Material fatigue properties for assessing mechanical components weakened by notches and defects

Fatigue and Fracture of Engineering Materials and Structures

Volumn 28, Issue 1-2, 2005, Pages 83-97

  Atzori, B ^a   Meneghetti, G ^a   Susmel, L ^b  

^a UNIVERSITY OF PADOVA   (Italy)

^b UNIVERSITY OF FERRARA   (Italy)

Author keywords

El Haddad's short crack constant; Plain fatigue limit

Indexed keywords

ALUMINUM ALLOYS; CARBON STEEL; CAST IRON; COMPONENTS; CRACKS; DATABASE SYSTEMS; DEFECTS; STRESS INTENSITY FACTORS; TENSILE STRESS;

EL HADDAD'S SHORT CRACK CONSTANT; HIGH ALLOY STEEL; LOW ALLOY STEEL; PLAIN FATIGUE LIMIT;

FATIGUE OF MATERIALS;

EID: 12844283448     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2004.00862.x     Document Type: Article

References (98)

1. Lukas, P. and Klesnil, M. (1978) Fatigue limit of notched bodies. Mate. Sci. Engng 34, 61-66.
2. Tanaka, K. and Nakai, Y. (1983) Propagation and nonpropagation of short fatigue cracks at a sharp notch. Fatigue Fract. Engng Mater. Struct. 6, 315-327.
3. Smith, R. A. and Miller, tCJ. (1978) Prediction of fatigue regimes in notched components. Int. J. Mech. Sci. 20, 201-206.
4. Miller, K.J. (1982) The short crack problem. Fatigue Fract. Engng Mater. Struct. 5, 223-232.
5. Nisitani, H. and Endo, M. (1988) Unified treatment of deep and shallow notches in rotating bending fatigue. In: Basic Questions in Fatigue (Edited by J. T. Fong and R. J. Fields). Vol. 1, ASTM STP 924. American Society for Testing and Materials, Philadelphia, PA, pp. 136-153.
6. Taylor, D. (2001) A mechanistic approach to critical distance methods in notch fatigue. Fatigue Fract. Engng Mater. Struct. 24, 215-224.
7. Murakami, Y. (2002) Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions. Elsevier, Oxford, UK.
8. Yates, J. R. and Brown. M. W. (1987) Prediction of the length of non-propagating fatigue cracks. Fatigue Fract. Engng Mater. Struct. 10, 187-201.
9. El Haddad, M. H., Topper, T. H. and Smith, K. N. (1979) Fatigue crack propagation of short cracks. J. Engng Mater. Tech. (ASME Trans.) 101, 42-45.
10. Peterson, R. E. (1959) Notch sensitivity. In: Metal Fatigue (Edited by G. Sines and J. L. Waisman). MacGraw-Hill New York, pp. 293-306.
11. Neuber, H. (1958) Theory of Notch Stresses. Springer Publishers, Berlin.
12. Tanaka, K. (1983) Engineering formulae for fatigue strength reduction due to crack-like notches. Int. J. Fract. 22, R39-R45.
13. Lazzarin, E, Tovo, R. and Meneghetti, G. (1997) Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity. Int. J. Fatigue 19, 647-657.
14. Taylor, D. (1999) Geometrical effects in fatigue: A unifying theoretical model. Int. J. Fatigue 21, 413-420.
15. Atzori, B., Lazzarin, P. and Meneghetti, G. (2002) Interpretation of fatigue limit of materials based on micromechanics. In: Proceedings of the 8th International Fatigue Congress (Edited by A.E Bloom). EMAS, Cradley Heath, West Midlands, UK, pp. 1873-1880.
16. Bueckner, H. F. (1970) A novel principle for the computation of stress intensity factors. Z. Ange. Meth. Mech 50, 529-546.
17. Kitagawa, H. and Takahashi, S. (1976) Applicability of fracture mechanics to very small cracks in the early stage. In: Proceedings of 2nd International Conference on Mechanical Behaviour of Materials. pp. 627-631.
18. Atzori, B. and Lazzarin, P. (2000) Notch sensitivity and defect sensitivity under fatigue loading: Two sides of the same medal. Int. J. Fract. 107, L3-L8.
