Vibration- and friction-induced instability in disks

Shock and Vibration Digest

Volumn 30, Issue 1, 1998, Pages 14-31

  Mottershead, John E ^a  

^a UNIVERSITY OF LIVERPOOL   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTICITY; FRICTION; MACHINE VIBRATIONS;

PARAMETRIC RESONANCE; TRANSVERSE ELASTICITY;

DISKS (MACHINE COMPONENTS);

EID: 0031647765     PISSN: 05831024     EISSN: None     Source Type: Journal    
DOI: 10.1177/058310249803000103     Document Type: Article

References (69)

1. Allaei, D., Soedel, W., and Yang, T. Y., 1986, "Natural frequencies and modes of rings that deviate from perfect axisymmetry," J. Sound Vibration 111, 9-27.
2. Allaei, D., Soedel, W., and Yang, T. Y, 1987, "Eigenvalues of rings with radial spring attachments," J. Sound Vibration 121, 547-561.
3. Barasch, S. and Chen, Y., 1972, "On the vibration of a rotating disk," Trans. ASME J. Appl. Mech. 39, 1143-1144.
4. Benson, R. C. and Bogy, D. B., 1978, "Deflection of a very flexible spinning disk due to a stationary transverse load," Trans. ASME J. Appl. Mech. 45, 636-642.
5. Boulahbal, D. and Crandall, S. H., 1997, "Self-excited harmonic and solitary waves in a spinning disk (with video presentation)," Proceedings of the 1997 ASME Design Engineering Technical Conferences, September 14-17, Sacramento, California, DETC97/VIB-4093 (on CDROM).
6. Brooks, P. C., Crolla, D. A., Lang, A. M., and Schafer, D. R., 1993, "Eigenvalue sensitivity analysis applied to disc brake squeal," Institution of Mechanical Engineers paper C444/004/93.
7. Bucher, I. and Ewins, D. J., 1997, "Multidimensional decomposition of time-varying vibration response signals in rotating machinery," Mech. Sys. Sig. Proc. 11(4), 577-601.
8. Chan, S. N., Mottershead, J. E., and Cartmell, M. P., 1994, "Parametric resonances at subcritical speeds in discs with rotating frictional loads," Proc. Inst. Mech. Engineers, Part C 208, 417-425.
9. Chen, J. S. and Bogy, D. B., 1992, "Effects of load parameters on the natural frequencies and stability of a flexible spinning disk with a stationary load system," Trans. ASME J. Appl. Mech. 59, 5230-5235.
10. Chonan, S., Jiang, Z. W., and Shyu, Y J., 1992, "Stability analysis of a floppy disk drive system and the optimum design of the disk stabilizer," Trans. ASME J. Vib. Acoust. 114, 326-329.
11. Eversman, W., 1968, "Transverse vibrations of a clamped spinning membrane," AIAA Journal 6, 1395-1397.
12. Eversman, W. and Dodson, R. O., 1969, "Free vibration of a centrally clamped spinning circular disk," AIAA Journal 7, 2010-2012.
13. Ewins, D. J., 1969, "The effects of detuning upon the forced vibrations of bladed discs," J. Sound Vibration 9, 65-79.
14. Fox, C.H.J., 1990, "A simple theory for the analysis and correction of frequency splitting in slightly imperfect rings," J. Sound Vibration 142(2), 227-243.
15. Honda, Y., Matsuhisa, H., and Sato, S., 1985, "Modal response of a disk to a moving concentrated harmonic force," J. Sound Vibration 102, 457-472.
16. Huang, F. Y. and Mote, C. D., 1996, "Mathematical analysis of stability of a spinning disk under rotating, arbitrarily large damping forces," Trans. ASME J. Vib. Acoust. 118, 657-662.
17. Huseyin, K., 1978, Vibrations and Stability of Multiple Parameter Systems, Sijthoff and Noordhoff, Alphen aan der Rijn.
18. Hutton, S. G., Chonan, S., and Lehmen, B. F., 1987, "Dynamic response of a guided circular saw," J. Sound Vibration 112, 527-539.
19. Ibrahim, R. A., 1994a, "Friction-induced vibration, chatter, squeal and chaos - Part 1: Mechanics of contact and friction," Trans. ASME Appl. Mech. Rev. 47, 209-226.
