Production, characterization and performance of biodiesel as an alternative fuel in diesel engines – A review

Renewable and Sustainable Energy Reviews

Volumn 72, Issue , 2017, Pages 497-509

  Mahmudul, H M ^a   Hagos, F Y ^a   Mamat, R ^a   Adam, A Abdul ^a   Ishak, W F W ^a   Alenezi, R ^b  

^a UNIVERSITY MALAYSIA PAHANG   (Malaysia)

^b The Public Authority for Applied Education and Training   (Kuwait)

Author keywords

Biodiesel; Emission; Engine performance; Global energy demand; Transportation sector

Indexed keywords

ALTERNATIVE FUELS; BIODIESEL; COMBUSTION; DECISION MAKING; DIESEL FUELS; FOSSIL FUELS; GEOTHERMAL ENERGY; SOLAR ENERGY; WIND POWER;

BIODIESEL PRODUCTION; EMISSION; ENERGY; ENGINE PERFORMANCE; GLOBAL ENERGY DEMAND; IMPACT ON THE ENVIRONMENT; PERFORMANCE; POLICY MAKERS; PRODUCTION PROCESS; TRANSPORTATION SECTOR;

DIESEL ENGINES;

EID: 85009872715     PISSN: 13640321     EISSN: 18790690     Source Type: Journal    
DOI: 10.1016/j.rser.2017.01.001     Document Type: Review

References (191)

1. [1] International Energy Outlook 2040; June 2013.
2. [2] Gorham, R., An assessment of causes, strategies and tactics, and proposed actions for the international community. 2002, Division for Sustainable Development, Department of Economic and Social Affairs 〈http://www.un.org/esa/gite/csd/gorham.pdf〉.
3. [3] Mofijur, M., Rasul, M.G., Hyde, J., et al. Role of biofuel and their binary (diesel–biodiesel) and ternary (ethanol–biodiesel–diesel) blends on internal combustion engines emission reduction. Renew Sustain Energy Rev 53 (2016), 265–278.
4. [4] Nick Allen Green house gas reduction in transportation-an Energy industry perspective. JSAE International Powertrain, Fuel and Lubes Meeting. Kyoto, Japan August 30-September 2; 2011.
5. [5] Malaysian Energy Statistics Handbook; 2014.
6. [6] Shahida, S., Minhansb, A., Puanb, O.C., Assessment of greenhouse gas emission reduction measures in transportation sector of Malaysia. J Teknol 70 (2014), 1–8.
7. [7] Rahman, M.M., Rasul, M., et al., Hassan, N.M.S., Study on the Tribological Characteristics of Australian Native First Generation and Second Generation Biodiesel Fuel. Energies, 2017, 10–55.
8. [8] Silitonga, A.S., Atabani, A.E., Mahlia, T.M.I., et al. A review on prospect of Jatropha curcas for biodiesel in Indonesia. Renew Sustain Energy Rev 15 (2011), 3733–3756.
9. [9] Advanced Biofuels Study Strategic Directions for Australia. L.E.K.; 2011.
10. [10] Jayed, M.H., Masjuki, H.H., Kalam, M.A., et al. Prospects of dedicated biodiesel engine vehicles in Malaysia and Indonesia. Renew Sustain Energy Rev 15 (2011), 220–235.
11. [11] Lin, L., Cunshan, Z., Vittayapadung, S., et al. Opportunities and challenges for biodiesel fuel. Appl Energy 88 (2011), 1020–1031.
12. [12] Mofijur, M., Masjuki, H.H., Kalam, M.A., et al. Effect of biodiesel from various feedstocks on combustion characteristics, engine durability and materials compatibility: a review. Renew Sustain Energy Rev 28 (2013), 441–455.
13. [13] Atabani, A.E., Silitonga, A.S., Badruddin, I.A., et al. A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renew Sustain Energy Rev 16 (2012), 2070–2093.
14. [14] Atabani, A.E., Silitonga, A.S., Ong, H.C., et al. Non-edible vegetable oils: a critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production. Renew Sustain Energy Rev 18 (2013), 211–245.
15. [15] Mofijur, M., Rasul, M.G., Hassan, N.M.S., Masjuki, H.H., Kalam, M.A., Mahmudul, H.M., Assessment of physical, chemical and tribological properties of different biodiesel fuel. Rasul, M., (eds.) Clean Energy for Sustainable Development, 1, 2016, Elsevier, Amsterdam, the Netherlands, 441–461.
16. [16] Avinash, A., Subramaniam, D., Murugesan, A., Bio-diesel—A global scenario. Renew Sustain Energy Rev 29 (2014), 517–527.
17. [17] Shahir, S.A., Masjuki, H.H., Kalam, M.A., et al. Feasibility of diesel–biodiesel–ethanol/bioethanol blend as existing CI engine fuel: an assessment of properties, material compatibility, safety and combustion. Renew Sustain Energy Rev 32 (2014), 379–395.
18. [18] Sharma, Y.C., Singh, B., Development of biodiesel: current scenario. Renew Sustain Energy Rev 13 (2009), 1646–1651.