19. Atzori, B., Lazzarin, P. and Meneghetti, G. (2003) Fracture mechanics and notch sensitivity. Fatigue Fract. Engng Mater. Struct. 26 257-267.
20. Ciavarella, M. and Meneghetti, G. (2004) On fatigue limit in the presence of notches: Classical vs recent unified formulations. Int. J. Fatigue 26, 289-298.
21. Susmel, L. and Taylor, D. (2003) Two methods for predicting the multiaxial fatigue limits of sharp notches. Fatigue Fract. Engng Mater. Struct. 26, 821-833.
22. Susmel, L. and Lazzarin, P. (2002) A bi-parametric modified Wöhler curve for high cycle multiaxial fatigue assessment. Fatigue Fract. Engng Mater. Struct. 25, 63-78.
23. Lazzarin, P. and Susmel, L. (2003) A stress-based method to predict lifetime under multiaxial fatigue loadings. Fatigue Fract. Engng Mater. Struct. 26, 1171-1187.
24. Susmel, L. (2004) A unifying approach to estimate the high-cycle fatigue strength of notched components subjected to both uniaxial and multiaxial cyclic loadings. Fatigue Fract. Engng Mater. Struct. 27, 391-411.
25. Fuchs, H. O. and Stephens, R. I. (1980) Metal Fatigue in Engineering J. Wiley & Sons, New York.
26. Anon. (1996) Data Book on Fatigue Strength of Metallic Materials. JSMS, Elsevier.
27. Boller, C. and Seeger, T. (1987) Materials Data for Cyclic Loading Elsevier, Oxford.
28. Gasparini, E. and Meneghetti, G. (2002) Una banca dati sul comportamento a fatica delle ghise sferoidali austemperate. La Metall. Italiana 3, 357-366 (in Italian).
29. Papadopoulos, I. V., et al. (1997) A comparative study of multiaxial high-cycle fatigue criteria for metals. Int. J. Fatigue 19, 219-235.
30. Carpinteri, A. and Spagnoli, A. (2001) Multiaxial high-cycle fatigue criterion for hard metals. Int. J. Fatigue 23, 135-145.
31. Nishihara, T. and Kawamoto, M. (1945) The strength of metals under combined alternating bending and torsion with phase difference. Memoirs of the College of Engineering, Kyoto Imperial University, Vol. 11, pp. 85-112.
32. Achtelik, H., Jakubowska, I. and Macha, E. (1983) Actual and estimated directions of fatigue fracture plane in ZI250 grey cast iron under combined alternating bending and torsion. Studia Geot. et Mech. V2, 9-30.
33. Zenner, H., Heidenreich, R. and Richter, I. (1985) Dauerschwingfestigkeit bei nichtsynchroner mehrachsiger beanspruchung. Z. Werkstoffech 16, 101-112.
34. Froustey, C. and Laserre, S. (1989) Multiaxial fatigue endurance of 30NCD16 steel. Int. J. Fatigue 11, 169-175.
35. Simbürger, A. (1975) Festigkeitverhalten zähler Werkstoffe bei einer Mehrachsigen, Phasenverscobenen Schwingbeanspruchung mit Köroperfesten Hauptspannungsrichtungen. LBF Bericht Nr. FB-121, Darmstad, Germany.
36. Findley, W. N., Coleman, J. J. and Hanley, B. C. (1956) Theory for combined bending and torsion fatigue with data for SAE 4340 steel. In: Proceedings of International Conference on Fatigue of Metals. Institution of Mechanical Engineers, London, pp. 150-157.
37. Kurath, P., Downing, S. D. and Galliart, D. R. (1989) Summary of non-hardened notched shaft round robin program. In: Multiaxial Fatigue. SAE AE-14, pp. 13-32.
38. Laserre, S. and Froustey, C. (1992) Multiaxial fatigue of steel-testing out-of-phase and in blocks: Validity and applicability of some criteria. Int. J. Fatigue 14, 113-120.
