HEAT EXCHANGERS: Selection, Rating, and Thermal Design: Third Edition

Heat Exchangers: Selection, Rating, and Thermal Design: Third Edition

Volumn , Issue , 2012, Pages 1-607

  Kakaç, Sadik ^a   Liu, Hongtan ^a   Pramuanjaroenkij, Anchasa ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85010213457     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b11784     Document Type: Book

References (508)

1. Hewitt, G. F., Shires, G. L., and Bott, T. R., Process Heat Transfer, CRC Press, Boca Raton, FL, 1994.
2. Shah, R. K., Classification of heat exchangers, in Heat Exchangers-Thermo-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., John Wiley and Sons, New York, 1981.
3. Lin, Z. H., Thermohydraulic design of fossil-fuel boiler components, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 1991.
4. Butterworth, D., Steam power plant and process condensers, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 1991.
5. Butterworth, D., Condensers and their design, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988.
6. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, 7th ed., New York, 1988.
7. Alfa Laval, Heat Exchanger Guide, S. 22101, Lund 1, Sweden, 1980.
8. HTFS Plate-Fin Study Group, Plate-Fin Heat Exchangers-Guide to Their Specifications and Use, Taylor, M. A., Ed., HTFS, Oxfordshire, UK, 1987.
9. Pate, M. B., Evaporators and condensers for refrigeration and air-conditioning systems, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 1991.
10. Pate, M. B., Design considerations for air-conditioning evaporators and condenser coils, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988.
11. Collier, J. G., Evaporators, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer Publishers, The Netherlands, 1988.
12. American Petroleum Institute, Air Cooled Heat Exchangers for General Refinery Service, API Standard 661, Washington, DC, 1986.
13. Shah, R. K. and Sekulić, D. P., Fundamentals of Heat Exchanger Design, John Wiley and Sons, New York, 2003.
14. Mayinger, F., Classification and applications of two-phase flow heat exchangers, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds, Kluwer Publishers, The Netherlands, 1988.
15. Kitto, J. B., Jr. and Albrecht, M. J., Fossil-fuel-fired boilers: fundamentals and elements, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 1991.
16. Stultz, S. C. and Kitto, J. B., Steam, its Generation and Use, Babcock and Wilcox, New York, 1992.
17. Sclünder, E. U. et al., Eds., Heat Exchanger Design Handbook, Hemisphere, Washington, DC, 1988.
18. Smith, R. A., Vaporizers-Selection, Design and Operation, John Wiley and Sons, New York, 1986.
19. Bell, K. J., Preliminary design of shell and tube heat exchangers, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, DC, 1981.
20. Shah, R. K., Classification of heat exchangers, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, DC, 1981, 9.
21. Chenoweth, J. M. and Impagliazzo, M., Eds., Fouling in Hot Exchange Equipment, ASME Symposium, Volume HTD-17, ASME, New York, 1981.
22. Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Low Reynolds Number Flow Heat Exchangers, Hemisphere, Washington, DC, 1981, 21.
23. Kakaç, S., Shah, R. K., and Aung, W., Eds., Handbook of Single Phase Convective Heat Transfer, John Wiley and Sons, New York, 1987, Ch. 4, 18.
24. Kern, D. Q. and Kraus, A. D., Extended Surface Heat Transfer, McGraw-Hill, New York, 1972.
25. Padet, J., Echangeurs Thermiques, Masson, Paris, France, 1994.
26. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, 7th ed., New York, 1988.
27. Bowman, R. A., Mueller, A. C., and Nagle, W. M., Mean temperature difference in design, Trans. ASME, 62, 283, 1940.
28. Kays, W. M. and London, A. L., Compact Heat Exchangers, 3rd ed., McGraw-Hill, New York, 1984.
29. Shah, R. K. and Mueller, A. C., Heat exchangers, in Handbook of Heat Transfer Applications, Rohsenow, W. M., Hartnett, J. P., and Gani, E. N., Eds., McGraw-Hill, New York, 1985, Ch. 4.
30. Kays, W. M., London, A. L., and Johnson, K. W., Gas Turbine Plant Heat Exchangers, ASME, New York, 1951.
31. Walker, G., Industrial Heat Exchanger. A Basic Guide, Hemisphere, Washington, DC, 1990.
32. Butterworth, D., Condensers: thermohydraulic design, in Heat Exchangers:Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, DC, 1981, 547.
33. Colburn, A. P., Mean temperature difference and heat transfer coefficient in liquid heat exchangers, Ind. Eng. Chem., 25, 873, 1933.
34. Shah, R. K., Heat exchanger design methodology - an overview, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, DC, 1981, 455.
35. Bell, K. J., Overall design methodology for shell-and-tube exchangers, in Heat Transfer Equipment Design, Shah, R. K., Subbarao, E. C., and Mashelkar, R. A., Eds., Hemisphere, Washington, DC, 1988, 131.
36. Shah, R. K. and Sekulić, D. P., Fundamentals of Heat Exchanger Design, John Wiley and Sons, New York, 2003.
37. Shah, R. K. and London, A. L., Laminar Forced Convection in Ducts, Academic Press, New York, 1978.
38. Shah, R. K. and Bhatti, M. S., Laminar convective heat transfer in ducts, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 3.
39. Gnielinski, V., Forced convection ducts, in Heat Exchanger Design Handbook, Schlünder, E. U., Ed., Hemisphere, Washington, DC, 1983, 2.5.1-2.5.3.
40. Hausen, H., Neue Gleichungen für die Warmeübertragung bei freier oder erzwungener Strömung, Allg. Wärmetech., 9, 75, 1959.
41. Kakaç, S., Laminar forced convection in the combined entrance region of ducts, in Natural Convection: Fundamentals and Applications, Kakaç, S., Aung, W., and Viskanta, R., Eds., Hemisphere, Washington, DC, 1985, 165.
42. Pohlhausen, E., Der Wärmeaustausch Zwischen festen Körpern und Flüssigkeiten mit Kleiner Reibung und Kleiner Wärmeleitung, Z. Angew. Math. Mech., 1, 115, 1921.
43. Delorenzo, B. and Anderson, E. D., Heat transfer and pressure drop of liquids in double pipe fintube exchangers, Trans. ASME, 67, 697, 1945.
44. Stephan, K., Warmeübergang und Druckabfall bei nichtausgebildeter Laminar Stömung in Rohren und ebenen Spalten, Chem. Ing. Tech., 31, 773, 1959.
45. Deissler, R. G., Analytical investigation of fully developed laminar flow in tubes with heat transfer with fluid properties variable along the radius, NACA TN 2410, 1951.
46. Yang, K. T., Laminar forced convection of liquids in tubes with variable viscosity, J. Heat Transfer, 84, 353, 1962.
47. Sieder, E. N. and Tate, G. E., Heat transfer and pressure drop of liquids in tubes, Ind. Eng. Chem., 28, 1429, 1936.
48. Whitaker, S., Forced convection heat-transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and flow in packed beds and tube bundles, AIChE J., 18, 361, 1972.
49. Oskay, R. and Kakaç, S., Effect of viscosity variations on turbulent and laminar forced convection in pipes, METU J. Pure Appl. Sci., 6, 211, 1973.
50. Kuzneltsova, V. V., Convective heat transfer with flow of a viscous liquid in a horizontal tube (in Russian), Teploenergetika, 19(5), 84, 1972.
51. Test, F. L., Laminar flow heat transfer and fluid flow for liquids with a temperature dependent viscosity, J. Heat Transfer, 90, 385, 1968.
52. Worsøe-Schmidt, P. M., Heat transfer and friction for laminar flow of helium and carbon dioxide in a circular tube at high heating rate, Int. J. Heat Mass Transfer, 9, 1291, 1966.
53. Bhatti, M. S. and Shah, R. K., Turbulent forced convection in ducts, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 4.
54. Petukhov, B. S. and Popov, V. N., Theoretical calculation of heat exchanger and frictional resistance in turbulent flow in tubes of incompressible fluid with variable physical properties, High Temp., 1(1), 69, 1963.
55. Petukhov, B. S., Heat transfer and friction in turbulent pipe flow with variable physical properties, in Advances in Heat Transfer, Vol. 6, Hartnett, J. P. and Irvine, T. V., Eds., Academic Press, New York, 1970, 504.
56. Webb, R. I., A critical evaluation of analytical solutions and Reynolds analogy equations for heat and mass transfer in smooth tubes, Wärme und Stoffübertragung, 4, 197, 1971.
57. Sleicher, C. A. and Rouse, M. W., A convenient correlation for heat transfer to constant and variable property fluids in turbulent pipe flow, Int. J. Heat Mass Transfer, 18, 677, 1975.
58. Gnielinski, V., New equations for heat and mass transfer in turbulent pipe and channel flow, Int. Chem. Eng., 16, 359, 1976.
59. Kays, W. M. and Crawford, M. E., Convective Heat and Mass Transfer, 2nd ed., McGraw-Hill, New York, 1981.
60. Kakaç, S. and Yener, Y., Convective Heat Transfer, 2nd ed., CRC Press, Boca Raton, FL, 1994.
61. McAdams, W. H., Heat Transmission, 3rd ed., McGraw-Hill, New York, 1954.
62. Kakaç, S., The effects of temperature-dependent fluid properties on convective heat transfer, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 18.
63. Hausen, H., Darstellung des Warmeüberganges in Rohren durch verallgemeinerte Potenzbeziehungen, Z. Ver. Dtsch. Ing. Beigeft Verfahrenstech., 4, 91, 1943.
64. Rehme, K., A simple method of predicting friction factors of turbulent flow in noncircular channels, Int. J. Heat Mass Transfer, 16, 933, 1973.
65. Malak, J., Hejna, J., and Schmid, J., Pressure losses and heat transfer in noncircular channels with hydraulically smooth walls, Int. J. Heat Mass Transfer, 18, 139, 1975.
66. Brundrett, E., Modified hydraulic diameter, in Turbulent Forced Convection in Channels and Bundles, Vol. 1, Kakaç, S. and Spalding, D. B., Eds., Hemisphere, Washington, DC, 1979, 361.
67. Perkins, H. C. and Worsøe-Schmidt, P., Turbulent heat and momentum transfer for gases in a circular tube at wall to bulk temperature ratios to seven, Int. J. Heat Mass Transfer, 8, 1011, 1965.
68. McElligot, D. M., Magee, P. M., and Leppert, G., Effect of large temperature gradients on convective heat transfer: the downstream region, J. Heat Transfer, 87, 67, 1965.
69. Colburn, A. P., A method of correlating forced convection heat transfer data and comparison with fluid friction, Trans. AIChE, 29, 174, 1933.
70. Hufschmidt, W., Burck, E., and Riebold, W., Die Bestimmung örtlicher und Warmeübergangs-Zahlen in Rohren bei Hohen Warmestromdichten, Int. J. Heat Mass Transfer, 9, 539, 1966.
71. Rogers, D. G., Forced convection heat transfer in single phase flow of a Newtonian fluid in a circular pipe, CSIR Report CENG 322, Pretoria, South Africa, 1980.
