatments of Metal Adherends in Adhesion Science and Engineering vol. 1 2002 Elsevier.
216. American Society for Testing and Materials (ASTM), ASTM D3922-89 (1993). Standard Recommended Practice for Preparation of Aluminum Surfaces for Structural Adhesives Bonding, (Phosphoric Acid Anodizing), vol. 15.06, Annual Book of ASTM Standards; 1993.
217. D.M. Brewis J. Kinloch. Aluminum adherends, durability of structural adhesives 1983 Applied Science Publishers London and New York.
218. F.J. Boerio., G.D. Davis., J.E. deVries., C.E. Miller., K.L. Mittal., R.L. Opila., et al. Current status, research needs, surface treatment of metal adherends 1003 and opportunities A.W. Czanderna., A.R. Landgrebe Applications of surface processing to transportation and utilities technologies 1992 National Renewable Energy Laboratory Golden, CO pp. 23-1; and Crit. Rev. Surf Chem. 3: 81; 1993.
219. Geiss PL, Gramsch-Kempkes S. Mechanical Adhesion in Adhesively Bonded Metal-Joints with Retentive Laser-Structured Adherends, 36th Annual Meeting of the Adhesion Society, 3-6 Mar 2013, Daytona Beach, FL (USA).
220. R. Broad., J. French., J. Sauer New effective, ecological surface pretreatment for highly durable adhesively bonded metal joints Int J Adhes Adhes 19 1999 2-3.
221. J. Bishopp Handbook of adhesives and sealants vol. 1 2005 Elsevier pp. 163-214.
222. J. Shields Adhesives handbook 2nd ed. 1976 Newnes-Butterworth London (The 3rd Edition was published by Butterworths, London, in 1984.).
223. N.L. Rogers Surface preparation of metals for adhesive bonding M.J. Bodnar. Applied Polymer Symposia No. 3, structural adhesives bonding 1966 Interscience Publishers 327-340.
224. W.H. Guttman Concise guide to structural adhesives 1961 Reinhold New York.
225. C.V. Cagle Surface preparation for bonding beryllium and other adherends C.V. Cagle. Handbook of adhesive bonding 1973 McGraw-Hill New York.
226. Phoenix Brands, August, 2013.
227. American Society for Metals (ASM) Metals handbookSurface engineering nonferrous metals vol. V 1994 ASM International.
228. Military Specification, MIL-M-45202C, Anodic Treatment of Magnesium Alloy (April 1, 1981).
229. Military Specification, MIL-M-3171C (superseded by SAE-AMS-M-3171, May 1998), Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion (March 14, 1974).
230. Heating and pickling huntington alloys, Huntington Alloy Products Division, The International Nickel Co., Inc., Huntington, WV; 1968.
231. CHEMLOK adhesives, A Guide to Handling and Application, Application Guide, published by LORD Corp.; 1999.
232. Keith RE, et al. Adhesive Bonding of Nickel and Nickel-Base Alloys, NASA TMX-53428 (Oct. 1965).
233. E.M. Petrie Plastics and elastomers as adhesives C.A. Harper. Handbook of plastics, elastomers and composites 4th ed. 2002 McGraw-Hill New York.
234. Landrock AH. Processing handbook on surface preparation for adhesive bonding, Picatinny Arsenal Technical Report 4883. Dover, NJ: Picatinny Arsenal (Dec. 1975).
235. Devine AT. Adhesive bonded steel: bond durability as related to selected surface treatments, U.S. Army Armament Research and Development Command, Large Caliber Weapon Systems Laboratory, Technical Report ARLCD-TR-77027 (Dec. 1977).
236. W. Brockmann J. Kinloch. Steel adherends, durability of structural adhesives 1983 Applied Science Publishers.
237. N.J. DeLollis Adhesives, adherends adhesion 1980 Robert E. Krieger Publishing Co. Huntington, NY (This book is the 2nd edition of a 1970 publication under the name Adhesives for Metals: Theory and Technology).
238. H.N. Vazirani Surface preparation of steel for adhesive bonding J Adhes 1 1969 222-232.
239. Keith RE, et al. Adhesive Bonding of Stainless Including Precipitation Hardening Stainless, NASA TMX-53574 (April 1968). (Available from NTIS as AD 653 526.)
240. Slota SA, Wegman RF. Durability of Adhesive Bonds to Various Adherends, Picatinny Arsenal Technical Report 4917 (June 1976).
241. Atkins RW, et al. Explosives Research and Development Establishment, Ministry of Defence (UK), Waltham Abbey, Essex, England. An Investigation into the Influence of Surface Pre-Treatment by Particle Impact on the Strength of Adhesive Joints Between Like Steel Surfaces, ERDE-TR-120, January 1973. (Available from NTIS as AD 771 003.)
242. Wegman RF, et al. Evaluation of the Adhesive Bonding Processes Used in Helicopter, Manufacture, Part I. Durability of Adhesive Bonds Obtained as a Result of Processes Used in the UH-1 Helicopter. Picatinny Arsenal Technical Report 4186, Dover, NJ: Picatinny Arsenal (Sept. 1971).
