Tensile, barrier, dynamic mechanical, and biodegradation properties of cassava/sugar palm fiber reinforced cassava starch hybrid composites

BioResources

Volumn 12, Issue 4, 2017, Pages 7145-7160

  Edhirej, Ahmed ^a,b   Sapuan, S M ^a   Jawaid, Mohammad ^a,c   Zahari, Nur Ismarrubie ^a  

^a UNIVERSITY PUTRA MALAYSIA   (Malaysia)

^b SEBHA UNIVERSITY   (Libyan Arab Jamahiriya)

^c KING SAUD UNIVERSITY   (Saudi Arabia)

Author keywords

Cassava bagasse; Cassava film; Hybrid composite; Physical properties; Sugar palm fiber; Thermal properties

Indexed keywords

BAGASSE; BIODEGRADATION; DYNAMICS; HYBRID MATERIALS; MECHANICAL PROPERTIES; PHYSICAL PROPERTIES; PLANTS (BOTANY); POLYMER MATRIX COMPOSITES; STARCH; TENSILE STRENGTH; THERMODYNAMIC PROPERTIES;

CASSAVA BAGASSE; CHEMICAL COMPOSITIONS; DYNAMIC MECHANICAL; DYNAMIC MECHANICAL PROPERTY; HYBRID COMPOSITE FILMS; HYBRID COMPOSITES; SUGAR PALM FIBER; WATER VAPOR PERMEABILITY;

COMPOSITE FILMS;

EID: 85032685937     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.12.4.7145-7160     Document Type: Article

References (44)

