Surface Treatment and Repair Bonding

Advances in the Bonded Composite Repair of Metallic Aircraft Structure

Volumn 1-2, Issue , 2002, Pages 41-86

  Arnott, D ^a   Rider, A ^a   Mazza, J ^b  

^a DEFENCE SCIENCE AND TECHNOLOGY ORGANISATION   (Australia)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVES; AIRCRAFT MANUFACTURE; AIRFRAMES; ALLOY STEEL; BOND (MASONRY); CHEMICAL BONDS; JOINTS (STRUCTURAL COMPONENTS); METAL CLEANING; REPAIR;

CHEMICAL TREATMENTS; INITIAL CONDITIONS; METALLIC AIRCRAFT STRUCTURES; PRACTICAL PROCEDURES; PREPARATION PROCESS; REPAIR APPLICATIONS; SURFACE PREPARATION; TOUGHENED EPOXIES;

SURFACE TREATMENT;

EID: 84940842168     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-008042699-0/50005-X     Document Type: Chapter

References (129)

1. Huntsberger J.R. Interfacial energies, contact angles and adhesion. Treatise on Adhesion and Adhesives 1981, 1. 5, Marcel Dekker Inc., Dordrecht. R.L. Patrick (Ed.).
2. Baker A.A. Bonded composite repair of primary aircraft structure. Composite Structures 1999, 47:431-443.
3. Kinloch A.J. Adhesion and Adhesives, Science and Technology 1986, 56-57. Chapman & Hall, NY.
4. DeBruyne N.A. J. Appl. Chem. 1956, 6:303. July.
5. Huntsberger J.R. J. Adhesion 1981, 12:3-12.
6. Hiemenz P.C. Principles of Colloid and Surface Chemistry, revised and expanded 1986, Chapter 6, Marcel Dekker, London & New York. 2nd ed.
7. Wenzel R.N. Ind. Eng. Chem. 1936, 28:988.
8. Bascom W.D., Partick R.L. Adhesives Age 1974, 17(10):25.
9. DeBruyne N.A. Aero Research Tech Notes No 168 1956, 1.
10. Packham D.E. In Adhesion Aspects of Polymeric Coatings 1983, 19. K. Mittal (Ed.).
11. Arnott D.R., Wilson A.R., Pearce P.J., et al. Void development in aerospace film adhesives during vacuum bag cure. Int. Aerospace Congress 97 1997, 15.
12. Arnott D.R., Wilson A.R., Rider A.N., et al. Appl. Surf. Sci. 1993, 70/71:109.
13. Kinloch A.J. Adhesion and Adhesives - Science and Technology 1987, Chapman and Hall, Plenum N.Y.
14. Minford J.D. Handbook of Aluminium Bonding Technology and Data 1993, Marcel Dekker.
15. Macarthur Job Air Disaster Volume 2 Aerospace Publications PO Box 3105 Weston Creek ACT, (1996) Chapter 11.
16. Davis M.J. Deficiencies in regulations for certification and continuing airworthiness of bonded structures. Int. Aerospace Congress 97 1997, 215.
17. Davis M.J. Pro. 41st Int. SAMPE Symp. 1996, 936.
18. Davis M.J. Pro. Int. Symp. on Composite Repair of Aircraft Structure 1995.
19. Hart-Smith L.J., Davis M.J. Pro. of 41st Int. SAMPE Symp. and Exhibition 1996.
20. Royal Australian Air Force Engineering Standard C5033, Composite Materials and Adhesive Bonded Repairs, September 1995, RAAF Headquarters Logistics Command, Melbourne, Vic., Australia.
21. Pearce P.J., Camilleri A., Olsson-Jacques C.L., et al. A Benchmarking Review of RAAF Structural Adhesive Bond Procedures 1999, DSTO-Aeronautical and Maritime Research Laboratory Report DSTO-TR-0267. May.
22. Gurney G., Amling R. Adhesion Fundamentals and Practice 1969, 211-217. McLaren.
23. Baker A.A. In Bonded Repair of Aircraft Structures 1988, 118. Martinius Nijhoff. A.A. Baker, R. Jones (Eds.).
24. Ashcroft I.A., Digby R., Shaw S.J. Accelerated Ageing and life prediction of Adhesively-bonded Joints. Abstracts Euradhesion 98/WCARP 1 1998, 285.
25. Hardwick D.A., Ahearn J.S., Venables J.D. J. Mat. Sci. 1984, 19:223.
26. Cognard J. J. Adhesion 1986, 20:1.