39. Palin-Luc, T. and Lasserre, S. (1998) An energy based criterion for high cycle multiaxial fatigue. Eur. 7. Mech. A/Solids 17, 237-251.
40. McDiarmid, D. L. (1985) Fatigue under out-of-phase biaxial stresses of different frequencies. In: Multiaxial Fatigue (Edited by K. M. Miller and M. W. Brown). ASTM STP 853 pp. 497-513.
41. Papadopoulos, I. V. (1995) A high-cycle fatigue criterion applied in biaxial and triaxial out-of-phase stress conditions. Fatigue Fract. Engng Mater. Struct. 18, 79-91.
42. Crossland, B. (1956) Effect of large hydroscopic pressures on the torsional fatigue strength of an alloy steel. In: Proceedings of International Conference on Fatigue of Metals. pp. 138-149.
43. Issler, L. (1973) Festigkeitsverhalten metallischer Wekstoffe bei mehrachsiger phasenverschobener Schwingbeanspruchung. Dissertation, Universität Stuttgard.
44. Gough, H. J. (1949) Engineering steels under combined cyclic and static stresses. In: Proceedings of Institute of Mechanical Engineers 160, 417-440.
45. McDiarmid, D. L. (1994) A shear stress based critical-plane criterion of multiaxial fatigue failure for design and life prediction. Fatigue Fract. Engng Mater. Struct. 17, 1475-1484.
46. Kitaioka, S., Chen, J. and Seika, M. (1986) The threshold of micro crack propagation under mixed mode. Bull. JSME 29, 214-237.
47. Ros, M. (1950) Die Bruchegefahr fester Koper. EMPA Bericht 173 Zurich.
48. Frith, P. H. (1956) Fatigue of wrought high-tensile alloy steel. In: Proceedings of International Conferance on Fatigue of Metals. Institution of Mechanical Engineers, pp. 462-499.
49. Smith, R. A. (1981) Fatigue thresholds: A design engineer's guide through the jungle. In: Fatigue Thresholds (Edited by J. Bäcklund, A. F. Blom and C. J. Beevers), Stockholm.
50. Taylor, D. and Jianchum, L. (1993) Sourcebook on Fatigue Crack Propagation. Warley: EMAS.
51. DuQuesnay, D. L., et al. (1986) The effect of notch radius on the fatigue notch factor and the propagation of short cracks. In: The Behaviour of Short Fatigue Cracks (Edited by K. J. Miller and E. R. de los Rios). EGF Pub. 1, London pp. 323-335.
52. Chaves, V. Department of Mechanical Engineering, University of Seville, Seville, Spain. Personal Communication.
53. Atzori, B., Meneghetti, G. and Susmel, L. (2004) Fatigue behaviour of AA356-T6 aluminium cast alloy weakened by cracks and notches. Eng. Fract. Mech. 71, 759-768.
54. Frost, N. E. (1957) Non-propagating cracks in V-notched specimens subjected to fatigue loading. Aeoronaut. Quart. VIII, 1-20.
55. Ostash, O. P. and Panasyuk, V. V. (2001) Fatigue process zone at notches. Int. J. Fatigue 23, 627-636.
56. Stanzl-Tschegg, S. E. and Mayer, H. (2001) Fatigue and fatigue crack growth of aluminium alloys at very high numbers of cycles. Int. J. Fatigue 23, S231-S237.
57. Fujimoto, Y., Hamada, K., Shintaku, E. and Pirker, G. (2001) Inherent damage zone model for strength evaluation of small fatigue cracks. Eng. Fract. Mech. 68, 455-473.
58. Blom, A. E, et al. (1986) Short fatigue crack growth behaviour in Al 2024 and Al 7075. In: The Behaviour of Short Fatigue Cracks (Edited by K. J. Miller and E. R. de los Rios). EGF Pub. 1, London, pp. 37-66.
59. Plumtree, A. and Schafer, S. (1986) Intitiation and short crack behaviour in alluminium alloy casting. In: The Behaviour of Short Fatigue Cracks (Edited by K. J. Miller and E. R. de los Rios). EGF Pub. I, London, pp. 215-227
