On automotive disc brake squeal part II: Simulation and analysis

SAE Technical Papers

Volumn , Issue , 2003, Pages

  Ouyang, Huajiang ^a   Nack, Wayne ^b   Yuan, Yongbin ^c   Chen, Frank ^a  

^a UNIVERSITY OF LIVERPOOL   (United Kingdom)

^b General Motor Corporation   (United States)

^c TRW Automotive   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BRAKES; CONTINUUM MECHANICS;

ANALYTIC METHOD; AUTOMOTIVE DISC; CONTINUUM MODEL; DISC BRAKE SQUEALS; METHOD DEVELOPMENT; OPERATIONAL SIMULATIONS; SIMULATION AND ANALYSIS; STATE OF THE ART;

TRANSIENT ANALYSIS;

EID: 85072428303     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2003-01-0684     Document Type: Conference Paper

References (84)

1. Abdelhamid, M. K., "Creep-groan of Disc Brakes". SAE Paper 951282, 1995
2. Brecht, J., et al, "Mechanisms of Brake Creep-groan". SAE Paper No. 973026, 1997.
3. Abdelhamid, M. K., "Brake judder analysis using transfer functions". SAE Paper 973018, 1997
4. Swartzfager D. G., et al, "Relationship of the transfer film formed under low pressure drag conditions and torque variation". SAE Paper 982255, 1998.
5. Kubota, M., et al, "A study of the mechanism causing high-speed brake judder". SAE Paper 980594, 1998.
6. Crolla, D. A., and Lang, A. M., "Brake noise and vibration-the state of the art". In Dowson, D., Taylor, C. M., and Godet, M., ed. Vehicle Tribology, No. 18 in Tribology Series, 165-174, 1991.
7. Yang, S., and Gibson, R. F., "Brake vibration and noise: review, comments and proposals". Int. J. Mater. & Product Tech., 12 (4-6), 496-513, 1997. (Pubitemid 127549516)
8. Kinkaid, N. M., O'Reilly, O. M., and Papadopoulos, P., "Automotive disc brake squeal: a review". Journal of Sound and Vibration, to appear in 2003.
9. Oden, J., and Martins, J., "Model and computational methods for dynamic friction phenomena". Computer Methods Appl. Mech. Eng., 52, 527-634, 1985.
10. Ibrahim, R. A., "Friction-induced vibration, chatter, squeal, and chaos: Part I-Mechanics of friction; Part II-Dynamics and modeling". Applied Mechanics Review, 47: 209-253, 1994.
11. Akay, A., "Acoustics of friction". J. Acoust. Soc. Am., 111 (4), 1525-1548, 2002. (Pubitemid 34302908)
12. Jarvis, R. P., and Mills, B., "Vibration induced by dry friction". Proc. Instn. Mech. Engrs., Vol. 178, No. 32, 1963-1964, 847-866.
13. Earles, S. W. E., and Lee, C. K., "Instabilities arising from the frictional interaction of a pin-disc system resulting in noise generation". ASME Journal of Engineering for Industry, vol. 98, Series B, No. 1, 81-88, 1976
14. North, M. R., "Disc brake squeal". Institute of Mechanical Engineers, C38/76, 169-176, 1976.
15. Millner, N., "An analysis of disc brake squeal". SAE Paper 780332, 1978
16. Chan, S. N., Mottershead, J. E., and Cartmell, M. P., "Parametric resonances at subcritical speeds in discs with rotating frictional loads". Proc. IMechE, Part C 208, 417-425, 1994.
17. Mottershead, J. E., Ouyang, H., Cartmell, M. P., and Friswell, M. I., "Parametric resonances in an annular disc, with a rotating system of distributed mass and elasticity; and the effects of friction and damping". Proceedings of the Royal Society of London A, 453 (1), 1-19, 1997.