27. Broek D. Elementary Engineering Fracture Mechanics 1986, 128. Martinius Nijhoff, Dortrecht.
28. Stone M.H., Peet T. Evaluation of the Wedge Test For Assessment of Durability of Adhesive Bonded Joints Royal Aircraft Establishment Tech 1980, Memo, Mat 349, July.
29. Mostovoy S., Crosley P.B., Ripling E.J. J. of Materials 1967, 2(3):661.
30. Grosko, J., Lockheed Aeronautical systems Co, Georgia Division (communication).
31. Kinloch A.J. Adhesion and Adhesives Science and Technology 1987, 123-151. Chapman and Hall.
32. Rider A.N., Arnott D.R. The influence of adherend topography on the fracture toughness of aluminium-epoxy adhesive joints in humid environments, (2001). J. of Adhesion 2000, 75:203-228.
33. Rider A.N., Arnott D.R. Influence of Adherend Topography on the Durability of Adhesive Bonds Structural Integrity and Fracture 1998, 121-132. 21-22 Sept. Melbourne Australia (ISBN (Book) 0 646 36038 8). C.H. Wang (Ed.).
34. Rider A.N. Surface Properties Influencing the Fracture Toughness of Aluminium Epoxy Joints 1998, Ph.D. University of New South Wales, London.
35. Schmidt R.G., Bell J.P. Advances in Polymer Science 1986, 19:41.
36. Arnott D.R., Rider A.N., Olsson-Jacques C.L., et al. Bond durability performance - The Australian Silane Surface Treatment. 21st Congress of ICAS 1998.
37. Hong S.G., Boerio F.J. J. Adh. 1990, 32:67.
38. Olsson-Jacques C.L., Wilson A.R., Rider A.N., et al. The Effect of Contaminant on the Durability of Bonds Formed with Epoxy Adhesive Bonds with Alclad Aluminium Alloy. Surface and Interface Analysis 1996, 24(9):569-577.
39. Arnott D.R., Wilson A.R., Rider A.N., et al. Research underpinning the adherend surface preparation aspects of the RAAF engineering standard C5033. Int. Aerospace Congress 97 1997, 41.
40. Venables J.D. J. Mater. Sci. 1984, 19:2431.
41. Rider A.N., Arnott D.R., Wilson A.R., et al. Materials Science Forum 1995, 189-190.
42. Rider A.N., Arnott D.R., Wilson A.R., et al. Materials Science Forum 1995, 235-240.
43. Rider A.N., Arnott D.R. Surface and Interface Analysis 1996, 24(9):583.
44. Arnott D.R., Kindermann M.R. J. of Adhesion 1995, 48:101-119.
45. Cognard J. J. Adhes. 1996, 57:31.
46. Evans J.R., Packham D.E. J. Adhesion 1979, 10:177.
47. Packham D.E. Int. J. Adhesion & Adhesives 1986, 2(4):225.
48. Wilson A.R., Farr N.G., Arnott D.R., et al. Relationship of Surface Preparation of Clad 2024 Aluminium Alloy to Morphology and Adhesive Bond Strength. Australian Aeronautical Conf. 1989, 221-225.
49. Lambrianidis L.T., Arnott D.R., Wilson A.R., et al. The Effect and Evaluation of Gritblast Severity on Adhesive Bond Durability for Aircraft Repairs. 2nd Pacific and Int. Conf. on Aerospace Science and Technology and 6th Australian Aeronautical Conf. 1995, 355-360.
50. Arnott D.R., Pearce P.J., Wilson A.R., et al. The effect on mechanical properties of void formation during vacuum bag processing of epoxy film adhesives. Proc. 2nd Pacific and Int. Conf. on Aerospace Science and Technology 1995, 811-816. 21-23 March, The Australian Institute of Engineers, Australia.
51. Pearce P.J., Arnott D.R., Camilleri A., et al. J. Adh. Sci Technol. 1998, 12(6):567.
52. Arnott D.R., Baxter W.J., Rouze S.R. J. Electrochem Soc. 1981, 128(4):843-847. (Solid State Science and Technology).
53. Venables J.D. J. Mat. Sci. 1984, 19:2431-2453.
54. Solly R.K., Chester R.J., Baker A.A. Bonded Repair with Nickel Electroforms. DSTO Technical Report 2000, in preparation.