243. Military Specification, MIL-A-9067C(1). Adhesive Bonding, Process and Inspection Requirements for Naval Air Systems Command (Feb 23, 1979). (This specification was cancelled for Air Force use by Notice 1, dated 9 December 1974.).
244. A. Mahoon A.J. Kinloch. Titanium adherends, durability of structural adhesives 1983 Applied Science Publishers London and New York.
245. Hohman AE, Lively GW. Surface Treatment of Titanium and Titanium Alloys, U.S. Patent 3,891,456 filed (Oct. 17, 1973).
246. R.D. Beemer Introduction to weld bonding SAMPE Q 5 1973 37-41.
247. J.A. Kizer., J.J. Grosko Development of the weldbond joining process for aircraft structures M.J. Bodnar. Applied Polymer Symposia No. 19, processing for adhesives bonded structures 1972 Interscience Publishers NY 353-370.
248. Bowen BB, et al. Improved Surface Treatments for Weldbonding Aluminum, AFML-TR-159 (Oct. 1976).
249. Wu KC, Bowen BB. Advanced aluminum weldbonding manufacturing methods, Preprint Book. 22nd National SAMPE Symposium, 22:536-54, San Diego, CA (April 16-28, 1977).
250. Mahon J, et al. Manufacturing Methods for Resistance Spotweld-Adhesive Bond Joining of Titanium, AFML-TR-76-21 (March 1976).
251. Bergdahl Associates, Inc., ; August 2013.
252. Lively GW, Hohman AE. Development of a mechanical-chemical surface treatment for titanium alloys for adhesive bonding, proceedings, 5th National SAMPE Technical Conference, Kiamesha Lake, NY (Oct. 9-11, 1973). pp. 145-55.
253. E.M. Petrie Plastics and elastomers as adhesives C.A. Harper. Handbook of plastics and elastomers 1975 McGraw-Hill New York.
254. Ross MC, et al. Effects of varying processing parameters on the fabrication of adhesives-bonded structure, part X, adhesive bonding structural plastics. Picatinny Arsenal technical report 4318; July 1972.
255. D.R. Smith How to prepare the surface of metals and non-metals for adhesive bonding Adhes Age 10 3 1967 25-31.
256. U.S. Patent 3,235,426, W.M. Bruner, assigned to DuPont Company (Feb 15, 1966).
257. Delrin® Design Information, Module II, No. L-10464, published by DuPont Co. (March 2002).
258. M.J. Bodnar., W.J. Powers Adhesive bonding of the never plastics Plast Technol 4 8 1958 721-725.
259. R.F. Wegman Adhesive bonding of silicone rubber to kralastic for the launcher. Picatinny Arsenal technical memorandum 1865 1969 Picatinny Arsenal Dover, NJ.
260. R.C. Snogren Handbook on surface preparation 1974 Palmerton Publishing Co. New York.
261. J. Shields Adhesives handbook 3rd ed. 1984 Newness-Butterworth London.
262. A.H. Landrock Processing handbook on surface preparation for adhesive bonding, Picatinny Arsenal technical report 4883 1975 Picatinny Arsenal Dover, NJ.
263. G. Salomon R. Houwink., G. Salomon Introduction, adhesion and adhesives, vol. 2: applications 2nd ed. 1967 Elsevier Publishing Co..
264. S. Ebnesajjad Fluoroplastics, vol. 2: melt processible fluoropolymers 2002 William Andrew Inc. Norwich, NY.
265. M.C. Ross., et al. Effects of varying processing parameters in the fabrication of adhesive-bonded structures, part X. Adhesive bonding of structural plastics, Picatinny Arsenal technical report 4318 1972 Picatinny Arsenal Dover, NJ.
266. C.V. Cagle Bonding plastic materials C.V. Cagle. Handbook of adhesive bonding 1973 McGraw-Hill NY.
267. V. Abolins., J. Euckert Adhesive bonding and solvent cementing of polyphenylene oxide Adhes Age 10 7 1967 22-27.
268. , Reinhard D. Adhesive bonding of Noryl resins, Noryl processing guide, NPG 12, undated. Selkirk, NY: General Electric Co., Plastics Department.
269. A.H. Landrock Effects of varying processing parameters in the fabrication of adhesive-bonded structures, part XVIII. Adhesive bonding and related joining methods for structural plastics-literature survey, Picatinny Arsenal technical report 4424 1972 Picatinny Arsenal Dover, NJ.
270. A.T. Devine., et al. Bonding Lexan polycarbonate to silicone rubber for gas masks, Picatinny Arsenal technical report 3930 1970 Picatinny Arsenal Dover, NJ.
271. General Electric Co., Plastics Department, Pittsfield, MA. Lexan Polycarbonate Resin Design, Brochure CDC 536; undated.