72. Hausen, H., Extended equation for heat transfer in tubes at turbulent flow, Wärme und Stoübertragung, 7, 222, 1974.
73. Humble, L. V., Lowdermilk, W. H., and Desmon, L. G., Measurement of average heat transfer and friction coefficients for subsonic flow of air in smooth tubes at high surface and fluid temperature, NACA Report 1020, 1951.
74. Barnes, J. F. and Jackson, J. D., Heat transfer to air, carbon dioxide and helium flowing through smooth circular tubes under conditions of large surface / gas temperature ratio, J. Mech. Eng. Sci., 3(4), 303, 1961.
75. Dalle-Donne, M. and Bowditch, P. W., Experimental local heat transfer and friction coefficients for subsonic laminar transitional and turbulent flow of air or helium in a tube at high temperatures, Dragon Project Report 184, Winfirth, Dorchester, Dorset, U.K., 1963.
76. Kakaç, S., Shah, R. K., and Aung, W., Eds., Handbook of Single-Phase Convective Heat Transfer, John Wiley and Sons, New York, 1987.
77. Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Two-Phase Flow Heat Exchangers, Kluwer Publishers, The Netherlands, 1988.
78. Zukauskas, A. A., Convective heat transfer in cross flow, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 6.
79. Shah, R. K. and Joshi, S. D., Convective heat transfer in curved pipes, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 5.
80. Mori, Y. and Nakayoma, W., Study on forced convective heat transfer in curved pipes (3rd Report, Theoretical Analysis under the Condition of Uniform Wall Temperature and Practical Formulae), Int. J. Heat Mass Transfer, 10, 1426, 1967.
81. Akiyama, M. and Cheng, K. C., Laminar forced convection heat transfer in curved pipes with uniform wall temperature, Int. J. Heat Mass Transfer, 15, 1426, 1972.
82. Manlapaz, R. L. and Churchill, S. W., Fully developed laminar convection from a helical coil, Chem. Eng. Commun., 9, 185, 1981.
83. Kubair, V. and Kuloor, N. R., Heat transfer to Newtonian fluids in coiled pipes in laminar flow, Int. J. Heat Mass Transfer, 9, 63, 1966.
84. Kubair, V. and Kuloor, N. R., Heat transfer to Newtonian fluids in spiral coils at constant tube wall temperature in laminar flow, Indian J. Technol., 3, 144, 1965.
85. Pratt, N. H., The heat transfer in a reaction tank cooled by means of a coil, Trans. Inst. Chem. Eng., 25, 163, 1947.
86. Orlov, V. K. and Tselishchev, P. A., Heat exchange in a spiral coil with turbulent flow of water, Thermal Eng., 11(12), 97, 1964.
87. Shah, R. K. and Joshi, S. D., Convective heat transfer in bends and fittings, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 10.
88. Ede, A. J., The effect of a right-angled bend on heat transfer in a pipe, Int. Dev. Heat Transfer, 634, 1962.
89. Tailby, S. R. and Staddon, P. W., The influence of 90° and 180° pipe bends on heat transfer from an internally flowing gas stream, Heat Transfer, Vol. 2, Paper No. FC4.5, 1970.
90. Moshfeghian, M. and Bell, K. J., Local heat transfer measurements in and downstream from a U-bend, ASME Paper No. 79-HT-82, 1979.
91. Moody, L. F., Friction factor for pipe flow, Trans. ASME, 66, 671, 1994.
92. Brundrett, E., Modified hydraulic diameter for turbulent flow, in Turbulent Forced Convection in Channels and Bundles, Vol. 1, Kakaç, S. and Spalding, D. B., Eds., Hemisphere, Washington, DC, 1979, 361.
93. Rohsenow, W. M., Heat exchangers - basic methods, in Heat Exchangers:Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, DC, 1981, 429-459.
94. Kakaç, S., Shah, R. K., and Aung, W., Eds., Handbook of SinglePhase Convective Heat Transfer, John Wiley and Sons, New York, 1987, ch. 4 and 8.
95. Kern, D. Q., Process Heat Transfer, McGraw-Hill, New York, 1950.
96. Moran, J. M. and Shapiro, N. H., Fundamentals of Engineering Thermodynamics, 3rd ed., John Wiley and Sons, New York, 1995.
97. Zukauskas, A., Convective heat transfer in cross flow, in Handbook of Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 6.
98. Zukauskas, A. and Uliniskas, R., Banks of plane and finned tubes, in Heat Exchanger Design Handbook, Vol. 2, Schlünder, E. U., Ed., Hemisphere, Washington, DC, 1983, 2.5.3.1.
99. Gaddis, E. S. and Gnielinski, V., Pressure drop in cross flow across tube bundles, Int. J. Eng., 25(1), 1, 1985.
100. Shah, R. K. and Joshi, S. D., Convective heat transfer in curved ducts, in Handbook of Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 5 and 10.
101. Srinivasan, P. S., Nandapurkar, S. S., and Holland, F. A., Friction for coils. Trans. Inst. Chem. Eng., 48, T156, 1970.
102. Manlapaz, R. L. and Churchill, S. W., Fully developed laminar flow in a helically coiled tube of finite pitch, Chem. Eng. Commun., 7, 557, 1980.
103. Kubair, V. and Kuloor, N. R., Non-isothermal pressure drop data for liquid flow in helical coils, Indian J. Technol., 3, 5, 1965.
104. Kubair, V. and Kuloor, N. R., Flow of Newtonian fluids in Archimedean spiral tube coils, Indian J. Technol., 4, 3, 1966.
105. Kubair, V. and Kuloor, N. R., Non-isothermal pressure drop data for spiral tube coils, Indian J. Technol., 3, 382, 1965.
106. Kubair, V. and Kuloor, N.R., Heat transfer for Newtonian fluids in coiled pipes in laminar flow, Int. J. Heat Transfer, 9, 63, 1966.
107. Ito, H., Friction factors for turbulent flow in curved pipes, J. Basic Eng., 81, 123, 1959.
108. Boyce, B. E., Collier, J. G., and Levy, J., Eds., Hole-up and pressure drop measurements in the two-phase flow of air-water mixtures in helical coils, in Co-current Gas Liquid Flow, Plenum Press, UK, 1969, 203.
109. Rogers, G. F. C. and Mayhew, Y. R., Heat transfer and pressure loss in helically coiled tubes with turbulent flow, Int. J. Heat Mass Transfer, 7, 1207, 1964.
110. Ito, H., Pressure losses in smooth bends, J. Basic Eng., 82, 131, 1960.
111. Idelchik, I. E., Handbook of Hydraulic Resistance, 2nd ed., Hemisphere, Washington, DC, 1986.
112. Powle, U. S., Energy losses in smooth bends, Mech. Eng. Bull. (India), 12(4), 104, 1981.
113. Perry, R. N. and Chilton, C. H., Chemical Engineers’ Handbook, 5th ed., McGraw-Hill, New York, 1973.
114. Hooper, W. B., The two-K method predicts head losses in pipe fittings, Chem. Eng., 24, 96-100, 1981.
115. Kakaç, S., Ed., Boilers, Evaporators and Condensers, John Wiley and Sons, New York, 1991.
116. Kays, W. M. and London, A. L., Compact Heat Exchangers, McGraw-Hill, New York, 1984.
117. Morini, G. L., Single-phase convective heat transfer in microchannels: a rewiev of experimental results, International Journal of Thermal Sciences, 631-651, 2004.
118. Kakaç, S. and Yener, Y., Convective Heat Transfer, 2nd ed., CRC Press, Florida, 1995.
119. Adams, T. M., Dowling, M. F., Abdel-Khalik, S. I., and Jeter, S. M., Applicability of traditional turbulent single-phase forced convection correlations to non-circular microchannels, Int. J. Heat Mass Transfer, 42, 4411-4415, 1999.
120. Bayazitoglu, Y., Tunc, G., Wilson, K., and Tjahjono, I., Convective heat transfer for single-phase gases in microchannel slip flow: Analytical solutions, in Microscale Heat Transfer - Fundamentals and Applications, Kakaç, S., Vasiliev, L., Bayazitoglu, Y., and Yener., Y., Eds., Kluwer Academic Publishers, The Netherlands, 2005, 125-148.
121. Zhang, M. Z., Nano/Microscale Heat Transfer, McGraw-Hill, New York, 2007.
122. Yener, Y., Kakaç, S., Avelino, M., and Okutucu, T., Single-phase forced convection in microchannels A State-of-the-Art Review, in Microscale Heat Transfer-Fundamentals and Applications, Kakaç, S., Vasiliev, L., Bayazitoglu, Y., and Yener., Y., Eds., Kluwer Academic Publishers, The Netherlands, 2005, 1-24.
123. Gad-El-Hak, M., The fluid mechanics of microdevices-the freshman scholar lecture, J. Fluids Eng., 121, 5-33, 1999.
124. Bayazitoglu, Y. and Kakaç, S., Flow regimes in microchannel single-phase gaseous fluid flow, in Microscale Heat Transfer- Fundamentals and Applications, Kakaç, S., Vasiliev, L., Bayazitoglu, Y., and Yener., Y., Eds., Kluwer Academic Publishers, The Netherlands, 2005, 75-92.
125. Gad-El-Hak, M., Momentum and heat transfer in MEMS, Congrs francais de Thermique, FT, Grenoble, France, 3-6 June, Elsevier, 2003.
126. Beskok, A., Trimmer, W., and Karniadakis, G., Rarefaction compressibility and thermal creep effects in gas microflows, Proc. ASME DSC, 57(2), 877-892, 1995.
127. Çetin, B., Yuncu, H., and Kakaç, S., Gaseous flow in microconduits with viscous dissipation, Int. J. Transp. Phenom., 8, 297-315, 2007.
128. Wu, P. Y. and Little, W. A., Measurement of heat transfer characteristics of gas flow in fine channels heat exchangers used for microminiature refrigerators, Cryogenics, 24(5), 415-420, 1985.
129. Choi, S. B., Barron, R. F., and Warrington, R. O., Fluid flow and heat transfer in microtubes, in Micromechanical Sensors, Actuators and Systems, Vol. DSC-32, ASME, Georgia, 1991, 123-134.
130. Yu, D., Warrington, R., Barron, R., and Ameel, T., An experimental and theoretical investigation and heat Transfer in microtubes, Proceedings of ASME/JSME Thermal Engineering Conference 1, 523-530, 1995.
131. Peng, X. F. and Peterson, G. P., Convective heat transfer and flow friction for water flow in microchannel structures, Int. J. Heat Mass Transfer, 39, 2599-2608, 1996.
132. Ameel, T. A., Wang, X., Barron, R. F., and Warrington, R. O., Laminar forced convection in a circular tube with constant heat flux and slip flow, Microscale Thermophys. Eng, 1(4), 303-320, 1997.
133. Barron, R. F., Wang, X., Ameel, T. A., and Warrington, R. O., The Graetz problem extended to slip-flow, Int. J. Heat Mass Transfer, 40(8), 1817-1823, 1997.
134. Yu, S. and Ameel, T., Slip-flow heat transfer in rectangular microchannels, Int. J. Heat Mass Transfer, 44, 4225-4234, 2001.
135. Renksizbulut, M., Niazmand, H., and Tercan, G., Slip-flow and heat transfer in rectangular microchannels with constant wall temperature, Int. J. Therm. Sci., 44, 870-881, 2006.