19. [19] Balat, M., Balat, H., Progress in biodiesel processing. Appl Energy 87 (2010), 1815–1835.
20. [20] Lim, S., Teong, L.K., Recent trends, opportunities and challenges of biodiesel in Malaysia: an overview. Renew Sustain Energy Rev 14 (2010), 938–954.
21. [21] Gui, M.M., Lee, K.T., Bhatia, S., Feasibility of edible oil vs. non-edible oil vs. waste edible oil as biodiesel feedstock. Energy 33 (2008), 1646–1653.
22. [22] Hathurusingha, S., Retraction notice to “periodic variation in kernel oil content and fatty acid profiles of Calophyllum inophyllum L.: a medicinal plant in northern Australia”. Ind Crops Prod, 46, 2013, 268 [Ind. Crops Prod. 33 (May (3)] [(2011] [775–778].
23. [23] Bhuiya MMK, Rasul MG, Khan MMK et al. Prospects of 2nd generation biodiesel as a sustainable fuel—Part: 1 selection of feedstocks, oil extraction techniques and conversion technologies. Renew Sustain Energy Rev 2016; 55: 1109-28.
24. [24] Habibullah, M., Masjuki, H.H., Kalam, M.A., et al. Potential of biodiesel as a renewable energy source in Bangladesh. Renew Sustain Energy Rev 50 (2015), 819–834.
25. [25] Jayed, M.H., Masjuki, H.H., Saidur, R., et al. Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia. Renew Sustain Energy Rev 13 (2009), 2452–2462.
26. [26] Masjuki, H.H., Biofuel engine: a new challange. 2010, International & Corporate relation office, University of Malaya, Kuala Lumpur, 1–56.
27. [27] Silitonga, A.S., Masjuki, H.H., Mahlia, T.M.I., et al. Schleichera oleosa L oil as feedstock for biodiesel production. Fuel 156 (2015), 63–70.
28. [28] Hassan, N.M.S., Rasul, M.G., Harch, C.A., Modelling and experimental investigation of engine performance and emissions fuelled with biodiesel produced from Australian Beauty Leaf Tree. Fuel 150 (2015), 625–635.
29. [29] Azad, A.K., Rasul, M.G., Khan, M.M.K., et al. Prospect of biofuels as an alternative transport fuel in Australia. Renew Sustain Energy Rev 43 (2015), 331–351.
30. [30] Silitonga, A.S., Ong, H.C., Mahlia, T.M.I., et al. Biodiesel conversion from high FFA Crude Jatropha Curcas, Calophyllum Inophyllum and Ceiba Pentandra oil. Energy Proc 61 (2014), 480–483.
31. [31] Atabani, A.E., Mofijur, M., Masjuki, H.H., et al. Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel–diesel blending on their physico-chemical properties. Ind Crops Prod 60 (2014), 130–137.
32. [32] Hasan, A.P., Wakil, M.A., Kafy, M.A., Prospect of rice bran for biodiesel production in Bangladesh. Proc Eng 90 (2014), 746–752.
33. [33] Lin, L., Ying, D., Chaitep, S., Vittayapadung, S., Biodiesel production from crude rice bran oil and properties as fuel. Appl Energy 86 (2009), 681–688.
34. [34] Ilkılıç, C., Aydın, S., Behcet, R., Aydin, H., Biodiesel from safflower oil and its application in a diesel engine. Fuel Process Technol 92 (2011), 356–362.
35. [35] Ong, H.C., Silitonga, A.S., Masjuki, H.H., et al. Production and comparative fuel properties of biodiesel from non-edible oils: Jatropha curcas, Sterculia foetida and Ceiba pentandra. Energy Convers Manag 73 (2013), 245–255.
36. [36] Atabani, A.E., Mahlia, T.M.I., Anjum Badruddin, I., et al. Investigation of physical and chemical properties of potential edible and non-edible feedstocks for biodiesel production, a comparative analysis. Renew Sustain Energy Rev 21 (2013), 749–755.
37. [37] Mofijur, M., Masjuki, H.H., Kalam, M.A., et al. Properties and use of Moringa oleifera biodiesel and diesel fuel blends in a multi-cylinder diesel engine. Energy Convers Manag 82 (2014), 169–176.
38. [38] Mofijur, M., Masjuki, H.H., Kalam, M.A., et al. Prospects of biodiesel from Jatropha in Malaysia. Renew Sustain Energy Rev 16 (2012), 5007–5020.
39. [39] Mofijur, M., Masjuki, H.H., Kalam, M.A., Atabani, A.E., Evaluation of biodiesel blending, engine performance and emissions characteristics of Jatropha curcas methyl ester: Malaysian perspective. Energy 55 (2013), 879–887.
40. [40] Wan Ghazali, W.N.M., Mamat, R., Masjuki, H.H., Najafi, G., Effects of biodiesel from different feedstocks on engine performance and emissions: a review. Renew Sustain Energy Rev 51 (2015), 585–602.
41. [41] Hoekman, S.K., Broch, A., Robbins, C., et al. Review of biodiesel composition, properties, and specifications. Renew Sustain Energy Rev 16 (2012), 143–169.
