The Theory of Critical Distances: A New Perspective in Fracture Mechanics

The Theory of Critical Distances: A New Perspective in Fracture Mechanics

Volumn , Issue , 2007, Pages 1-284

  Taylor, David ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85028668645     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-044478-9.X5000-5     Document Type: Book

References (371)

1. M.F. Ashby and D.R.H. Jones (2005) Engineering materials 1. Oxford UK: Elsevier
2. B. Atzori, P. Lazzarin and S. Filippi (2001) Cracks and notches: Analogies and differences of the relevant stress distributions and practical consequences in fatigue limit predictions. International Journal of Fatigue 23 355-362.
3. K.B. Broberg (1999) Cracks and fracture. London UK: Academic Press
4. A. Bruckner-Foit, X. Huang and Y. Motoyashiki (2004) Mesoscopic simulations of damage accumulation under fatigue loading. F. Nilsson,(Ed.) Proceedings of the 15th European Conference of Frac- ture Stockholm, Sweden: KTH 3-12.
5. M. Creager and P.C. Paris (1967) Elastic field equations for blunt cracks with reference to stress corrosion cracking. International Journal of Fracture Mechanics 3 247-252.
6. F. Delaire, J.L. Raphanel and C. Rey (2000) Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: Experimental study and finite element simulations. Acta Mater. 48 1075-1087.
7. S. Filippi and P. Lazzarin (2004) Distributions of the elastic principal stress due to notches in finite size plates and rounded bars uniaxially loaded. International Journal of Fatigue 26 377-391.
8. R.W. Hertzberg (1995) Deformation and fracture mechanics of engineering materials. New York USA: Wiley
9. G.R. Irwin (1964) Structural aspects of brittle fracture. Applied Materials Research 3 65-81.
10. M. Janssen, J. Zuidema and R. Wanhill (2002) Fracture mechanics. London UK: Spon
11. J.F. Knott (1973) Fundamentals of fracture mechanics. London: Butterworths
12. Y. Murakami (1987) Stress intensity factors handbook. Oxford UK: Pergamon
13. H. Neuber (1958) Theory of notch stresses: Principles for exact calculation of strength with reference to structural form and material. Berlin: Springer Verlag
14. P.C. Paris (1964) Fatigue — An interdisciplinary approach. Proc. 10th Sagamore Conference Syracuse, New York USA: Syracuse University Press 107-117.
15. R.E. Peterson (1974) Stress concentration factors. New York USA: Wiley
16. H.M. Westergaard (1939) Bearing pressures and cracks. Journal of Applied Mechanics A 49-53.
17. M.L. Williams (1952) Stress singularities resulting from various boundary conditions in angular corners of plates in extension. Journal of Applied Mechanics 19 526-528.
18. D.J. Wulpi (1985) Understanding how components fail. Ohio USA: ASM
19. D. Bellett, D. Taylor, S. Marco, E. Mazzeo and T. Pircher (2005) The fatigue behaviour of three-dimensional stress concentrations. International Journal of Fatigue 27 207-221.
20. P. Cornetti, N. Pugno, A. Carpinteri and D. Taylor (2006) A coupled stress and energy failure criterion. Engineering Fracture Mechanics 73 2021-2033.
21. H.M.H. El Haddad M.H., K.N. Smith and T.H. Topper (1979) Fatigue crack propagation of short cracks. Journal of Engineering Materials and Technology (Trans.ASME) 101 42-46.
22. S.A. Hitchen, S.L. Ogin, P.A. Smith and C. Soutis (1994) The effect of fibre length on fracture toughness and notched strength of short carbon fibre/epoxy composites. Composites 25 407-413.
23. A.J. Kinloch, S.J. Shaw and D.L. Hunston (1982) Crack propagation in rubber-toughened epoxy. International Conference on Yield, Deformation and Fracture, Cambridge London: Plastics and Rubber Institute 29.1-29.6.
24. A.J. Kinloch and J.G. Williams (1980) Crack blunting mechanisms in polymers. Journal of Materials Science 15 987-996.
25. M. Klesnil and P. Lukas (1980) Fatigue of metallic materials. Amsterdam: Elsevier
26. P. Lazzarin, R. Tovo and G. Meneghetti (1997) Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity. International Journal of Fatigue 19 647-657.
27. D. Leguillon (2002) Strength or toughness? A criterion for crack onset at a notch. European Journal of Mechanics A/Solids 21 61-72.
28. F.A. McClintock (1958) Ductile fracture instability in shear. Journal of Applied Mechanics 25 582-588.
29. F.A. McClintock and G.R. Irwin (1965) Plasticity aspects of fracture mechanics. ASTM STP 381 Fracture Toughness Testing and its Applications Philadelphia, USA: ASTM 84-113.
30. Y. Murakami (1987) Stress intensity factors handbook. Oxford, UK: Pergamon Press
31. H. Neuber (1936) Forschg.Ing.-Wes. 7 271-281.
32. H. Neuber (1958) Theory of notch stresses: Principles for exact calculation of strength with reference to structural form and material. Berlin: Springer Verlag
33. V.V. Novozhilov (1969) On a necessary and sufficient criterion for brittle strength. Prik.Mat.Mek. 33 201-210.
34. O.P. Ostash and V.V. Panasyuk (2001) Fatigue process zone at notches. International Journal of Fatigue 23 627-636.
35. R.E. Peterson (1938) Methods of correlating data from fatigue tests of stress concentration specimens. Stephen Timoshenko Anniversary Volume New York: Macmillan 179.
36. R.E. Peterson (1959) Notch-sensitivity. G. Sines, J.L. Waisman,(Eds) Metal Fatigue New York: McGraw Hill 293-306.
37. A. Seweryn and A. Lukaszewicz (2002) Verification of brittle fracture criteria for elements with V-shaped notches. Engineering Fracture Mechanics 69 1487-1510.
38. C.M. Sonsino, D. Radaj, U. Brandt and H.P. Lehrke (1999) Fatigue assessment of welded joints in A1Mg 4.5Mn aluminium alloy (AA 5083) by local approaches. International Journal of Fatigue 21 985-999.
39. K. Tanaka (1983) Engineering formulae for fatigue strength reduction due to crack-like notches. International Journal of Fracture 22 R39-R45.
40. D. Taylor (1999) Geometrical effects in fatigue: A unifying theoretical model. International Journal of Fatigue 21 413-420.
41. D. Taylor and P. Cornetti (2005) Finite fracture mechanics and the theory of critical distances. M.H. Aliabadi,(Eds) Advances in Fracture and Damage Mechanics IV Eastleigh UK: EC 565-570.
42. D. Taylor, P. Cornetti and N. Pugno (2005) The fracture mechanics of finite crack extension. Engineering Fracture Mechanics 72 1021-1038.
43. D. Taylor and G. Wang (2000) The validation of some methods of notch fatigue analysis. Fatigue and Fracture of Engineering Materials and Structures 23 387-394.
44. S. Usami, H. Kimoto, I. Takahashi and S. Shida (1986) Strength of ceramic materials containing small flaws. Engineering Fracture Mechanics 23 745-761.
45. M.E. Waddoups, J.R. Eisenmann and B.E. Kaminski (1971) Macroscopic fracture mechanics of advanced composite materials. Journal of Composite Materials 5 446-454.
46. J.M. Whitney and R.J. Nuismer (1974) Stress fracture criteria for laminated composites containing stress concentrations. Journal of Composite Materials 8 253-265.
47. G.I. Barenblatt (1959) The formation of equilibrium cracks during brittle fracture. General ideas and hypothesis, axially symmetric cracks. Prikl Mat Mekh 23 434-444.
48. Z.P. Bazant (2004) Quasibrittle fracture scaling and size effect. Materials and Structures 37 1-25.
49. F.M. Beremin (1983) A local criterion for cleavage fracture of a nuclear pressure vessel steel. Metallurgical Transactions A 14A 2277-2287.
50. T. Boukharouba, T. Tamine, L. Nui, C. Chehimi and G. Pluvinage (1995) The use of notch stress intensity factor as a fatigue crack initiation parameter. Engineering Fracture Mechanics 52 503-512.
51. A. Carpinteri, P. Cornetti, S. Barpi and S. Valente (2003) Cohesive crack model description of ductile to brittle size-scale transition: Dimensional analysis vs renormalization group theory. Engineering Fracture Mechanics 70 1809-1839.