272. S. Ebnesajjad Fluoroplastics, vol. 1: non-melt processible fluoroplastics 2000 William Andrew Inc. Norwich, NY.
273. General Electric Co., Plastics Department, Pittsfield, MA. Valox Thermoplastic Polyester, Brochure, VAL-5A; undated.
274. Ticona Corp., Florence, KY. Celanex® thermoplastic polyester-properties and processing, ; 2005.
275. Mr. Donald Croft, General Electric Co., Products Section, Pittsfield, MA (3 January 1975).
276. R. Paul Rich Personal communication 1972 Eastman Chemical Products, Inc..
277. ; June 2013.
278. ICI Petrochemicals and Plastics Division. PEEK aromatic polymer, provisional data sheet PK 11, adhesive bonding; 1979.
279. Victrex PES aromatic polymer-data for design-unfilled grades, technical service note VX101. 3rd ed. 1978.
280. Victrex PES aromatic polymer-adhesive for use with Victrex polyethersulfone, No. VX TS 1.78; August 1978.
281. Ohi H, Mitsui Petrochemical Industries, Ltd., Tokyo, Japan. TPX® Polymethylpentene. Modern plastics encyclopedia. New York: McGraw-Hill; 1995.
282. M.D. Anderson., M.J. Bodnar Surface preparation of plastics for adhesive bonding Adhes Age 7 11 1964 26-32.
283. Ross MC. Preliminary study of adhesive bonding of newer structural plastics, Picatinny Arsenal technical memorandum 2204; April 1976.
284. VESPEL® S Line Design Handbook, Rep No. H-53668, DuPont Engineering Polymers, Geneva, Switzerland; May 2002.
285. Properties of DuPont VESPEL® Parts, Rep No. H15724-1, DuPont Engineering Polymers, Geneva, Switzerland; Aug 1993.
286. R.J. Trimineur Silicone, modern plastics encyclopedia 1995 McGraw-Hill New York.
287. C.V. Cagle Handbook of adhesive bonding 1973 McGraw-Hill New York.
288. B.P. Spearman., J.D. Hutchinson Post vulcanization bonding techniques Adhes Age 7 4 1974 30-33.
289. L.H. Sharpe Adhesive bonding, fastening and joining reference issue Mach Des 14 21 1969 119-120.
290. R.T. McIntyre., et al. Effect of varying processing parameters in the fabrication of adhesive bonded structures, part VI, production methods, Picatinny Arsenal technical report 4162 1971 Picatinny Arsenal Dover, NJ.
291. C.A. Westerdahl., et al. Activated gas plasma surface treatment of polymers for adhesive bonding-part III, Picatinny Arsenal technical report 4279 1972 Picatinny Arsenal Dover, NJ.
292. J.R. Hall., et al. Activated gas plasma surface treatment of polymers for adhesive bonding J Appl Polym Sci 13 1969 2085-2096.
293. International Plasma Corporation (IPC), Product Bulletin 2402.
294. N.J. DeLollis., O. Montoya Bondability of RTF silicone rubber J Adhes 3 1 1967 57-67.
295. J.E. Gaughan Bonding elastomeric compounds C.V. Cagle. Handbook of adhesive bonding 1973 McGraw-Hill New York.
296. W.H. Guttman Concise guide to structural adhesives 1961 Reinhold New York.
297. Various Hughson Chemicals (Division of LORD Corporation, Erie, PA) publications, 1972 and 1974 on Chemlok® primers and adhesives.
298. Snogren RC. Selecting surface preparation processes for adhesive bonding, sealing and coating. Paper presented at Design Engineering Conference and Show, American Society of Mechanical Engineers, held at Chicago, IL, April 22-25, 1968. Paper 68-DE-45. Also published as Selection of Surface Preparation Processes, Parts 1 and 2, Adhesives Age, 7 and 8; July and August 1969.
299. H.N. Vazirani Surface preparation of steel for adhesive bonding J Adhes 1 1969 222-232.
300. Secondary Operations Guide, Assembly and Finishing of Engineering Plastics, DSM Engineering Plastics Corp, The Netherlands, 2006.
301. R.C. Snogren Handbook on surface preparation 1974 Palmerton Publishing Co New York.
302. E.M. Liston Plasma treatment for improved bonding: a review J Adhes 30 1989 199-218.
303. In-line plasma treatment of plastics. Adapted version from the German original: GAK, Dr. Gupta Verlag, Postfach 10 41 25, 40852 Ratingen, November Issue; 2008.
304. T.S. Cheng., H.T. Lin., M.J. Chuang Surface fluorination of polyethylene terephthalate films with RF plasma Mater Lett 58 2004 650-653.
305. Plasma physics. Dr. Philip D. Rack, Professor, Department of Material Science and Engineering, University of Tennessee, Knoxville, Tennessee, USA, ; 2013.
306. U. Kogelschatz Dielectric-barrier discharges: their history, discharge physics, and industrial applications Plasma Chem Plasma Process 23 1 2003.