42. [42] Demirbas, A., Biodiesel production from vegetable oils via catalytic and non-catalytic supercritical methanol transesterification methods. Prog Energy Combust Sci 31 (2005), 466–487.
43. [43] Demirbas, A., Progress and recent trends in biodiesel fuels. Energy Convers Manag 50 (2009), 14–34.
44. [44] Canakci, M., Combustion characteristics of a turbocharged DI compression ignition engine fueled with petroleum diesel fuels and biodiesel. Bioresour Technol 98 (2007), 1167–1175.
45. [45] Agarwal, A.K., Rajamanoharan, K., Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines. Prog Energy Combust Sci 33 (2007), 233–271.
46. [46] Balat, M., Potential alternatives to edible oils for biodiesel production - A review of current work. Energy Convers Manag 52 (2011), 1479–1492.
47. [47] Abbaszaadeh, A., Ghobadian, B., Omidkhah, M.R., Najafi, G., Current biodiesel production technologies: a comparative review. Energy Convers Manag 63 (2012), 138–148.
48. [48] Gerpen, J.V., Biodiesel processing and production. Fuel Process Technol 86 (2005), 1097–1107.
49. [49] Sanjid, A., Masjuki, H.H., Kalam, M.A., et al. Production of palm and jatropha based biodiesel and investigation of palm-jatropha combined blend properties, performance, exhaust emission and noise in an unmodified diesel engine. J Clean Prod 65 (2014), 295–303.
50. [50] Shahid, E.M., Jamal, Y., Production of biodiesel: a technical review. Renew Sustain Energy Rev 15 (2011), 4732–4745.
51. [51] Silitonga, A.S., Ong, H.C., Mahlia, T.M.I., et al. Biodiesel conversion from high FFA Crude Jatropha Curcas, Calophyllum Inophyllum and Ceiba Pentandra oil. Energy Proc 61 (2014), 480–483.
52. [52] Singh, S.P., Singh, D., Biodiesel production through the use of different sources and characterization of oils and their esters as the substitute of diesel: a review. Renew Sustain Energy Rev 14 (2010), 200–216.
53. [53] Atabani, A.E., Mahlia, T.M.I., MH, H., et al. A comparative evaluation of physical and chemical properties of biodiesel synthesized from edible and non-edible oils and study on the effect of biodiesel blending. Energy 58 (2013), 296–304.
54. [54] Parawira W. Biodiesel production from Jatropha curcas: A review; 2010. 5: 1796-808.
55. [55] Jain, S., Sharma, M.P., Biodiesel production from Jatropha curcas oil. Renew Sustain Energy Rev 14 (2010), 3140–3147.
56. [56] Labeckas, G., Slavinskas, S., he effect of rapeseed oil methyl ester on direct injection diesel engine performance and exhaust emissions. Energ Convers Manag 47 (2006), 1954–1967.
57. [57] Ramadhas, A.S., Jayaraj, S., Muraleedharan, C., Characterization and effect of using rubber seed oil as fuel in the compression ignition engines. Renew Energy 30 (2005), 795–803.
58. [58] Liaquat, A.M., Masjuki, H.H., Kalam, M.A., et al. Impact of palm biodiesel blend on injector deposit formation. Appl Energy 111 (2013), 882–893.
59. [59] Fazal, M., Haseeb, A., Masjuki, H., Biodiesel feasibility study: an evaluation of material compatibility; performance; emission and engine durability. Renew Sustain Energy Rev 15 (2011), 1314–1324.
60. [60] Fazal, M.A., Haseeb, A.S.M.A., Masjuki, H.H., A critical review on the tribological compatibility of automotive materials in palm biodiesel. Energy Convers Manag 79 (2014), 180–186.
61. [61] Namasivayam, A.M., Korakianitis, T., Crookes, R.J., et al. Biodiesel, emulsified biodiesel and dimethyl ether as pilot fuels for natural gas fuelled engines. Appl Energy 87 (2010), 769–778.
62. [62] Maher, K.D., Bressler, D.C., Pyrolysis of triglyceride materials for the production of renewable fuels and chemicals. Bioresour Technol 98 (2007), 2351–2368.
63. [63] Habibullah, M., Masjuki, H.H., Kalam, M.A., et al. Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine. Energy Convers Manag 87 (2014), 250–257.
64. [64] Atabani, A.E., César, Ad.S., Calophyllum inophyllum L. – A prospective non-edible biodiesel feedstock. Study of biodiesel production, properties, fatty acid composition, blending and engine performance. Renew Sustain Energy Rev 37 (2014), 644–655.
65. [65] Patil, P.D., Deng, S., Optimization of biodiesel production from edible and non-edible vegetable oils. Fuel 88 (2009), 1302–1306.
66. [66] Xin, J., Imahara, H., Saka, S., Oxidation stability of biodiesel fuel as prepared by supercritical methanol. Fuel 87 (2008), 1807–1813.
67. [67] Mat Yasin, M.H., Yusaf, T., Mamat, R., Fitri Yusop, A., Characterization of a diesel engine operating with a small proportion of methanol as a fuel additive in biodiesel blend. Appl Energy 114 (2014), 865–873.
