Effect of injector opening pressure on performance, emission and combustion characteristics of di diesel engine fueled with diesel and honne oil methyl ester

Environmental Progress and Sustainable Energy

Volumn 32, Issue 1, 2013, Pages 148-155

  Venkanna, B K ^a   Venkataramana Reddy, C ^b  

^a BASAVESHWAR ENGINEERING COLLEGE   (India)

^b GURU NANAK INSTITUTE OF TECHNOLOGY   (India)

Author keywords

biodiesel; combustion; diesel engine; emission; injector opening pressure

Indexed keywords

COMBUSTION CHARACTERISTICS; COMBUSTION PARAMETERS; DI DIESEL ENGINE; EXHAUST EMISSION; HC EMISSIONS; METHYL ESTERS;

ALTERNATIVE FUELS; BIODIESEL; DIESEL ENGINES; DIESEL FUELS; ESTERIFICATION; ESTERS; JET PUMPS; NEUTRON EMISSION; VEGETABLE OILS;

COMBUSTION;

EID: 84872685832     PISSN: 19447442     EISSN: 19447450     Source Type: Journal    
DOI: 10.1002/ep.10607     Document Type: Article

References (31)

1. Rakopoulos, C.D., Antonopoulos, K.A., Rakopoulos, D.C., Hountalas, D.T., &, Giakoumis, E.G., (2006). Comparative performance and emissions study of a direct injection diesel engine using blends of diesel fuel with vegetable oils or bio-diesel of various origins. Energy Conversion and Management, 47, 3272-3287.
2. Agarwal, A.K., (2007). Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines. Progress in Energy and Combustion Science, 33, 233-271.
3. Murugesan, A., Umarani, C., Subramanian, R., &, Nedunchezhian, N., (2009). Bio-diesel as an alternative fuel for diesel engines-A review. Renewable & Sustainable Energy Reviews, 13, 653-662.
4. Yusuf, H.M.A., (1994). Alternative diesel fuels from vegetable oils. Bioresource Technology, 50, 153-163.
5. Puhan, S., Jeganm, R., Balasubbramanianm, K., &, Nagarajanm, G., (2009). Effect of injection pressure on performance, emission and combustion characteristics of high linolic linseed oil methyl ester in a Di diesel engine. Renewable Energy, 34, 1227-1233.
6. Last, R.J., Krüger, M., &, Dürnholz, M., (1995). Emissions and performance characteristics of a 4-stroke, direct injected diesel engine fueled with blends of biodiesel and low sulfur diesel fuel, SAE Technical Paper No. 950054. Warrendale, PA: 400 Commonwealth Drive.
7. Gumus, M.A., (2010). Comprehensive experimental investigation of combustion and heat release characteristics ofa biodiesel (hazelnut kernel oil methyl ester) fueled direct injection compression ignition engine. Fuel, 89, 2802-2814.
8. Kapilan, N., Ashok Babu, T.P., Janardhan, K., &, Rana Pratap Reddy,. (2009). Effect of injector opening pressure on performance and emission characteristics of mahua oil methyl ester in a Dl diesel engine, SAE Technical Paper No. 2009-01-2901. Rosemont, IL. DOI: 10.4271/2009-01-2901.
9. Nishimura, T., (1998). Effect of fuel injection rate on combustion and emission in a di diesel engine, SAE Technical Paper No. 981929. Warrendale, PA: 400 Commonwealth Drive.
10. Alriksson, M., Gjirja, S., &, Denbratt, I., (2007). The effect of charge air and fuel injection parameters on combustion with high levels of EGR in a HDDI single-cylinder diesel engine, SAE Technical Paper No. 2007-1-914. Detroit, MI. DOI: 10.4271/2007-01-0914.
11. Celikten, I., (2003). An experimental investigation of the effect of the injection pressure on the engine performance and exhaust emission in indirect injection diesel engines. Applied Thermal Engineering, 23, 2051-2060.
12. Cingur, Y., &, Altiparmak, D., (2003). Effect of cetane number and injection pressure on a DI diesel engine performance and emissions. Energy Conversion and Management, 44, 389-397.
13. Hountalas, D.T., Kouremenos, D.A., Binder, K.B., Schwarz, V., &, Mavropoulos, G.C., (2003). Effect of injection pressure on the performance and exhaust emissions of a heavy duty DI diesel engine, SAE Technical Paper No. 2003-01-0340. Warrendale, PA.