18. Ouyang, H., Mottershead, J. E., Cartmell, M. P., and Friswell, M. I., "Friction-induced parametric resonances in discs: effect of a negative friction-velocity relationship". Journal of Sound Vibration, 209 (2), 251-264, 1998.
19. Hulten, J. O., and Flint, J., "An assumed modes approach to disc brake squeal analysis". SAE Paper 1999-01-1335, 1999.
20. Flint, J., "Modeling of high frequency disc-brake squeal". Proc. IMechE Int. Conf. on Auto. Brakes-Braking 2000, Leeds, 39-50, 2000.
21. Tzou, K. I., Wickert, J. A., and Akay, A., "In-plane vibration modes of arbitrary thick disc". ASME J. Vibr. Acoust., 120, 384-391, 1998. (Pubitemid 128652003)
22. Tseng, J-G., and Wickert, J. A., "Nonconservative stability of a friction loaded disk". ASME J. Vibr. Acoust., 120, 922-929, 1988.
23. Ouyang, H., and Mottershead, J. E., A moving-load model for disc-brake stability analysis. ASME Journal of Vibration and Acoustics, 125 (1), 1-6, 2003.
24. Nack, W. V., "Friction Induced Vibration: Brake Moan". SAE paper 951095, 1995.
25. Nack, W. V., "Brake squeal analysis by the finite element method". Int. J. Vehicle Des., 23 (3/4), 263-275, 2000. (Pubitemid 30596453)
26. Liles, G. D., "Analysis of disc brake squeal using finite element methods". SAE Paper 891150, 1989.
27. Ripin, Z. B. M., "Analysis of Disc Brake Squeal Using the Finite Element Method". PhD Thesis, Dept. Mech. Eng., University of Leeds, 1995.
28. Kung, S., Dunlap, K. B., and Ballinger, R. S., "Complex eigenvalue analysis for reducing low frequency brake squeal". SAE Paper 2000-01-0444, 2000.
29. th ISATA Conf. Automotive Braking Systems, Florence, Italy, 1996.
30. Yuan, Y., "Brake squeal analysis with FEM: numerical results". The 15th Annual SAE Brake Colloquium, Phoenix, October, 1997.
31. Yuan, Y., "A study of the effects of negative friction-speed slope on brake squeal". 1995 ASME Des. Eng. Tech. Conf., Vol. 3, Part A, 1153-1162, 1995.
32. st Report, on Drum Brake Squeal), Transactions of the JSME, Series C, 54, 497, 166-174, 1988.
33. Chan, S. N., Mottershead, J. E., and Cartmell, M. P., "Instabilities at subcritical speeds in discs with rotating frictional follower loads. ASME J. Vibr. Acoust., 117 (2), 240-242, 1995.
34. Tworzydlo, W., et al, "Experimental and numerical studies of friction induced oscillations of a pin on disk apparatus" ASME DETC97/VIB-3903, 1997.
35. Nishiwaki, M., "Generalised theory of brake noise". Proc. IMechE, J. Auto. Eng., 207, 195-202, 1993.
36. Nishiwaki, M., Harada, H., Okamura, H., and Ikeuchi, T., "Study on disc brake squeal". SAE Paper 890864, 1989.
37. Kido, I., Kurahachi, T., and Asai, M., "A study of low-frequency brake squeal noise". SAE Paper 960993, 1996.
38. Matsushima, T., Masumo, H., Ito, S., and Nishiwaki, M., "FE analysis of low-frequency disc brake squeal". SAE Paper 982251, 1998.
39. Guan, D., and Jiang, D., "A study on disc brake squeal using finite element methods". SAE Paper 980597, 1998.
40. Shi, T. S., Dessouki, O., Warzecha, T., and Jayasundera, A., "Advances in complex eigenvalue analysis for brake noise". SAE Paper 2001-0101603, 2001.
41. Matsuzaki, M., and Izumihara, T., "Brake noise caused by longitudinal vibration of the disc rotor". SAE Paper 930804, 1993.
