Impact of palm biodiesel blend on injector deposit formation

Applied Energy

Volumn 111, Issue , 2013, Pages 882-893

  Liaquat, A M ^a   Masjuki, H H ^a   Kalam, M A ^a   Fazal, M A ^a   Khan, Abdul Faheem ^a   Fayaz, H ^a   Varman, M ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

Exhaust emission; Fuel economy; Injector deposit; Lubricating oil; Palm biodiesel; SEM EDS

Indexed keywords

BIODIESEL; CARBON; DIESEL ENGINES; DIESEL FUELS; ENGINE CYLINDERS; ENGINES; FUEL ECONOMY; FUELS; LUBRICATING OILS; SCANNING ELECTRON MICROSCOPY; X RAY SPECTROSCOPY;

BRAKE SPECIFIC FUEL CONSUMPTION; DIESEL INJECTION SYSTEMS; ENERGY DISPERSIVE X RAY SPECTROSCOPY; ENGINE LUBRICATING OIL; EXHAUST EMISSION; EXTENDED OPERATIONS; PALM BIODIESELS; SEM-EDS;

DEPOSITS;

BIOFUEL; CARBON MONOXIDE; CONCENTRATION (COMPOSITION); CYLINDER; ECONOMIC ANALYSIS; EMISSION; EVERGREEN TREE; EXHAUST EMISSION; LUBRICANT; RENEWABLE RESOURCE; TEMPERATURE EFFECT; VEGETABLE OIL; VISCOSITY;

EID: 84880591622     PISSN: 03062619     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apenergy.2013.06.036     Document Type: Article

References (48)