136. Renksizbulut, M. and Niazmand, H., Laminar flow and heat transfer in the entrance region of trapezoidal channels with constant wall temperature, J. Heat Transfer, 128, 63-74, 2006.
137. Acosta, R. E., Muller, R. H., and Tobias, W. C., Transport process in narrow (Capillary) channels, AICHE J., 31, 473-482, 1985.
138. Pfalher, J., Harley, J., Bau, H. H., and Zemel, N., Liquid transport in micron and submicron channels, Sensor. Actuat. A, 21-23, 431-434, 1990.
139. Pfalher, J., Harley, J., Bau, H. H., and Zemel, N., Liquid and gas transport in small channels, Vol. DSC-31, ASME, Georgia, 1990, 149-157.
140. Pfalher, J., Harley, J., Bau, H. H., and Zemel, N., Gas and liquid flow in small channels, in Micromechanical Sensors, Actuator and Systems, Vol. DSC-32, ASME, Georgia, 1991, 49-60.
141. Arkilic, E. B., Breuer, K. S., and Schmidt, M. A., Gaseous flow in microchannels, in Application of Microfabrication to Fluid Mechanics, Vol. FED-197, ASME, New York, 1994, 57-66.
142. Pong, K., Ho, C., Liu, J., and Tai, Y., Non-linear pressure distribution in uniform microchannels, in Application of Microfabrication to Fluid Mechanics, Vol. FED-197, ASME, New York, 1994, 51-56.
143. Liu, J., Tai, Y. C., and Ho, C. M., MEMS for pressure distribution studies of gaseous flows through uniform microchannels, Proceedings of Eighth Annual International Workshop MEMS, IEEE, 209-215, 1995.
144. Shih, J. C., Ho, C. M., Liu, J., and Tai, Y. C., Monatomic and polyatomic gas flow through uniform microchannels, Vol. DSC-59, ASME, Georgia, 1996, 197-203.
145. Harley, J., Huang, Y., Bau, H. H., and Zemel, J. N., Gas flow in microchannels, J. Fluid Mech.. 284, 257-274, 1995.
146. Araki, T., Soo, K. M., Hiroshi, I., and Kenjiro, S., An experimental investigation of gaseous flow characteristics in microchannels, Proceedings of the International Conference on Heat Transfer and Transport Phenomena in Microscale, 155-161, 2000.
147. Li, Z. X., Du, D. X., and Guo, Z. Y., Characteristics of frictional resistance for gas flows in microtubes, Proceedings of Symposium on Energy Engineering in the 21st Century, 2, 658-664, 2000.
148. Yang, C. Y., Chien, H. T., Lu, S. R., and Shyu, R. J., Friction characteristics of water, R-134a and air in small tubes, Proceedings of the International Conference on Heat Transfer and Transport Phenomena in Microscale, 168-174, 2000.
149. Lalonde, P., Colin, S., and Caen, R., Mesure de Debit de Gaz dans les Microsystems, Mech. Ind., 2, 355-362, 2001.
150. Turner, S. E., Sun, H., Faghri, M., and Gregory, O.J., Compressible gas flow through smooth and rough microchannels, Proceedings of IMECE ASME 2001, HTD-24144, 2001.
151. Hsieh, S. S., Tsai, H. H., Lin, C. Y., Huang, C. F., and Chien, C. M., Gas flow in long microchannel, Int. J. Heat Mass Transfer, 47, 3877-3887, 2004.
152. Tang, G. H. and He, Y. L., An experimental investigation of gaseous flow characteristics in microchannels, Proceedings of Second International Conference on Microchannels and Minichannels, Rochester, 359-366, 2004.
153. Celata, G. P., Cumo, M., McPhail, S. J., Tesfagabir, L., and Zummo, G., Experimental study on compressibility effects in microtubes, Proceedings of the XXIII UIT Italian National Conference, 53-60, 2005.
154. Morini, G. L., Lorenzini, M., and Salvigni, S., Friction characteristics of compressible gas flows in microtubes, Exp. Therm. Fluid Sci., 30, 773-744, 2006.
155. Hadjiconstantinou, N. G. and Simsek, O., Constant-wall-temperature Nusselt number in micro and nano-channels, Trans. ASME, 57(2), 877-892, 2002.
156. Wu, P. and Little, W. A., Measurement of friction factors of the flow of gases in very fine channels used for mcrominiature Joule-Thompson refrigerators, Cryogenics, 23, 3-17, 2003.
157. Li, Z. X., Du, D. X., and Guo, Z. Y., Experimental study on flow characteristics of liquid in circular microtubes, Microsc. Thermophys. Eng., 7, 253-265, 2003.
158. Stephan, K., Heat Transfer in Condensation and Boiling, Springer-Verlag, Berlin, 1992.
159. Gnielinski, V., New equations for heat transfer in turbulent pipe and channel flow, Int. Chem. Eng., 16, 359-368, 1976.
160. Adams, T. M., Abdel-Khalik, S. I., Jeter, S. M., and Qureshi, Z. H., An experimental investigation of single-phase forced convection in microchannels, Int. J. Heat Mass Transfer, 41(6-7), 851-857, 1998.
161. Tsuzuki, N., Utamura, M., and Ngo, T. L., Nusselt number correlations for a microchannel heat exchanger hot water supplier with s-shaped fins, Appl. Therm. Eng., 29, 3299-3308, 2009.
162. White, F. M., Viscous Fluid Flow, McGraw-Hill, New York, 1991.
163. Jiang, P. X., Fan, M. H., Si, G. S., and Ren, Z. P., Thermal-hydraulic performance of small scale microchannel and porous-media heat exchangers, Int. J. Heat Mass Transfer, 44, 1039-1051, 2001.
164. Kakaç, S., Shah, R. K., and Aung, W., Handbook of Single Phase Convective Heat Transfer, John Wiley and Sons, New York, 1987.
165. Choi, S. B., Barron, R. F., and Warrington, R. O., Fluid flow and heat transfer, in Micromechanical Sensors, Actuator and Systems, Vol. DSC-32, ASME, Georgia, 1991, 123-134.
166. Yu, D., Warrington, R. O., Barron, R., and Ameel, T., An experimental and theoretical investigation of fluid flow and heat transfer in microtubes, in Proceedings of ASME/JSME Thermal Engineering Joint Conference, Hawaii, 523-530, 1995.
167. Bejan, A., Heat Transfer, John Wiley and Sons, New Jersey, 1993.
168. Park, H. S. and Punch, J., Friction factor and heat transfer in multiple microchannels with uniform flow distribution, Int. J. Heat Mass Transfer, 51, 4435-4443, 2008.
169. Lee, P. S., Garimella, S. V., and Liu, D., Investigation of heat transfer in rectangular microchannels, Int. J. Heat Mass Transfer, 48, 1688-1704, 2005.
170. Wu, P. and Little, W. A., Measurement of the heat transfer characteristics of gas flow in fine channel heat exchangers used for microminiature refrigerators, Cryogenics, 24(8), 415-420, 1984.
171. Wang, B. X. and Peng, X. F., Experimental investigation of liquid forced convection heat transfer through microchannels, Int. J. Heat Mass Transfer, 37(1), 73-82, 1994.
172. Peng, X. F., Peterson, G. P., and Wang, B. X., Heat transfer characteristics of water flowing through microchannels, Exp. Heat Transfer, 7, 265-283, 1994.
173. Sobhan, C. B. and Peterson, G. P., Microscale and Nanoscale Heat Transfer, CRC Press, Florida, 2008.
174. Celata, G. P., Cumo, M., Gulielmi, M., and Zummo, G., Experimental investigation of hydraulic and single phase heat transfer in 0.130 mm capillary tube, Nano. Micro. Thermophys. Eng., 6(2), 85-97, 2002.
175. Kandlikar, S. G. and Upadhye, H. R., Extending the heat flux limit with enhanced microchannels in direct single-phase cooling of computer chips, 21st Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 8-15, 2005.
176. Kandlikar, S. G., Schmitt, D., Carrano, A. L., and Taylor, J. B., Characterization of surface roughness effects on pressure drop in single-phase flow in minichannels, Phys. Fluid., 17, 2005.
177. Wang, B., Zhou, L., and Peng, X., A fractal model for predicting the effective thermal conductivity of liquid with suspension of nanoparticles, Int. J. Heat Mass Transfer, 46(14), 2665-2672, 2003.
178. Keblinski, P., Phillpot, S. R., Choi, S. U. S., and Eastman, J. A., Mechanisms of heat flow in suspensions of nano-sized particles (Nanofluids), Int. J. Heat Mass Transfer, 44(4), 855-863, 2002.
179. Chein, R. and Chuang, J., Experimental microchannel heat sink performance studies using nanofluids, Int. J. Therm. Sci., 46(1), 57-66, 2007.
180. Lee, J. and Mudawar, I., Assessment of the effectiveness of nanofluids for singlephase and two-phase heat transfer in micro-channels, Int. J. Heat Mass Transfer, 50(3-4), 442-463, 2007.
181. Eastman, J., Choi, S. U. S., Li, S., Thompson, L., and Lee, S., Enhanced thermal conductivity through the development of nanofluids, Proceedings of the Symposium on Nanophase and Nanocomposite Materials II, Boston, 447, 3-11, 1997.
182. Yu, W., France, D. M., Routbort, J. L., and Choi, S. U. S., Review and comparison of nanofluid thermal conductivity and heat transfer enhancements, Heat Transfer Eng., 29(5), 432-460, 2008.
183. Romano, J. M., Parker, J. C., and Ford, Q. B., Application opportunities for nanoparticles made from the condensation of physical vapors, Adv. Pm. Part., 2, 12-13, 1997.
184. Eastman, J. A., Choi, S. U. S., Li, S., Yu, W., and Thompson, L. J., Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles, Appl. Phys. Lett., 78(6), 718-720, 2001.
185. Ding, Y., Alias, H., Wen, D., and Williams, R. A., Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids), Int. J. Heat Mass Transfer, 49(1-2), 240-250, 2006.
186. Zhu, H. T., Zhang, C. Y., Tang, Y. M., and Wang, J. X., Novel synthesis and thermal conductivity of CuO nanofluid, J. Phys. Chem. C, 111(4), 1646-1650, 2007.
187. Hong, T., Yang, H., and Choi, C. J., Study of the enhanced thermal conductivity of Fe nanofluids, J. Appl. Phys., 97(6), 064311-4, 2005.
188. Beck, M., Yuan, Y., Warrier, P., and Teja, A., The effect of particle size on the thermal conductivity of alumina nanofluids, J. Nanopart. Res., 11(5), 1129-1136, 2009.
189. Wang, X., Choi, S. U. S., and Xu, X., Thermal conductivity of nnoparticle - fluid mixture, J. Thermophys. Heat Transfer, 13(4), 474-480, 1999.
190. Czarnetzki, W. and Roetzel, W., Temperature oscillation techniques for simultaneous measurement of thermal diffusivity and conductivity, Int. J. Thermophys., 16(2), 413-422, 1995.
191. Ju, Y. S., Kim, J., and Hung, M., Experimental study of heat conduction in aqueous suspensions of aluminum oxide nanoparticles, J. Heat Transfer, 130(9), 092403-6, 2008.