42. Dunlap, K. B., Riehle, M. A., and Longhouse, R. E., "An investigative overview of automotive disc brake noise". SAE Paper 1999-01-0142, 1992.
43. Chen, F., Chen, Shih-Emn, and Harwood, P., "In-plane mode/friction process and their contribution to disc brake squeal at high frequency". SAE Paper 2000-01-2773, 2000.
44. Chen, F., Chern, Y., and Swayze, J., "Modal coupling and its effect on brake squeal". SAE paper 2002-01-0954, 2002.
45. Baba, H., Wada, T., and Takagi, T., "Study on reduction of brake squeal caused by in-plane vibration of rotor". SAE Paper 2001-01-3158, 2001.
46. Bae, J., and Wickert, J., "Free vibration of coupled disc-hat structures". J. Sound Vib., 235, 117-132, 2000.
47. Feld, D. J., and Fehr, D. J., "Complex eigenvalue analysis applied to an aircraft brake vibration problem". DE-Vol. 84-1, 1135-1142, AMSE, 1995.
48. Mottershead, J. E., "Vibration and friction-induced instability in discs". Shock Vib. Dig., 30, 14-31, 1998.
49. Mote, C. D., Jr., "Stability of circular plates subjected to moving loads". Journal of the Franklin Institute, 290, 329-344, 1970.
50. Iwan, W. D., and Moeller, T. L., "The stability of a spinning disc with a transverse load system". ASME Journal of Applied Mechanics, 43, 485-490, 1976.
51. Ono, K., Chen, J. S., and Bogy, D. B., "Stability analysis of the head-disk interface in a flexible disc drive," ASME J. Appl. Mech., 58, 1005-1014, 1991.
52. Ouyang, H., Mottershead, J. E., Brookfield, D. J., James, S., and Cartmell M. P., "A methodology for the determination of dynamic instabilities in a car disc brake". Int. J. Vehicle Design, 23 (3/4), 241-262, 2000. (Pubitemid 30596454)
53. Ouyang, H., Cao, Q., Mottershead, J. E., Treyde, T., and Cartmell, M. P., "Modelling and simulation of the vibration and squeal of a disc brake". Proc. IMechE Int. Conf. on Auto. Brakes-Braking 2002, Leeds, 43-52, 2002.
54. Nagy, L. I., Cheng, J., and Hu, Y., "A new method development to predict squeal occurrence". SAE Paper 942258, 1994.
55. Chargin, M. L., Dunne, L. W., and Herting, D. N., "nonlinear dynamics of brake squeal". Finite Elements in Analysis and Design, 28, 69-82, 1997.
56. Hu, Y., and Nagy, L. I., "Brake squeal analysis using nonlinear transient finite element method". SAE Paper 971610, 1997.
57. Hu, Y., Mahajan, S., and Zhang, K., "Brake squeal DOE using nonlinear transient analysis". SAE Paper 1999-01-1737, 1999.
58. Mahajan, S. K., Hu, Y., and Zhang, K., "Vehicle disc brake squeal simulation and experiences". SAE Paper 1999-01-1738, 1998.
59. Chern, Y., Chen, F., and Swayze, J., "Nonlinear Brake Squeal Analysis". SAE Paper 2002-01-3138, 2002.
60. Hendricx, W., Garesci, F., Pezzutto, A., and Van der Auweraer, H., "Experimental and numerical modeling of friction induced noise in disc brakes". SAE Paper 02AC-25, 2001.
61. Rook, T. E., Enright, J. J., Kumar, S., and Balagangsadhar, R., "Simulation of aircraft brake vibration using flexible multibody and finite element methods to guide component testing". SAE Paper 2001-01-3142, 2001.
62. Travis, M. H., "Nonlinear transient analysis of aircraft landing gear brake whirl and squeal". ASME, DE Vol. 84-1, 1995.
63. Qiao, S. L., and Ibrahim, R. A., "Stochastic dynamics of systems with friction-induced vibration". J. Sound. Vib., 223 (1), 115-140, 1999.
