Mechanical properties of human mineralized connective tissues

Modeling and Simulation in Science, Engineering and Technology

Volumn , Issue 9780817644109, 2007, Pages 211-261

  De Santis, R ^a   Ambrosio, L ^a   Mollica, F ^b   Netti, P ^c   Nicolais, L ^c  

^a CNR   (Italy)

^b UNIVERSITY OF FERRARA   (Italy)

^c UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84986915273     PISSN: 21643679     EISSN: 21643725     Source Type: Book Series    
DOI: 10.1007/978-0-8176-4411-6_6     Document Type: Chapter

References (180)

1. Akkus, O., Jepsen, K.J., and Rimnac, C.M., Microstructural aspects of the fracture process in human cortical bone, J. Mat. Sci., 35 (2000), 6065–6074.
2. Apicella, A., Liguori, A., Masi, E., and Nicolais, L., Thick laminate composite modeling in total hip replacement, in Experimental Techniques and Design in Composite Materials Sheffield Academis Press, (1994), pp. 323–338.
3. Ascenzi, A., Baschieri, P., and Bonucci, E., The bending properties of single osteons. J. Biomech., 23 (1990), 763–771.
4. Ascenzi, A. and Bonucci, E., The compressive properties of single osteons. Anatom. Rec., 161 (1968), 377–391.
5. Ascenzi, A. and Bonucci, E., The tensile properties of single osteons. Anatom. Rec., 158 (1967), 375–386.
6. Ascenzi, A., Benvenuti, A., Bigi, A., Foresti, E., Koch, M.H., Mango, F., Ripamonti, A., and Roveri, N., X-ray diffraction on Cyclically loaded osteons. Calcif. Tissue Int., 62 (1998), 266–273.
7. Ashman, R.B., Cowin, S.C., Van Buskirk, W.C., and Rice, J.C., A continuous wave technique for the measurement of the elastic properties of cortical bone. J. Biomech., 17 (1984), 349–61.
8. Augat, P., Link, T., Lang, T.F., Lin, J.C., Majumdar, S., and Genant, H.K., Anisotropy of the elastic modulus of trabecular bone specimens from different anatomical locations. Med. Eng. Phys., 2 (1998), 124–31.
9. Balooch, M., Wu-Magidi, I.C., Balazs, A., Lundkvist, A.S., Marshall, S.J., Marshall, G.W., Siekhaus, W.J., and Kinney, J.H., Viscoelastic properties of demineralized human dentin measured in water with atomic force microscope (AFM)-based indentation. J. Biomed. Mater. Res., 15 (1998), 539–44.
10. Balooch, G., Marshall, G.W., Marshall, S.J., Warren, O.L., Asif, S.A., and Balooch, M., Evaluation of a new modulus mapping technique to investigate microstructural features of human teeth. J. Biomech., 37 (2004), 1223–32.
11. Bargren, J.H., Andrew, C., Bassett, L., and Gjelsvik, A., Mechanical properties of hydrated cortical bone. J. Biomech., 7 (1974), 239–45.
12. Bayraktar, H.H. and Keaveny, T.M., Mechanisms of uniformity of yield strains for trabecular bone. J. Biomech., 37 (2004), 1671–8.
13. Behiri, J.C. and Bonfield, W., Fracture mechanics of bone—the effects of density, specimen thickness and crack velocity on longitudinal fracture. J. Biomech., 17 (1984), 25–34.
14. Bonfield, W. and Datta, P.K., Fracture toughness of compact bone. J. Biomech., 9 (1976), 131–4.
15. Bonfield, W. and Grynpas, M.D., Anisotropy of the Young’s modulus of bone. Nature, 270 (1977), 453–4.
16. Boskey, A., Bone mineral crystal size. Osteoporos. Int., 14 (2003), 16–21.
17. Boyde, A. and Jones, S.J., Scanning electron microscopy of bone: Instrument, specimen, and issues. Microscopy Res. Tech., 33 (1998), 92–120.
18. Bowen, R.L. and Rodriguez, M.S., Tensile strength and modulus of elasticity of tooth structure and several restorative materials. J. Am. Dent. Assoc., 64 (1962), 378–87.
19. Bromage, T.G., Goldman, H.M., McFarlin, S.C., Warshaw, J., Boyde, A., and Riggs, C.M., Circularly polarized light standards for investigations of collagen fiber orientation in bone. Anat. Rec. B. New Anat., 274 (2003), 157–68.