307. O.S. Kolluri Application of plasma technology for improved adhesion of materials A. Pizzi., K.L. Mittal Handbook of adhesive technology 2nd ed. 2003 Marcel Dekker, Taylor & Francis.
308. C.M. Chan., T.M. Ko., H. Hiraoka Surf Sci Rep 24 1996 1-54.
309. Diener Electronic, , Ebhausen, Germany; 2013.
310. Henniker Plasma, , Warrington, UK; 2013.
311. Acton Technologies, ; 2013.
312. Plasma Technology, pub in 2007 by Diener Electronic, .
313. H.K. Yasuda., Y.S. Yeh., S. Fusselman Pure Appl Chem 63 1990 1689.
314. R. d’Agostino., F. Cramarossa., F. Fracassi R. d’Agostino. Plasma deposition, treatment, and etching of polymers 1990 Academic Press New York 95-162.
315. C.M. Chan Polymer surface modification and characterization 1994 Hanser New York.
316. 2 plasma treatment Eur Polym J 42 2006 1558-1568.
317. W.J. Brennan., W.J. Feast., H.S. Munro., S.A. Walker Polymer 32 1991 1527.
318. M. Morra., E. Occhiello., F. Garbassi J Coll Interf Sci 132 1989 504.
319. M. Schonhorn., R.H. Hansen A new technique for preparing low surface energy polymers for adhesive bonding, polymer letters J Polym Sci B 4 1966 203-209.
320. W.A. Dukes., A.J. Kinloch Preparing low-energy surfaces for bonding W.C. Wake. Developments in adhesives vol. 1 1977 Applied Science Publishers London.
321. E.M. Petrie Plastics and elastomers as adhesives ISBN:0070266867 C.A. Harper. Handbook of plastics, elastomers and composites 4th ed. 2002 McGraw-Hill New York.
322. Taylor W. Technical synopsis of plasma surface treatments, advisor: Dr. B. Welt, University of Florida, Gainesville, Florida, USA, , December, 2009.
323. Diener Electronic, .
324. J.R. Hall., et al. Activated gas plasma surface treatment of polymers for adhesive bonding J Appl Polym Sci 13 1969 2085-2096.
325. Wegman RF, et al. Effects of varying processing parameters in the fabrication of adhesive-bonded structures-part 2, Important considerations for the bonding process, Picatinny Arsenal technical report 3999. Dover, NJ: Picatinny Arsenal; 1970.
326. F.D. Egitto., L.J. Matienzo IBM J Res Deû 38 1994 423.
327. M.R. Wertheimer., L. Martinu., J.E. Klemberg-Sapieha Plasma treatment of polymers to improve adhesion K.L. Mittal., A. Pizzi Adhesion promotion techniques: technological application 1999 Marcel Dekker New York, Basel 191-204.
328. O.D. Greenwood., R.D. Boyd., J. Hopkins., J.P.S. Badyal J Adhes Sci Technol 9 1995 311.
329. W. Petasch., E. Rauchle., M. Walker., P. Eisner Improvement of the adhesion of low-energy polymers by a short-time plasma treatment Surf Coat Technol 74-75 1995 682-688.
330. R.L. Williams., D.J. Wilson., N.P. Rhodes Stability of plasma-treated silicone rubber and its influence on the interfacial aspects of blood compatibility Biomaterials 25 2004 4659-4673.
331. R. Sanchis., O. Fenollar., D. Garcia., L. Sanchez., R. Balart Improved adhesion of LDPE films to polyolefin foams for automotive industry using low-pressure plasma Int J Adhes Adhes 28 2008 445-451.
332. Source of data: gasonics/IPC applications notes. San Jose, California: Gasonics International.
333. Tetra-Etch® by WL Gore & Associates, Inc, .
334. Holdsworth GS, Dalgleish A. Plasma advancement expands applications of fluoropolymer linings and coatings in the battle against corrosion. COMPOSITES 2001 Convention and Trade Show Composites Fabricators Association, Tampa, FL; 2001.
335. Hansen GP, et al. Achieving optimum bond strength with plasma treatment, presented at the Soc. of Mfg. Eng. Adhesives Conference, paper No. AD89-537, Sep. 12-14, 1989.
336. E. Occhiello., M. Mora., G. Morini., F. Garbassi., D. Johnson On oxygen plasma-treated polypropylene interfaces with air, water and epoxy resins: II epoxy resins J Appl Polym Sci 42 7 1991 2045-2052 10.1002/app.1991.0704 20732.
337. Kusano Y, et al. US Patent 5,425,832, assigned to Bridgestone Corp., Jun. 20, 1995.
338. H.J. Da Youxian., A.W.-H. Griesser Mau., R. Schmidt Surface modification of poly(tetrafluoroethylene) by gas plasma treatment Polymer 32 6 1991 1126-1130.
339. 2 as process gas Eur Polym J 35 1999 1149-1152.
340. J.C Caro., U. Lappan., D. Pleul., K. Lunkwitz Insertion of sulfur-containing functional groups into polytetrafluoroethylene (PTFE) by low pressure plasma treatment Surf Coat Technol 116-119 1999 792-795.