68. [68] Kalam, M.A., Masjuki, H.H., Biodiesel from palmoil—an analysis of its properties and potential. Biomass- Bioenergy 23 (2002), 471–479.
69. [69] Porte, A.F., Schneider, Rd.CdS., Kaercher, J.A., et al. Sunflower biodiesel production and application in family farms in Brazil. Fuel 89 (2010), 3718–3724.
70. [70] Rakopoulos, D.C., Heat release analysis of combustion in heavy-duty turbocharged diesel engine operating on blends of diesel fuel with cottonseed or sunflower oils and their bio-diesel. Fuel 96 (2012), 524–534.
71. [71] Ulusoy, Y., Arslan, R., Kaplan, C., Emission Characteristics of Sunflower Oil Methyl Ester. Energy Sources Part A: Recover Util Environ Eff 31 (2009), 906–910.
72. [72] Kalam, M.A., Masjuki, H.H., Jayed, M.H., Liaquat, A.M., Emission and performance characteristics of an indirect ignition diesel engine fuelled with waste cooking oil. Energy 36 (2011), 397–402.
73. [73] Mukherjee, I., Sovacool, B.K., Palm oil-based biofuels and sustainability in southeast Asia: a review of Indonesia, Malaysia, and Thailand. Renew Sustain Energy Rev 37 (2014), 1–12.
74. [74] Imtenan, S., Masjuki, H.H., Varman, M., et al. Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine. Energy Convers Manag 83 (2014), 149–158.
75. [75] Dorado, M.P., Ballesteros, E., Arnal, J.M., et al. Testing waste olive oil methyl ester as a fuel in a diesel engine. Energy Fuels 17 (2003), 1560–1565.
76. [76] Redel-Macías, M.D., Pinzi, S., Leiva, D., et al. Air and noise pollution of a diesel engine fueled with olive pomace oil methyl ester and petrodiesel blends. Fuel 95 (2012), 615–621.
77. [77] Bhuiya, M.M.K., Rasul, M.G., Khan, M.M.K., et al. Second generation biodiesel: potential alternative to-edible oil-derived biodiesel. Energy Proc 61 (2014), 1969–1972.
78. [78] Usta, N., An experimental study on performance and exhaust emissions of a diesel engine fuelled with tobacco seed oil methyl ester. Energy Convers Manag 46 (2005), 2373–2386.
79. [79] Sahoo, P.K., Das, L.M., Combustion analysis of Jatropha, Karanja and Polanga based biodiesel as fuel in a diesel engine. Fuel 88 (2009), 994–999.
80. [80] Sanjid, A., Masjuki, H.H., Kalam, M.A., et al. Impact of palm, mustard, waste cooking oil and Calophyllum inophyllum biofuels on performance and emission of CI engine. Renew Sustain Energy Rev 27 (2013), 664–682.
81. [81] Silitonga, A.S., Masjuki, H.H., Mahlia, T.M.I., et al. Overview properties of biodiesel diesel blends from edible and non-edible feedstock. Renew Sustain Energy Rev 22 (2013), 346–360.
82. [82] Silitonga, A.S., Ong, H.C., Mahlia, T.M.I., et al. Characterization and production of Ceiba pentandra biodiesel and its blends. Fuel 108 (2013), 855–858.
83. [83] Oliveira L, Da Silva M. Comparative study of calorific value of rapeseed, soybean, Jatropha curcas and crambe biodiesel. International Conference on Renewable Energies and Power Quality (ICREPQ’13) Bilbao (Spain); 2013. p. 20-22; 2013.
84. [84] Ashraful, A.M., Masjuki, H., Kalam, M., et al. Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: a review. Energy Convers Manag 80 (2014), 202–228.
85. [85] Knothe, G., Dunn, R.O., Dependence of oil stability index of fatty compounds on their structure and concentration and presence of metals. J Am Oil Chem' Soc 80 (2003), 1021–1026.
86. [86] Jain, S., Sharma, M., Stability of biodiesel and its blends: a review. Renew Sustain Energy Rev 14 (2010), 667–678.
87. [87] Isbell, T., Abbott, T., Carlson, K., Oxidative stability index of vegetable oils in binary mixtures with meadowfoam oil. Ind Crops Prod 9 (1999), 115–123.
88. [88] Tian, K., Dasgupta, P.K., Determination of oxidative stability of oils and fats. Anal Chem 71 (1999), 1692–1698.
89. [89] Prankl, H., Wörgetter, M., Influence of the iodine number of biodiesel to the engine performance. Liq Fuels Ind Prod Renew Resour, 1996, 191–196.
90. [90] FRMS, Raj, Sahayaraj, J.W., A comparative study over alternative fuel (biodiesel) for environmental friendly emission. Recent Adv Space Technol Serv Clim Change 2010 (2010), 80–86.
91. [91] Saluja, R.K., Kumar, V., Sham, R., Stability of biodiesel–A review. Renew Sustain Energy Rev 62 (2016), 866–881.
92. [92] Van Gerpen J. Cetane number testing of biodiesel. In: Proceedings of the third liquid fuels conference; 1996. p. 197–206.