55. Clearfield H.M., McNamara D.K., Davis G.D. Engineered Materials Handbook, Vol. 3 Adhesives and Sealants 1990, 259. (technical chairman), ASM International, Melbourne. H.F. Brinson (Ed.).
56. Landrock A.H. Adhesives Technology Handbook 1985, 66. Noyes Publications.
57. Marceau J.A. Adhesive Bonding of Aluminum Alloys 1985, 51. 51, Marcel Dekker, Inc., Park Ridge, NJ. E.W. Thrall, R.W. Shannon (Eds.).
58. Young L. Anodic Oxide Films 1961, 1-3. Academic Press, New York.
59. Schmidt R.G., Bell J.P. Advances in Polymer Science 1986, 15:33.
60. Davis G.D., Ahearn J.S., Matienzo L.J., et al. J. Mat. Sci. 1985, 20:975.
61. Kuhbander R.J., Mazza J.P. Proc. 38th Int. SAMPE Symp. 1993, 1225.
62. Baker A.A., Chester R.J. Int. J. Adhesion and Adhesives 1992, 12:73.
63. Mazza, J.J., Avram, J.B. and Kuhbander, R.J. Grit-blast/Silane (GBS) Aluminium Surface Preparation for Structural Adhesive Bonding, WL-TR-94-4111 (interim report under US Air Force Contracts F33615-89-C-5643 and F33615-95-D-5617).
64. Clearfield H.M., McNamara D.K., Davis G.D. Engineered Materials Handbook, Vol. 3 Adhesives and Sealants 1990, 254. (technical chairman), ASM International. H.F. Brinson (Ed.).
65. Dukes W.A., Brient R.W. J. Adhesion 1969, 1:48.
66. Wolfe, H.F., Rupert, C.L. and Schwartz, H.S. (1981). AFWAL-TR-81-3096 August.
67. Internal communication, Royal Australian Air Force, Amberley Air Force Base.
68. Wilson A.R., Kindermann M.R., Arnott D.R. Void development in an epoxy film adhesive during vaccum bag cure. Proc. 2nd Pacific and Int. Conf. on Aerospace Science and Technology 1995, 625-630. 20-23 March, The Institution of Engineers.
69. Bijlmer P.F.A. Characterisation of the Surface Quality by Means of Surface potential Difference in Surface Contamination, Genesis Detection and Control 1979, 2:723. Plenum Press, Australia, melbourne. K.L. Mittal (Ed.).
70. Smith T. J. Appl. Phys. 1975, 46:1553.
71. Gause R. A non Contacting Scanning Photoelectron Emission Technique for Bonding Surface Cleanliness Inspection Fifth Annual NASA NDE Workshop 1987.
72. Photo Emission Technology, 766 Lakefield Rd. Suite h, Westlake Ca 91361.
73. CRC Handbook of Chemistry and Physics 1973/74, E80. Chemical Rubber Co. 54th edn. R.C. Weast (Ed.).
74. Olsson-Jacques C.L., Arnott D.R., Lambrianidis L.T., et al. Toward quality monitoring of adherend surfaces prior to adhesive bonding in aircraft repairs. The Int. Aerospace Congress 1997 - 7th Australian Aeronautical Conf. 1997, 511-520.
75. Foster Miller Inc 195 Bearhill Rd. Waltham MA 02451-1003 and cstevenson@foster-miller.com.
76. Minford J.D. Handbook of Aluminium Bonding Technology and Data 1993, 58. Marcel Dekker.
77. Clearfield H.M., McNamara D.K., Davis G.D. Engineered Materials Handbook, Vol. 3 Adhesives and Sealants 1990, 261. (technical chairman), ASM International. H.F. Brinson (Ed.).
78. Kinloch A.J. Adhesion and Adhesives Science and Technology 1987, 101-103. Chapman and Hall.
79. Thrall E.W. Failures in Adhesively Bonded Structures (Lecture No. 5), Douglas Paper 6703, Presented to AGARD-NATO Lecture Series 102: Bonded Joints and Preparation for Bonding 1979.
80. Shannon, R.W., et al. (1978). Primary Adhesively Bonded Structure Technology (PABST) General Material Property Data, AFFDL-TR-77-107 (report for US Air Force Contract F33615-75-C-3016), September.