20. Brown, S.J., Pollintine, P., Powell, D.E., Davie, M.W.J., and Sharp, C.A., Regional differences in mechanical and material properties of femoral head cancellous bone in health and osteoarthritis. Calcif. Tissue Int., 71 (2002), 227–234.
21. Bumrerraj, S. and Katz, J.L., Scanning acoustic microscopy study of human cortical and trabecular bone. Ann. Biomed. Eng., 29 (2001), 1034–42.
22. Burr, D.B., Schaffler, M.B., and Frederickson, R.G., Composition of the cement line and its possible mechanical role as a local interface in human compact bone. J. Biomech., 21 (1988) 939–45.
23. Cagidiaco, M.C. and Ferrari, M., Organization of the matrix. In: Bonding to dentin. Livorno: O. Debatte and F. Ed. (1995), 11–26.
24. Carter, D.R. and Hayes, W.C., The compressive behavior of bone as two-phase porous structure. J. Bone Joint Surg., 59 (1977), 954–962.
25. Carter, D.R. and Caler, W.E., Cycle-dependent and time-dependent bone fracture with repeated loading. J. Biomech. Eng., 105 (1983), 166–70.
26. Cassidy, J.J., Hiltner, A., and Baer, E., Hierarchical structure of the intervertebral disc. Connect Tissue Res., 1 (1989), 75–88.
27. Causa, F., Manto, L., Borzacchiello, A., De Santis, R., Netti, P.A., Ambrosio, L., and Nicolais, L., Spatial and structural dependence of mechanical properties of porcine intervertebral disc. J. Mater. Sci. Mater. Med., 12 (2002), 1277–80.
28. Charras, G.T., Lehenkari, P.P., and Horton, M.A., Atomic force microscopy can be used to mechanically stimulate osteoblasts and evaluate cellular strain distributions. Ultramicroscopy., 86 (2001), 85–95.
29. Choi, K., Kuhn, J.L., Ciarelli, M.J., and Goldstein, S.A., The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus. J. Biomech., 11 (1990), 1103–1113.
30. Choi, K. and Goldstein, S.A., A comparison of the fatigue behavior of human trabecular and cortical bone tissue. J. Biomech., 25 (1992), 1371–81.
31. Ciarelli, T.E., Fyhrie, D.P., Schaffler, M.B., and Goldstein, S.A., Variations in three-dimensional cancellous bone architecture of the proximal femur in female hip fractures and in controls. J. Bone Miner. Res., 15 (2000), 32–40.
32. Claes, L.E., Wilke, H.J., and Kiefer, H., Osteonal structure better predicts tensile strength of healing bone than volume fraction. J. Biomech., 28 (1995), 1377–90.
33. Courtney, A.C., Hayes, W.C., and Gibson, L.J., Age-related differences in post-yield damage in human cortical bone. Experiment and model. J. Biomech., 29 (1996), 1463–71.
34. Cowin, S.C. and Turner, C.H., On the relationship between the orthotropic Young’s moduli and fabric. J. Biomech., 25 (1992), 1493–1494.
35. Cowin, S.C., Bone poroelasticity. J. Biomech., 32 (1999), 217–38.
36. Cowin, S.C., The relationship between the elasticity tensor and the fabric tensor. Mech. Mater., 4 (1985), 134–147.
37. Cowin, S.C., Wolff’s law of trabecular architecture at remodeling equilibrium. J. Biomech. Eng., 1 (1986), 83–8.
38. Craig, R.G. and Peyton, F.A., Elastic and mechanical properties of human dentin. J. Dent. Res., 37 (1958), 710–8.
39. Craig, R.G. and Peyton, F.A., Thermal conductivity of teeth structures, dentin cements, and amalgam. J. Dent. Res. 40 (1961), 411–418.
40. Cuppone, M., Seedhom, B.B., Berry, E., Ostell, A.E., The longitudinal Young’s modulus of cortical bone in the midshaft of human femur and its correlation with CT scanning data. Calcif. Tissue Int., 74 (2004), 302–9.
41. Currey, J.D., Stress concentrations in bone. Q J. Microsc. Sci., 103 (1962), 111–133.
42. Currey, J., Sacrificial bonds heal bone. Nature, 414 (2001), 699.
43. Currey, J.D. and Butler, G., The mechanical properties of bone tissue in children. J. Bone Joint Surg. Am., 57 (1975), 810–4.