93. [93] Clothier, P., Aguda, B., Moise, A., Pritchard, H., How do diesel-fuel ignition improvers work?. Chem Soc Rev 22 (1993), 101–108.
94. [94] Canakci, M., Monyem, A., Van Gerpen, J., Accelerated oxidation processes in biodiesel. Trans ASAE, 42, 1999, 1565.
95. [95] Dunn, R.O., Effect of oxidation under accelerated conditions on fuel properties of methyl soyate (biodiesel). J Am Oil Chem' Soc 79 (2002), 915–920.
96. [96] Gan, L., Ooi, K., Gan, L., Goh, S., Effects of epoxidation on the thermal oxidative stabilities of fatty acid esters derived from palm olein. J Am Oil Chemists’ Soc 72 (1995), 439–442.
97. [97] Rao, P.V., Experimental investigations on the Influence of properties of Jatropha biodiesel on performance, combustion, and emission characteristics of a DI-CI engine. World Acad Sci Eng Technol 75 (2011), 855–868.
98. [98] Alptekin, E., Canakci, M., Characterization of the key fuel properties of methyl ester–diesel fuel blends. Fuel 88 (2009), 75–80.
99. [99] Ghazali, W.N.M.W., Mamat, R., Masjuki, H., Najafi, G., Effects of biodiesel from different feedstocks on engine performance and emissions: a review. Renew Sustain Energy Rev 51 (2015), 585–602.
100. [100] Liaquat, A.M., Masjuki, H.H., Kalam, M.A., et al. Effect of coconut biodiesel blended fuels on engine performance and emission characteristics. Proc Eng 56 (2013), 583–590.
101. [101] Liaquat, A.M., Masjuki, H.H., Kalam, M.A., et al. Application of blend fuels in a diesel engine. Energy Proc 14 (2012), 1124–1133.
102. [102] McCarthy, P., Rasul, M.G., Moazzem, S., Analysis and comparison of performance and emissions of an internal combustion engine fuelled with petroleum diesel and different bio-diesels. Fuel 90 (2011), 2147–2157.
103. [103] Meng, X., Chen, G., Wang, Y., Biodiesel production from waste cooking oil via alkali catalyst and its engine test. Fuel Process Technol 89 (2008), 851–857.
104. [104] Misra, R.D., Murthy, M.S., Performance, emission and combustion evaluation of soapnut oil-diesel blends in a compression ignition engine. Fuel 90 (2011), 2514–2518.
105. [105] Atabani, A.E., Silitonga, A.S., Badruddin, I.A., et al. A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renew Sustain Energy Rev 16 (2012), 2070–2093.
106. [106] Bhuiya, M., Rasul, M., Khan, M., et al. Prospects of 2nd generation biodiesel as a sustainable fuel–Part 2: properties, performance and emission characteristics. Renew Sustain Energy Rev 55 (2016), 1129–1146.
107. [107] Sajjadi, B., Raman, A.A.A., Arandiyan, H., A comprehensive review on properties of edible and non-edible vegetable oil-based biodiesel: composition, specifications and prediction models. Renew Sustain Energy Rev 63 (2016), 62–92.
108. [108] Balat, M., Potential alternatives to edible oils for biodiesel production–A review of current work. Energy Convers Manag 52 (2011), 1479–1492.
109. [109] Karmakar, A., Karmakar, S., Mukherjee, S., Properties of various plants and animals feedstocks for biodiesel production. Bioresour Technol 101 (2010), 7201–7210.
110. [110] Rashid, U., Anwar, F., Knothe, G., Evaluation of biodiesel obtained from cottonseed oil. Fuel Process Technol 90 (2009), 1157–1163.
111. [111] Shannon D. Sanford* JMW, Parag S. Shah, Claudia Wee MAV, and Glen R. Meier. Feedstock and Biodiesel Characteristics Report; 2009.
112. [112] Masjuki, H., Biofuel engine: a new challenge. 2010, University of Malaya, Malaysia.
113. [113] Fernando, S., Karra, P., Hernandez, R., Jha, S.K., Effect of incompletely converted soybean oil on biodiesel quality. Energy 32 (2007), 844–851.
114. [114] Van Gerpen, J., Biodiesel processing and production. Fuel Process Technol 86 (2005), 1097–1107.
115. [115] Mittelbach, M., Diesel fuel derived from vegetable oils, VI: specifications and quality control of biodiesel. Bioresour Technol 56 (1996), 7–11.
116. [116] Chauhan, B.S., Kumar, N., Jun, Y.D., Lee, K.B., Performance and emission study of preheated Jatropha oil on medium capacity diesel engine. Energy 35 (2010), 2484–2492.
117. [117] Chauhan, B.S., Kumar, N., Cho, H.M., A study on the performance and emission of a diesel engine fueled with Jatropha biodiesel oil and its blends. Energy 37 (2012), 616–622.
118. [118] Choi, C., Reitz, R., A numerical analysis of the emissions characteristics of biodiesel blended fuels. J Eng Gas Turbines Power 121 (1999), 31–37.
119. [119] Bahadur, N.P., Boocock, D.G., Konar, S.K., Liquid hydrocarbons from catalytic pyrolysis of sewage sludge lipid and canola oil: evaluation of fuel properties. Energy fuels 9 (1995), 248–256.