192. Putnam, S. A., Cahill, D. G., Braun, P. V., Ge, Z., and Shimmin, R. G., Thermal conductivity of nanoparticle suspensions, J. Appl. Phys., 99(8), 084308-6, 2006.
193. Maxwell, J. C., A Treatise on Electricity and Magnetism, Clarendon Press, Oxford, 1873.
194. Hamilton, R. L. and Crosser, O. K., Thermal conductivity of heterogeneous twocomponent systems, Ind. Eng. Chem. Fundam., 1(3), 187-191, 1962.
195. Bhattacharya, P., Saha, S. K., Yadav, A., Phelan, P. E., and Prasher, R. S., Brownian dynamics simulation to determine the effective thermal conductivity of nanofluids, J. Appl. Phys., 95(11), 6492-6494, 2004.
196. Koo, J. and Kleinstreuer, C., A new thermal conductivity model for nanofluids, J. Nanopart. Res., 6(6), 577-588, 2004.
197. Das, S. K., Putra, N., Thiesen, P., and Roetzel, W., Temperature dependence of thermal conductivity enhancement for nanofluids, J. Heat Transfer, 125(4), 567-574, 2003.
198. Özerinç, S., Kakaç, S., and Yazıcıoğlu, A. G., Enhanced thermal conductivity of nanofluids: A State-of-the-Art Review, Microfluid. Nanofluid., 8(2), 144-170, 2010.
199. Prasher, R., Phelan, P. E., and Bhattacharya, P., Effect of aggregation kinetics on the thermal conductivity of nanoscale colloidal solutions (Nanofluid), Nano Lett., 6(7), 1529-1534, 2006.
200. He, Y., Jin, Y., Chen, H., Ding, Y., Cang, D., and Lu, H., Heat transfer and flow behaviour of aqueous suspensions of TiO2 nanoparticles (Nanofluids) flowing upward through a vertical pipe, Int. J. Heat Mass Transfer, 50(11-12), 2272-2281, 2007.
201. Evans, W., Prasher, R., Fish, J., Meakin, P., Phelan, P., and Keblinski, P., Effect of aggregation and interfacial thermal resistance on thermal conductivity of nanocomposites and colloidal nanofluids, Int. J. Heat Mass Transfer, 51(5-6), 1431-1438, 2008.
202. Nan, C., Birringer, R., Clarke, D. R., and Gleiter, H., Effective thermal conductivity of particulate composites with interfacial thermal resistance, J. Appl. Phys., 81(10), 6692-6699, 1997.
203. Feng, Y., Yu, B., Xu, P., and Zou, M., The effective thermal conductivity of nanofluids based on the nanolayer and the aggregation of nanoparticles, J. Phys. D:Appl. Phys., 40(10), 3164-3171, 2007.
204. Xuan, Y., Li, Q., and Hu, W., Aggregation structure and thermal conductivity of nanofluids, AIChE J., 49(4), 1038-1043, 2003.
205. Yu, C., Richter, A. G., Datta, A., Durbin, M. K., and Dutta, P., Observation of molecular layering in thin liquid films using X-ray reflectivity, Phys. Rev. Lett., 82(11), 2326-2329, 1999.
206. Yu, W. and Choi, S. U. S., The role of interfacial layers in the enhanced thermal conductivity of nanofluids: A renovated Maxwell model, J. Nanopart. Res., 5(1), 167-171, 2003.
207. Schwartz, L. M., Garboczi, E. J., and Bentz, D. P., Interfacial transport in porous media: application to DC electrical conductivity of mortars, J. Appl. Phys., 78(10), 5898-5908, 1995.
208. Bruggeman, D. A. G., The calculation of various physical constants of heterogeneous substances, 1. The dielectric constants and conductivities of mixtures Composed of Isotropic Substances, Ann. Phys., 416(7), 636-664, 1935.
209. Xue, Q. and Xu, W., A model of thermal conductivity of nanofluids with interfacial shells, Mater. Chem. Phys., 90(2-3), 298-301, 2005.
210. Murshed, S., Leong, K., and Yang, C., Enhanced thermal conductivity of TiO2- water based nanofluids, Int. J. Therm. Sci., 44(4), 367-373, 2005.
211. Choi, S. U. S., Zhang, Z. G., Yu, W., Lockwood, F. E., and Grulke, E. A., Anomalous thermal conductivity enhancement in nanotube suspensions, Appl. Phys. Lett., 79(14), 2252-2254, 2001.
212. Lee, S., Choi, S. U. S., Li, S., and Eastman, J. A., Measuring thermal conductivity of fluids containing oxide nanoparticles, J. Heat Transfer, 121(2), 280-289, 1999.
213. Lee, D., Thermophysical properties of interfacial layer in nanofluids, Langmuir, 23(11), 6011-6018, 2007.
214. Chopkar, M., Sudarshan, S., Das, P., and Manna, I., Effect of particle size on thermal conductivity of nanofluid, Metall. Mater. Trans. A, 39(7), 1535-1542, 2008.
215. Eastman, J. A., Choi, S. U. S., Li, S., Yu, W., and Thompson, L. J., Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles, Appl. Phys. Lett., 78(6), 718-720, 2001.
216. Chopkar, M., Das, P. K., and Manna, I., Synthesis and characterization of nanofluid for advanced heat transfer applications, Scripta Mater., 55(6), 549-552, 2006.
217. Timofeeva, E. V., Routbort, J. L., and Singh, D., Particle shape effects on thermophysical properties of alumina nanofluids, J. Appl. Phys., 106(1), 014304-10, 2009.
218. Li, C. H., Williams, W., Buongiorno, J., Hu, L., and Peterson, G. P., Transient and steady-state experimental comparison study of effective thermal conductivity of Al2O3/water nanofluids, J. Heat Transfer, 130(4), 042407-7, 2008.
219. Murshed, S., Leong, K., and Yang, C., Investigations of thermal conductivity and viscosity of nanofluids, Int. J. Therm. Sci., 47(5), 560-568, 2008.
220. Zhang, X., Gu, H., and Fujii, M., Effective thermal conductivity and thermal diffusivity of nanofluids containing spherical and cylindrical nanoparticles, J. Appl. Phys., 100(4), 044325-5, 2006.
221. Zhang, X., Gu, H., and Fujii, M., Experimental study on the effective thermal conductivity and thermal diffusivity of nanofluids, Int. J. Thermophys., 27(2), 569-580, 2006.
222. Roy, G., Nguyen, C. T., Doucet, D., Suiro, S., and Maré, T., Temperature dependent thermal conductivity evaluation of alumina based nanofluids, Proceedings of the 13th International Heat Transfer Conference, Sydney, 2006.
223. Hong, K. S., Hong, T., and Yang, H., Thermal conductivity of Fe nanofluids depending on the cluster size of nanoparticles, Appl. Phys. Lett., 88(3), 031901-3, 2006.
224. Wang, X., Zhu, D., and Yang, S., Investigation of pH and SDBS on enhancement of thermal conductivity in nanofluids, Chem. Phys. Lett., 470(1-3), 107-111, 2009.
225. Masuda, H., Ebata, A., Teramae, K., and Hishinuma, N., Alteration of thermal conductivity and viscosity of liquid by dispersing ultra-fine particles (Dispersion of γ-Al2O3, SiO2, and TiO2 ultra-fine particles), Netsu Bussei, 4(4), 227-233, 1993.
226. Xie, H., Wang, J., Xi, T., and Liu, Y., Thermal conductivity of suspensions containing nanosized SiC particles, Int. J. Thermophys., 23(2), 571-580, 2002.
227. Xie, H., Wang, J., Xi, T., Liu, Y., and Ai, F., Dependence of the thermal conductivity of nanoparticle-fluid mixture on the base fluid, J. Mater. Sci. Lett., 21(19), 1469-1471, 2002.
228. Li, C. H. and Peterson, G. P., Experimental investigation of temperature and volume fraction variations on the effective thermal conductivity of nanoparticle suspensions (Nanofluids), J. Appl. Phys., 99(8), 084314-1-084314-8, 2006.
229. Mintsa, H. A., Roy, G., Nguyen, C. T., and Doucet, D., New temperature dependent thermal conductivity data for water-based nanofluids, Int. J. Therm. Sci., 48(2), 363-371, 2009.
230. Turgut, A., Tavman, I., Chirtoc, M., Schuchmann, H., Sauter, C., and Tavman, S., Thermal conductivity and viscosity measurements of water-based TiO2 nanofluids, Int. J. Thermophys., 30(4), 1213-1226, 2009.
231. Assael, M. J., Metaxa, I. N., Arvanitidis, J., Christofilos, D., and Lioutas, C., Thermal conductivity enhancement in aqueous suspensions of carbon multi-walled and double-walled nanotubes in the presence of two different dispersants, Int. J. Thermophys., 26(3), 647-664, 2005.
232. Liu, M., Lin, M. C., Huang, I., and Wang, C., Enhancement of thermal conductivity with carbon nanotube for nanofluids, Int. Commun. Heat Mass, 32(9), 1202-1210, 2005.
233. Pak, B. C. and Cho, Y. I., Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles, Exp. Heat Transfer, 11(2), 151-170, 1998.
234. Xuan, Y. and Roetzel, W., Conceptions for heat transfer correlation of nanofluids, Int. J. Heat Mass Transfer, 43(19), 3701-3707, 2000.
235. Wang, B., Zhou, L., and Peng, X., Surface and size effects on the specific heat capacity of nanoparticles, Int. J. Thermophys., 27(1), 139-151, 2006.
236. Einstein, A., A new determination of the molecular dimensions, Ann. Phys., 324(2), 289-306, 1906.
237. Brinkman, H. C., The viscosity of concentrated suspensions and solutions, J. Chem. Phys., 20(4), 571, 1952.
238. Tseng, W. J. and Lin, K., Rheology and colloidal structure of aqueous TiO2 nanoparticle suspensions, Mater. Sci. Eng. A, 355(1-2), 186-192, 2003.
239. Maïga, S. E. B., Nguyen, C. T., Galanis, N., and Roy, G., Heat transfer behaviours of nanofluids in a uniformly heated tube, Superlatt. Microstruct., 35(3-6), 543-557, 2004.
240. Kulkarni, D. P., Das, D. K., and Chukwu, G. A., Temperature dependent rheological property of copper oxide nanoparticles suspension (Nanofluid), J. Nanosci. Nanotechnol., 6, 1150-1154, 2006.
241. Shah, R. K. and London, A. L., Laminar Flow Forced Convection in Ducts, Supplement 1 to Advances in Heat Transfer, Academic Press, New York, 1978.
242. Sieder, E. N. and Tate, G. E., Heat transfer and pressure drop of liquids in tubes, Ind. Eng. Chem., 28(12), 1429-1435, 1936.
243. Kakaç, S. and Pramuanjaroenkij, A., Review of convective heat transfer enhancement with nanofluids, Int. J. Heat Mass Transfer, 52(13-14), 3187-3196, 2009.
244. Özerinç, S., Heat transfer enhancement with nanofluids, M.S. Thesis, Middle East Technical University, Ankara 2010.
245. Godson, L., Raja, B., Mohan Lal, D., and Wongwises, S., Enhancement of heat transfer using nanofluids-An overview, Renew. Sust. Energy Rev., 14(2), 629-641, 2010.