52. D.S. Dugdale (1960) Yielding of steel sheets containing slits. Journal of the Mechanics and Physics of Solids 8 100-108.
53. A. Hillerborg, M. Modeer and P.E. Petersson (1976) Analysis of crack formation and crack growth in concreteby means of fracture mechanics and finite elements. Cement and Concrete Research 6 777-782.
54. S. Lawless and D. Taylor (1996) Prediction of fatigue failure in stress concentrators of arbitrary geometry. Engineering Fracture Mechanics 53 929-939.
55. B. Lawn (1993) Fracture of brittle solids. Cambridge: Cambridge University Press
56. P. Lazzarin, T. Lassen and P. Livieri (2003) A notch stress intensity approach applied to fatigue life predictions of welded joints with different local toe geometry. Fatigue and Fracture of Engineering Materials and Structures 26 49-58.
57. R.O. Ritchie, J.F. Knott and J.R. Rice (1973) On the relationship between critical tensile stress and fracture toughness in mild steel. Journal of the Mechanics and Physics of Solids 21 395-410.
58. R.A. Smith and K.J. Miller (1978) Prediction of fatigue regimes in notched components. Inter-national Journal of Mechanical Science 20 201-206.
59. D. Taylor (1996) Crack modelling: a technique for the fatigue design of components. Engineering Failure Analysis 3 129-136.
60. D. Taylor, A.J. Ciepalowicz, P. Rogers and J. Devlukia (1997) Prediction of fatigue failure in a crankshaft using the technique of crack modelling. Fatigue and Fracture of Engineering Materials and Structures 20 13-21.
61. W. Weibull (1939) The phenomenon of rupture in solids. Proceedings Royal Swedish Institute of Engineering Research 153 1-55.
62. M.L. Williams (1952) Stress singularities resulting from various boundary conditions in angular corners of plates in extension. Journal of Applied Mechanics 19 526-528.
63. K. Ando, B.A. Kim, M. Iwasa and N. Ogura (1992) Process zone size failure criterion and probabilistic fracture assessment curves for ceramics. Fatigue and Fracture of Engineering Materials and Structures 15 139-149.
64. Z.P. Bazant (2004) Quasibrittle fracture scaling and size effect. Materials and Structures 37 1-25.
65. R.L. Bertolotti (1973) Fracture toughness of polycrystalline alumina. Journal of the American Ceramic Society 56 107-117.
66. A. Bruckner-Foit, A. Heger and D. Munz (1996) On the contribution of notches to the failure probability of ceramic components. Journal of the European Ceramic Society 16 1027-1034.
67. A. Carpinteri and P. Cornetti (2002) Size effects on concrete tensile fracture properties: An interpretation of the fractal approach based on the aggregate grading. Journal of the Mechanical Behaviour of Materials 13 233-246.
68. W.G. Clark and W.A. Logsdon (1974) The applicability of fracture mechanics technology to porcelain ceramics. Symposium on Fracture Mechanics of Ceramics Vol.2 New York: Plenum 843-861.
69. P. Cornetti, N. Pugno and D. Taylor (2005) Strength predictions via finite fracture mechanics. Proceedings of the 11th International Conference on Fracture Turin, Italy: ESIS 73.
70. M. Creager and P.C. Paris (1967) Elastic field equations for blunt cracks with reference to stress corrosion cracking. International Journal of Fracture Mechanics 3 247-252.
71. R. Damani, R. Gstrein and R. Danzer (1996) Critical notch-root radius effect in SENB-S fracture toughness testing. Journal of the European Ceramic Society 16 695-702.
72. J.P. Dempsey, R.M. Adamson and S.V. Mulmule (1999) Scale effect on the in-situ tensile strength and failure of first-year sea ice at Resolute, NWR. International Journal of Fracture, special issue on fracture scaling 9-19.
73. D. Hertel, T. Fett and D. Munz (1998) Strength predictions for notched alumina specimens. Journal of the European Ceramic Society 18 329-338.
74. T. Hoshide and T. Inoue (1991) Simulation of anomalous behaviour of a small flaw in strength of engineering ceramics. Engineering Fracture Mechanics 38 307-312.
75. T. Hoshide, J. Murano and R. Kusaba (1998) Effect of specimen geometry on strength in engineering ceramics. Engineering Fracture Mechanics 59 655-665.
76. T. Ito and K. Hayashi (1991) Physical background to the breakdown pressure in hydraulic fracturing tectonic stress measurements. International Journal of Rock Mechanics and Mineral Science and Geomechanics Abstracts 28 285-293.
77. B.L. Karihaloo, H.M. Abdalla and Q.Z. Xiao (2003) Size effect in concrete beams. Engineering Fracture Mechanics 70 979-993.
78. W.P. Keith and K.T. Kedward (1997) Notched strength of ceramic-matrix composites. Compos-ites Science and Technology 57 631-635.
79. H. Kimoto, S. Usami and H. Miyata (1985) Relationship between strength and flaw size in glass and polycrystallline ceramics. Japanese Society of Mechanical Engineers 51–471 2482-2488.
80. E.Z. Lajtai (1972) Effect of tensile stress gradient on brittle fracture initiation. International Journal of Rock Mechanics and Mineral Science and Geomechanics Abstracts 9 569-578.
81. B. Lawn (1993) Fracture of brittle solids. Cambridge: Cambridge University Press
82. K. Minoshima, T. Terada and K. Komai (2000) Influence of nanometre-sized notch and water on the fracture behaviour of single crystal silicon microelements. Fatigue and Fracture of Engineering Materials and Structures 23 1033-1040.
83. N. Pugno and R. Ruoff (2004) Quantized fracture mechanics. Philosophical Magazine 84 2829-2845.
84. Z. Suo, S. Ho and X. Gong (1993) Notch ductile-to-brittle transition due to localised inelastic band. Journal of Engineering Materials and Technology 115 319-326.
85. I. Takahashi, S. Usami, H. Nakakado, H. Miyata and S. Shida (1985) Effect of defect size and notch root radius on fracture strength of engineering ceramics. Journal of the Ceramics Society of Japan 93 186-194.
86. Y. Taniguchi, J. Kitazumi and T. Yamada (1988) Bending stress analysis of ceramics based on the statistical theory of stress and fracture location. Journal of the Japanese Society of Materials Science 38–430 777-782.
87. D. Taylor and P. Cornetti (2005) Finite fracture mechanics and the theory of critical distances. M.H. Aliabadi,(Ed.) Advances in Fracture and Damage Mechanics IV Eastleigh UK: EC 565-570.
88. K. Tsuji, K. Iwase and K. Ando (1999) An investigation into the location of crack initiation sites in alumina, polycarbonate and mild steel. Fatigue and Fracture of Engineering Materials and Structures 22 509-517.
89. S. Usami, H. Kimoto, I. Takahashi and S. Shida (1986) K.N.Strength of ceramic materials containing small flaws. Engineering Fracture Mechanics 23 745-761.
90. F. Wang, X.L. Zheng and M.X. Lu (1995) Notch strength of ceramics and statistical analysis. Engineering Fracture Mechanics 52 917-921.
91. H.M. Westergaard (1939) Bearing pressures and cracks. Journal of Applied Mechanics A 49-53.
92. J.M. Whitney and R.J. Nuismer (1974) Stress fracture criteria for laminated composites containing stress concentrations. Journal of Composite Materials 8 253-265.
93. M.F. Yu, O. Lourie, M.J. Dyer, K. Moloni, T.F. Kelly and R. Ruoff (2000) Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science 287 637-640.
94. R. Yuan, J.J. Kruzic, X.F. Zhang, L.C. DeJonghe and R.O. Ritchie (2003) Ambient to high-temperature fracture toughness and cyclic fatigue behaviour in A1-containing silicon carbide ceramics. Acta Materialia 51 6477-6491.
95. Z. Zou, S.L. Fok, S.O. Oyadiji and B.J. Marsden (2004) Failure predictions for nuclear graphite using a continuum damage mechanics model. Journal of Nuclear Materials 324 116-124.
96. J.P. Berry (1961) Fracture processes in polymeric materials I. The surface energy of poly (methyl methacrylate). Journal of Polymer Science L 107-115.
97. J.P. Berry (1961) Fracture processes in polymeric materials II. The tensile strength of polystyrene. Journal of Polymer Science L 313-321.