60. El Haddad, M. H. and Miettinen, B. I. (1981) Prediction of initiation and early fatigue crack growth in materials. In: Fatigue Thresholds (Edited by J. Backlund, et al.). Vol. II, London, pp. 827-844.
61. Sedyuk, V. A., et al. (1997) Influence of cryogenic temperatures and medias on fatigue resistance of Al-Li alloy. In: Advances in Fracture Research (Edited by B. L. Karihaloo, et al.). ICF 9, Vol. 3, Oxford: Pergamon, 1629-1635.
62. McEvily, A. J. (1996) Fatigue crack thresholds. In: ASM Handbook, Fatigue and Fracture. Vol. 19, pp. 134-152.
63. Newman, J. C., et al. (1999) Fatigue life prediction methodology using small-crack theory. Int. J. Fatigue 21, 109-119.
64. Luise, M. (2001) Degree Thesis 'Caratterizzazione a fatica di leghe leggere in presenza di intagli'. University of Padova. Italy.
65. Ochi, Y., et al. (2002) High cycle fatigue strength and fatigue crack characteristics in semi-liquid die casting aluminium alloy. In: Proceedings of the 8th International Fatigue Congress (Edited by A. F. Blom). Vol. 4, Cradley Heath, West Midlands, UK, pp. 2657-2664.
66. Taylor, D., Hughest, M. and Allen, D. (1996) Notch fatigue behaviour in cast irons explained using a fracture mechanics approach. Int. J. Fatigue 18, 439-445.
67. Clement, P., et al. (1984) Short crack behaviour in nodular cast iron. Fatigue Engng Mar. Struct. 7, 251-265.
68. Usami, S. (1987) Short crack fatigue properties and component life estimation. In: Current Research on Fatigue Cracks (Edited by T. Tanaka, et al.). Elsevier Applied Scince, London, pp. 119-147.
69. Gasparini, E. (2001) Degree Thesis 'Caratterizzazione meccanica delle ghise sferoidali austemperate'. University of Padova, Italy.
70. Frost, N. E. (1957) A relation between the critical alternating propagation stress and crack length for mild steel. In: Proceedings of Institute of Mechanical Engineers. Vol. 173, pp. 811-834.
71. Lukas, P., Kunz, L., Weiss, B. and Stickler, R. (1986) Non-damaging notches in fatigue. Fatigue Fract. Engng Mater. Struct. 9, 195-204.
72. Nisitani, H. and Endo, M. (1988) Unified treatment of deep and shallow notches in rotating bending. In: Basic Questions in Fatigue. (Edited by J. T. Fong and R. J. Fields). Vol. 1, ASTM STP 924, Philadelphia, pp. 136-153.
73. El Haddad, M. H. (1978) Ph.D. Thesis 'A study of the growth of short fatigue cracks based on fracture mechanics'. University of Waterloo, Waterloo, Ontario, Canada.
74. Akiniwa, Y., Tanaka, K., Kimura, H. and Ishikawa, T. (2002) Fatigue crack propagation behaviour in ultrafine-grained steel. In: Proceedings of the 8th International Fatigue Congress (Edited by A. F. Blom). Vol. I, Cradley Heath, West Midlands, UK, pp. 473-480.
75. Glodez, S., et al. (2002) A computational model for determination of service life of gears. Int. J. Fatigue 24, 1013-1020.
76. Shang, D. G., Yao, W. X. and Wang, D. J. (1998) A new approach to the determination of fatigue crack initiation size. Int. J. Fatigue 20, 683-687.
77. Makkonen, M. (2001) Statistical size effect in the fatigue limit of steel. Int. J. Fatigue 23, 395-402.
78. Fujimoto, Y., Hamada, K., Shintaku, E. and Pirker, G. (2001) Inherent damage zone model for strength evaluation of small fatigue cracks. Eng. Fract. Mech. 68, 455-473.
79. Lukas, P. and Kunz, L. (1992) Effect of mean stress on short crack threshold. In: Short Fatigue Cracks (Edited by K. J. Miller and L. De Los Rios). ESIS 13 Mechanical Engineering Publisher, London, pp. 265-275.