246. Xuan, Y. and Li, Q., Investigation on convective heat transfer and flow features of nanofluids, J. Heat Transfer, 125(1), 151-155, 2003.
247. Yang, Y., Zhang Z. G., Grulke E. A., Anderson W. B., and Wu G., Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow, Int. J. Heat Mass Transfer, 48(6), 1107-1116, 2005.
248. Maïga, S. E. B., Nguyen C. T., Galanis N., Roy G., Mare T., and Coqueux M., Heat transfer enhancement in turbulent tube flow using Al2O3 nanoparticle suspension, Int. J. Numer. Method. H., 16(3), 275-292, 2006.
249. Vasu, V., Rama Krishna, K., and Kumar, A., Analytical prediction of forced convective heat transfer of fluids embedded with nanostructured materials (nanofluids), Pramana, 69(3), 411-421, 2007.
250. Putra, N., Roetzel, W., and Das, S., Natural convection of nano-fluids, Heat Mass Transfer, 39(8), 775-784, 2003.
251. Chun, B., Kang, H., and Kim, S., Effect of alumina nanoparticles in the fluid on heat transfer in double-pipe heat exchanger system, Korean J. Chem. Eng., 25(5), 966-971, 2008.
252. Anoop, K., Sundararajan, T., and Das, S. K., Effect of particle size on the convective heat transfer in nanofluid in the developing region, Int. J. Heat Mass Transfer, 52(9-10), 2189-2195, 2009.
253. Asirvatham, L. G., Vishal, N., Gangatharan, S. K., and Lal, D. M., Experimental study on forced convective heat transfer with low volume fraction of CuO/ water nanofluid, Energies, 2(1), 97-110, 2009.
254. Jung, J., Oh, H., and Kwak, H., Forced convective heat transfer of nanofluids in microchannels, Int. J. Heat Mass Transfer, 52(1-2), 466-472, 2009.
255. Chandrasekar, M., Suresh, S., and Chandra Bose, A., Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid in a circular pipe under laminar flow with wire coil inserts, Exp. Therm. Fluid Sci., 34(2), 122-130, 2010.
256. Duangthongsuk, W. and Wongwises, S., An experimental study on the heat transfer performance and pressure drop of TiO2-water nanofluids flowing under a turbulent flow regime, Int. J. Heat Mass Transfer, 53(1-3), 334-344, 2010.
257. Wu, X., Wu, H., and Cheng, P., Pressure drop and heat transfer of Al2O3-H2O nanofluids through silicon microchannels, J. Micromech. Microeng., 19(10), 105020, 2009.
258. Kakaç, S., Ed., Boilers, Evaporators and Condensers, John Wiley and Sons, New York, 1991.
259. Kakaç, S., Shah, R. K., and Aung, W., Eds., Handbook of Single-Phase Convective Heat Transfer, John Wiley and Sons, New York, 1987.
260. Chenoweth, J. M., Fouling problems in heat exchangers, in Heat Transfer in High Technology and Power Engineering, Yang, W. K. and Mori, Y., Eds., Hemisphere, Washington, D.C., 1987, 406.
261. Garrett-Price, B. A., Smith, S. A., Watts, R. L., Knudsen, J. G., Marner, W. J., and Suitor, J. W., Fouling of Heat Exchangers: Characteristics, Costs, Prevention, Control, and Removal, Noyes, Park Ridge, N.J., 1985.
262. Taborek, J., Akoi, T., Ritter, R. B., and Palen, J. W., Fouling: the major unresolved problem in heat transfer, Chem. Eng. Prog., 68, 59, 1972.
263. Epstein, N., Fouling in heat exchangers, in Heat Transfer 1978, Vol. 6, Hemisphere, Washington, D.C., 1978, 235.
264. Somerscales, E. F. C. and Knudsen, J. G., Eds., Fouling of Heat Transfer Equipment, Hemisphere, Washington, D.C., 1981.
265. Melo, L. F., Bott, T. R., and Bernardo, C. A., Eds., Fouling Science and Technology, Kluwer, The Netherlands, 1988.
266. Epstein, N., Thinking about heat transfer fouling: a 5 × 5 matrix, Heat Transfer Eng., 4, 43, 1983.
267. Epstein, N., Fouling in heat exchangers, in Low Reynolds Number Flow Heat Exchangers, Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Hemisphere, Washington, D.C., 1981.
268. Friedlander, S. K., Smoke, Dust and Haze, John Wiley and Sons, New York, 1977.
269. Whitmore, P. J. and Meisen, A., Estimation of thermo- and diffusiophoretic particle deposition, Can. J. Chem. Eng., 55, 279, 1977.
270. Nishio, G., Kitani, S., and Tadahashi, K., Thermophoretic deposition of aerosol particles in a heat-exchanger pipe, Ind. Eng. Chem. Proc. Design Dev., 13, 408, 1974.
271. Taborek, J., Aoki, T., Ritter, R. B., and Palen, J. W., Predictive methods for fouling behavior, Chem. Eng. Progr., 68, 69, 1972.
272. McCabe, W. L. and Robinson, C. S., Evaporator scale formation, Ind. Eng. Chem., 16, 478, 1924.
273. Kerm, D.Q. and Seaton, R. E., A theoretical analysis of thermal surface fouling, Brit. Chem. Eng., 4, 258, 1959.
274. Knudson, J. G., Fouling of heat exchangers: are we solving the problem?, Chem. Eng. Prog., 80, 63, 1984.
275. Garret-Price, B. A., Smith, S. A., Watts, R. L., and Knudsen, J. G., Industrial Fouling: Problem Characterization, Economic Assessment, and Review of Prevention, Mitigation, and Accomodation Techniques, Report PNL-4883, Pacific Northwest Laboratory, Richland, Washington, 1984.
276. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, 7th ed., New York, 1988.
277. Somerscales, E. F. C., Fouling, in Two-Phase Flow Heat Exchangers: Thermo-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., John Wiley and Sons, New York, 1988, ch. 21.
278. Chenoweth, J. M., General design of heat exchangers for fouling conditions, in Fouling Science and Technology, Melo, L. F., Bott, T. R., and Bernardo, C. A., Eds., Kluwer, The Netherlands, 1988, 477.
279. Marner, W. J. and Suitor, J. W., Fouling with convective heat transfer, in Handbook of Single-Phase Convective Heat Transfer, Kakaç, S., Shah, R. K., and Aung, W., Eds., John Wiley and Sons, New York, 1987, ch. 21.
280. Strauss, S. D. and Puckorious, P. R., Cooling-water treatment for control of scaling, fouling and corrosion, Power, 128, S1, 1984.
281. Shah, R. K. and Sekulic’, D. P., Fundamentals of Heat Exchanger Design, John Wiley and Sons, New York, 2003.
282. Delorenzo, N. and Anderson, E. D., Heat transfer and pressure drop of liquids in double pipe fintube exchangers, Trans. ASME, 67, 697, 1945.
283. Kakaç, S. and Yener, Y., Heat Conduction, 3rd ed., Taylor and Francis, New York, 1993.
284. Kern, D. Q., Process Heat Transfer, McGraw-Hill, New York, 1950.
285. Fraas, A. P., Heat Exchanger Design, 2nd ed., John Wiley and Sons, New York, 1989.
286. Hewitt, G. F., Shires, G. L., and Bott, T. R., Process Heat Transfer, CRC Press, Boca Raton, FL, 1994.
287. Cherrmisinoff, N. P., Ed., Handbook of Heat and Mass Transfer, Vol. 1, McGraw-Hill, New York, 1986.
288. Kakaç, S., Ed., Boilers, Evaporators and Condensers, John Wiley and Sons, New York, 1991.
289. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, New York, 1988.
290. Kakaç, S., Shah, R. K., and Aung, W., Handbook of Single-Phase Convective Heat Transfer, John Wiley and Sons, New York, 1987.
291. Guy, A. R., Double-pipe heat exchangers, in Heat Exchanger Design Handbook, Schlünder, E. U., Ed., Hemisphere, Washington, DC, 1983, ch. 3.
292. Marto, P. J., Heat transfer in condensation, in Boilers, Evaporators and Condensers, Kakaç S., Ed., John Wiley and Sons, New York, 1991.
293. Marto, P. J., Fundamentals of condensation, in Two-Phase Flow Heat Exchangers:Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer, The Netherlands, 1988, 221.
294. Nusselt, W., The condensation of steam on cooled surfaces, Z.d. Ver. Deut. Ing., 60, 541, 1916.
295. Shekriladze, I. G. and Gomelauri, V. I., Theoretical study of laminar film condensation of flowing vapor, Int. J. Heat Mass Transfer, 9, 581, 1966.
296. Rose, J. W., Fundamentals of condensation heat transfer: laminar film condensation, JSME Int. J., 31, 357, 1988.
297. Kern, D. Q., Mathematical development of loading in horizontal condensers, AIChE J., 4, 157, 1958.
298. Eissenberg, D. M., An Investigation of the Variables Affecting Steam Condensation on the Outside of a Horizontal Tube Bundle, Ph.D. Thesis, University of Tennessee, Knoxville, 1972.
299. Butterworth, D., Developments in the design of shell and tube condensers, ASME Winter Annual Meeting, Atlanta, ASME Preprint 77-WA/HT-24, 1977.
300. Shklover, G. G. and Buevich, A. V., Investigation of steam condensation in an inclined bundle of tubes, Thermal Eng., 25(6), 49, 1978.
301. Kutateladze, S. S., Gogonin, N. I., Dorokhov, A. R., and Sosunov, V. I., Film condensation of flowing vapor on a bundle of plain horizontal tubes, Thermal Eng., 26, 270, 1979.
302. Fujii, T., Uehara, H., Hirata, K., and Oda, K., Heat transfer and flow resistance in condensation of low pressure steam flowing through tube banks, Int. J. Heat Mass Transfer, 15, 247, 1972.
303. Cavallini, A., Frizzerin, S., and Rossetto, L., Condensation of R-11 vapor flowing downward outside a horizontal tube bundle, Proc. 8th Int. Heat Transfer Conf., 4, 1707, 1986.
304. McNaught, J. M., Two-phase forced convection heat transfer during condensation on horizontal tube bundles, Proc. 7th Int. Heat Transfer Conf., 5, 125, 1982.
305. Marto, P. J., Heat transfer and two-phase flow during shell-side condensation, Heat Transfer Eng., 5(1-2), 31, 1984.
306. Barness, E. J., Calculation of the performance of surface condensers by digital computer, ASME Paper No. 63-PWR-2, National Power Conference, Cincinnati, Ohio, September, 1963.
307. Emerson, W. H., The application of a digital computer to the design of surface condenser, Chem. Eng., 228(5), 178, 1969.
308. Wilson, J. L., The design of condensers by digital computers, I. Chem. E. Symp. Series, Pergamon Press, London, No. 35, 21, 1972.
309. Hafford, J. A., ORCONI: A Fortran Code for the Calculation of a Steam Condenser of Circular Cross Section, ORNL-TM-4248, Oak Ridge National Laboratory, Oak Ridge, Tennessee, 1973.
310. Hopkins, H. L., Loughhead, J., and Monks, C. J., A computerized analysis of power condenser performance based upon an investigation of condensation, in Condensers: Theory and Practice, I. Chem. E. Symp. Series, Pergamon Press, London, No. 75, 152, 1983.