64. Ibrahim, R. A., Madhavan, S., Qiao, S. L., and Chang, W. K., "Experimental investigation of friction-induced noise in disc brake systems". Int. J. Vehicle Des., 23 (3/4), 218-240, 2000. (Pubitemid 30596455)
65. Willner, K., and Gaul, L., "A penalty approach for contact description by fem based on interface physics" Contact Mechanics II, WIT Press, 1995.
66. Hamzeh, O., Tworzydlo, and Chang, W. H., "Analysis of friction induced instabilities in a simplified aircraft brake". SAE 1999-01-3404, 1999.
67. Ouyang H., Mottershead J. E., Cartmell M. P., and Brookfield D. J., "Friction-induced vibration of an elastic slider on a vibrating disc". Int. J. Mech. Sci., 41, 325-336, 1999.
68. Samie, F., and Sheridan, D. C., "Contact analysis for a passenger car disc brake". SAE Paper 900005, 1990.
69. Tirovic, M., and Day, A. J., "Disc brake interface pressure distribution". Proc. IMechE, J. Auto. Eng., 205, 137-146, 1991. (Pubitemid 21721039)
70. Kikuchi, K., and Oden, J. T., Contact Problems in Elasticity. SIAM, 1988.
71. Lauresen, T. A., Computational Contact and Impact Mechanics: Fundamentals of Modeling Interfacial Phenomena in Nonlinear Finite Element Analysis. Springer, 2002.
72. Sextro, W., Dynamical Contact Problems with Friction: Models, Experiments and Applications. Springer, 2002.
73. Wriggers, P., Computational Contact Mechanics, Wiley, 2002.
74. Harding, P. R. J., and Wintel, J. B., "Flexural effects in disc brake pads". Proc. IMechE, 192, 1-7, 1978. (Pubitemid 8600709)
75. Day, A. J., Tirovic, M., and Newcomb, T. P., "Thermal effects and pressure distributions in brakes". Proc. IMechE, J. Auto. Eng., 205, 199-205, 1991.
76. Ghesquire, H., and Castel, L., "Brake squeal analysis and prediction". Proc. IMechE Conf. Autotech 1992, Paper C389/257, 1992.
77. Lee, Y. S., Brooks, P. C., Barton, D. C., and Crolla, D. A., "A study of disc brake squeal propensity using parametric finite element model". IMechE Conf. Trans., European Conf. on Noise and Vibration, 191-201, 1998.
78. Blaschke, P., Tan, M., Wang, A., "On the analysis of brake squeal propensity using finite element method". SAE Paper 2000-01-2765, 2000.
79. Ouyang, H., Mottershead, J. E., and Li, W., "Vibration and dynamic instability of moving load systems". The 25th International Conference on Noise and Vibration Engineering, 1355-1360, Leuven, Belgium, 2000.
80. Moirot, F., and Nguyen, Q. S., "Brake squeal: a problem of flutter instability of the steady sliding solution". Arch. Mech., 52, 645-661, 2000.
81. Rumold, W., and Swift, R. A., Evaluation of disc brake pad pressure distribution by multibody dynamic analysis. Proc. IMechE Int. Conf. on Auto. Brakes-Braking 2002, Leeds, 75-83, 2002.
82. Lötstedt, P., "Mechanical systems of rigid bodies subjected to unilateral constraints". SIAM J Appl. Math., 42, 281-296, 1982. (Pubitemid 12521692)
83. Bathe, K.-J., and Wilson, E. L., Numerical Methods in Finite element Analysis. Prentice-Hall, Inc., 1976.
84. Tworzydlo, W., Hamzeh, O., Zaton, W., Judek, T., "Friction induced oscillations of a pin on disk slider: analytical and experimental studies". Wear, 236, 9-23, 1999. (Pubitemid 30087150)