81. Reinhart T.J. Bonded Repair of Aircraft Structures 1988, 23, Martinus Nijhoff Publishers, London. A.A. Baker, R. Jones (Eds.).
82. Clearfield H.M., McNamara D.K., Davis G.D. Engineered Materials Handbook, Vol. 3 Adhesives and Sealants 1990, 260. (technical chairman), ASM International, Dordrecht, The Netherlands. H.F. Brinson (Ed.).
83. Standard guide for preparation of aluminum surfaces for structural adhesives bonding (phosphoric acid anodising) 1997, 287-290. American Society for Testing and Materials.
84. Griffen C., Askins D.R. Non-Chromate Surface Preparation of Aluminum 1988, AFWAL-TR-88-4135 (interim report for US Air Force Contract No. F33615-84-C-5130), August.
85. Marceau J.A. Adhesive Bonding of Aluminum Alloys 1985, 55. Marcel Dekker, Inc., West Condshohocken, PA. E.W. Thrall, R.W. Shannon (Eds.).
86. Askins D.R., Byrge D.R. Evaluation of 350°F Curing Adhesive Systems on Phosphoric Acid Anodised Aluminum Substrates 1986, AFWAL-TR-86-4039 (interim report for US Air Force Contract Nos. F33615-82-C-5039 and F33615-84-C-5130), August.
87. Peterson E.E., Arnold D.B., Locke M.C. Compatibility of 350 °F curing honeycomb adhesives with phosphoric acid anodising. Proc. of 13th National SAMPE Technical Conf. 1981, 177-188.
88. Kuperman M.H., Horton R.E. Adhesive Bonding of Aluminum Alloys 1985, 430-446. Marcel Dekker, Inc., New York. E.W. Thrall, R.W. Shannon (Eds.).
89. Bijlmer P.F. Adhesive Bonding of Aluminum Alloys 1985, 28-32. Marcel Dekker, Inc., New York. E.W. Thrall, R.W. Shannon (Eds.).
90. Rogers N.L. Adhesive Bonding of Aluminum Alloys 1985, 41-49. Marcel Dekker, Inc., New York. E.W. Thrall, R.W. Shannon (Eds.).
91. Rogers N.L. J. of Applied Polymer Science: Applied Polymer Symp. 1977, 32:37-50.
92. Thrall E.W. Failures in Adhesively-bonded Structures. Douglas Aircraft Company Paper 6703 1979, 2-3.
93. Gaskin G.B., et al. Investigation of sulfuric-boric acid anodizing as a replacement for chromic acid anodization: Phase I. Proc. 26th Int. SAMPE Technical Conf. 1994, 258-264.
94. Clearfield H.M., McNamara D.K., Davis G.D. Engineered Materials Handbook, Vol. 3 Adhesives and Sealants 1990, 260-263. (technical chairman), ASM International, New York. H.F. Brinson (Ed.).
95. Packham D.E. Handbook of Adhesion 1992, 201. Longman Scientific & Technical. D.E. Packham (Ed.).
96. Adelson K.M., Garnis E.A., Wegman R.F. Evaluation of the Sulfuric Acid-Ferric Sulfate and Phosphoric Acid Anodise Treatments prior to Adhesive Bonding of Aluminum 1982, ARSCD-TR-82013 (US Army Final Report), September.
97. Pinnell W.B. Hydrogen Embrittlement of Metal Fasteners Due to PACS Exposure, 1999, AFRL-ML-WP-TR-2000-4153, (Report for Delivery Order 0004, Task 2 of US Air Force Contract F33615-95- D-5616), August.
98. Locke, M.C. and Scardino, W.M. Phosphoric Acid Non-Tank Anodise (PANTA) Process for Repair Bonding, Proc. of, pp. 218-241.
99. Pergan I. Int. J. Adhesion and Adhesives 1999, 19:199.
100. Saliba S.S. Phosphoric acid containment system (PACS) evaluation for on-aircraft anodisation of aluminum surfaces. Proc. of 38th Int. SAMPE Symp. 1993, 38:1211-1224.
101. Podoba E.A., McNamara D., et al. Appl. Surf. Sci. 1981, 9:359-376.
102. Kuperman M.H., Horton R.E. Adhesive Bonding of Aluminum Alloys 1985, 430-446. Marcel Dekker, Inc., UK. E.W. Thrall, R.W. Shannon (Eds.).
103. Locke M.C., Horton R.E., McCarty J.E. Anodize Optimization and Adhesive Evaluations for Repair Applications, 1978, AFML-TR-78-104 (final report for US Air Force Contract F33615-73-C-5171), July.