311. Shida, H., Kuragaska, M., and Adachi, T., On the numerical analysis method of flow and heat transfer in condensers, Proc. 7th Int. Heat Transfer Conf., 6, 347, 1982.
312. Al-Sanea, S., Rhodes, N., Tatchell, D. G., and Wilkinson, T. S., A computer model for detailed calculation of the flow in power station condensers, in Condensers:Theory and Practice, I. Chem. E. Symp. Series, Pergamon Press, London, No. 75, 70, 1983.
313. Caremoli, C., Numerical computation of steam flow in power plant condensers, in Condensers: Theory and Practice, I. Chem. E. Symp. Series, Pergamon Press, London, No. 75, 89, 1983.
314. Beckett, G., Davidson, B. J., and Ferrison, J. A., The use of computer programs to improve condenser performance, in Condensers: Theory and Practice, I. Chem. E. Symp. Series, Pergamon Press, London, No. 75, 97, 1983.
315. Zinemanas, D., Hasson, D., and Kehat, E., Simulation of heat exchangers with change of phase, Comput. Chem. Eng., 8, 367, 1984.
316. Kakaç, S., Ed., Boilers, Evaporators and Condensers, John Wiley and Sons, New York, 1991.
317. Soliman, H. M. and Azer, N. Z., Visual studies of flow patterns during condensation inside horizontal tubes, Proc. 5th Int. Heat Transfer Conf., 3, 241, 1974.
318. Rahman, M. M., Fathi, A. M., and Soliman, H. M., Flow pattern boundaries during condensation: new experimental data, Can. J. Chem. Eng., 63, 547, 1985.
319. Soliman, H. M., Flow pattern transitions during horizontal in-tube condensation, in Encyclopedia of Fluid Mechanics, Gulf Publishing Co., Houston, TX, 1986, ch. 12.
320. Breber, G., Palen, J. W., and Taborek, J., Prediction of horizontal tubeside condensation of pure components using flow regime criteria, J. Heat Transfer, 102, 471, 1980.
321. Tandon, T. N., Varma, H. K., and Gupta, C. P., A new flow regime map for condensation inside horizontal tubes, J. Heat Transfer, 104, 763, 1982.
322. Butterworth, D., Film condensation of pure vapor, in Heat Exchanger Design Handbook, Vol. 2, Schlünder, E. U., Ed., Hemisphere, Washington, DC, 1983.
323. Jaster, H. and Kosky, P. G., Condensation heat transfer in a mixed flow regime, Int. J. Heat Mass Transfer, 19, 95, 1976.
324. Traviss, D. P., Rohsenow, W. M., and Baron, A. B., Forced convection condensation inside tubes: a heat transfer equation for condenser design, ASHRAE Trans., 79, 157, 1972.
325. Cavallini, A. and Zecchin, R., A dimensionless correlation for heat transfer in forced convection condensation, Proc. 5th Int. Heat Transfer Conf., 309-313, Sept. 5-7, 1974.
326. Shah, M. M., A general correlation for heat transfer during film condensation inside pipes, Int. J. Heat Mass Transfer, 22, 547, 1979.
327. Schlager, L. M., Pate, M. B., and Bergles, A. E., Performance predictions of refrigerant- oil mixtures in smooth and internally finned tubes, II: design equations, ASHRAE Trans., 96(1), 1990.
328. Pate, M. B., Evaporators and condensers for refrigeration and air conditioning, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 635-712, 1991.
329. Wallis, G. B., Flooding Velocities for Air and Water in Vertical Tubes, UKAEA report AEEW-R123, 1961.
330. Butterworth, D. and Shock, R. A., Flow boiling, Proc. 7th Int. Heat Transfer Conf., Hemisphere, Washington, DC, 1982.
331. Davis, E. J. and Anderson, G. H., The incipience of nucleate boiling in convective flow, AIChE J., 12, 774, 1966.
332. Bergles, A. E. and Rohsenow, W. M., The determination of forced-convection surface-boiling heat transfer, J. Heat Transfer, 86, 356, 1964.
333. Kitto, J. B. and Albrecht, M. J., Elements of two-phase flow in fossil boilers, in Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer, The Netherlands, 1988, 221.
334. Collier, J. G., Convective Boiling and Condensation, 2nd ed., McGraw-Hill, London, 1981.
335. Chen, J. C., A correlation for boiling heat transfer to saturated fluids in convective flow, Industrial Eng. Chem. Process Design Dev., 5, 322, 1966.
336. Shah, M. M., A new correlation for heat transfer during boiling flow through pipes, ASHRAE Trans., 82, 66, 1976.
337. Shah, M. M., Chart correlation for saturated boiling heat transfer: equations and further study, ASHRAE Trans., 88, 185, 1982.
338. Güngör, K. E. and Winteron, R. H. S., A general correlation for flow boiling in tubes and annuli, Int. J. Heat Mass Transfer, 19(3), 351, 1986.
339. Kandlikar, S. G., A model for correlating flow boiling heat transfer in augmented tubes and compact evaporators, J. Heat Transfer, 113, 966, 1991.
340. Kandlikar, S. S., A general correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes, J. Heat Transfer, 112, 219, 1990.
341. Brown, W. T., Jr., A Study of Flow Surface Boiling, Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1967.
342. Jens, W. H. and Lottes, P. A., An Analysis of Heat Transfer, Burnout, Pressure Drop, and Density Data for High Pressure Water, Argonne National Laboratory Report ANL-4627, 1951.
343. Guglielmini, G., Nannei, E., and Pisoni, C., Warme und Stoffübertragung, 13, 177, 1980.
344. Pokhvalov, Y. E., Kronin, G. H., and Kurganova, I. V., Teploenergetika, 13, 63, 1966.
345. Thom, J. R. S., Walker, V. M., Fallon, J. S., and Reising, G. F. S., Proc. Inst. Mech. Eng., 3C/80, 226, 1965/66.
346. Rassokhin, N. G., Shvetsvov, N. K., and Kuzmin, A. V., Thermal Eng., 9, 86, 1970.
347. Forster, H. K. and Zuber, N., Dynamics of vapor bubbles and boiling heat transfer, AIChE J., 1(4), 531, 1955.
348. Mayinger, F. and Ahrens, K. H., Boiling heat transfer in the transition region from bubble flow to annular flow, International Seminar on Momentum Heat Mass Transfer in Two-Phase Energy and Chemical Systems, Dubrovnik, Yugoslavia, 1978.
349. Smith, R. A., Vaporisers: Selection Design and Operation, Longman Scientific and Technical and John Wiley and Sons, New York, 1976.
350. Cooper, M. G., Saturation nucleate pool boiling: a simple correlation, 1st U.K. Natl. Conf. Heat Transfer, I. Chem. Eng. Symp. Series, Pergamon Press, London, Vol. 2, No. 86, 785, 1984.
351. Mumm, J. F., Heat Transfer Boiling to Water Forced Through a Uniformly Heated Tube, ANL-5276, 1954.
352. Wright, R. M., Downflow Forced Convection Boiling of Water in Uniformly Heated Tube, UCRL Report, University of California at Berkley, 1961.
353. Jallouk, P. A., Two Phase Flow Pressure Drop and Heat Transfer Characteristics of Refrigerants in Vertical Tubes, Ph.D. Dissertation, University of Tennessee, 1974.
354. Chawla, J. M., Warmeubergang und Druckabfall in Waagrechten Rohren Bei Der Stromung Von Verdampfenden Kaltemitteln, VDI-Forschungsheft 523, 1967.
355. Steiner, D. and Schlünder, E. U., Heat transfer and pressure drop for boiling nitrogen flowing in a horizontal tube, in Heat Transfer in Boiling, Hahne, E. and Grigull, U., Eds., Hemisphere, Washington, DC, 1977, 263.
356. Mohr, V. and Runge, R., Forced convection boiling of neon in horizontal tubes, in Heat Transfer in Boiling, Hahne, E. and Grigull, U., Eds., Hemisphere, Washington, DC, 1977, 307.
357. Bandel, J. and Schlünder, E. U., Frictional pressure drop and convective heat transfer of gas liquid flow in horizontal tubes, Proc. 5th Int. Heat Transfer Conf., 1974, 190.
358. Kandlikar, S. G., A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes, Mechanical Engineering Dept., Rochester Institute of Technology, Rochester, NY, 1988.
359. Tubular Exchanger Manufacturers Association (TEMA), Standards of the Tubular Exchanger Manufacturers Association, 7th ed., Tarrytown, NY, 1988.
360. Butterworth, D., Condensers and their design, in Two-Phase Flow Heat Exchangers: ThermalHydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer, The Netherlands, 1988.
361. Fraas, A. P., Heat Exchanger Design, John Wiley and Sons, New York, 1989.
362. Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Taylor and Francis, Washington, D.C., 1981.
363. Bell, K. J., Preliminary design of shell and tube heat exchangers., in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Taylor and Francis, Washington, D. C., 1981, 559.
364. Taborek, J., Shell-and-tube heat exchangers, in Heat Exchanger Design Handbook, Schlünder, E. U., Ed., Hemisphere, Washington, D.C., 1983, Section 3.3.
365. Taborek, J., Industrial heat exchanger design practices, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 1991, 143.
366. Kern, D. Q., Process Heat Transfer, McGraw-Hill, New York, 1950.
367. Tinker, T., Shell-side characteristics of shell-and-tube heat exchangers, in General Discussion on Heat Transfer, Institute for Mechanical Engineering and ASME, New York and London, 1951, 97.
368. Palen, J. W. and Taborek, J., Solution of shell-side flow pressure drop and heat transfer by stream analysis method, Heat Transfer-Philadelphia, CEP Symp. Series No. 92, Vol. 66, 1969, 53.
369. Bell, K. J., Delaware method of shell-side design, in Heat Transfer Equipment Design, Shah, R. K., Sunnarao, E. C., and Mashelkar, R. A., Eds., Taylor and Francis, Washington, D.C., 1988.
370. Bell, K. J., Delaware method for shell side design, in Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Taylor and Francis, Washington D. C., 1981, 581.
371. Hewitt, G. F., Shires, G. L., and Bott, T. R., Process Heat Transfer, CRC Press, Boca Raton, FL, 1994.
372. Biniciogullari, D., Comparative study of shell-and-tube heat exchangers versus gasketed-plate heat exchangers, M.S. Thesis, METU, Ankara, 2001.
373. Webb, R. L., Principles of Enhanced Heat Transfer, John Wiley and Sons, New York, 1994.
374. Kakaç, S., Shah, R. K., and Mayinger, F., Eds., Low Reynolds Number Flow Heat Exchangers, Hemisphere, Washington, DC, 1982.
375. Kays, W. M. and London, A. L., Compact Heat Exchangers, 3rd ed., McGraw-Hill, New York, 1984.
376. Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Hemisphere, Washington, DC, 1981.
377. Fraas, A. P., Heat Exchanger Design, 2nd ed., John Wiley and Sons, New York, 1989.
378. Özisik, M. N., Heat Transfer - A Basic Approach, McGraw-Hill, New York, 1985.