80. Weiss, B., et al. (1979) High cycle fatigue and threshold behaviour of powered metallurgical Mo and Mo-alloys. Fatigue Engng Mater. Struct. 2, 73-84.
81. Shu, C. M., et al. (1985) Fatigue microcracks in a low carbon steel. Fatigue Engng Mater. Struct. 8, 193-208.
82. Legris, L., et al. (1981) The effect of cold rolling on the fatigue properties of a SAE 1010 steel. In: Proceedings of FATIGUE 81 (Edited by F. Sherratt and J. B. Sturegeon). pp. 97-105.
83. Ogura, K., et al. (1987) Fatigue crack growth and closure of small cracks at the notch root. In: Current Research on Fatigue Cracks (Edited by T. Tanaka, et al.). Elsevier Applied Science, London, pp. 67-91.
84. Tanaka, K. (1987) Short-crack fracture mechanics in fatigue conditions. In: Current Research on Fatigue Cracks (Edited by T. Tanaka, et al.). Elsevier Applied Science, London, pp. 93-117.
85. Nakai, Y. and Ohji, K. (1992) Predictions of growth rate and closure of short fatigue cracks. In: Fatigue Cracks (Edited by K. J. Miller and E. R. de los Rios). ESIS 13, pp. 169-189.
86. El Haddad, M. H. and Miettinen, B. I. (1981) Prediction of initiation and early fatigue crack growth in materials. In: Fatigue Thresholds (Edited by J. Backlund, et al.). Vol. II, pp. 827-844.
87. Harkegard, G. (1981) An effective stress intensity factor and the determination of the notch fatigue limit. La: Fatigue Thresholds (Edited by J. Backlund, et al.). Vol. II, pp. 867-879.
88. Knott, J. F. (1997) Fatigue design in engineering materials. In: Advances in Fracture Research (Edited by B. L. Karihaloo, et al. . ICF 9, Vol. 3, Oxford: Pergamon pp. 1213-1224.
89. Chua-Yau, C. and Da-Xing, G. (1983) Fatigue crack propagation in a cast magnesium alloy. Fatigue Engng Mater. Struct. 6, 167-176.
90. Usami, S. and Shida, S. (1979) Elastic-plastic analysis of the fatigue limit for a material with small flaws. Fatigue Fract. Engng Mater. Struct. 1, 471-481.
91. th. In: Fatigue Thresholds (Edited by J. Backlund, et al. . Vol. II, Chameleon Press, London, pp. 1051-1068.
92. Tokaji, K., Ogawa, T. and Harada, Y. (1986) The growth of small fatigue cracks in a low carbon steel. The effect of microstructure and limitation of linear elastic fracture mechanics. Fatigue Fract. Engng Mater. Struct. 9, pp. 205-217.
93. Gach, E., et al. (2002) Fatigue behaviour of pre-damaged high-strength steels. In: Proceedings of the 8th International Fatigue Congress (Edited by A. F. Blom) Vol. 1, Cradley Heath, West Midlands, UK, pp. 489-498.
94. Torres, Y., Anglada, M. and Llanes, L. (2002) Fatigue limit - Fatigue crack growth threshold correlation for hard metals: Influence of microstructure. In: Proceeding of 8th International Fatigue Congress (Edited by A. F. Blom). Cradley Heath, West Midlands, UK, pp. 1171-1177.
95. Beretta, S. and Matteazzi, S. (1996) Short crack propagation in eutectoid steel wires. Int. J. Fatigue 18, 451-456.
96. Tokaji, K., et al. (1986) Limitations of linear elastic fracture mechanics in respect of small fatigue cracks and microstructure. Fatigue Engug Mater. Struct. 9, 1-14.
97. Liaw, P. K., Yang, C. Y., Palusamy, S. S. and Ren, W. (1997) Fatigue crack initiation and propagation behaviour of pressure vessel steels. Eng. Fract. Mech. 57, 85-105.
98. Taylor, D. (1989) Fatigue Thresholds. Butterworth & Co. (Publishers) Ltd., Borough Green, Sevenoaks Kent TN15 8 PH, England.