120. [120] Ali, Y., Hanna, M.A., Cuppett, S.L., Fuel properties of tallow and soybean oil esters. J Am Oil Chemists’ Soc 72 (1995), 1557–1564.
121. [121] Szybist, J.P., Song, J., Alam, M., Boehman, A.L., Biodiesel combustion, emissions and emission control. Fuel Process Technol 88 (2007), 679–691.
122. [122] Arbab, M.I., Masjuki, H.H., Varman, M., et al. Fuel properties, engine performance and emission characteristic of common biodiesels as a renewable and sustainable source of fuel. Renew Sustain Energy Rev 22 (2013), 133–147.
123. [123] Atadashi, I.M., Aroua, M.K., Abdul Aziz, A.R., Sulaiman, N.M.N., Production of biodiesel using high free fatty acid feedstocks. Renew Sustain Energy Rev 16 (2012), 3275–3285.
124. [124] Atadashi, I.M., Aroua, M.K., Aziz, A.A., High quality biodiesel and its diesel engine application: a review. Renew Sustain Energy Rev 14 (2010), 1999–2008.
125. [125] Dwivedi, G., Sharma, M.P., Prospects of biodiesel from Pongamia in India. Renew Sustain Energy Rev 32 (2014), 114–122.
126. [126] Jain, S., Sharma, M.P., Prospects of biodiesel from Jatropha in India: a review. Renew Sustain Energy Rev 14 (2010), 763–771.
127. [127] Boog, J.H.F., Silveira, E.L.C., De Caland, L.B., Tubino, M., Determining the residual alcohol in biodiesel through its flash point. Fuel 90 (2011), 905–907.
128. [128] Carareto, N.D., Kimura, C.Y., Oliveira, E.C., et al. Flash points of mixtures containing ethyl esters or ethylic biodiesel and ethanol. Fuel 96 (2012), 319–326.
129. [129] Gashaw, A., Teshita, A., Production of biodiesel from waste cooking oil and factors affecting its formation: a review. Int J Renew Sustain Energy 3 (2014), 92–98.
130. [130] Kinast J. Production of biodiesels from multiple feedstocks and properties of biodiesels and biodiesel/diesel blends. NREL Final Report, SR-510-31460; 2003.
131. [131] Agarwal, A.K., Das, L.M., Biodiesel development and characterization for use as a fuel in compression ignition engines. J Eng Gas Turbines Power 123 (2001), 440–447.
132. [132] Canakci, M., Sanli, H., Biodiesel production from various feedstocks and their effects on the fuel properties. J Ind Microbiol Biotechnol 35 (2008), 431–441.
133. [133] Knothe, G., Matheaus, A.C., Ryan, T.W., Cetane numbers of branched and straight-chain fatty esters determined in an ignition quality tester☆. Fuel 82 (2003), 971–975.
134. [134] Rizwanul Fattah, I.M., Masjuki, H.H., Kalam, M.A., et al. Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors. Energy Convers Manag 83 (2014), 232–240.
135. [135] Rizwanul Fattah, I.M., Masjuki, H.H., Liaquat, A.M., et al. Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions. Renew Sustain Energy Rev 18 (2013), 552–567.
136. [136] Mofijur, M., Hazrat, M.A., Rasul, M.G., Mahmudul, H.M., Comparative evaluation of edible and non-edible oil methyl ester performance in a vehicular engine. Energy Proc 75 (2015), 37–43.
137. [137] Mofijur, M., Masjuki, H.H., Kalam, M.A., et al. Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine. Ind Crops Prod 53 (2014), 78–84.
138. [138] Munoz, R.A., Correia, P.R., Nascimento, A.N., et al. Electroanalysis of crude oil and petroleum-based fuel for trace metals: evaluation of different microwave-assisted sample decompositions and stripping techniques. Energy Fuels 21 (2007), 295–302.
139. [139] Almeida, E.S., Monteiro, M.A.N.A., Montes, R.H.O., et al. Direct determination of copper in biodiesel using stripping analysis. Electroanalysis 22 (2010), 1846–1850.
140. [140] Demirbas, A., Biodiesel: a realistic fuel alternative for diesel engines. 2008, Springer, London.
141. [141] Yusuf, N.N.A.N, Kamarudin, S.K., Yaakub, Z., Overview on the current trends in biodiesel production. Energy Convers Manag 52 (2010), 2741–2751.
142. [142] Westbrook, S.R., Significance of tests for petroleum products. 7th ed., 2003, ASTM International, West Conshohocken, PA, 63–81 S.J.
143. [143] Ali, O.M., Mamat, R., Abdullah, N.R., Abdullah, A.A., Analysis of blended fuel properties and engine performance with palm biodiesel–diesel blended fuel. Renew Energy 86 (2016), 59–67.
144. [144] Pali, H.S., Kumar, N., Alhassan, Y., Performance and emission characteristics of an agricultural diesel engine fueled with blends of Sal methyl esters and diesel. Energy Convers Manag 90 (2015), 146–153.