379. Bejan, A., Heat Transfer, John Wiley and Sons, New York, 1993.
380. Thermal Handbook, Alfa-Laval Thermal AB, Lund, Sweden.
381. Saunders, E. A. D., Heat Exchangers - Selection, Design, and Construction, John Wiley and Sons, New York, 1988.
382. Raju, K. S. N. and Bansal, J. C., Plate heat exchangers and their performance, in Low Reynolds Number Flow Heat Exchangers, Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Hemisphere, Washington, DC, 899-912, 1983.
383. Cooper, A. and Usher, J. D., Plate heat exchangers, in Heat Exchanger Design Handbook, Schlünder, E. U., Ed., Hemisphere, Washington, DC, 1988, ch. 3.
384. Raju, K. S. N. and Bansal, J. C., Design of plate heat exchangers, in Low Reynolds Number Flow Heat Exchangers, Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Hemisphere, Washington, DC, 913-932, 1983.
385. Edwards, M. F., Heat transfer in plate heat exchangers at low Reynolds numbers, in Low Reynolds Number Flow Heat Exchangers, Kakaç, S., Shah, R. K., and Bergles, A. E., Eds., Hemisphere, Washington, DC, 933-947, 1983.
386. Wilkinson, W. L., Flow distribution in plate exchangers, Chem. Eng., No. 285, 289, 1974.
387. Marriott, J., Where and how to use plate heat exchangers, Chem. Eng., 78(8), 127, 1971.
388. Cooper, A., Suitor, J. W., and Usher, J. D., Cooling water fouling in plate heat exchangers, Heat Transfer Eng., 1(3), 50, 1980.
389. Kumar, H., The plate heat exchanger: construction and design, 1st UK National Conference on Heat Transfer, University of Leeds, 3-5 July, Inst. Chem. Symp. Series, No. 86, 1275-1286, 1984.
390. Edwards, M. F., Changal, A. A., and Parrott, D. L., Heat transfer and pressure drop characteristics of a plate heat exchanger using Newtonian and non-Newtonian liquids, Chem. Eng., 286-293, May 1974.
391. McKillop, A. A. and Dunkley, W. L., Heat transfer, Indus. Eng. Chem., 52(9), 740, 1960.
392. Clark, D. F., Plate heat exchanger design and recent development, Chem. Eng., 285, 275, 1974.
393. Manglik, R. M., Plate heat exchangers for process industry applications:enhanced thermal-hydraulic characteristics of chevron plates, in Process, Enhanced and Multiphase Heat Transfer, Manglik, R. M. and Kraus, A. D., Eds., Begel House, New York, 1996.
394. Savostin, A. F. and Tikhonov, A. M., Investigation of the characteristics of platetype heating surfaces, Thermal Eng., 17(9), 113, 1976.
395. Tovazhnyanski, L. L., Kapustenko, P. A., and Tsibulnik, V. A., Heat transfer and hydraulic resistance in channels of plate heat exchangers, Energetika, 9, 123, 1980.
396. Chisholm, D. and Wanniarachchi, A. S., Maldistribution in single-pass mixedchannel plate heat exchangers, in Compact Heat Exchangers for Power and Process Industries, HTD-Vol. 201, ASME, New York, 1992, 95.
397. Heavner, R. L., Kumar, H., and Wanniarachchi, A. S., Performance of an industrial plate heat exchanger: effect of chevron angle, AICHE Symposium Series No. 295, Vol. 89, AICHE, New York, 262, 1993.
398. Talik, A. C. and Swanson, L. W., Heat transfer and pressure drop characteristics of a plate heat exchanger using a propylene-glycol/water mixture as the working fluid, Proc. 30th Natl. Heat Transfer Conf., 12, 83, 1995.
399. Muley, A. and Manglik, R. M., Experimental investigation of heat transfer enhancement in a PHE with β = 60° chevron plates, in Heat and Mass Transfer, Tata McGraw-Hill, New Delhi, India, 1995, 737.
400. Muley, A. and Manglik, R. M., Enhanced heat transfer characteristics of singlephase flows in a plate heat exchanger with mixed chevron plates, J. Enhanced Heat Transfer, 4(3), 187, 1997.
401. Muley, A., Manglik, R. M., and Metwally, H. M., Enhanced heat transfer characteristics of viscous liquid flows in a chevron plate heat exchanger, J. Heat Transfer, 121(4), 1011, 1999.
402. Muley, A. and Manglik, R. M., Enhanced thermal-hydraulic performance of chevron plate heat exchangers, Int. J. Heat Exchangers, 1, 3, 2000.
403. Muley, A. and Manglik, R. M., Experimental study of turbulent flow heat transfer and pressure drop in a plate heat exchanger with chevron plates, J. Heat Transfer, 121(1), 110, 1999.
404. Kakaç, S., Shah, R. K., and Aung, W., Handbook of Single-Phase Convective Heat Transfer, John Wiley and Sons, New York, 1987.
405. Buonopane, R. A., Troupe, R. A., and Morgan, J. C., Heat transfer design method for plate heat exchangers, Chem. Eng. Prog., 59, 57, 1963.
406. Foote, M. R., Effective mean temperature difference in multi-pass plate heat exchangers, Nat. Eng. Lab., U.K., Report No. 303, 1967.
407. Bell, J. K., Plate heat exchanger, in Heat Exchangers - Thermal Hydraulic Fundamentals and Design, Kakaç, S., Bergles, A. E., and Mayinger, F., Eds., Hemisphere, Washington, DC, 165-176, 1981.
408. Hewitt, G. F., Shirs, G. L., and Bott, T. R., Process Heat Transfer, CRC Press, Boca Raton, FL, 1994.
409. Shah, R. K. and Focke, W. W., Plate heat exchangers and their design theory, in Heat Transfer Equipment Design, Shah, R. K., Subbarao, E. C., and Mashelkar, R. A., Eds., Hemisphere, Washington, DC, pp. 227-254, 1988.
410. Biniciogullari, D., Comparative study of shell-and-tube heat exchangers versus gasketed-plate heat exchangers, M.S. Thesis, METU, Ankara, 2001.
411. Martin, H., A theoretical approach to predict the performance of chevron-type plate heat exchangers, Chem. Eng. Process, 35, 301, 1996.
412. Wang, L., and Sundén, B., Optimal design of plate heat exchangers with and without pressure drop specifications, Appl. Thermal Eng., 23, 295, 2003.
413. Rao, B. P., Sunden, B. and Das, S., An experimental and theoretical investigation of the effect of flow maldistribution on the thermal performance of plate heat exchangers. J. Heat Transfer, 127, 332, 2005.
414. Warnakulasuriya, F. S. K. and Worek, W. M., Heat transfer and pressure drop properties of high viscous solutions in plate heat exchangers, Int. J. Heat Mass Transfer, 51, 52, 2008.
415. Gulben, G., Development of a computer program for designing a gasketed-plate heat exchanger for various working conditions and verification of the computer program with experimental data, M.S. Thesis, TOBB-ETU, Ankara, 2011.
416. Butterworth, D., Steam power plant and processes condensers, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 1991, 571.
417. Butterworth, D., Condensers and their design, in Two-Phase Flow Heat Exchangers, Kakaç, S., Bergles, A. E., and Fernandes, E. O., Eds., Kluwer, The Netherlands, 1988.
418. Mueller, A. C., Selection of condenser types, in Heat Exchanger Design Handbook, Hemisphere, Washington, DC, 1983.
419. Breber, G., Condenser design with pure vapor and mixture of vapors, in Heat Transfer Equipment Design, Shah, R. K., Subbarao, E. C., and Mashelkar, R. A., Eds., Hemisphere, Washington, DC, 1988, 477.
420. Bell, K. J. and Mueller, A. C., Condensation Heat Transfer Condenser Design, AIChE Today Series, American Institute of Chemical Engineers, New York, 1971.
421. Sebald, J. F., A development history of steam surface condensers in the electrical utility industry, Heat Transfer Eng., 1(3), 80, 1980.
422. Alfa Laval, Thermal Handbook, Lund, Sweden, 1989.
423. Taborek, J., Industrial heat transfer exchanger design practices, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 1991, 143.
424. Steinmeyer, D. E. and Muller, A. C., Why condensers don’t operate as they are supposed to, Chem. Eng. Progress, 70, 78, 1974.
425. Pate, M. B., Evaporators and condensers for refrigeration and air-conditioning systems, in Boilers, Evaporators and Condensers, Kakaç, S., Ed., John Wiley and Sons, New York, 1991.
426. Althouse, A. D., Turnquist, C. H., and Bracciano, A. F., Modern Refrigeration and Air-Conditioning, The Goodheat-Willcox Co., 1968.
427. Trane Air Conditioning Manual, The Trane Company, Lacrosce, Wisconsin, 1979.
428. Equipment Handbook, ASHRAE, Atlanta, 1988.
429. Condensers, in Equipment Handbook, ASHRAE, Atlanta, 1983, ch. 16.
430. Shah, M. M., Chart correlation for saturated boiling heat transfer: equation and further study, ASHRAE Trans., 88, 185, 1982.
431. Kandlikar, S. G., A general correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes, J. Heat Transfer, 11, 219, 1990.
432. Güngör, K. E. and Winterton, R. H. S., A general correlation for flow boiling in tubes and annuli, Int. J. Heat Mass Transfer, 29, 351, 1986.
433. Cooper, M. G., Saturated nucleate pool boiling, a simple correlation of data for isothermal two-phase two-component flow in pipes, Chem. Eng. Progress, 45(39), 39, 1949.
434. T’Joen, C., Park, Y., Wang, Q., Sommers, A., Han, X., and Jacobi, A., A review on polymer heat exchangers for HVACandR applications, International Journal of Refrigeration, 32, 763-779, 2009.
435. Reay, D., The use of polymers in heat exchangers, Heat Recovery Systems and CHP 9, 209-216, 1989.
436. Deronzier, J. C., and Bertolini, G. Plate heat exchanger in liquid crystal polymer, Applied Thermal Engineering, 17, 799-808, 1997.
437. Wharry, S. R., Jr., Fluoropolymer heat exchangers, Metal Finishing, 100, 752-762, 2002.
438. Zaheed, L. and Jachuck, R. J. J., Review of polymer compact heat exchangers, with special emphasis on a polymer film unit, Applied Thermal Engineering, 24, 2323-2358, 2004.
439. Zweben, C., Emerging high-volume applications for advanced thermally conductive materials, Proceedings of the International SAMPE Symposium and Exhibition, 49, 4046-4057, 2004a.
440. Ma, X., Chen J., Xu, D., Lin, J., Ren, C., and Long, Z., Influence of processing conditions of polymer film on dropwise condensation heat transfer, International Journal of Heat Mass Transfer, 45, 3405-3411, 2002.
441. Jacobi, A. M., Park, Y., Zhong, Y, Michna, G., and Xia, Y., High performance heat exchangers for air conditioning and refrigeration applications (non-circular tubes). ARTI-CR21/ 605-20021-01, Final Report, July 2005.
442. Gurdal, Z., Haftka, R. T., and Hajela, P., Design and optimization of laminated composite materials, Wiley, New York, 1999.
443. Bigg, D., Thermal conductivity of heterophase polymer compositions, Advances in Polymer Science, 119, 1-30, 1995.
444. Ahmed, S. and Jones, F., A review of particulate reinforcement theories for polymer composites, Journal of Material Science, 25, 4922-4942, 1990.