44. Dabestani, M. and Bonfield, W., Elastic and anelastic microstrain measurement in human cortical bone. In: Implant Materials in Biofunction. de Putter, C., de Lange, G.L., de Groot, K., Lee, A.J.C. Eds. Elsevier Science, Amsterdam (1988), 435–440.
45. De Santis, R., Mollica, F., Prisco, D., Rengo, S., Ambrosio, L., and Nicolais, L., A 3-D analysis of mechanically stressed dentinadhesive- composite interfaces using X-ray micro-CT. Biomaterials, 26 (2005), 257–270.
46. De Santis, R., Anderson, P., Tanner, K.E., Ambrosio, L., Nicolais L., Bonfield, W., and Davis, G.R., Bone fracture analysis on the short rod chevron-notch specimens using the X-ray computer micro-tomography. J. Mat. Sci. Mat. Med., 11 (2000), 629–636.
47. Deligiann, D.D., Missirlis, Y.F., Tanner, K.E., and Bonfield, W., Mechanical behavior of trabecular bone of the human femoral head in females. J. Mater. Sci. Mat. Med., 2 (1991), 168–175.
48. Deligiann, D.D., Maris, A., and Missirlis, Y.F., Stress relaxation behavior of trabecular bone specimens. J. Biomech., 27 (1994), 1469–1476.
49. Ding, M., Dalstra, M., Danielsen, C.C., Kabel, J., Hvid, I., and Linde, F., Age variations in the properties of human tibial trabecular bone. J. Bone Joint Surg. Br., 6 (1997), 995–1002.
50. Dowling, N.E., Mechanical Behavior of Materials. Prentice- Hall, Englewood Cliffs, NJ (1996).
51. Duncanson, M.G., Jr. Korostoff, E., Compressive viscoelastic properties of human dentin: I. Stress-relaxation behavior. J. Dent. Res., 54 (1975), 1207–12.
52. El Mowafy, O.M. and Watts, D.C., Fracture toughness of human dentin. J. Dent. Res., 65 (1986), 677–81.
53. Erdemt, U., Instrument science and technology: Force and weight measurement, J. Phys E: Sci. Instrum., 15 (1982), 857–872.
54. Evans, F.G. and Vincentelli, R., Relation of collagen fibers orientation to some mechanical properties of human cortical bone. J. Biomech., 2 (1969), 63–71.
55. Fan, Z. and Rho, J.Y., Effects of viscoelasticity and time-dependent plasticity on nanoindentation measurements of human cortical bone. J. Biomed. Mater. Res. A, 67 (2003), 208–14.
56. Fantner, G.E., Hassenkam, T., Kindt, J.H., Weaver, J.C., Birkedal, H., Pechenik, L., Cutroni, J.A., Cidade, G.A.G., Stucky, G.D., Morse, D.E., and Hansma, P.K., Sacrificial bonds and hidden length dissipate energy as mineralized fibrils separate during bone fracture. Nature, 4 (2005), 612–616.
57. Fong, H., Sarikaya, M., White, S.N., and Snead, M.L., Nanomechanical properties profiles across dentin-enamel junction of human incisor teeth. Mater. Sci. Eng. C, 7 (2000), 119–128.
58. Forss, H., Seppa, L., and Lappalainen, R., In vitro abrasion resistance and hardness of glass-ionomer cements. Dent. Mater., 7 (1991), 36–9.
59. Galante, J., Rostoker, W., and Ray, R.D., Physical properties of trabecular bone. Calcif Tissue Res., 5 (1970), 236–46.
60. Garberoglio, R. and Brannstrom, M., Scanning electron microscopic investigation of human dentinal tubules. Arch. Oral Biol., 21 (1976), 355–62.
61. Giesen, E.B., Ding, M., and Dalstra, M., and van Eijden, T.M., Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic. J. Biomech., 34 (2001), 799–803.
62. Gilmore, R.S. and Katz, J.L., Elastic properties of apatites, J. Mat. Sci., 17 (1982), 1131–1141.
63. Goldstein, S.A., Wilson, D.L., Sonstegard, D.A., and Matthews, L.S., The mechanical properties of human tibial trabecular bone as a function of metaphyseal location. J. Biomech., 12 (1983), 965–969.
64. Guo, X.E., Liang, L.C., and Goldstein, S.A., Micromechanics of osteonal cortical bone fracture. J. Biomech. Eng., 120 (1998), 112–7.
65. Habelitz, S., Marshall, G.W., Jr., Balooch, M., and Marshall, S.J., Nanoindentation and storage of teeth. J. Biomech., 35 (2002), 995–8.