341. K.-M. Baumgartner., J. Schneider., A. Schulz., J. Feichtinger., M. Walker Short-time plasma pre-treatment of polytetrafluoroethylene for improved adhesion Surf Coat Technol 142-144 2001 501-506.
342. M.C. Coen., R. Lehmann., P. Groening., L. Schlapbach Modification of the micro- and nanotopography of several polymers by plasma treatments Appl Surf Sci 207 2003 276-286.
343. 2O/Ar mixture at low pressure Mater Chem Phys 80 2003 278-282.
344. Q. Chen Investigation of corona charge stability mechanisms in polytetrafluoroethylene (PTFE) Teflon® films after plasma treatment J Electrostat 59 2003 3-13.
345. C.-Y. Tu., Y.-C. Wang., C.-L. Li., K.-R. Lee., J. Huang., J.-Y. Lai Expanded poly(tetrafluoroethylene) membrane surface modification using acetylene/nitrogen plasma treatment Eur Polym J 41 2005 2343-2353.
346. C.-Y. Tua., Y.-L. Liua., K.-R. Lee., J.-Y. Lai Surface grafting polymerization and modification on poly(tetrafluoroethylene) films by means of ozone treatment Polymer 46 2005 6976-6985.
347. H.-X. Sun., L. Zhang., H. Chai., H.-L. Chen Surface modification of poly(tetrafluoroethylene) films via plasma treatment and graft copolymerization of acrylic acid Desalination 192 2006 271-279.
348. C. Wang., J.-R. Chen Studies on surface graft polymerization of acrylic acid onto PTFE film by remote argon plasma initiation Appl Surf Sci 253 2007 4599-4606.
349. T. Shi., M. Shao., H. Zhang., Q. Yang., X. Shen Surface modification of porous poly(tetrafluoroethylene) film via cold plasma treatment Appl Surf Sci 258 2011 1474-1479.
350. Z. Kolská., A. Reznícková., V. Hnatowicz., V. Svorcík PTFE surface modification by Ar plasma and its characterization Vacuum 86 2012 643-647.
351. Murokh I. Atmospheric plasma surface treatment technique. El Segundo, CA: Tri-Star Technologies, ; 2005..
352. C. Tendero., C. Tixier., P. Tristant., J. Desmaison., P. Leprince Atmospheric pressure plasmas: a review Spectrochim Acta B 61 2006 2-30.
353. A.A. Bujanda., V. Rodriguez-Santiago., C.C. Ho., B.E. Stein., R.E. Jensen., D.D. Pappas Atmospheric plasma treatment of polymer films and alumina ceramics for enhanced adhesive 2008 United States Army Research Laboratory.
354. Murokh IY, Kerner AA. US patent No.5,798,146, assigned to Tri-Star Technologies Corp., Aug 25, 1998.
355. Wolf R. Atmospheric surface modification of polymers for biomedical device adhesion. Enercon Industries, ; 2003.
356. M. Kogoma., H. Nakamura., H. Jinno., S. Okazakim Efect of atmospheric pressure glow plasma on adhesive bond strength of plastics 1992 Faculty of Science and Technology, Sophia University.
357. US Patent No. 5,124,173, H. Uchiyama, S. Okazaki, M. Kogoma, assigned to E. C. Chemical Co. et al., June 23, 1992.
358. K. Tanaka., T. Inomata., M. Kogoma Improvement in adhesive strength of fluorinated polymer films by atmospheric pressure glow plasma Thin Solid Films 386 2001 217-221.
359. A. Villermeta., P. Cocoliosa., G. Rames-Langlade., F. Coeuret., J.L. Gelot., E. Prinz., et al. ALDYNE®: surface treatment by atmospheric plasma for plastic films converting industry Surf Coat Technol 174-175 2003 899-901.
360. Sparavigna AC. Plasma treatment advantages for textiles, Cornell University Library, arXiv:0801.3727v1 [physics.pop-ph], pp. 1-16, ; 2008.
361. Wolf R. Atmospheric plasma: the new functional treatment for nonwovens. Proceedings of TAPPI PLACE, Conference, Boston; 2002.
362. S. Jinka., R. Behrens., C. Korzeniewski., V. Singh., A.I. Arunachalam., S. Parameswaran., et al. Atmospheric pressure plasma treatment and breathability of polypropylene nonwoven fabric J Ind Textil 42 4 2013 501-514.
363. K.H. Kale., A.N. Desai Atmospheric pressure plasma surface treatment of textiles using non-polymerizing gases Indian J Fibre Text Res 36 2011 289-299.
364. Okubo M, Tahara M, Abratani Y, Kurki T, Hibino T. Preparation of PTFE film with adhesive surface treated by atmospheric-pressure nonthermal plasma graft polymerization. In: Proceedings Electrostatics Joint Conference - Session 11: Non-thermal Plasma, Boston University, June 16-18, 2009.