14. Venkanna, B.K., &, Venkataramana, R.C., (2010). Effect of injector opening pressures on the performance, emission and combustion characteristics of DI diesel engine running on calophyllum inophyllum linn oil (honne oil)/diesel fuel blend. Thermal Science, 14, 1051-1061.
15. Venkanna, B.K., &, Venkataramana, R.C., (2010). Influence of fuel injection rate on the performance, emission and combustion characteristics of DI diesel engine running on calophyllum inophyllum linn oil (honne oil)/diesel fuel blend, SAE Technical Paper No. 2010-01-1961.
16. Aziz, A.A., Said, M.F., &, Awang, M.A., Performance of palm oil-based biodiesel fuels in a single cylinder direct injection engine. Palm Oil Developments, 42, 15-27.
17. Öner, C., &, Altun, S., (2009). Biodiesel production from inedible animal tallow and an experimental investigation of its use as alternative fuel in a direct injection diesel engine. Applied Energy, 86, 2114-2120.
18. Sahoo, P.K., Das, L.M., Babu, M.K.G., &, Naik, S.N., (2007). Bio-diesel development from high acid value polanga seed oil and performance evaluation in a CI engine. Fuel, 86, 448-454.
19. Puhan, S., Gopinath, A., &, Nagarajan, G., (2009). Combustion, performance and emission characteristics of a DI CI engine using biodiesel with varied fatty acid composition. International Journal of Renewable Energy Technology, 1, 81-100.
20. Kegl, B., &, Pehan, S., (2008). Influence of biodiesel on injection, fuel spray, and engine characteristics. Thermal Science, 12, 171-182.
21. Ozsezen, A.N., Canakci, M., Turkcan, A., &, Sayin, C., (2009). Performance and combustion characteristics of a DI diesel engine fueled with waste palm oil and canola oil methyl esters. Fuel, 88, 629-636.
22. Lapuerta, M., Canoira, L., (2009). Biodiesel from low-grade animal fats: Diesel engine performance and emissions. Energy & Fuels, 23, 121-129.
23. Krishnan, P., &, Nagarajan, G., (2009). Studies on a CI engine using orange skin powder diesel solution with different fuel nozzle opening pressure. Thermal Science, 13, 103-112.
24. Murayama, T., Oh, T., Miyamoto, N., &, Chikahisa, T., (1984). Low carbon flower buildup, low smoke, and efficient diesel operation with vegetable oils by conversion to monoesters and blending with diesel oil or alcohols, SAE Technical Paper No. 841161. DOI: 10.4271/841161.
25. Yamane, K., Uetam, A., &, Shimamoto, Y., (2001). Influence of physical and chemical properties of bio-diesel fuels on injection, combustion and exhaust emission characteristics in a direct injection compression ignition engine. International Journal of Engine Research, 2, 249-261.
26. Graboski, M.S., &, McCormick, R.L., (1998). Combustion of fat and vegetable oil derived fuels in diesel engines. Progress in Energy and Combustion Science, 24, 125-164.
27. Venkanna, B.K., &, Venkataramana, R.C., (2011). DI diesel engine performance, emission and combustion characteristics using diesel fuel, non-edible honne oil methyl ester and blends with diesel fuel. International Journal of Energy Research. DOI: 10.1002/er.1869.
28. Venkanna, B.K., &, Venkataramana, R.C., (2009). Biodiesel production and optimization from calophyllum inophyllum linn oil (honne oil)-A three stage method. Bioresource Technology, 100, 5122-5125.
29. Rente, T., Gjirja, S., &, Denbratt, I., (2004). Experimental investigation of the effect of needle opening pressure (NOP) on combustion and emissions formation in a heavy-duty DI diesel engine, SAE Technical Paper No. 2004-01-2921. Tampa, FL. DOI: 10.4271/2004-01-2921.
30. Gattamaneni, L.N., Saravanan, S., Santhanam, S., &, Kuderu, R., (2008). Combustion and emission characteristics of diesel engine fuelled with rice bran oil methyl ester and its diesel blends. Thermal Science, 12, 139-150.
31. Heywood, J.B., (1988). Internal Combustion Engines, New York: McGraw-Hill.