66. Habelitz, S., Marshall, S.J., Marshall, G.W., Jr., and Balooch, M., Mechanical properties of human dental enamel on the nanometre scale. Arch. Oral Biol., 46 (2001), 173–83.
67. Hara, T., Takizawa, M., Sato, T., and Ide, Y., Mechanical properties of buccal compact bone of the mandibular ramus in human adults and children: Relationship of the elastic modulus to the direction of the osteon and the porosity rati. Bull. Tokyo Dent. Coll., 39 (1998), 47–55.
68. Hassan, R., Caputo, A.A., and Bunshah, R.F., Fracture toughness of human enamel. J. Dent. Res., 60 (1981), 820–7.
69. Hengsberger, S., Kulik, A., and Zysset, P., Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions. Bone, 30 (2002), 178–84.
70. Hogan, H.A., Micromechanics modeling of Haversian cortical bone properties. J. Biomech., 25 (1992), 549–56.
71. Homminga, J., McCreadie, B.R., Ciarelli, T.E., Weinans, H., Goldstein, S.A., and Huiskes, R., Cancellous bone mechanical properties from normals and patients with hip fractures differ on the structure level, not on the bone hard tissue level. Bone, 30 (2002), 759–64.
72. Hvid, I. and Hansen, S.L., Trabecular bone strength patterns at the proximal tibial epiphysis. J. Orthop. Res., 4 (1985), 464–472.
73. Huiskes, R., Ruimerman, R., van Lenthe, G.H., and Janssen, J.D., Effects of mechanical forces on maintenance and adaptation of form in trabecular bone. Nature, 405 (2000), 704–706.
74. Imbeni, V., Nalla, R.K., Bosi, C., Kinney, J.H., and Ritchie, R.O., In vitro fracture toughness of human dentin. J. Biomed. Mater. Res. A, 66 (2003), 1–9.
75. Ito, S., Saito, T., Tay, F.R., Carvalho, R.M., Yoshiyama, M., and Pashley, D.H., Water content and apparent stiffness of non-caries versus caries-affected human dentin. J. Biomed. Mater. Res. B Appl. Biomater., 72 (2005), 109–16.
76. Iwamoto, N. and Ruse, N.D., Fracture toughness of human dentin. J. Biomed. Mater. Res. A, 66 (2003), 507–12.
77. Jantarat, J., Palamara, J.E., Lindner, C., and Messer, H.H., Timedependent properties of human root dentin. Dent. Mater., 18 (2002), 486–93.
78. Jasiuk, I. and Ostoja-Starzewski, M., Modeling of bone at a single lamella level. Biomech. Model Mechanobiol., 3 (2004), 67–74.
79. Jepsen, K.J. and Davy, D.T., Comparison of damage accumulation measures in human cortical bone. J. Biomech., 30 (1997), 891–4.
80. Kabel, J., van Rietbergen, B., Odgaard, A., and Huiskes, R., Constitutive relationships of fabric, density, and elastic properties in cancellous bone architecture. Bone, 25 (1999), 481–486.
81. Kafka, V. and Jirova, J., A structural mathematical model for the viscoelastic anisotropic behavior of trabecular bone. Biorheology, 20 (1983), 795–805.
82. Katz, J.L. and Meunier, A., Material properties of single osteons and osteonic lamellae using high frequency scanning acoustic microscopy. In: Bone Structure and Remodeling. Odgaard, A., Weinas, H., Eds. Word Scientific, Amsterdam (1994), 157–165.
83. Katz, J.L., Anisotropy of Young’s modulus of bone. Nature, 283 (1980), 106–7.
84. Keaveny, T.M. and Hayes, W.C., A 20-year perspective on the mechanical properties of trabecular bone. J. Biomech. Eng. 115 (1993), 534–42.
85. Keaveny, T.M., Morgan, E.F., Niebur, G.L., and Yeh, O.C., Biomechanics of trabecular bone. Annu. Rev. Biomed. Eng., 3 (2001), 307–333.
86. Kinney, J.H., Balooch, M., Marshall, S.J., Marshall, G.W., Jr., Weihs, T.P., Hardness and Young’s modulus of human peritubular and intertubular dentine. Arch. Oral Biol., 41 (1996), 9–13.
87. Kinney, J.H., Balooch, M., Marshall, S.J., Marshall, G.W., Jr., and Weihs, T.P., Atomic force microscope measurements of the hardness and elasticity of peritubular and intertubular human dentin. J. Biomech. Eng., 118 (1996), 133–5.