145. [145] Öztürk, E., Performance, emissions, combustion and injection characteristics of a diesel engine fuelled with canola oil–hazelnut soapstock biodiesel mixture. Fuel Process Technol 129 (2015), 183–191.
146. [146] Özçelik, A.E., Aydoğan, H., Acaroğlu, M., Determining the performance, emission and combustion properties of camelina biodiesel blends. Energy Convers Manag 96 (2015), 47–57.
147. [147] Mofijur, M., Masjuki, H.H., Kalam, M.A., et al. Energy scenario and biofuel policies and targets in ASEAN countries. Renew Sustain Energy Rev 46 (2015), 51–61.
148. [148] Yang, L., Takase, M., Zhang, M., et al. Potential non-edible oil feedstock for biodiesel production in Africa: a survey. Renew Sustain Energy Rev 38 (2014), 461–477.
149. [149] Labeckas, G., Slavinskas, S., Combustion phenomenon, performance and emissions of a diesel engine with aviation turbine JP-8 fuel and rapeseed biodiesel blends. Energy Convers Manag 105 (2015), 216–229.
150. [150] Altaie, M.A.H., Janius, R.B., Rashid, U., et al. Performance and exhaust emission characteristics of direct-injection diesel engine fueled with enriched biodiesel. Energy Convers Manag 106 (2015), 365–372.
151. [151] Rajaraman S, Yashwanth GK, Rajan T et al. Experimental investigations of performance and emission characteristics of Moringa oil methyl ester and its diesel blends in a single cylinder direct injection diesel engine. Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition, November 13–19, Lake Buena Vista, Florida, USA; 2009.
152. [152] Selvam, D.J.P., Vadivel, K., Performance and emission analysis of DI diesel engine fuelled with methyl esters of beef tallow and diesel blends. Proc Eng 38 (2012), 342–358.
153. [153] Mohanty C, Jaiswal A, Meda V, Behera P. An Experimental Investigation on the Combustion, Performance and Emissions of a Diesel Engine Using Vegetable Oil-Diesel Fuel Blends. SAE Technical Paper; 2011-01-1187; 2011.
154. [154] Venkanna, B.K., Venkataramana, R.C., Effect of injector opening pressure on performance, emission and combustion characteristics of DI diesel engine fueled with diesel and honne oil methyl ester. Environ Prog Sustain Energy 32 (2013), 148–155.
155. [155] Bora, D.K., Baruah, D.C., Das, L.M., Babu, M.K.G., Performance of diesel engine using biodiesel obtained from mixed feedstocks. Renew Sustain Energy Rev 16 (2012), 5479–5484.
156. [156] Sahoo, P.K., Das, L.M., Babu, M.K.G., Arora, P., Singh, V.P., Kumar, N.R., Varyani, T.S., Comparative evaluation of performance and emission characteristics of jatropha, karanja and polanga based biodiesel as fuel in a tractor engine. Fuel 88 (2009), 1698–1707.
157. [157] Shaheed A, Swain E Performance and exhaust emission evaluation of a small diesel engine fuelled with coconut oil methyl esters. SAE technical paper; 981156.
158. [158] Dulger Z, Kaplan C. Utilization of sunflower methyl ester as a diesel engine fuel. SAE technical paper, -01-3633; 2001.
159. [159] Huang, J., Wang, Y., Qin, J.-b., Roskilly, A.P., Comparative study of performance and emissions of a diesel engine using Chinese pistache and jatropha biodiesel. Fuel Process Technol 91 (2010), 1761–1767.
160. [160] Sundaresan M, Chandrasekaran, Porai PT. Analysis of combustion, performance and emission characteristics of blends of methyl esters of jatropha oil (MEJ) in DI diesel engine. SAE technical paper, 32-0066; 2007.
161. [161] Ganapathy, T., Gakkhar, R.P., Murugesan, K., Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engine. Appl Energy 88 (2011), 4376–4386.
162. [162] Ozsezen, A.N., Canakci, M., Turkcan, A., Sayin, C., Performance and combustion characteristics of a DI diesel engine fueled with waste palm oil and canola oil methyl esters. Fuel 88 (2009), 629–636.
163. [163] Ozsezen, A.N., Canakci, M., The emission analysis of an IDI diesel engine fueled with methyl ester of waste frying palm oil and its blends. Biomass- Bioenergy 34 (2010), 1870–1878.
164. [164] Ozsezen, A.N., Canakci, M., Determination of performance and combustion characteristics of a diesel engine fueled with canola and waste palm oil methyl esters. Energy Convers Manag 52 (2011), 108–116.
165. [165] Swaminathan, C., Sarangan, J., Performance and exhaust emission characteristics of a CI engine fueled with biodiesel (fish oil) with DEE as additive. Biomass- Bioenergy 39 (2012), 168–174.
166. [166] Ng, J.-H., Ng, H.K., Gan, S., Characterisation of engine-out responses from a light-duty diesel engine fuelled with palm methyl ester (PME). Appl Energy 90 (2012), 58–67.
167. [167] Soma Y, Nakajima M, Yoshida K et al. The application of coconut-oil methyl ester for diesel engine. SAE technical paper; 2007-32-0065.