98. A. Carpinteri and N. Pugno (2005) Fracture instability and limit strength condition in structures with re-entrant corners. Engineering Fracture Mechanics 72 1254-1267.
99. T. Culleton, P.J. Prendergast and D. Taylor (1993) Fatigue failure in the cement mantle of an artificial hip joint. Clinical Materials 12 95-102.
100. M. Elices, G.V. Guinea, F.J. Gomez and J. Planas (2002) The cohesive zone model: advantages, limitations and challenges. Engineering Fracture Mechanics 69 137-163.
101. N.A. Fleck, K.J. Kang and M.F. Ashby (1994) The cyclic properties of engineering materials. Acta Metall.Mater. 42 365-381.
102. F.J. Gomez and M. Elices (2003) Fracture of components with V-shaped notches. Engineering Fracture Mechanics 70 1913-1927.
103. F.J. Gomez, M. Elices and A. Valiente (2000) Cracking in PMMA containing U-shaped notches. Fatigue and Fracture of Engineering Materials and Structures 23 795-803.
104. J.L. Grenestedt, S. Hallestrom and J. Kuttenkeuler (1996) On cracks emanating from wedges in expanded PVC foam. Engineering Fracture Mechanics 54 445-456.
105. J.P.F. Inberg and R.J. Gaymans (2002) Polycarbonate and co-continuous polycarbonate/ABS blends: influence of notch radius. Polymer 43 4197-4205.
106. J.P.F. Inberg and R.J. Gaymans (2002) Polycarbonate and co-continuous polycarbonate/ABS blends: influence of specimen thickness. Polymer 43 3767-3777.
107. J.P.F. Inberg, A. Takens and R.J. Gaymans (2002) Strain rate effects in polycarbonate and polycarbonate/ABS blends. Polymer 43 2795-2802.
108. A.J. Kinloch and J.G. Williams (1980) Crack blunting mechanisms in polymers. Journal of Materials Science 15 987-996.
109. A.J. Kinloch and R.J. Young (1983) Fracture behaviour of polymers. London: Applied Science Publishers
110. A.J. Kinloch, S.J. Shaw and D.L. Hunston (1982) Crack propagation in rubber-toughened epoxy. International Conference on Yield, Deformation and Fracture, Cambridge London: Plastics and Rubber Institute 29.1-29.6.
111. A.J. Kinloch, S.J. Shaw and D.L. Hunston (1983) Deformation and fracture behaviour of a rubber-toughened epoxy: 2. Failure criteria. Polymer 24 1355-1363.
112. D. Leguillon (2002) Strength or toughness? A criterion for crack onset at a notch. European Journal of Mechanics A/Solids 21 61-72.
113. H. Nisitani and H. Hyakutake (1985) Condition for determining the static yield and fracture of a polycarbonate plate specimen with notches. Engineering Fracture Mechanics 22 359-368.
114. E. Plati and J.G. Williams (1975) Effect of temperature on the impact fracture toughness of polymers. Polymer 16 915-920.
115. A. Seweryn and A. Lukaszewicz (2002) Verification of brittle fracture criteria for elements with V-shaped notches. Engineering Fracture Mechanics 69 1487-1510.
116. D. Taylor, M. Merlo, R. Pegley and M.P. Cavatorta (2004) The effect of stress concentrations on the fracture strength of polymethylmethacrylate. Materials Science and Engineering A 382 288-294.
117. K. Tsuji, K. Iwase and K. Ando (1999) An investigation into the location of crack initiation sites in alumina, polycarbonate and mild steel. Fatigue and Fracture of Engineering Materials and Structures 22 509-517.
118. J.G. Williams (1984) Fracture mechanics of polymers. Chichester: Ellis Horwood
119. X.L. Zheng, H. Wang and J.H. Yan (2003) Notch strength and notch sensitivity of polymethyl methacrylate glasses. Materials Science and Engineering A.
120. K. Ando, K. Mogami and K. Tuji (1992) Probabilistic aspect of cleavage crack initiation sites and fracture toughness. Fatigue and Fracture of Engineering Materials and Structures 15 1171-1184.
121. F.M. Beremin (1983) A local criterion for cleavage fracture of a nuclear pressure vessel steel. Metallurgical Transactions A 14A 2277-2287.
122. M. Biel-Golaska (1998) Analysis of cast steel fracture mechanisms for different states of stress. sFatigue and Fracture of Engineering Materials and Structures 21 965-975.
123. S.I.L. British Standards Institute London (1991) BS 7448-1:1991 Fracture mechanics toughness tests — part 1 : Method for determination of Kic, critical CTOD and critical J values of metallic materials.
124. J.H. Chen, Q. Wang, G.Z. Wang and Z. Li (2003) Fracture behaviour at crack tip —A new framework for cleavage mechanism of steel. Acta Materialia 51 1841-1855.
125. M. Creager and P.C. Paris (1967) Elastic field equations for blunt cracks with reference to stress corrosion cracking. International Journal of Fracture Mechanics 3 247-252.
126. B.R. de Borst R. and J.C. Remmers (2004) Computational aspects of cohesive-zone models. F Nilsson,(Eds) The 15th European Conference of Fracture. Advanced Fracture Mechanics for Life and Safety Assessments Stockholm: KTH
127. R. Doglione and D. Firrao (2000) Inclusions effect on the notch behaviour of a low-alloy tempered steel. G. Pluvinage, M. Gjonaj,(Eds) Notch Effects in Fatigue and Fracture Dordrecht: Kluwer Academic Publishers 39-50.
128. S.F.F. Dos Santos F.F. and C. Ruggieri (2003) Micromechanics modelling of ductile fracture in tensile specimens using computational cells. Fatigue and Fracture of Engineering Materials and Structures 26 173-181.
129. M. Elices, G.V. Guinea, F.J. Gomez and J. Planas (2002) The cohesive zone model: advantages, limitations and challenges. Engineering Fracture Mechanics 69 137-163.
130. J. Faleskog, M. Kroon and H. Oberg (2004) A probabilistic model for cleavage fracture with a length scale —Parameter estimation and predictions of stationary crack experiments. Engineering Fracture Mechanics 71 57-79.
131. M. Geni and M. Kikuchi (1999) Void configuration under constrained deformation in ductile matrix materials. Computational Materials Science 16 391-403.
132. G.R. Irwin (1964) Structural aspects of brittle fracture. Applied Materials Research 3 65-81.
133. A.J. Kinloch and J.G. Williams (1980) Crack blunting mechanisms in polymers. Journal of Materials Science 15 987-996.
134. J.F. Knott (1973) Fundamentals of fracture mechanics. London: Butterworths
135. T. Lin, A.G. Evans and R.O. Ritchie (1986) A statistical model of brittle fracture by transgranular cleavage. Journal of the Mechanics and Physics of Solids 34 477-497.
136. A.C. Mackenzie, J.W. Hancock and D.K. Brown (1977) On the influence of state of stress on ductile fracture initiation in high strength steels. Engineering Fracture Mechanics 9 167-177.
137. M. Mantyla, A. Rossol, I. Nedbal, C. Prioul and B. Marini (1999) Fractographic observations of cleavage fracture initiation in a bainitic A508 steel. Journal of Nuclear Materials 264 257-262.
138. F.A. McClintock (1958) Ductile fracture instability in shear. Journal of Applied Mechanics 25 582-588.
139. A. Mirzaee, S. Hidadi-Moud, C.E. Truman and D.J. Smith (2004) Application of the local approach to predict brittle fracture following local compression. F. Nilsson,(Eds) The 15th European Confer- ence of Fracture — Advanced Fracture Mechanics for Life and Safety Assessments Stockholm: KTH
140. T. Moltubakk, C. Thaulow and Z.L. Zhang (1999) Application of local approach to inhomo-geneous welds. Influence of crack position and strength mismatch. Engineering Fracture Mechanics 62 445-462.
141. C. Moya, A. Martin-Meizoso and I. Ocana (2004) Micromechanisms of cleavage fracture in HAZ of C-Mn steel welds. F. Nilsson,(Eds) The 15th European Conference of Fracture. Advanced Fracture Mechanics for Life and Safety Assessments Stockholm: KTH
142. J.H. Mulherin, D.F. Armiento and H. Marcus (1963) Fracture characteristics of high strength aluminium alloys using specimens with variable notch root radii. ASME conference paper 63-WA-306 ASME (USA)
143. H. Neuber (1958) Theory of notch stresses: Principles for exact calculation of strength with reference to structural form and material. Berlin: Springer Verlag
144. T. Pardoen, I. Doghri and F. Delannay (1998) Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars. Acta Materialia 46 541-552.