20. Ibrahim, R. A., 1994b, "Friction-induced vibration, chatter squeal and chaos - Part II: Dynamics of modelling," Trans. ASME Appl. Mech. Rev. 47, 227-253.
21. Irretier, H. and Reuter, F., 1995, "Experimental modal analysis of rotating disk systems," Trans. ASME 15th Biennial Conference on Mechanical Vibration and Noise, September 17-20, Boston, 3(B), 1201-1206.
22. Iwan, W. D. and Moeller, T. L., 1976, "The response of a spinning disk with a transverse load system," Trans. ASME J. Appl. Mech. 43, 485-490.
23. Iwan, W. D. and Stahl, K. J., 1973, "The response of an elastic disk with a moving mass system," Trans. ASME J. Appl. Mech, 40, 445-451.
24. Jiang, Z. W., Chonan, S., and Abe, H., 1990, "Dynamic response of a read/write head floppy disk system subjected to axial excitation," Trans. ASME J. Vib. Acoust. 112, 53-58.
25. Lamb, H. and Southwell, R. V., 1921, "The vibrations of a spinning disc," Proc. Roy. Soc. Lon. A 99, 272-280.
26. Lee, C. W. and Kim, M.-E., 1996, "Identification of travelling wave modes in rotating disks using wave dFRFs," 14th International Modal Analysis Conference, February 12-15, Dearborn, Michigan, 1403-1408.
27. Lee, D. and Waas, A. M., 1997, "Stability analysis of a rotating multi-layer annular plate with a stationary frictional follower load," Int. J. Mech. Sci. 39(10), 1117-1138.
28. Leissa, A. W., 1969, Vibration of Plates, U.S. Government Printing Office, Washington, DC. (Reprinted by the Acoustical Society of America, 1993)
29. MacNeal, R. H., 1994, Finite Elements: Their Design and Performance, Marcel Dekker, New York.
30. Mallik, A. K. and Mead, D. J., 1977, "Free vibration of thin circular rings on periodic radial supports," J. Sound Vibration 54(1), 13-27.
31. Martins, J.A.C., Oden, J. T., and Simoes, F.M.F., 1990, "A study of static and kinetic friction," Int. J. Eng. Sci. 28(1), 29-92.
32. McLeod, A. J. and Bishop, R.E.D., 1965, "The forced vibration of circular flat plates," Mechanical Engineering Science Monograph No. 1.
33. Mignolet, M. P., Eick, C. D., and Harish, M. V., 1996, "Free vibrations of flexible rotating discs," J. Sound Vibration 196(5), 537-577.
34. Millner, N., 1978, "An analysis of disc brake squeal," S.A.E. paper 780332.
35. Mote, C. D., 1965, "Free vibration of initially stressed circular disks," Trans. ASME J. Eng. Ind. 87B, 258-264.
36. Mote, C. D., 1967, "Natural frequencies in annuli with induced thermal membrane stresses," Trans. ASME J. Eng. Ind. 89B, 611-618.
37. Mote, C. D., 1970, "Stability of circular plates subjected to moving loads," J. Franklin Inst. 290, 329-344.
38. Mote, C. D., 1977, "Moving-load stability of a circular plate on a floating central collar," J. Acoust. Soc. Am. 61, 439-447.
39. Mottershead, J. E. and Chan, S. N., 1995, "Flutter instability of circular discs with frictional follower loads," Trans. ASME J. Vib. Acoust. 117, 161-163.
40. Mottershead, J. E., Ouyang, H., Cartmell, M. P., and Friswell, M. I., 1997, "Parametric resonances in an annular disc, with a rotating system of distributed mass and elasticity; and the effects of friction and damping," Proc. Roy. Soc. Lon. A 453, 1-19.
41. Murakami, H., Tsunada, N., and Kitamura, T., 1984, "A study concerned with a mechanism of disc-brake squeal," S.A.E. paper 841233.
42. Murphy, J. P., Perrin, R., and Charnley, T., 1984, "Doublet splitting in the circular plate," J. Sound Vibration 95(3), 389-395.
43. Nayfeh, A. H. and Mook, D. T., 1979, Nonlinear Oscillations, Wiley Interscience, New York.
44. Nelson, R. L. and Thomas, D. L., 1978, "Free vibration analysis of cooling towers with column supports," J. Sound Vibration 57, 149-153.