445. Bigg, D., Thermally conductive polymer compositions, Polymer Composites, 7, 125-140, 1986.
446. Nielsen, L.E., Mechanical Properties of Polymers and Composites, Vol. 2, Marcel Dekker, New York, 1974.
447. Mamunya, Y., Davydenko, V., Pissis, P., and Lebedev, E., Electrical and thermal conductivity of polymers filled with metal powders, European Polymer Journal, 38, 1887-1897, 2002.
448. Boudenne, A., Ibos, L., Fois, M., Gehin, E., and Majeste, J. C., Thermophysical properties of polypropylene-aluminum composites, Journal of Polymer Science part B, 42, 722-732, 2004.
449. Serkan Tekce, H., Kumlutas, D., and Tavman, I., Effect of particle shape on thermal conductivity of copper reinforced polymer composites, Journal of Reinforced Plastics and Composites, 26, 113-121, 2007.
450. Krupa, I., Novak, I., and Chodak, I., Electrically and thermally conductive polyethylene/ graphite composites and their mechanical properties, Synthetic Metals, 145, 245-252, 2004.
451. Krupa, I. and Chodak, I., Physical properties of thermoplastic/graphite composites, European Polymer Journal, 37, 2159-2168, 2001.
452. Zweben, C., Thermal materials solve power electronics challenges, Power Electronics Technology, 2006.
453. Zweben, C. H., New material options for high-power diode laser packaging, Proceedings of the SPIE, The International Society for Optical Engineering, 5336, 166-175, 2004.
454. Tzeng, J. W., Getz, G., Fedor, B. S., and Krassowski, D. W., Anisotropic Graphite Heat Spreaders for Electronics Thermal Management, Graftech, 2000.
455. Nysten, B. and Issi, J. P., Composites based on thermally hyperconductive carbon fibres, Composites, 21, 339-343, 1990.
456. Norley, J., Tzeng, J. W., Getz, G., Klug, J., and Fedor, B., The development of a natural graphite heat-spreader, 17th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 107-110, 2001.
457. Zaheed, L., Cross-corrugated polymer film compact heat exchanger (PFCHE), Ph.D. Thesis, School of Chemical and Advanced Materials, University of Newcastle Upon Tyne, United Kingdom, 2003.
458. Jordan, J., Jacob, K., Tannenbaum, R., Sharaf, M., and Jasiuk, I., Experimental trends in nanocomposites-A review, Material Science and Engineering A, 393, 1-11, 2005.
459. LeBaron, P., Wang, Z., and Pinnavaia, T., Polymer-layered silicate nanocomposites-An overview, Applied Clay Science, 15, 11-29, 1999.
460. Ahmadi, S., Huang, Y., and Li, W., Synthetic routes, properties and future applications of polymer-layered silicate nanocomposites, Journal of Material Science, 39, 1919-1925, 2004.
461. Gao, F., Clay polymer composites: the story, Materials Today, 7(11), 50-55, 2004.
462. Morcos, V. and Shafey, H., Performance analysis of a plastic shell and tube heat exchanger, Journal of Elastomers and Plastics, 27, 200-213, 1995.
463. Davidson, J., Mantell, S., Liu, W., and Raman, R., Use of polymers in liquid to liquid heat exchangers: applied to low cost solar water heating systems, Phase I, Task III report. University of Minnesota, Minnesota, 1998.
464. Freeman, A., Mantell, S., and Davidson, J., Mechanical performance of polysulfone, polybutylene and polyamide 6/6 in hot chlorinated water, Journal of Solar Energy, 79, 624-637, 2005.
465. Wu, C., Mantell, S., and Davidson, J., Polymers for solar domestic hot water:long term performance of PB and Nylon 6.6 Tubing in hot water, Journal of Solar Energy Engineering, 126, 581-586, 2004.
466. Wang, Y., Davidson, J., and Francis, L., Scaling in polymer tubes and interpretation for use in solar water heating systems, Journal of Solar Energy Engineering, 127, 3-14, 2005.
467. Liu, W., Davidson, J., and Mantell, S., Thermal analysis of polymer heat exchangers for solar water heating: a case study, Journal of Solar Energy Engineering, 122, 84-91, 2000.
468. Zakardas, D., Li, B., and Sirkar, K., Polymeric hollow fiber heat exchanger (PHFHEs): a new type of compact heat exchanger for low temperature applications, Proceedings of the 2005 ASME Heat Transfer Conference, HT2005-72590, 2005.
469. Patel, A. B. and Brisson, J. G., Design, construction and performance of plastic heat exchangers for sub-Kelvin use, Cryogenics, 40, 91-98, 2000.
470. Leigh, R. W., Isaacs, H. S., Kirley, J., and Rawe, A., Capital cost reductions in absorption chillers, ASHRAE Transactions, 95, 939-952, 1989.
471. Lowenstein, A. and Sibilia, M., A low-cost thin-film absorber/ evaporator for an absorption chiller, Final Report, Gas Research Inst., Illinois, May 1992- April 1993.
472. Lowenstein, A. I. and Sibilia, M. J., Thin plastic-film heat exchanger for absorption chillers, US Patent 5992508, 1999.
473. Bigg, D., Stickford, G., and Talbert, S., Applications of polymeric materials for condensing heat exchangers, Polymeric Engineering and Science, 29, 1111-1116, 1989.
474. El-Dessouky, H. and Ettouney, H. Plastic compact heat exchangers for single effect desalination systems, Desalination, 122, 271-289, 1999.
475. Bourouni, K., Martin, R., Tadrist, L., and Tadrist, H., Experimental investigation of evaporation performance of a desalination prototype using aero- evapocondensation process, Desalination, 114, 111-128, 1997.
476. Bums, J. and Jachuck, R., Condensation studies using cross-corrugated polymer film compact heat exchangers, Applied Thermal Engineering, 21, 495-510, 2001.
477. Cheng, L. and Van Der Geld, C., Experimental study of heat transfer and pressure drop characteristics of air/water and air-steam/water heat exchange in a polymer compact heat exchanger, Heat Transfer Engineering, 26, 18-27, 2005.
478. Van Der Geld, C., Ganzevles, F., Simons, C., and Weitz, F., Geometry adaptations to improve the performance of compact polymer heat exchangers, Transactions IChemE: Part A, 79, 357-362, 2001.
479. Harris, C., Kelly, K., Wang, T., McCandless, A., and Motakef, S., Fabrication, modeling and testing of micro-cross flow heat exchangers, Journal of Microelectromechanical Systems, 11, 726-735, 2002.
480. Rousse, D., Martin, D., Theriault, R., Leveillee, F., and Boily, R., Heat recovery in greenhouses: a practical solution, Applied Thermal Engineering, 20, 687-706, 2000.
481. Jia, J., Peng, X., Sun, J., and Chen, T., An experimental study on vapor condensation of wet flue gas in a plastic heat exchanger, Heat Transfer - Asian Research, 30, 571-580, 2001.
482. Saman, W. and Alizadeh, S., Modeling and performance analysis of a cross-flow type plate heat exchanger for dehumidification/cooling, Solar Energy, 70(4), 361-372, 2001.
483. Saman, W. and Alizadeh, S., An experimental study of a cross flow type plate heat exchanger for dehumidification/cooling, Official Journal of AIRAH, 1(8), 26-30, 2002.
484. Bahadur, R. and Cohen, A., Thermal design and optimization of staggered polymer pin fin natural convection heat sinks, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, 1, 268-275, 2004.
485. Norley, J., Tzeng, J. W., and Klug, J., Graphite-based heat sink, US Patent 6503626, 2003.
486. Norley, J. and Chen, G.G., High performance, lightweight graphite heat sinks/ spreaders, Proceedings of PCIM 2002, Nürnberg, 2002.
487. Marotta, E. E., Ellsworth Jr., M. J., Norley, J., and Getz, G., The development of a bonded fin graphite/epoxy heat sink for high performance, Advances in Electronic Packaging, 2, 139-146, 2003.
488. Shives, G., Norley, J., Smalc, M., Chen, G., and Capp, J., Comparative thermal performance evaluation of graphite/ epoxy fin heat sinks, Thermomechanical Phenomena in Electronic Systems-Proceedings of the Intersociety Conference, 1, 410-417, 2004.
489. Chen, L., Li, Z., and Guo, Y., Experimental investigation of plastic finned- tube heat exchangers, with emphasis on material thermal conductivity, Experimental Thermal Fluid and Science, 33(5), 922-928, 2009.
490. Dobbs, G. M., Plate type heat exchanger, US Patent Application No. 20020185266, 2002.
491. Reay, D. A., Polymer Heat Exchangers: Exploitation of the Technology--A Discussion of Some Options, David Reay and Associates, Newcastle, 2000.
492. Sterem, F., Polymer heat exchangers, available from , 19 November 2003.
493. Ametek, AMETEK Brochure, Heat exchangers of Teflon, Case History, US, 1990.
494. Fischer, G., Compact all plastic heat exchanger, available from 19 November 2003.
495. Ferreira, C. A. I., Compact Air-Refrigerant Evaporator, 2000, available from 11 October 1999.
496. Morcos, V. H. and Shafey, H. M., Performance analysis of a plastic shell and tube heat exchanger, Journal of Elastomers and Plastics, 27(2), 200-213, 1995.
497. Perry, C. R., Dietz, L. H. S., and Shannon, R. L., Heat exchange apparatus having thin film flexible Sheets, The Boeing Company, US Patent No. 4411310, 1983.
498. Shuster, J. and Cesaroni, A. J., Heat exchanger fabricated from polymer compositions, US Patent No. 4955435, 1990.
499. Metwally, M. N., AbouZiyan, H. Z., and ElLeathy, A. M., Performance of advanced corrugated duct solar air collector compared with five conventional designs, Renewable Energy, 10(4), 519-537, 1997.
500. Smith, W. F., Solar energy absorber, US Patent No. 4763641, 1988.
501. Gush, H. P., A compact low thermal conductivity support for cryogenic use, Review of Scientific Instruments, 62(4), 1106-1108, 1991.
502. Patel, A. B. and Brisson, J. G., Experimental performance of a single stage superfluid Stirling refrigerator using a small plastic recuperator, Journal of Low Temperature Physics, 111(1-2), 210-212, 1998.
503. Welles, C. G., Portable heat generating device, US Patent No. 6062210, 2000.
504. Moore, D. A., Molded heat exchanger structure for portable computer, Compaq Computer Corporation, US Patent No. 6026888, 2000.
505. Martin, G. L., Johnson, J. E., and Sparrow, E. E. M., Air-to-air heat and moisture heat exchanger, US Patent No. 6145588, 2000.
506. Georg, P., Dittman, B., Golbis, K., Stastna, J., Hohmann, M., Oberbeck, S., and Schwalbe, T., Miniaturised reaction apparatus, Cellular Process Chemistry, European Patent No. EP1123734, 2001.
507. Piao, C. C., Sakamoto, R., Watanabe, Y., Yoshimi, M., and Yanemoto, K., Air-conditioner, US Patent No. 6484525, 2002.
508. Haogland, L. C., Desiccant-free heat and moisture exchange wheel, US Patent No. 6565999, 2003.