145. R.O. Ritchie, B. Francis and W.L. Server (1976) Evaluation of toughness in AISI 4340 steel austenitised at low and high temperatures. Metallurgical Transactions 7A 831-838.
146. R.O. Ritchie and R.M. Horn (1978) Further considerations on the inconsistency in toughness eval-uation of AISI4340 steel austenitised at increasing temperatures. Metallurgical Transactions A 9A 331-339.
147. R.O. Ritchie, J.F. Knott and J.R. Rice (1973) On the relationship between critical tensile stress and fracture toughness in mild steel. Journal of the Mechanics and Physics of Solids 21 395-410.
148. R. Roberti, G. Silva, D. Firrao and B. DeBenedetti (1981) Influence of notch root radius on ductile rupture fracture toughness evaluation with Charpy-V type specimens. International Journal of Fatigue 3 133-141.
149. N. Schluter, F. Grimpe, W. Bleck and W. Dahl (1996) Modelling of the damage in ductile steels. Computational Materials Science 7 27-33.
150. A. Seweryn (1994) Brittle fracture criterion for structures with sharp notches. Engineering Frac-ture Mechanics 47 673-681.
151. W.O. Soboyejo, J.J. Lewandowski and R.O. Ritchie (2002) Mechanisms and mechanics of fracture. Warrendale, Pennsylvania, USA: TMS
152. K. Spencer, S.F. Corbin and D.J. Lloyd (2002) Notch fracture behaviour of 5754 automotive aluminium alloys. Materials Science and Engineering A 332 81-90.
153. M. Srinivas and S.V. Kamat (2000) Influence of temperature and notch root radius on the fracture toughness of a dispersion-strengthened aluminium alloy. Fatigue and Fracture of Engineering Materials and Structures 23 181-183.
154. M. Strandberg (2002) Fracture at V-notches with contained plasticity. Engineering Fracture Mechanics 69 403-415.
155. K. Tsuji, K. Iwase and K. Ando (1999) An investigation into the location of crack initiation sites in alumina, polycarbonate and mild steel. Fatigue and Fracture of Engineering Materials and Structures 22 509-517.
156. T.R. Wilshaw, C.A. Rau and A.S. Tetelman (1968) A general model to predict the elastic-plastic stress distribution and fracture strength of notched bars in plane strain bending. Engineering Fracture Mechanics 1 191-211.
157. O.M.L. Yahya, F. Borit, R. Piques and A. Pineau (1998) Statistical modelling of intergran-ular brittle fracture in a low alloy steel. Fatigue and Fracture of Engineering Materials and Structures 21 1485-1502.
158. T. Yokobori, A. Kamei and S. Konosu (1976) A criterion for low-stress brittle fracture of notched specimens based on combined micro-and macro fracture mechanics —I. Engineering Fracture Mechanics 8 397-409.
159. T. Yokobori and S. Konosu (1977) Effects of ferrite grain size, notch acuity and notch length on brittle fracture stress of notched specimens of low carbon steel. Engineering Fracture Mechanics 9 839-847.
160. X.L. Zheng (1989) On an unified model for predicting notch strength and fracture toughness of metals. Engineering Fracture Mechanics 33 685-695.
161. A. Afaghi-Khatibi, L. Ye and Y.W. Mai (1996) Evaluations of the effective crack growth and residual strength of fibre-reinforced metal laminates with a sharp notch. Composites Science and Technology 56 1079-1088.
162. L.M. Ahlstrom and J. Backlund (1992) Shape optimisation of openings in composite pressure vessels. Composite Structures 20 53-62.
163. A. Aktas and M.H. Dirikolu (2004) An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates. Composites Science and Technology 64 1605-1611.
164. M.L. Antti, E. Lara-Curzio and R. Warren (2004) Thermal degradation of an oxide fibre (Nextel 720) aluminosilicate composite. Journal of the European Ceramic Society 24 565-578.
165. J. Awerbuch and M.S. Madhukar (1985) Notched strength of composite laminates: Predictions and experiments —A review. Journal of Reinforced Plastics and Composites 4 3-159.
166. H.M.S. Belmonte, C.I.C. Manger, S.L. Ogin, P.A. Smith and R. Lewin (2001) Characterisa-tion and modelling of the notched tensile fracture of woven quasi-isotropic GFRP laminates. Composites Science and Technology 61 585-597.
167. W. Bonfield and P.K. Datta (1976) Fracture toughness of compact bone. Journal of Biomechanics 9 131-134.
168. F.K. Chang, R. Scott and G.S. Springer (1982) Strength of mechanically fastened composite joints. Journal of Composite Materials 16 470-494.
169. C.R. Clark, C. Morgan, D.A. Sonstegard and L.S. Matthews (1977) The effect of biopsy-hole shape and size on bone strength. Journal of Bone and Joint Surgery 59A 213-217.
170. K.D. Cowley and P.W.R. Beaumont (1997) Damage accumulation at notches and the fracture strss of carbon-fibre/polymer composites: combined effects of stress and temperature. Compos-ites Science and Technology 57 1211-1219.
171. K.D. Cowley and P.W.R. Beaumont (1997) Modelling problems of damage at notches and the fracture stress of carbon-fibre/polymer composites: matrix, temperature and residual stress effects. Composites Science and Technology 57 1309-1329.
172. J.D. Currey (2002) Bones. USA: Princeton University Press
173. S.P. Engelstad and R.L. Actis (2003) Development of p-version handbook solutions for analysis of composite bonded joints. Computers and mathematics with applications 46 81-94.
174. P.P.K. Govindan Potti P.K., R.B. Nageswara Rao B. and V.K. Srivastava (2000) Notched tensile strength for long-and short-fiber reinforced polyamide. Theoretical and Applied Fracture Mechanics 33 145-152.
175. K. Hollmann (1991) Failure analysis of a shear loaded graphite/epoxy beam containing an irregular cutout. Engineering Fracture Mechanics 39 159-175.
176. J.S. Huh and W. Hwang (1999) Fatigue life prediction of circular notched CRFP laminates. Composite Structures 44 163-168.
177. R.F. Karlak (1977) Hole effects in a related series of symmetrical laminates. Proceedings of failure modes in composites IV Chicago: The metallurgical society of AIME 105-117.
178. T.C. Kennedy, M.H. Cho and M.E. Kassner (2002) Predicting failure of composite structures containing cracks. Composites Part A 33 583-588.
179. O.A. Khondker, I. Herszberg and H. Hamada (2004) Measurements and prediction of the compression-after-impact strength of glass knitted textile composites. Composites Part A 35 145-157.
180. R.S. Lakes, S. Nakamura, J.C. Behiri and W. Bonfield (1990) Fracture mechanics of bone with short cracks. Journal of Biomechanics 23 967-975.
181. D. Leguillon, G. Marion, R. Harry and F. Lecuyer (2001) The onset of delamination at stress-free edges in angle-ply laminates —analysis of two criteria. Composites Science and Technology 61 377-382.
182. J.E. Lindhagen and L.A. Berglund (2000) Application of bridging-law concepts to short-fibre composites Part 2: Notch sensitivity. Composites Science and Technology 60 885-893.
183. R.H. Maa and J.H. Cheng (2002) A CDM-based failure model for predicting strength of notched composite laminates. Composites Part B 33 479-489.
184. J.W. Mar and K.Y. Lin (1977) Fracture mechanics correlation for tensile failure of filamentary composites with holes. Journal of Aircraft 14 703-704.
185. J.C. McNulty, M.Y. He and F.W. Zok (2001) Notch sensitivity of fatigue life in a Sylramic/SiC composite at elevated temperature. Composites Science and Technology 61 1331-1338.
186. K. Moholkar, D. Taylor, M. O'Reagan and G. Fenelon (2002) A biomechanical analysis of four different methods of harvesting bone-patellar tendon-bone graft in porcine knees. Journal of Bone and Joint Surgery 84A 1782-1787.