365. I. Murokh In-line plasma treatment of wire insulation materials 2005 Tri-Star Technologies El Segundo, CA.
366. Wolf RA. High performance wire & cable jacketing materials. Enercon Industries Corporation, ; 2013.
367. H. Yasuda., M. Gazicki Biomedical applications of plasma polymerization and plasma treatment of polymer surfaces Biomaterials 3 1982 68-77.
368. P.K. Chua., J.Y. Chena., L.P. Wang., N. Huang Plasma-surface modification of biomaterials Mater Sci Eng R 36 2002 143-206.
369. P. Favia., R. d’Agostino Plasma treatments and plasma deposition of polymers for biomedical applications Surf Coat Technol 98 1998 1102-1106.
370. J. Yang., J. Bei., S. Wang Enhanced cell affinity of poly (D, L-lactide) by combining plasma treatment with collagen anchorage Biomaterials 23 2002 2607-2614.
371. D.J. Wilson., N.P. Rhodes., R.L. Williams Surface modification of a segmented polyetherurethane using a low-powered gas plasma and its influence on the activation of the coagulation system Biomaterials 24 2003 5069-5081.
372. Y. Wan., X. Qu., J. Lu., C. Zhu., L. Wan., J. Yanga., et al. Characterization of surface property of poly(lactide-co-glycolide) after oxygen plasma treatmen0t Biomaterials 25 2004 4777-4783.
373. Y. Wan., C. Tu., J. Yang., J. Bei., S. Wang Influences of ammonia plasma treatment on modifying depth and degradation of poly(L-lactide) scaffolds Biomaterials 27 2006 2699-2704.
374. C. Ozcan., N. Hasirci Plasma modification of PMMA films: surface free energy and cell attachment studies J Biomater Sci Polym Ed 18 6 2007 759-773.
375. M.T. Khorasani., H. Mirzadeh., S. Irani Plasma surface modification of poly (L-lactic acid) and poly (lactic-co-glycolic acid) films for improvement of nerve cells adhesion Radiat Phys Chem 77 2008 280-287.
376. Bax DV, Wang Y, Li Z, Maitz PKM, McKenzie DR, Bilek MMM, et al. Binding of the cell adhesive protein tropoelastin to PTFE through plasma immersion ion implantation treatment. Biomaterials 2011;32(22):5100-11.
377. J.H. Schut Plasma treatment: the better bond Plast Technol 64 1992 64-69.
378. Q. Zhao., Y. Liu., E.W. Abe Effect of Cu content in electroless Ni-Cu-P-PTFE composite coatings on their anti-corrosion properties Mater Chem Phys 87 2004 332-335.
379. J. Murphy Additives for plastics handbook 2001 Elsevier B.V..
380. Sabreen SR. “Smart additives” enhance plastics laser marking, by PennWell Corporation, Industrial Laser Solutions; January/February 2012.
381. Han A. Analysis of the laser marking, nonconventional technologies review - no. 4, ; 2008.
382. Laser marking on plastic materials. Rofin Baasel, Inc, ; June 2013.
383. Additives for surface and substrate. Munzing, ; 2012.
384. Silicones and silanes in the plastics industry, Pub No. 5778e, Wacker Chemie AG, ; May 2006.
385. Owen MJ. Chemtech. 1981 11, 288, an updated version of this article can be found in Chimie Nouvelle 2004; 85: 27.
386. Andriot M, et al. Silicones in industrial applications. In: De Jaeger R, Gleria M, editors. Inorganic polymers. Nova Pub; 2007. pp. 61-161.
387. J.F. Archard Contact and rubbing of flat surfaces J Appl Phys 24 1953 981-988.
388. T. Reye Zur theorie der zapfengreibund Der Civilingenieur 4 1860 235-255.
389. Molybdenum-Sulfur Compounds in Lubrication. International Molybdenum Association, ; 2013.
390. S. Ebnesajjad., R.A. Morgan Fluoropolymer additives, Plastics Design Library 2012 Elsevier.
391. S. Ebnesajjad Fluoroplastics, Non-melt processible fluoropolymers, the definitive user’s guide and databook, Plastics Design Library vol. 1 2000 Elsevier.
392. Bartholomew E. Acrylic pressure sensitive adhesives exhibiting enhanced adhesion to low surface energy substrates. Avery Dennison Performance Adhesive Center, pub. by Pressure Sensitive Tape Council, ; 2013.
393. Okubo M, Tahara M, Abratani Y, Kuroki T, Hibino T. Preparation of PTFE film with adhesive surface treated by atmospheric-pressure nonthermal plasma graft polymerization. In: Proceedings Electrostatics Joint Conference, session 11, Nonthermal Plasma; 2009.
394. W.B. White Basic science of advanced ceramics S. Somiya., et al. Handbook of advanced ceramics 2003 Elsevier.
395. S. Somiya., et al. Handbook of advanced ceramics 2003 Elsevier.
396. D.A. Taylor Advanced ceramics Mater Australia 33 1 2001 20-22.
397. ; 2003.