1. Abdallah, M., Zitoune, R., Collombet, F., and Bezzazi, B. (2010). "Study of mechanical and thermomechanical properties of jute/epoxy composite laminate," Journal of Reinforced Plastics and Composites 29(11), 1669-1680. DOI: 10.1177/0731684409341672
2. Bachtiar, D., Sapuan, S. M., and Hamdan, M. (2008). "The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites," Materials & Design 29(7), 1285-1290. DOI: 10.1016/j.matdes.2007.09.006
3. Bangyekan, C., Aht-Ong, D., and Srikulkit, K. (2006). "Preparation and properties evaluation of chitosan-coated cassava starch films," Carbohydrate Polymers 63(1), 61-71. DOI: 10.1016/j.carbpol.2005.07.032
4. Bonhomme, S., Cuer, A., Delort, A., Lemaire, J., Sancelme, M., and Scott, G. (2003). "Environmental biodegradation of polyethylene," Polymer Degradation and Stability 81(3), 441-452. DOI: 10.1016/S0141-3910(03)00129-0
5. Bonilla, J., Fortunati, E., Vargas, M., Chiralt, A., and Kenny, J. M. (2013). "Effects of chitosan on the physicochemical and antimicrobial properties of PLA films," Journal of Food Engineering 119(2), 236-243. DOI: 10.1016/j.jfoodeng.2013.05.026
6. Doporto, M. C., Dini, C., Mugridge, A., Viña, S. Z., and García, M. A. (2012). "Physicochemical, thermal and sorption properties of nutritionally differentiated flours and starches," Journal of Food Engineering 113(4), 569-576. DOI: 10.1016/j.jfoodeng.2012.07.021
7. Edhirej, A., Sapuan, S., Jawaid, M., and Zahari, N. I. (2017a). "Cassava/sugar palm fiber reinforced cassava starch hybrid composites: Physical, thermal and structural properties," International Journal of Biological Macromolecules 101, 75-83. DOI: 10.1016/j.ijbiomac.2017.03.045
8. Edhirej, A., Sapuan, S. M., Jawaid, M., and Zahari, N. I. (2017b). "Cassava: Its polymer, fiber, composite, and application," Polymer Composites 38(3 ), 555-570. DOI: 10.1002/pc.23614
9. Edhirej, A., Sapuan, S. M., Jawaid, M., and Zahari, N. I. (2017c). "Effect of various plasticizers and concentration on the physical, thermal, mechanical and structural properties of cassava starch based films," Starch-Stärke 69(1), 1-11. DOI:10.1002/star.201500366
10. Galdeano, M. C., Mali, S., Grossmann, M. V. E., Yamashita, F., and García, M. A. (2009). "Effects of plasticizers on the properties of oat starch films," Materials Science and Engineering: C 29(2), 532-538. DOI: 10.1016/j.msec.2008.09.034
11. Hachemane, B., Zitoune, R., Bezzazi, B., and Bouvet, C. (2013). "Sandwich composites impact and indentation behaviour study," Composites Part B: Engineering 51, 1-10. DOI: 10.1016/j.compositesb.2013.02.014
12. Ishak, M., Sapuan, S. M., Leman, Z., Rahman, M., and Anwar, U. (2012). Characterization of sugar palm (Arenga pinnata) fibres," Journal of Thermal Analysis and Calorimetry 109(2), 981-989. DOI: 10.1007/s10973-011-1785-1
13. Ishak, M., Sapuan, S. M., Leman, Z., Rahman, M., Anwar, U., and Siregar, J. (2013). "Sugar palm (Arenga pinnata): Its fibres, polymers and composites," Carbohydrate Polymers 91(2), 699-710. DOI: 10.1016/j.carbpol.2012.07.073
14. Jawaid, M., and Khalil, H. A. (2011). "Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review," Carbohydrate Polymers 86(1), 1-18. DOI: 10.1016/j.carbpol.2011.04.043
15. Jumaidin, R., Sapuan, S. M., Jawaid, M., Ishak, M., and Sahari, J. (2016). "Character-istics of thermoplastic sugar palm starch/agar blend: Thermal, tensile, and physical properties," International Journal of Biological Macromolecules 89, 575-581. DOI: 10.1016/j.ijbiomac.2016.05.028
16. Jumaidin, R., Sapuan, S. M., Jawaid, M., Ishak, M. R., and Sahari, J. (2017). "Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm starch/agar hybrid composites," International Journal of Biological Macromolecules 97, 606-615. DOI: 10.1016/j.ijbiomac.2017.01.079
17. Júnior, J. H. S. A., Júnior, H. L. O., Amico, S. C., and Amado, F. D. R. (2012). "Study of hybrid intralaminate curaua/glass composites," Materials & Design 42, 111-117. DOI: 10.1016/j.matdes.2012.05.044
18. Kishi, H., and Fujita, A. (2008). "Wood-based epoxy resins and the ramie fiber reinforced composites," Environmental Engineering and Management Journal 7(5), 517-523.
19. Leman, Z., Sapuan, S. M., Saifol, A., Maleque, M. A., and Ahmad, M. (2008). "Moisture absorption behavior of sugar palm fiber reinforced epoxy composites," Materials & Design 29(8), 1666-1670. DOI: 10.1016/j.matdes.2007.11.004
20. López, O. V., Castillo, L. A., García, M. A., Villar, M. A., and Barbosa, S. E. (2015). Food packaging bags based on thermoplastic corn starch reinforced with talc nanoparticles," Food Hydrocolloids 43, 18-24. DOI: 10.1016/j.foodhyd.2014.04.021
21. López, O. V., and García, M. A. (2012). "Starch films from a novel (Pachyrhizus ahipa) and conventional sources: Development and characterization," Materials Science and Engineering: C 32(7), 1931-1940. DOI: 10.1016/j.msec.2012.05.035
22. Mali, S., Grossmann, M. V. E., Garcia, M. A., Martino, M. N., and Zaritzky, N. E. (2002). "Microstructural characterization of yam starch films," Carbohydrate Polymers 50(4), 379-386. DOI: 10.1016/S0144-8617(02)00058-9