187. D.D. Moyle and A.J. Gavens (1986) Fracture properties of bovine tibial bone. Journal of Biomechanics 9 919-927.
188. N.K. Naik and V.K. Ganesh (1993) Optimum design studies on FRP beams with holes. Composite Structures 24 59-66.
189. A.B. Pereira, A.B. deMorais, A.T. Marques and P.T. deCastro (2004) Mode II interlaminar fracture of carbon/epoxy multidirectional laminates. Composites Science and Technology 64 1653-1659.
190. R.B. Pipes, R.C. Wetherhold and J.W. Gillespie (1979) Notched strength of composite materials. Journal of Composite Materials 12 148-160.
191. C.C. Poe and J.A. Sova (1980) Fracture toughness of boron/aluminum laminates with various proportions of 0 and 45 plies. Langley, NASA. NASA Technical Paper 1707 Ref Type: Report
192. K. Reifsnider, S. Case and J. Duthoit (2000) The mechanics of composite strength evolution. Composites Science and Technology 60 2539-2546.
193. I. Smith and S. Vasic (2003) Fracture behaviour of softwood. Mechanics of Materials 35 803-815.
194. E. Soriano and S. Almeida (1999) Notch sensitivity of carbon/epoxy fabric laminates. Composites Science and Technology 59 1143-1151.
195. S.C. Tan (1988) Mixed-mode fracture of notched composite laminates under uniaxial and multi-axial loading. Engineering Fracture Mechanics 31 733-746.
196. S. Vellaichamy, B.G. Prakash and S. Brun (1990) Optimum design of cutouts in laminated composite structures. Computers and Structures 37 241-246.
197. M.E. Waddoups, J.R. Eisenmann and B.E. Kaminski (1971) Macroscopic fracture mechanics of advanced composite materials. Journal of Composite Materials 5 446-454.
198. J. Wang, A. Banbury and D.W. Kelly (1998) Evaluation of approaches for determining design allowables for bolted joints in laminated composites. Composite Structures 41 167-176.
199. J. Wang, P.J. Callus and M.K. Bannister (2004) Experimental and numerical investigation of the tension and compression strength of un-notched and notched quasi-isotropic laminates. Composite Structures 64 297-306.
200. R.C. Wetherhold and M.A. Mahmoud (1986) Tensile strength of notched composite materials. Materials Science and Engineering 79 55-65.
201. J.M. Whitney, I.M. Daniel and R.B. Pipes (1982) Experimental Mechanics of Fiber Reinforced Composite Materials. Society for Experimental Stress Analysis Connecticut
202. J.M. Whitney and R.J. Nuismer (1974) Stress fracture criteria for laminated composites containing stress concentrations. Journal of Composite Materials 8 253-265.
203. T.J. Wu and H.T. Hahn (1998) The bearing strength of E-glass/vinyl-ester composites fabricated by VARTM. Composites Science and Technology 58 1519-1529.
204. X.W. Xu, H.C. Man and T.M. Yue (2000) Strength prediction of composite laminates with multiple elliptical holes. International Journal of Solids and Structures 37 2887-2900.
205. X.F. Yao, M.H. Kolstein, F.S.K. Bijlaard, W. Xu and M.Q. Xu (2003) Tensile strength and fracture of glass fiber-reinforced plastic (GFRP) plate with an eccentrically located circular hole. Polymer Testing 22 955-963.
206. T. Zetterberg, B.T. Astrom, J. Backlund and M. Burman (2001) On design of joints between composite profiles for bridge deck applications. Composite Structures 51 83-91.
207. S.Y. Zhang (1999) Micro-and macroscopic characterisations of the viscoelastic fracture of resin-based fibre composites. Composites Science and Technology 59 317-323.
208. H. Adib and G. Pluvinage (2003) Theoretical and numerical aspects of the volumetric approach for fatigue life prediction in notched components. International Journal of Fatigue 25 67-76.
209. Y. Akiniwa, K. Tanaka and L. Zhang (1996) Prediction of fatigue thresholds of notched components based on Resistance-curve method. G. Lutjering, H. Nowack,(Eds) Fatigue 96 Oxford, UK: Pergamon 449-454.
210. ASM (2002) Failure analysis and prevention. Ohio USA: ASM International
211. B. Atzori, P. Lazzarin and S. Filippi (2001) Cracks and notches: Analogies and differences of the relevant stress distributions and practical consequences in fatigue limit predictions. International Journal of Fatigue 23 355-362.
212. B. Atzori, G. Meneghetti and L. Susmel (2005) Material fatigue properties for assessing mechanical components weakened by notches and defects. Fatigue and Fracture of Engineering Materials and Structures 28 83-97.
213. C. Bathias and P.C. Paris (2005) Gigacycle fatigue in mechanical practice. New York USA: Dekker
214. S. Beretta, A. Blarasin, M. Endo, T. Giunti and Y. Murakami (1997) Defect tolerant design of automotive components. International Journal of Fatigue 19 319-333.
215. M.D. Chapetti, T. Kitano, T. Tagawa and T. Miyata (1998) Fatigue limit of blunt-notched components. Fatigue and Fracture of Engineering Materials and Structures 21 1525-1536.
216. N.E. Dowling (1979) Notched member fatigue life predictions combining crack initiation and propagation. Fatigue of Engineering Materials and Structures 2 129-138.
217. D.L. DuQuesnay, T.H. Topper and M.T. Yu (1986) The effect of notch radius on the fatigue notch factor and the propagation of short cracks. K.J. Miller, E.R. delosRios,(Eds) The Behaviour of Short Fatigue Cracks (EGF1) London: MEP 323-335.
218. H.M.H. El Haddad M.H., K.N. Smith and T.H. Topper (1979) Fatigue crack propagation of short cracks. Journal of Engineering Materials and Technology (Trans. ASME) 101 42-46.
219. H.M.H. El Haddad M.H., T.H. Topper and K.N. Smith (1979) Prediction of non propagating cracks. Engineering Fracture Mechanics 11 573-584.
220. W. Elber (1970) Fatigue crack closure under cyclic tension. Engineering Fracture Mechanics 2 37-45.
221. W. Elber (1971) The significance of fatigue crack closure. Damage Tolerance in Aircraft Structures (ASTM STP 486) ASTM 230-242.
222. N.E. Frost (1960) Notch effects and the critical alternating stress required to propagate a crack in an aluminium alloy subject to fatigue loading. Journal of Mechanical Engineering Science 2 109-119.
223. N.E. Frost and D.S. Dugdale (1957) Journal of the Mechanics and Physics of Solids 5 182-192.
224. N.E. Frost, K.J. Marsh and L.P. Pook (1974) Metal fatigue. London: Oxford University Press
225. Y. Fujimoto, K. Hamada, E. Shintaku and G. Pirker (2001) Inherant damage zone model for strength evaluation of small fatigue cracks. Engineering Fracture Mechanics 68 455-473.
226. R.W. Hertzberg and J.A. Manson (1980) Fatigue of engineering plastics. London: Academic Press
227. J.S. Huh and W. Hwang (1999) Fatigue life prediction of circular notched CRFP laminates. Composite Structures 44 163-168.
228. P.E. Irving and C.J. Beevers (1974) Microstructural influences on fatigue crack growth in Ti-6Al-4V. Materials Science and Engineering 14 229-238.
229. S.P. James, M. Jasty, J. Davies, H. Piehler and W.H. Harris (1992) A fractographic investigation of PMMA bone cement focusing on the relationship between porosity reduction and increased fatigue life. Journal of Biomedical Materials Research 26 651-662.
230. A.P. Kfouri (1997) Limitations on the use of the stress intensity factor, K, as a fracture parameter in the fatigue propagation of short cracks. Fatigue and Fracture of Engineering Materials and Structures 20 1687-1698.
231. H. Kitagawa and S. Takahashi (1976) Application of fracture mechanics to very small cracks or the cracks in the early stage. Second International Conference on Mechanical Behaviour of Materials ASM 627-630.
232. M. Klesnil and P. Lukas (1980) Fatigue of metallic materials. Amsterdam: Elsevier
233. J. Lankford (1982) The growth of small fatigue cracks in 7075-T6. Fatigue of Engineering Materials and Structures 5 233-248.
234. D. Lanning, T. Nicholas and G.K. Haritos (2005) On the use of critical distance theories for the prediction of the high cycle fatigue limit stress in notched Ti-6Al-4V. International Journal of Fatigue 27 45-57.