104. Shaffer D.K., Clearfield H.M., Ahearn J.S. Treatise on Adhesion and Adhesives 1991, 7:437-444. Marcel Dekker, Inc., New York. J.D. Minford (Ed.).
105. Clearfield H.M., et al. J. Adhesion 1989, 29:81-102.
106. Brown S.R., Pilla G.J. Titanium Surface Treatments for Adhesive Bonding 1982, NADC-82032-60 (phase report for US Navy Airtask No. WF61-542-001), March.
107. Semco Pasa-Jell 107 Technical Data Sheet, February 1996.
108. TURCO® 5578 Technical Data Bulletin, February 1999.
109. Clearfield H.M., McNamara D.K., Davis G.D. Engineered Materials Handbook, Vol. 3 Adhesives and Sealants 1990, 264-273. (technical chairman), ASM International, New York. H.F. Brinson (Ed.).
110. Snogren R.C. Handbook of Surface Preparation 1974, 265. Palmerton Publishing Co., Inc.
111. Landrock A.H. Adhesives Technology Handbook 1985, 72-75. Noyes Publications, New York.
112. Wegman R.F. Surface Preparation Techniques for Adhesive Bonding 1989, 66-70. Noyes Publications, Park Ridge, NJ.
113. Baker A.A., Chester R.J., Davis M.J., et al. Composites 1993, 24:6.
114. Hart-Smith L.J., Brown D., Wong S. Handbook of Composites 1998, 667-685. Chapman and Hall, Park Ridge, NJ. S.T. Peters (Ed.).
115. Landrock A.H. Adhesives Technology Handbook 1985, 105-106. Noyes Publications, London.
116. Hart-Smith L.J., Ochsner R.W., Radecky R.L. Engineered Materials Handbook, Vol. 3 Adhesives and Sealants 1990, 840-844. (technical chairman), ASM International, Park Ridge, NJ. H.F. Brinson (Ed.).
117. Hart-Smith L.J., Redmond G., Davis M.J. The curse of the nylon peel ply. Proc. of 41st Int. SAMPE Symp. 1996, 41:303-317.
118. Mazza J.J. Advanced Surface Preparation for Metal Alloys. AGARD Report 816 1997, 10-11. February.
119. Mazza J.J. Advanced Surface Preparation for Metal Alloys. AGARD Report 816 1997, 10-12. February.
120. Blohowiak K.Y. Sol-gel technology for space applications. Proc. National Space and Missile Materials Symp. 2000.
121. Baes C.F., Mesmar R.E. In Sol-Gel Science-The Physics and Chemistry of Sol-Gel Processing 1990, Academic Press. C.J. Brinker, G.W. Scherer (Eds.).
122. Tiano T., Pan M., Dorogy W., et al. Functionally Gradient Sol-Gel Coatings for Aircraft Aluminum Alloys 1996, WL-TR-96-4108 (final report for US Air Force Contract F33615-95-C-5621), October.
123. Chu C., Zheng H. Sol-Gel Deposition of Active Alumina Coatings on Aluminum Alloys 1997, WL-TR-97-4114 (final report for US Air Force Contract F33615-94-C-5605), August.
124. Blohowiak, K.Y., Osborne, J.H. and Krienke, K.A. US Patents 6,037,060 (2000), 5,958,578 (1999), 5,939197 (1999), 5,869,141 (1999), 5,869,140 (1999), 5,849,110 (1998), 5,814,137 (1998).
125. Mazza J., Gaskin G., DePiero W., et al. Faster durable bonded repairs using sol-gel surface treatment. Proc. the 4th Joint DoD/FAA/NASA Conf. on Aging Aircraft 2000.
126. McCray D.B., Mazza J.J. Optimization of sol-gel surface preparations for repair bonding of aluminum alloys. Proc. 45th Int. SAMPE Symp. and Exhibition 2000, 53-54.
127. Blohowiak K.Y., Osborne J.H., Krienke K.A., et al. DOD/FAA/NASA Conf. on Aging Aircraft Proc. 1997.
128. McCray D.B., et al. An ambient-temperature adhesive bonded repair process for aluminum alloys. Proc. 46th Int. SAMPE Symp. and Exhibition 2001, 1135-1147.
129. Rider A.N., Arnott D.R. Int. J. Adhes. and Adhes. 2000, 20:209.