23. Mali, S., Sakanaka, L., Yamashita, F., and Grossmann, M. (2005). "Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect," Carbohydrate Polymers 60(3), 283-289. DOI: 10.1016/j.carbpol.2005.01.003
24. Mehta, N., and Parsania, P. (2006). "Fabrication and evaluation of some mechanical and electrical properties of jute-biomass based hybrid composites," Journal of Applied Polymer Science 100(3), 1754-1758. DOI: 10.1002/app.23014
25. Mohanty, S., Verma, S. K., and Nayak, S. K. (2006). "Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites," Composites Science and Technology 66(3), 538-547. DOI: 10.1016/j.compscitech.2005.06.014
26. Müller, C. M., Laurindo, J. B., and Yamashita, F. (2009). "Effect of cellulose fibers addition on the mechanical properties and water vapor barrier of starch-based films," Food Hydrocolloids 23(5), 1328-1333. DOI: 10.1016/j.foodhyd.2008.09.002
27. Munthoub, D. I., and Rahman, W. A. W. A. (2011). "Tensile and water absorption properties of biodegradable composites derived from cassava skin/polyvinyl alcohol with glycerol as plasticizer," Sains Malaysiana 40(7), 713-718.
28. Prachayawarakorn, J., Chaiwatyothin, S., Mueangta, S., and Hanchana, A. (2013). "Effect of jute and kapok fibers on properties of thermoplastic cassava starch composites," Materials & Design 47, 309-315. DOI: 10.1016/j.matdes.2012.12.012
29. Rao, H. R., Kumar, M. A., and Reddy, G. R. (2011). "Hybrid composites: Effect of fibers on mechanical properties," International Journal of Macromolecular Science 1(1), 9-14.
30. Razali, N., Salit, M. S., Jawaid, M., Ishak, M. R., and Lazim, Y. (2015). "A study on chemical composition, physical, tensile, morphological, and thermal properties of roselle fibre: Effect of fibre maturity," BioResources 10(1), 1803-1824. DOI: 10.15376/biores.10.1.1803-1824
31. Reddy, N., and Yang, Y. (2005). "Biofibers from agricultural byproducts for industrial applications," Trends in Biotechnology 23(1), 22-27. DOI: 10.1016/j.tibtech.2004.11.002
32. Rezaei, F., Yunus, R., and Ibrahim, N. A. (2009). "Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites," Materials & Design 30(2), 260-263. DOI: 10.1016/j.matdes.2008.05.005
33. Sahari, J., Sapuan, S. M., Ismarrubie, Z., and Rahman, M. (2012). "Physical and chemical properties of different morphological parts of sugar palm fibres," Fibres & Textiles in Eastern Europe 91(2), 21-24.
34. Sahari, J., Sapuan, S. M., Zainudin, E., and Maleque, M. (2013a). "Thermo-mechanical behaviors of thermoplastic starch derived from sugar palm tree (Arenga pinnata)," Carbohydrate Polymers 92(2), 1711-1716. DOI: 10.1016/j.carbpol.2012.11.031
35. Sahari, J., Sapuan, S. M., Zainudin, E., and Maleque, M. A. (2013b). "Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree," Materials & Design 49, 285-289. DOI: 10.1016/j.matdes.2013.01.048
36. Sahari, J., Sapuan, S. M., Zainudin, E. S., and Maleque, M. A. (2014). "Degradation characteristics of SPF/SPS biocomposites," Fibres & Textiles in Eastern Europe 22(5), 96-98.
37. Sanyang, Sapuan, S. M., Jawaid, M., Ishak, M., and Sahari, J. (2015a). "Effect of plasticizer type and concentration on dynamic mechanical properties of sugar palm starch based films," International Journal of Polymer Analysis and Characterization 20(7). 627-636.
38. Sanyang, Sapuan, S. M., Jawaid, M., Ishak, M. R., and Sahari, J. (2015b). "Effect of plasticizer type and concentration on tensile, thermal and barrier properties of biodegradable films based on sugar palm (Arenga pinnata) starch," Polymers 7(6), 1106-1124. DOI: 10.3390/polym7061106
39. Sanyang, M. L., Sapuan, S., Jawaid, M., Ishak, M. R., and Sahari, J. (2016). "Recent developments in sugar palm (Arenga pinnata) based biocomposites and their potential industrial applications: A review," Renewable and Sustainable Energy Reviews 54, 533-549. DOI: 10.1016/j.rser.2015.10.037
40. Shakuntala, O., Raghavendra, G., and Samir Kumar, A. (2014). "Effect of filler loading on mechanical and tribological properties of wood apple shell reinforced epoxy composite," Advances in Materials Science and Engineering 2014, 1-9. DOI: 10.1155/2014/538651
41. Thwe, M. M., and Liao, K. (2002). "Effects of environmental aging on the mechanical properties of bamboo-glass fiber reinforced polymer matrix hybrid composites," Composites Part A: Applied Science and Manufacturing 33(1), 43-52. DOI: 10.1016/S1359-835X(01)00071-9
42. Versino, F., and García, M. A. (2014). "Cassava (Manihot esculenta) starch films reinforced with natural fibrous filler," Industrial Crops and Products 58, 305-314. DOI: 10.1016/j.indcrop.2014.04.040
43. Versino, F., López, O. V., and García, M. A. (2015). "Sustainable use of cassava (Manihot esculenta) roots as raw material for biocomposites development," Industrial Crops and Products 65, 79-89. DOI: 10.1016/j.indcrop.2014.11.054
44. Yaich, H., Garna, H., Besbes, S., Paquot, M., Blecker, C., and Attia, H. (2011). "Chemical composition and functional properties of Ulva lactuca seaweed collected in Tunisia.," Food Chemistry 128(4), 895-901. DOI: 10.1016/j.foodchem.2011.03.114