235. S. Lawless and D. Taylor (1996) Prediction of fatigue failure in stress concentrators of arbitrary geometry. Engineering Fracture Mechanics 53 929-939.
236. P. Lazzarin, R. Tovo and G. Meneghetti (1997) Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity. International Journal of Fatigue 19 647-657.
237. P. Livieri and R. Tovo (2004) Fatigue limit evaluation of notches, small cracks and defects: An engineering approach. Fatigue and Fracture of Engineering Materials and Structures 27 1037-1049.
238. P. Lukas, L. Kunz, B. Weiss and R. Stickler (1986) Non-damaging notches in fatigue. Fatigue and Fracture of Engineering Materials and Structures 9 195-204.
239. K.Y.G. McCullough, N.A. Fleck and M.F. Ashby (2000) The stress-life fatigue behaviour of aluminium alloy foams. Fatigue and Fracture of Engineering Materials and Structures 23 199-208.
240. A.J. McEvily, M. Endo and Y. Murakami (2003) On the root-area relationship and the short fatigue crack threshold. Fatigue and Fracture of Engineering Materials and Structures 26 269-278.
241. A.J. McEvily and S. Ishihara (2001) On the dependence of the rate of fatigue crack growth on the Sna (2a) parameter. International Journal of Fatigue 23 115-120.
242. J.C. McNulty, M.Y. He and F.W. Zok (2001) Notch sensitivity of fatigue life in a Sylramic/SiC composite at elevated temperature. Composites Science and Technology 61 1331-1338.
243. K.J. Miller and R. Akid (1996) The application of microstructural fracture mechanics to various metal surface states. Proceedings of the Royal Society of London 452 1411-1432.
244. Y. Murakami (2002) Metal fatigue: Effects of small defects and nonmetallic inclusions. Oxford: Elsevier
245. H. Neuber (1958) Theory of notch stresses: principles for exact calculation of strength with reference to structural form and material. Berlin: Springer Verlag
246. O.P. Ostash and V.V. Panasyuk (2001) Fatigue process zone at notches. International Journal of Fatigue 23 627-636.
247. O.P. Ostash, V.V. Panasyuk and E.M. Kostyk (1999) A phenomenologic al model of fatigue macrocrack initiation near stress concentrators. Fatigue and Fracture of Engineering Materials and Structures 22 161-172.
248. S. Pearson (1975) Initiation of fatigue cracks in commercial aluminium alloys and the subsequent propagation of very short cracks. Engineering Fracture Mechanics 7 235-247.
249. R.E. Peterson (1959) Notch-sensitivity. G. Sines, J.L. Waisman,(Eds) Metal Fatigue New York: McGraw Hill 293-306.
250. G. Pluvinage (1998) Fatigue and fracture emanating from notch; the use of the notch stress intensity factor. Nuclear Engineering and Design 185 173-184.
251. SAE (1997) Fatigue design handbook. Warrendale USA: Society of Automotive Engineers
252. E. Siebel and M. Stieler (1955) Dissimilar stress distributions and cyclic loading. Z.Ver.Deutsch.Ing 97 121-131.
253. R.A. Smith and K.J. Miller (1978) Prediction of fatigue regimes in notched components. Inter-national Journal of Mechanical Science 20 201-206.
254. C.M. Sonsino (2003) Fatigue design of structural ceramic parts by the example of automotive intake and exhaust valves. International Journal of Fatigue 25 107-116.
255. R.I. Stephens and H.O. Fuchs (2001) Metal fatigue in engineering. New York: Wiley
256. R.W. Suhr (1986) The effect of surface finish on high cycle fatigue of a low alloy steel. K.J. Miller, E.R. delosRios,(Eds) The Behaviour of Short Fatigue Cracks (EGF1) London: MEP 69-86.
257. S. Suresh (1998) Fatigue of materials. Cambridge UK: Cambridge University Press
258. L. Susmel and D. Taylor (2003) Fatigue design in the presence of stress concentrations. Inter-national Journal of Strain Analysis 38 443-452.
259. L. Susmel and D. Taylor (2005) The theory of critical distances to predict fatigue lifetime of notched components. M.H. Aliabadi,(Eds) Advances in Fracture and Damage Mechanics IV Eastleigh UK: EC 411-416.
260. B. Tabernig and R. Pippan (1998) Resistance curves for the threshold of fatigue crack propagation. In. Fatigue Design 98 127-134.
261. K. Tanaka (1983) Engineering formulae for fatigue strength reduction due to crack-like notches. International Journal of Fracture 22 R39-R45.
262. K. Tanaka and Y. Nakai (1983) Propagation and non-propagation of short fatigue cracks. Fatigue and Fracture of Engineering Materials and Structures 6 315-327.
263. D. Taylor (1996) Crack modelling: a technique for the fatigue design of components. Engineering Failure Analysis 3 129-136.
264. D. Taylor (1999) Geometrical effects in fatigue: a unifying theoretical model. International Journal of Fatigue 21 413-420.
265. D. Taylor, A.J. Ciepalowicz, P. Rogers and J. Devlukia (1997) Prediction of fatigue failure in a crankshaft using the technique of crack modelling. Fatigue and Fracture of Engineering Materials and Structures 20 13-21.
266. D. Taylor and O.M. Clancy (1991) The fatigue performance of machined surfaces. Fatigue and Fracture of Engineering Materials and Structures 14 329-336.
267. D. Taylor and D. Hoey (2006) The role of defects in the fatigue strength of bone cement. Proc. Fatigue 1906 Atlanta, USA
268. D. Taylor, M. Hughes and D. Allen (1996) Notch fatigue behaviour in cast irons explained using a fracture mechanics approach. International Journal of Fatigue 18 439-445.
269. D. Taylor and J.F. Knott (1981) Fatigue crack propagation behaviour of short cracks: The effect of microstructure. Fatigue of Engineering Materials and Structures 4 147-155.
270. D. Taylor and M. O'Donnell (1994) Notch geometry effects in fatigue: A conservative design approach. Engineering Failure Analysis 1 275-287.
271. D. Taylor and G. Wang (1999) A critical distance approach which unifies the prediction of fatigue limits for large and small cracks and notches. Proc. Fatigue 99 Warley, UK: Higher Education Press(China) and EMAS 579-584.
272. D. Taylor and G. Wang (2000) The validation of some methods of notch fatigue analysis. Fatigue and Fracture of Engineering Materials and Structures 23 387-394.
273. S. Usami and S. Shida (1979) Elastic-plastic analysis of the fatigue limit for a material with small flaws. Fatigue of Engineering Materials and Structures 1 471-481.
274. C. Vallellano, J. Dominguez and A. Navarro (2003) On the estimation of fatigue failure under fretting conditions using notch methodologies. Fatigue and Fracture of Engineering Materials and Structures 26 469-478.
275. C. Vallellano, A. Navarro and J. Dominguez (2000) Fatigue crack growth threshold conditions at notches. Part 1:Theory. Fatigue and Fracture of Engineering Materials and Structures 23 113-121.
276. C. Vallellano, A. Navarro and J. Dominguez (2000) Fatigue crack growth threshold conditions at notches. Part II: Generalisation and application to experimental results. Fatigue and Fracture of Engineering Materials and Structures 23 123-128.
277. J.M. Whitney and R.J. Nuismer (1974) Stress fracture criteria for laminated composites containing stress concentrations. Journal of Composite Materials 8 253-265.
278. M. Yatomi, N.P. O'Dowd, K.M. Nikbin and G.A. Webster (2006) Theoretical and numerical modelling of creep crack growth in a carbon-manganese steel. Engineering Fracture Mechanics 73 1158-1175.
279. L.G. Zhao, N.P. O'Dowd and E.P. Busso (2006) A coupled kinetic-constitutive approach to the study of high temperature crack initiation in single crystal nickel-base superalloys. Journal of the Mechanics and Physics of Solids 54 288-309.
280. B. Alfredsson and M. Olsson (1999) Standing contact fatigue. Fatigue and Fracture of Engi-neering Materials and Structures 22 225-237.
281. B. Alfredsson and M. Olsson (2003) Inclined standing contact fatigue. Fatigue and Fracture of Engineering Materials and Structures 26 589-602.