398. G.A. Borges., A.M. Sophr., M.F. De Goes., L.C. Sobrinho., D.C.N. Chan Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics J Prosthet Dent 89 2003 479-488.
399. J.W. Mclean., T.H. Hughes The reinforcement of dental porcelain with ceramic oxides Br Dent J 119 1965 251-267.
400. C.J. Soares., P.V. Soares., J.C. Pereira., R.B. Fonseca Surface treatment protocols in the cementation process of ceramic and laboratory-processed composite restorations: a literature review J Esthet Restor Dent 17 2005 224-235.
401. C.B. Carter., M.G. Norton Ceramic materials: science and engineering 2007 Springer.
402. A.S. Wagh Chemically bonded phosphate ceramics - twenty-first century materials with diverse applications 2004 Elsevier.
403. Ebnesajjad S. Fluoroplastics, vol. 1. Non-melt processible fluoroplastics. Plastics Design Library. Oxford, UK: Elsevier; 2000.
404. D.J. Duval., S.H. Risbud., J.F. Shackelford Mullite J.F. Shackelford., R.H. Doremus. Ceramic and glass materials:structure, properties and processing 2008 Springer.
405. Encyclopedia Britannica, , June 2013.
406. W. Roy Rice. Ceramic fabrication technology 1st ed. 2002 CRC Press.
407. ; 2008.
408. J.W. Thurmond., W.W. Barkmeier., T.M. Wilwerding Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain J Prosthet Dent 72 1994 355-359.
409. Technical Manual, Blastite® BT (virgin aluminum oxide), pub by Washington Mills, ; 2013.
410. CTI REPORT 80-2-2 (R-85). Methods and equipment for the preparation of horizontal concrete slabs for bonding ceramic tile, CTI REPORT 80-2-2 (R-85). Ceramic Tile Institute of America, Inc; 2013.
411. H. Kato., H. Matsumura., M. Atsuta Effect of etching and sandblasting on bond strength to sintered porcelain of unfilled resin J Oral Rehabil 27 2000 103-110.
412. Z. Sun., D. Pan., J. Wei., C.K. Wong Ceramics bonding using solder glass frit J Electron Mater 33 12 2004 1516-1523.
413. A.A. El Zohairy., A.J. De Gee., F.M. Hassan., A.J. Feilzer Dent Mater 20 2004 778-787.
414. Powers JM, Farah JW, O’Keefe KL, Kolb B, Udrys G. Guide to all-ceramic bonding, sponsored by Kuraray America, Inc, ; 2011.
415. Silane Coupling Agents, pub. by Shin-Etsu Silicone, ; 2012.
416. P.G. Pape Adhesion promoters S. Ebnesajjad. Handbook of adhesives and surface preparation 2011 Elsevier Oxford, UK.
417. Lung CY, Matinlinna JP. Aspects of silane coupling agents and surface conditioning in dentistry: an overview. Dent Mater, Elsevier; 2012;28:467-77.
418. Doucet S, Picard B, Tavernier B. Effect of different ceramic surface treatments on one-step micro indentation bond strength. Eur Cells Mater 2005;10 (Suppl. 4), pub. by AO Research Institute Davos, .
419. X.M. Zhang., T.M. Yue., H.C. Man Enhancement of ceramic-to-metal adhesive bonding by excimer laser surface treatment Mater Lett 30 1997 327-332.
420. Miyamoto, MH. SPIE 1279, 66; 1990.
421. Henari, BW. Appl Opt 1995;34:581.
422. Man HC, Zhang XM, Yue TM. Proceedings of ICALE0' 95, San Diego, USA; 1995, p. 704.
423. M.T. Yucel., F. Aykent., S. Akman., I. Yondem Effect of surface treatment methods on the shear bond strength between resin cement and all-ceramic core materials J Non Cryst Solids 358 2012 925-930.
424. Janda R, Roulet J-F, Wulf M, Tiller H-J. A new adhesive technology for all-ceramics. Dent Mater 2003;19:567-73.
425. RLS Enterprises, New Brunswick, New Jersey, USA, , July 2013.
426. Nord RS. Kulzer’s silicoater: a new technique for bonding methacrylates to metal. Trends Tech Contemp Dent Lab 1986;3:32-4. (See also pp. 36-4, 42-6.).
427. Coortek, , June 2013.
428. Joining dissimilar materials pub by S-Bond Technologies Corp, , April 5, 2011.
429. E.P. Plueddemann Silane coupling agents 2nd ed. 1991 Plenum Press New York, NY.
430. P.G. Pape., E.P. Plueddemann History of silane coupling agents in polymer composites R.B. Seymour., R.B. Deanin History of polymeric composites 1987 VSP Utrecht, the Netherlands 105-139.
431. H. Ishida., J.L. Koenig Molecular orientation of the coupling agent interphase of fiberglass reinforced plastics J Polym Sci-Phys 17 1979 1807.