45. Nishiwaki, M., 1993, "Generalised theory of brake noise," Proc. Inst. Mech. Engineers, Part D, J. Automobile Eng. 207, 195-292.
46. North, M. R., 1976, "Disc brake squeal," Institution of Mechanical Engineers paper C38/76.
47. Oden, J. T. and Martins, J.A.C., 1985, "Models and computational methods for dynamic friction phenomena," Comp. Meth. Appl. Mech. Eng. 52, 527-634.
48. Ono, K., Chen, J. S., and Bogy, D. B., 1991, "Stability analysis of the head-disk interface in a flexible disc drive," Trans. ASME J. Appl. Mech. 58, 1005-1014.
49. Ouyang, H., Mottershead, J. E., Friswell, M. I., and Cartmell, M. P., in press, "Friction-induced parametric resonances in discs: Effect of a negative friction-velocity relationship," J. Sound Vibration.
50. Parker, R. G. and Mote, C. D., 1991, "Tuning of the natural frequency spectrum of a circular plate by in-plane stress," J. Sound Vibration 145(1), 95-110.
51. Parker, R. G. and Mote, C. D., 1996, "Exact perturbation for the vibration of almost annular or circular plates," Trans. ASME J. Vib. Acoust. 118, 436-445.
52. Perrin, R. and Charnley, T., 1973, "Group theory and the bell," J. Sound Vibration 31, 411-418.
53. Prescott, J., 1924, Applied Elasticity, Longman, London.
54. Shen, I. Y, 1993, "Response of a stationary damped circular plate under a rotating slider bearing system," Trans. ASME J. Vib. Acoust. 115, 65-69.
55. Shen, I. Y. and Mote, C. D., 1991a, "On the mechanisms of instability of a circular plate under a rotating spring-mass-dashpot system," J. Sound Vibration 148, 307-318.
56. Shen, I. Y. and Mote, C. D., 1991b, "Parametric resonances of a circular plate with inclusions subjected to a rotating spring," J. Sound Vibration 149, 164-169.
57. Shen, I. Y. and Mote, C. D., 1992a, "Dynamic analysis of finite linear elastic solids containing small elastic imperfections: Theory with application to asymmetric circular plates," J. Sound Vibration 155(3), 443-465.
58. Shen, I. Y. and Mote, C. D., 1992b, "Parametric excitation under multiple excitation parameters: Asymmetric circular plates under a rotating spring," Int. J. Solids Struct. 29, 1019-1032.
59. Shen, I. Y. and Mote, C. D., 1992c, "Parametric resonances of an axisymmetric circular plate subjected to a rotating mass," J. Sound Vibration 152, 573-576.
60. Simmonds, J. G., 1962, "The transverse vibrations of a flat spinning membrane," J. Aero. Sci. 29, 16-18.
61. Simmonds, J. G., 1963, "Axisymmetric, transverse vibrations of a spinning membrane clamped at its centre," AIAA Journal 1, 1224-1225.
62. Southwell, R. V., 1921, "On the free transverse vibrations of a uniform circular disc clamped at its centre; and on the effects of rotation," Proc. Roy. Soc. Lon. A 101, 133-153.
63. Stange, W. A. and MacBain, J. C., 1985, "An investigation of dual mode phenomena in a mistuned bladed disc," Trans. ASME J. Vib. Acoust. 105, 402-407.
64. Thomas, D. L., 1979, "Dynamics of rotationally periodic structures," Int. J. Numer. Meth. Eng. 14, 81-102.
65. Tobias, S. A. and Arnold, R. N., 1957, "The influence of dynamical imperfections on the vibration of rotating disks," Proc. Inst. Mech. Engineers 171, 669-690.
66. Tseng, J. G. and Wickert, J. A., 1994a, "On the vibration of bolted plate and flange assemblies," Trans. ASME J. Vib. Acoust. 116, 469-473.
67. Tseng, J. G. and Wickert, J, A., 1994b, "Vibration of an eccentrically clamped annular plate," Trans. ASME J. Vib. Acoust. 116, 155-160.
68. Valeev, K. G., 1963, "On the danger of combination resonances," J. Appl. Math. Mech. 27, 1745-1759.
69. Yu, R. L. and Mote, C. D., 1987, "Vibration and parametric excitation in asymmetric circular plates under moving loads," J. Sound Vibration 119, 409-427.