282. J.A. Araujo and D. Nowell (1999) Analysis of pad size effects in fretting fatigue using short crack arrest methodologies. International Journal of Fatigue 21 947-956.
283. J.A. Araujo, L. Susmel, D. Taylor, J.T.C. Ferro and E.N. Mamiya (2006) On the use of the theory of critical distances and the modified Wohler curve method to estimate fretting fatigue strength of cylindrical contacts. International Journal of Fatigue 29 95-107.
284. M. Ciavarella (2003) A 'crack-like' notch analogue for a safe-life fretting fatigue design metho-dology. Fatigue and Fracture of Engineering Materials and Structures 26 1159-1170.
285. S. Faanes and G. Harkegard (1994) Simplified stress intensity factors in fretting fatigue. R.B. Waterhouse, T.C. Lindley,(Eds) Fretting Fatigue ESIS 18 London: Mechanical Engineering Publications 73-81.
286. N.A. Fleck, K.J. Kang and J.A. Williams (1996) The machining of sintered bronze. International Journal of Mechanical Science 38 141-155.
287. S. Fouvry, P. Kapsa and L. Vincent (2000) A multiaxial fatigue analysis of fretting contact taking into account the size effect. D. Hoeppner, V. Chandrasekaran, C.B. Elliot,(Eds) Fretting fatigue: Current Technology and Practices ASTM STP 1367 West Conshohoken, PA, USA: ASTM 167-182.
288. M.F. Frolish, D.I. Fletcher and J.H. Beynon (2002) A quantitative model for predicting the morphology of surface initiated rolling contact fatigue cracks in back-up roll steels. Fatigue and Fracture of Engineering Materials and Structures 25 1073-1086.
289. A.E. Giannakopoulos, T.C. Lindley and S. Suresh (1998) Aspects of equivalence between contact mechanics and fracture mechanics: theoretical connections and a life-prediction metho-dology for fretting-fatigue. Acta Materialia 46 2955-2968.
290. A.E. Giannakopoulos, T.A. Venkatesh, T.C. Lindley and S. Suresh (1999) The role of adhesion in contact fatigue. Acta Materialia 47 4653-4664.
291. S. Glodez, Z. Ren and J. Flasker (1999) Surface fatigue of gear teeth flanks. Computers and Structures 73 475-483.
292. T. Hattori and M. Nakamura (1994) Fretting fatigue evaluation using stress singularity parameters at contact edges. R.B. Waterhouse, T.C. Lindley,(Eds) Fretting Fatigue, ESIS 18 London: Mechanical Engineering Publications 453-460.
293. H. Hertz (1895) Gesammelte Werke Vol.1 Leipzig, Germany.
294. T. Kimura and K. Sato (2003) Simplified method to determine contact stress distribution and stress intensity factors in fretting fatigue. International Journal of Fatigue 25 633-640.
295. Y. Kondo and M. Bodai (2001) The fretting fatigue limit based on local stress at the contact edge. Fatigue and Fracture of Engineering Materials and Structures 24 791-801.
296. B. Lawn (1993) Fracture of brittle solids. Cambridge: Cambridge University Press
297. T.C. Lindley (1997) Fretting fatigue in engineering alloys. International Journal of Fatigue 19 S39-S49.
298. C.D. Lykins, S. Mall and V. Jain (2001) A shear stress-based parameter for fretting fatigue crack initiation. Fatigue and Fracture of Engineering Materials and Structures 24 461-473.
299. S.A. Namjoshi, S. Mall, V.K. Jain and O. Jin (2002) Fretting fatigue crack initiation mechanism in Ti-6Al-4V. Fatigue and Fracture of Engineering Materials and Structures 25 955-965.
300. C. Navarro, M. Garcia and J. Dominguez (2003) A procedure for estimating the total life in fretting fatigue. Fatigue and Fracture of Engineering Materials and Structures 26 459-468.
301. K.J. Nix and T.C. Lindley (1985) The application of fracture mechanics to fretting fatigue. Fatigue and Fracture of Engineering Materials and Structures 8 143-160.
302. K. Tanaka, Y. Mutoh, S. Sakoda and G. Leadbeater (1985) Fretting fatigue in 0.55C spring steel and 0.45C carbon steel. Fatigue and Fracture of Engineering Materials and Structures 8 129-142.
303. C. Vallellano, J. Dominguez and A. Navarro (2003) On the estimation of fatigue failure under fretting conditions using notch methodologies. Fatigue and Fracture of Engineering Materials and Structures 26 469-478.
304. Williams (1994) Engineering tribology. Oxford: Oxford Science Publishers
305. S.A. Hopper, R.K. Schneider, M.H. Ratzlaff, K.K. White and C.H. Johnson (1998) Effect of pin hole size and number on the in vitro bone strength in the equine radius loaded in torsion. American Journal of Veterinary Research 59 201-204.
306. J.W. Hutchinson (2000) Plasticity at the micron scale. International Journal of Solids and Struc-tures 37 225-238.
307. T.M. Maccagno and J.F. Knott (1989) The fracture behaviour of PMMA in mixed modes I and II. Engineering Fracture Mechanics 34 65-86.
308. Y. Murakami (2002) Metal fatigue: Effects of small defects and nonmetallic inclusions. Oxford: Elsevier
309. I.V. Papadopoulos (1998) Critical plane approaches in high-cycle fatigue: On the definition of the ampitude and mean value of the shear stress acting on the critical plane. Fatigue and Fracture of Engineering Materials and Structures 21 269-285.
310. G. Quilafku, N. Kadi, J. Dobranski, Z. Azari, M. Gjonaj and G. Pluvinage (2001) Fatigue specimens subjected to combined loading. Role of hydrostatic pressure. International Journal of Fatigue 23 689-701.
311. K.L. Seltzer, S.M. Stover, K.T. Taylor and N.H. Willits (1996) The effect of hole diameter on the torsional mechanical properties of the equine third metacarpal bone. Veterinary Surgery 25 371-375.
312. A. Seweryn (1998) A non-local stress and strain energy release rate mixed mode fracture initiation and propagation criteria. Engineering Fracture Mechanics 59 737-760.
313. A. Seweryn and A. Lukaszewicz (2002) Verification of brittle fracture criteria for elements with V-shaped notches. Engineering Fracture Mechanics 69 1487-1510.
314. D.J. Smith, M.R. Ayatollahi and M.J. Pavier (2001) The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading. Fatigue and Fracture of Engineering Materials and Structures 24 137-150.
315. T.E. Specht, G.J. Miller and P.T. Colahan (1990) Effects of clustered drill holes on the breaking strength of the equine third metacarpal bone. American Journal of Veterinary Research 51 1242-1246.
316. S. Suresh (1998) Fatigue of materials. Cambridge UK: Cambridge University Press
317. L. Susmel (2004) A unifying approach to estimate the high-cycle fatigue strength of notched components subjected to both uniaxial and multiaxial cyclic loadings. Fatigue and Fracture of Engineering Materials and Structures 27 391-411.
318. L. Susmel and P. Lazzarin (2002) A biparametric wohler curve for high cycle multiaxial fatigue assessment. Fatigue and Fracture of Engineering Materials and Structures 25 63-78.
319. L. Susmel and D. Taylor (2003) Two methods for predicting the multiaxial fatigue limits of sharp notches. Fatigue and Fracture of Engineering Materials and Structures 26 821-833.
320. L. Susmel and D. Taylor (2006) On the use of the conventional high-cycle multiaxial fatigue criteria reinterpreted in terms of the theory of critical distances. Proceedings of Fatigue 2006 Atlanta USA
321. D. Taylor and L. Susmel (2004) La teoria delle distanze critiche per la stima del limite di fatica a torsione di componenti intagliati. G. Demelio,(Ed.) Proc. XIV ADM-XXXIII AIAS Bari: AIAS 235-236.
322. B. Atzori, P. Lazzarin and R. Tovo (1999) From a local stress approach to fracture mechanics: A comprehensive evaluation of the fatigue strength of welded joints. Fatigue and Fracture of Engineering Materials and Structures 22 369-381.
323. Z.P. Bazant (2004) Quasibrittle fracture scaling and size effect. Materials and Structures 37 1-25.
324. D. Bellett and D. Taylor (2006) The effect of crack shape on the fatigue limit of three-dimensional stress concentrations. International Journal of Fatigue 28 114-123.