1. Macor A., Avella F., Faedo D. Effects of 30% v/v biodiesel/diesel fuel blend on regulated and unregulated pollutant emissions from diesel engines. Appl Energy 2011, 88:4989-5001.
2. Caprotti R, Bhatti N, Balfour G. Deposit control in modern diesel fuel injection systems. SAE International paper No. 2010-01-2250; 2010.
3. Richards P, Birgel A, Aleiferis P, Ladommatos N, Orlovic A, Lafon V, et al. Deposit formation in the holes of diesel injector nozzles: a critical review. SAE Paper Number: 2008-01-2383; 2008.
4. Sidibé S.S., Blin J., Vaitilingom G., Azoumah Y. Use of crude filtered vegetable oil as a fuel in diesel engines state of the art: literature review. Renew Sust Energy Rev 2010, 14:2748-2759.
5. Lacey P, Gail S, Kientz JM, Milovanovic N, Gris C, Jahirul MI. Internal fuel injector deposits. JSAE 20119075, SAE 2011-01-1925; 2011.
6. Caprotti R, Hatti N, Nobuyuki I. Protecting diesel fuel injection systems. JSAE Paper No. 20119110/SAE Paper No. 2011-01-1927; 2011.
7. Ali Y. Beef tallow as a biodiesel fuel: the graduate college in the University of Nebraska; 1995.
8. Qi D.H., Chen H., Geng L.M., Bian Y.Z., Ren X.C. Performance and combustion characteristics of biodiesel-diesel-methanol blend fuelled engine. Appl Energy 2010, 87:1679-1686.
9. Pehan S., Jerman M.S., Kegl M., Kegl B. Biodiesel influence on tribology characteristics of a diesel engine. Fuel 2009, 88:970-979.
10. Celik I., Aydin O. Effects of B100 biodiesel on injector and pump piston. Tribol T 2011, 54:424-431.
11. Caprotti R, Breakspear A, Klaua T, Weiland P, Graupner O, Bittner M. RME behavior in current and future diesel fuel FIE's. SAE Ppaer No. 2007-01 3982; 2007.
12. Sinha S., Agarwal A.K. Experimental investigation of the effect of biodiesel utilization on lubricating oil degradation and wear of a transportation CIDI engine. J Eng Gas Turb Power 2010, 132:42801-42811.
13. Reksowardojo I.K., Bui H.N., Sok R., Kilgour A.J., Brodjonegoro T.P., Soerawidjaja T.H., et al. The effect of biodiesel fuel rubber (hevea brasiliensis) seed oil on a direct injection (DI) diesel engine. Asean Eng J 2011, 1:65-81.
14. Agarwal A.K. Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines. Prog Energy Combust 2007, 33:233-271.
15. Haseeb A.S.M.A., Fazal M.A., Jahirul M.I., Masjuki H.H. Compatibility of automotive materials in biodiesel: a review. Fuel 2011, 90:922-931.
16. Basinger M., Reding T., Rodriguez-Sanchez F.S., Lackner K.S., Modi V. Durability testing modified compression ignition engines fueled with straight plant oil. Energy 2010, 35:3204-3220.
17. Leung D.Y.C., Wu X., Leung M.K.H. A review on biodiesel production using catalyzed transesterification. Appl Energy 2010, 87:1083-1095.
18. Shu G., Dong L., Liang X. A review of experimental studies on deposits in the combustion chambers of internal combus. Int J Eng Res 2012.
19. Leedham A, Caprotti R, Graupner O, Klaua T. Impact of fuel additives on diesel injector deposits. SAE Paper No. 2004-01-2935; 2004.
20. Yusmady M.A. Diesel and bio-diesel fuel deposits on a hot wall surface: department of mechanical system engineering 2009, GUNMA University, Japan.
21. Zhang W., Yuan W., Zhang X., Coronado M. Predicting the dynamic and kinematic viscosities of biodiesel-diesel blends using mid- and near-infrared spectroscopy. Appl Energy 2012, 98:122-127.
22. Mohamed Arifin Y., Furuhata T., Saito M., Arai M. Diesel and bio-diesel fuel deposits on a hot surface. JSAE Trans 2008, 39(3):207-213.
23. Guan L., Feng X.L., Xiong G., Xie J.A. Application of dielectric spectroscopy for engine lubricating oil degradation monitoring. Sensor Actuat A: Phys 2011, 168:22-29.
24. Kalam M.A., Masjuki H.H., Varman V., Liaquat A.M. Friction and wear characteristics of waste vegetable oil contaminated lubricants. Int J Mech Mat Eng (IJMME) 2011, 6:431-436.
25. Maleque M.A., Masjuki H.H., Haseeb A.S.M.A. Effect of mechanical factors on tribological properties of palm oil methyl ester blended lubricant. Wear 2000, 239:117-125.
26. Wander P.R., Altafini C.R., Colombo A.L., Perera S.C. Durability studies of mono-cylinder compression ignition engines operating with diesel, soy and castor oil methyl esters. Energy 2011, 36:3917-3923.
27. Pandey R.K., Rehman A., Sarviya R.M. Impact of alternative fuel properties on fuel spray behavior and atomization. Renew Sust Energy Rev 2012, 16:1762-1778.
28. Thornton MJ, Alleman TL, Luecke J, McCormick RL. Impacts of biodiesel fuel blends oil dilution on light-duty diesel engine operation. SAE paper no. 2009-01-1790; 2009.
29. Agarwal A.K., Dhar A. Karanja oil utilization in a direct-injection engine by preheating. Part 2: Experimental investigations of engine durability and lubricating oil properties. Proc Inst Mech Eng, Part D: J Automob Eng 2010, 224:85-97.
30. Pandey AK, Nandgaonkar MR. Experimental investigation of the effect of esterified karanja oil biodiesel on performance, emission and engine wear of a military heavy duty, 118 kW, turbocharged CIDI engine. JSAE 20119011, SAE 2011-01-1945; 2011.
31. Kalam M.A., Majsuki H.H. Use of an additive in biofuel to evaluate emissions, engine component wear and lubrication characteristics. Proc Inst Mech Eng, Part D: J Automob Eng 2002, 216:751-757.
32. Sapienza R.S., Butcher T., Krushna C.R., Gaffney J. In chemistry of engine combustion deposits 1985, Plenum Press, New York.
33. Huang J., Wang Y., Qin J.-B., Roskilly A.P. Comparative study of performance and emissions of a diesel engine using Chinese pistache and jatropha biodiesel. Fuel Process Technol 2010, 91:1761-1767.
34. Dhar A., Kevin R., Agarwal A.K. Production of biodiesel from high-FFA neem oil and its performance, emission and combustion characterization in a single cylinder DICI engine. Fuel Process Technol 2012, 97:118-129.
35. An H., Yang W.M., Chou S.K., Chua K.J. Combustion and emissions characteristics of diesel engine fueled by biodiesel at partial load conditions. Appl Energy 2012, 99:363-371.
36. Çelikten I., Mutlu E., Solmaz H. Variation of performance and emission characteristics of a diesel engine fueled with diesel, rapeseed oil and hazelnut oil methyl ester blends. Renew Energy 2012, 48:122-126.
37. Shivakumar, Srinivasa Pai P., Shrinivasa Rao B.R. Artificial neural network based prediction of performance and emission characteristics of a variable compression ratio CI engine using WCO as a biodiesel at different injection timings. Appl Energy 2011, 88:2344-2354.
38. Gumus, Sayin C., Canakci M. The impact of fuel injection pressure on the exhaust emissions of a direct injection diesel engine fueled with biodiesel-diesel fuel blends. Fuel 2012, 95:486-494.
39. Monyem A., Van Gerpen J.H., Canakci M. The effect of timing and oxidation on emissions from biodiesel-fueled engines. Trans ASAE 2001, 44:35-42.
40. Abd-Alla G.H., Soliman H.A., Badr O.A., Abd-Rabbo M.F. Effects of diluent admissions and intake air temperature in exhaust gas recirculation on the emissions of an indirect injection dual fuel engine. Energy Convers Manage 2001, 42:1033-1045.
41. Rao P.V. Experimental investigations on the influence of properties of jatropha biodiesel on performance, combustion, and emission characteristics of a DI-CI engine. World Acad Sci, Eng Technol 2011, 75:855-868.
42. Gumus M., Kasifoglu S. Performance and emission evaluation of a compression ignition engine using a biodiesel (apricot seed kernel oil methyl ester) and its blends with diesel fuel. Biomass Bioenergy 2010, 34:134-139.
43. Ganapathy T., Gakkhar R.P., Murugesan K. Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engine. Appl Energy 2011, 88:4376-4386.
44. Rizwanul Fattah I.M., Masjuki H.H., Liaquat A.M., Ramli R., Kalam M.A., Riazuddin V.N. Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions. Renew Sust Energy Rev 2013, 18:552-567.
45. Özener O., Yüksek L., Ergenç A.T., Özkan M. Effects of soybean biodiesel on a DI diesel engine performance, emission and combustion characteristics. Fuel 2013, (in press).
46. Liaquat A.M., Masjuki H.H., Kalam M.A., Varman M., Hazrat M.A., Shahabuddin M., et al. Application of blend fuels in a diesel engine. Energy Proc 2012, 14:1124-1133.
47. Ndayishimiye P., Tazerout M. Use of palm oil-based biofuel in the internal combustion engines: performance and emissions characteristics. Energy 2011, 36:1790-1796.
48. Hirkude J.B., Padalkar A.S. Performance and emission analysis of a compression ignition: engine operated on waste fried oil methyl esters. Appl Energy 2012, 90:68-72.