432. F.D. Osterholtz., E.R. Pohl Kinetics of the hydrolysis and condensation of organofunctional alkoxysilanes: a review K.L. Mittal. Silanes and other coupling agents 1992 VSP Utrecht, the Netherlands 119-141.
433. M.K. Chaudhaury., T.M. Gentle., E.P. Plueddemann Study of adhesion through interdiffusion and IPN formation in the interphase region of composites J Adhes Sci Techol 1 1987 29-38.
434. Matching reactivity of coupling agents and resins. In: Plueddemann EP, editor. Silane coupling agents. 2nd ed. New York, NY: Plenum Press; 1991. p. 3.
435. Plueddemann EP. Silane primers from tackifying resins. In: Proceedings of 21st Annual Conference Composites Institute, paper 3-D. Washington, DC: Society of the Plastics Industry; 1966.
436. Plueddemann EP, Stark GL. Silane primers for bonding to polyolefins. In: Proceedings of 35th Annual Conference Composites Institute, paper 20-B. Washington, DC: Society of Plastics Industry; 1980.
437. Plueddemann EP. Dow Corning. Primer composition. US patent 4,231,910; November 4, 1980.
438. D.R. Coulter., E.F. Cuddihy., E.P. Plueddemann Chemical bonding technology for terrestrial photovoltaic modules, DOW/JPC-1022-91 Publication 1983 NASA Jet Propulsion Lab Pasadena, CA pp. 83-6.
439. Pape PG, Plueddemann EP. The use of mixed silane coupling agents. In: Proceedings of 40th Annual Conference Composites Institute, paper 17-F. Washington, DC: Society of the Plastics Industry; 1985.
440. P.G. Pape., E.P. Plueddemann Improvements in silane coupling agents for more durable bonding at the polymer-reinforcement interface Eng Plas 6 1993 196-207.
441. Plueddemann EP, Pape PG. Adhesion enhancing additives for silane coupling agents. In: Proceedings of 42nd Annual Conference Composites Institute, paper 21-E. Washington, DC: Society of Plastics Industry; 1987.
442. Canova LA, Stafford SC, Ulrich AD. Influence of silane addition technique on composite preparation and properties. In: Proceedings of ANTEC, Society of Plastics Engineers, Los Angeles, CA, May 3-7, 1987:1250. Newtown, CT: Society of Plastics Engineers.
443. Smith G. Evaluation of silane coupling agents in mineral-filled polypropylene. In: Proceedings of ANTEC, Society of Plastics Engineers, Dallas, TX, May 6-10, 1990:1946-1948. Newtown, CT: Society of Plastics Engineers.
444. Hartlein RC. Dow Corning. Silane and chlorinated organic compounds. US patent 3,630,827; December 28, 1971.
445. Speier JL. Dow corning. Preparation of alkyl polysulfides. US patent 4,125,552; November 14, 1978.
446. Pletka HD, Michel R. Degussa. Process for the production of sulfur containing organosilicon compounds. US patent 4,072,701; February 7, 1978.
447. Pickwell RJ, Osterholtz FD. Union carbide. Organofunctional silane-siloxane oligomer coupling compositions. US patent 4,526,922; July 2, 1985.
448. P. Walker Organosilanes as adhesion promoters K. Mittal. Silanes and other coupling agents 1992 VSP Utrecht, the Netherlands 21-47.
449. Plueddemann EP. State of the art of silane coupling agents. In: Proceedings of American Society for Composites, First Technical Conference, Dayton, OH. Boca Raton, FL: CRC Press; 1985, pp. 264-79.
450. van Ooij WJ, Subramanian V, Zhang C, Univ. of Cincinnati. Method of preventing corrosion of metals using silanes. US patent 6,261,638; July 17, 2001.
451. Brown K, Bines EB, Song J, Tang N, Brent International PLC. Method of treating metals using amino silanes and multi-silyl-functional silanes in admixture. US patent 6,132,808; October 17, 2000.
452. Y. Dong., D. Bhattacharyya., P.J. Hunter Experimental characterisation and object-oriented finite element modeling of polypropylene/organoclay nanocomposites Compos Sci Technol 68 2008 2864-2875.
453. Dow Corning Corporation, Midland, MI. ; 2010.
454. Evonik Degussa, Essen, Germany. .
455. Momentive Performance Materials, North Greenbush, NY. .
456. Chisso Corporation, Tokyo, Japan. .
457. Shin-Etsu Chemical, Tokyo, Japan. .
458. KCC Silicones, Seoul, Korea. .
459. Nanjing Capatue, Nanjing, China. .
460. Wuhan University Silicone New Material Co. Wuhan, China. .
461. Kenrich Petrochemicals, Bayonne, NJ. .
462. Manchem/FedChem, Cleveland, OH. .
463. Eastman Chemical Company, Kingsport, TN. .
464. DuPont, Wilmington, DE. .
465. Nippon Paper Chemicals, Tokyo, Japan. .
466. DuPont, Wilmington, DE. .