325. D. Bellett, D. Taylor, S. Marco, E. Mazzeo and T. Pircher (2005) The fatigue behaviour of three-dimensional stress concentrations. International Journal of Fatigue 27 207-221.
326. F.M. Beremin (1983) A local criterion for cleavage fracture of a nuclear pressure vessel steel. Metallurgical Transactions A 14A 2277-2287.
327. M. Braccini, M. Dupeux and D. Leguillon (2005) Initiation of failure in a single lap joint. A Carpinteri,(Eds) Proceedings of the 11th International Conference on Fracture Turin, Italy: ESIS 86.
328. A. Carpinteri, B. Chiaia and P. Cornetti (2002) A scale-invarianty cohesive crack model for quasi-brittle materials. Engineering Fracture Mechanics 69 207-217.
329. A. Carpinteri, B. Chiaia and P. Cornetti (2003) On the mechanics of quasi-brittle materials with a fractal microstructure. Engineering Fracture Mechanics 70 2321-2349.
330. A. Carpinteri and P. Cornetti (2002) Size effects on concrete tensile fracture properties: An interpretation of the fractal approach based on the aggregate grading. Journal of the Mechanical Behaviour of Materials 13 233-246.
331. V. Chaves (2002) Use of simplified models in fatigue prediction of components with stress concentrations. Dublin: MSc Trinity College
332. V. Crupi, G. Crupi, E. Guglielmino and D. Taylor (2005) Fatigue assessment of welded joints using critical distance and other methods. Engineering Failure Analysis 12 129-142.
333. T.R. Gurney (1979) Fatigue of welded structures. Cambridge UK: Cambridge University Press
334. P. Lazzarin, T. Lassen and P. Livieri (2003) A notch stress intensity approach applied to fatigue life predictions of welded joints with different local toe geometry. Fatigue and Fracture of Engineering Materials and Structures 26 49-58.
335. P. Lazzarin and P. Livieri (2001) Notch stress intensity factors and fatigue strength of aluminium and steel welded joints. International Journal of Fatigue 23 225-232.
336. P. Livieri and P. Lazzarin (2005) Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values. International Journal of Fracture 133 247-276.
337. A. Muller, J. Hohe and W. Beckler (2005) On the evaluation of interfacial crack initiation by means of finite fracture mechanics. A. Carpinteri,(Eds) Proceedings of the 11th International Conference on Fracture Turin, Italy: ESIS 407.
338. E. Niemi (1995) Stress determination for fatigue analysis of welded components. Cambridge, UK: Abington Publishing
339. D. Radaj (1990) Design and analysis of fatigue resistant welded structures. Cambridge UK: Abington Publishing
340. S. Ribeiro-Ayeh and S. Hallestrom (2003) Strength prediction of beams with bi-material butt-joints. Engineering Fracture Mechanics 70 1491-1507.
341. C.M. Sonsino, D. Radaj, U. Brandt and H.P. Lehrke (1999) Fatigue assessment of welded joints in AlMg 4.5Mn aluminium alloy (AA 5083) by local approaches. International Journal of Fatigue 21 985-999.
342. L. Susmel and R. Tovo (2006) Local and structural multiaxilal stress states in welded joints under fatigue loading. International Journal of Fatigue 28 564-575.
343. K. Tanaka, H. Okajima and K. Koibuchi (2002) Fatigue strength CAE system for three-dimensional welded structures. Fatigue and Fracture of Engineering Materials and Structures 25 275-282.
344. D. Taylor (1985) A compendium of fatigue threshold and growth rates. Warley, UK: EMAS
345. D. Taylor (2000) Scaling effects in the fatigue strength of bones from different animals. Journal of Theoretical Biology 206 299-307.
346. D. Taylor (2005) Analysis of fatigue failures in components using the theory of critical distances. Engineering Failure Analysis 12 906-914.
347. D. Taylor, N. Barrett and G. Lucano (2002) Some new methods for predicting fatigue in welded joints. International Journal of Fatigue 24 509-518.
348. D. Taylor, P. Bologna and K.K. Bel Knani K. (2000) Prediction of fatigue failure location on a component using a critical distance method. International Journal of Fatigue 22 735-742.
349. D. Taylor, A.J. Ciepalowicz, P. Rogers and J. Devlukia (1997) Prediction of fatigue failure in a crankshaft using the technique of crack modelling. Fatigue and Fracture of Engineering Materials and Structures 20 13-21.
350. D. Taylor and J. Li (1993) Sourcebook on fatigue crack propagation: Thresholds and crack closure. Warley, UK: EMAS
351. M. Toyosada, K. Gotoh and T. Niwa (2004) Fatigue life assessment for welded structures without initial defects: An algorithm for predicting fatigue crack growth from a sound site. International Journal of Fatigue 26 993-1002.
352. S. Wiersma, F. Dolan and D. Taylor (2006) Fatigue and fracture of materials used for micro-scale biomedical components. Bio-medical Materials and Engineering 16 137-146.
353. S. Wiersma and D. Taylor (2005) Fatigue of material used in microscopic components. Fatigue and Fracture of Engineering Materials and Structures 28 1153-1160.
354. H. Adib and G. Pluvinage (2003) Theoretical and numerical aspects of the volumetric approach for fatigue life prediction in notched components. International Journal of Fatigue 25 67-76.
355. Z.P. Bazant (2004) Quasibrittle fracture scaling and size effect. Materials and Structures 37 1-25.
356. A. Blom, A. Hedlund, W. Zhao, W.B. Fathulla Weiss B. and R. Stickler (1986) Short fatigue crack growth behaviour in Al2024 and Al7475. K.J. Miller, E.R. delosRios,(Eds) The Behaviour of Short Fatigue Cracks (EGF1) London: MEP 37-66.
357. K.B. Broberg (1999) Cracks and fracture. San Diego, California, USA: Academic Press
358. J.P. Dempsey, R.M. Adamson and S.V. Mulmule (1999) Scale effect on the in-situ tensile strength and failure of first-year sea ice at Resolute, NWR. International Journal of Fracture, special issue on fracture scaling 9-19.
359. D.L. DuQuesnay, T.H. Topper and M.T. Yu (1986) The effect of notch radius on the fatigue notch factor and the propagation of short cracks. K.J. Miller, E.R. delosRios,(Eds) The Behaviour of Short Fatigue Cracks (EGF1) London: MEP 323-335.
360. J.G. Hazenberg, D. Taylor and T.C. Lee (2006) Mechanisms of short crack growth at constant stress in bone. Biomaterials 27 2114-2122.
361. A.J. Kinloch, S.J. Shaw, D.A. Tod and D.L. Hunston (1983) Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies. Polymer 24 1341-1354.
362. B. Lawn (1993) Fracture of brittle solids. Cambridge: Cambridge University Press
363. S.E. Mikhailov (1995) A functional approach to non-local strength conditions and fracture criteria. Engineering Fracture Mechanics 52 731-754.
364. R.K. Nalla, J.H. Kinney and R.O. Ritchie (2003) Mechanistic fracture criteria for the failure of human cortical bone. Nature Materials 2 164-168.
365. R.K. Nalla, J.J. Kruzic, J.H. Kinney and R.O. Ritchie (2005) Mechanistic aspects of fracture and R-curve behaviour in human cortical bone. Biomaterials 26 217-231.
366. N. Pugno and R. Ruoff (2004) Quantized fracture mechanics. Philosophical Magazine 84 2829-2845.
367. Y. Qiao and A.S. Argon (2003) Cleavage cracking resistance of high angle grain boundaries in Fe-3%Si alloy. Mechanics of Materials 35 313-331.
368. N. Schluter, F. Grimpe, W. Bleck and W. Dahl (1996) Modelling of the damage in ductile steels. Computational Materials Science 7 27-33.
369. L. Susmel and D. Taylor (2005) The theory of critical distances to predict fatigue lifetime of notched components. M.H. Aliabadi,(Eds) Advances in Fracture and Damage Mechanics IV Eastleigh UK: EC 411-416.
370. D. Taylor (2001) A mechanistic approach to critical-distance methods in notch fatigue. Fatigue and Fracture of Engineering Materials and Structures 24 215-224.
371. D. Taylor, P. Cornetti and N. Pugno (2005) The fracture mechanics of finite crack extension. Engineering Fracture Mechanics 72 1021-1038.