168. [168] Suryawanshi J Performance and emission characteristics of CI engine fueled by coconut oil methyl ester. SAE technical paper; 2006-32-0077.
169. [169] Sharon, H., Karuppasamy, K., Soban Kumar, D.R., Sundaresan, A., A test on DI diesel engine fueled with methyl esters of used palm oil. Renew Energy 47 (2012), 160–166.
170. [170] Rakopoulos, C.D., Rakopoulos, D.C., Hountalas, D.T., et al. Performance and emissions of bus engine using blends of diesel fuel with bio-diesel of sunflower or cottonseed oils derived from Greek feedstock. Fuel 87 (2008), 147–157.
171. [171] Suryanarayanan S, Janakiraman VM, Sekar J, Rao GLN, Sampath S Determination of the proportion of blend of biodiesel with diesel for optimal engine performance and emission characteristics. SAE technical paper; 2006-01-3534.
172. [172] Fazal, M.A., Haseeb, A.S.M.A., Masjuki, H.H., Investigation of friction and wear characteristics of palm biodiesel. Energy Convers Manag 67 (2013), 251–256.
173. [173] Aydin, H., Bayindir, H., Performance and emission analysis of cottonseed oil methyl ester in a diesel engine. Renew Energy 35 (2010), 588–592.
174. [174] İlkılıç, C., Aydın, H., Determination of performance and exhaust emissions properties of B75 in a CI engine application. Fuel Process Technol 92 (2011), 1790–1795.
175. [175] Karabektas, M., Ergen, G., Hosoz, M., The effects of preheated cottonseed oil methyl ester on the performance and exhaust emissions of a diesel engine. Appl Therm Eng 28 (2008), 2136–2143.
176. [176] Devan, P.K., Mahalakshmi, N.V., Study of the performance, emission and combustion characteristics of a diesel engine using poon oil-based fuels. Fuel Process Technol 90 (2009), 513–519.
177. [177] Srivastava, P.K., Verma, M., Methyl ester of karanja oil as an alternative renewable source energy. Fuel 87 (2008), 1673–1677.
178. [178] Agarwal, A.K., Dhar, A., Gupta, J.G., et al. Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics. Energy Convers Manag 91 (2015), 302–314.
179. [179] Chong, C.T., Ng, J.-H., Ahmad, S., Rajoo, S., Oxygenated palm biodiesel: ignition, combustion and emissions quantification in a light-duty diesel engine. Energy Convers Manag 101 (2015), 317–325.
180. [180] Muralidharan, K., Vasudevan, D., Sheeba, K.N., Performance, emission and combustion characteristics of biodiesel fuelled variable compression ratio engine. Energy 36 (2011), 5385–5393.
181. [181] Puhan, S., Jegan, R., Balasubbramanian, K., Nagarajan, G., Effect of injection pressure on performance, emission and combustion characteristics of high linolenic linseed oil methyl ester in a DI diesel engine. Renew Energy 34 (2009), 1227–1233.
182. [182] Dhar, A., Kevin, R., Agarwal, A.K., Production of biodiesel from high-FFA neem oil and its performance, emission and combustion characterization in a single cylinder DICI engine. Fuel Process Technol 97 (2012), 118–129.
183. [183] Qi, D.H., Geng, L.M., Chen, H., et al. Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil. Renew Energy 34 (2009), 2706–2713.
184. [184] Sayin, C., Gumus, M., Canakci, M., Effect of fuel injection pressure on the injection, combustion and performance characteristics of a DI diesel engine fueled with canola oil methyl esters-diesel fuel blends. Biomass- Bioenergy 46 (2012), 435–446.
185. [185] Mani, M., Nagarajan, G., Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on waste plastic oil. Energy 34 (2009), 1617–1623.
186. [186] Muralidharan, K., Vasudevan, D., Performance, emission and combustion characteristics of a variable compression ratio engine using methyl esters of waste cooking oil and diesel blends. Appl Energy 88 (2011), 3959–3968.
187. [187] Devan, P.K., Mahalakshmi, N.V., A study of the performance, emission and combustion characteristics of a compression ignition engine using methyl ester of paradise oil-eucalyptus oil blends. Appl Energy 86 (2009), 675–680.
188. [188] Jaichandar, S., Senthil Kumar, P., Annamalai, K., Combined effect of injection timing and combustion chamber geometry on the performance of a biodiesel fueled diesel engine. Energy 47 (2012), 388–394.
189. [189] Haik, Y., Selim, M.Y.E., Abdulrehman, T., Combustion of algae oil methyl ester in an indirect injection diesel engine. Energy 36 (2011), 1827–1835.
190. [190] Kivevele, T.T., Kristóf, L., Bereczky, Á., Mbarawa, M.M., Engine performance, exhaust emissions and combustion characteristics of a CI engine fuelled with croton megalocarpus methyl ester with antioxidant. Fuel 90 (2011), 2782–2789.
191. [191] Anand, K., Sharma, R.P., Mehta, P.S., Experimental investigations on combustion, performance and emissions characteristics of neat karanji biodiesel and its methanol blend in a diesel engine. Biomass- Bioenergy 35 (2011), 533–541.