88. Kinney, J.H., Balooch, M., Marshall, G.W., and Marshall, S.J., A micromechanics model of the elastic properties of human dentine. Arch. Oral Biol., 44 (1999), 813–22.
89. Kinney, J.H., Marshall, S.J., and Marshall, G.W., The mechanical properties of human dentin: A critical review and re-evaluation of the dental literature. Crit. Rev. Oral Biol. Med., 14 (2003), 13–29.
90. Kinney, J.H., Gladden, J.R., Marshall, G.W., Marshall, S.J., So, J.H., and Maynard, J.D., Resonant ultrasound spectroscopy measurements of the elastic constants of human dentin. J. Biomech., 37 (2004), 437–41.
91. Kishen, A., Ramamurty, U., and Asundi, A., Experimental studies on the nature of property gradients in the human dentine. J. Biomed. Mater. Res., 51 (2000), 650–9.
92. Konishi, N., Watanabe, L.G., Hilton, J.F., Marshall, G.W., Marshall, S.J., and Staninec, M., Dentin shear strength: Effect of distance from the pulp. Dent. Mater., 18 (2002), 516–20.
93. Kopperdahl, D.L. and Keaveny, T.M., Yield strain behavior of trabecular bone. J. Biomech., 31 (1998), 601–608.
94. Kuboky, Y. and Mechanic, G.L., Comparative molecular distribution of cross-link in bone and dentine collagen. Structure-function relationship. Calcif. Tissue Int., 34 (1982), 306–308.
95. Lakes, R.S., Nakamura, S., Behiri, J.C., and Bonfield, W., Fracture mechanics of bone with short cracks. J. Biomech., 23 (1990), 967–75.
96. Lang, H.P., Hegner, M., and Gerber, C., Cantilever array sensors. Mater. Today, 8 (2005), 30–36.
97. Lenz, C. and Nackenhorst, U., A numerical approach to mechanosensation of bone tissue based on a micromechanical analysis of a single osteon. PAMM, 4 (2004), 342–343.
98. Lertchirakarn, V., Palamara, J.E., and Messer, H.H., Anisotropy of tensile strength of root dentin. J. Dent. Res., 80 (2001), 453–6.
99. Liebschner, M.A. and Keller, T.S., Hydraulic strengthening affects the stiffness and strength of cortical bone. Ann. Biomed. Eng. 33 (2005), 26–38.
100. Linde, F., Norgaard, P., Hvid, I., Odgaard, A., and Soballe, K., Mechanical properties of trabecular bone. Dependency on strain rate. J. Biomech., 24 (1991), 803–809.
101. Linde, F. and Sorensen, H.C., The effect of different storage methods on the mechanical properties of trabecular bone. J. Biomech., 26 (1993), 1249–52.
102. Majumdar, S., Kothari, M., Augat, P., Newitt, D.C., Link, T.M., Lin, J.C., Lang, T., Lu, Y., and Genant, H.K., High-resolution magnetic resonance imaging: Three-dimensional trabecular bone architecture and biomechanical properties. Bone, 22 (1998), 445–54.
103. Marshall, G.W., Jr., Balooch, M., Gallagher, R.R., Gansky, S.A., and Marshall, S.J., Mechanical properties of the dentinoenamel junction: AFM studies of nanohardness, elastic modulus, and fracture. J. Biomed. Mater. Res., 54 (2001), 87–95.
104. Marshall, S.J., Balooch, M., Habelitz, S., Balooch, G., Gallagher, R., and Marshall, G.W., The dentin-enamel junction-a natural, multilevel interface. J. Europ. Ceramic Soc., 23 (2003), 2897–2904
105. Martin, R.B. and Burr, D.B., A hypothetical mechanism for the stimulation of osteonal remodeling by fatigue damage. J. Biomech., 15 (1982), 137–9.
106. Martin, B., Aging and strength of bone as a structural material. Calcif. Tissue Int., 53 Suppl 1 (1993), S34–39.
107. McElhaney, J.H., Dynamic response of bone and muscle tissue. J. Appl. Physiol., 21 (1966), 1231–36.
108. Mente, P.L. and Lewis, J.L., Experimental method for the measurement of the elastic modulus of trabecular bone tissue. J. Orthop. Res., 7 (1989), 456–61.
109. Meredith, N., Sherriff, M., Setchell, D.J., and Swanson, S.A., Measurement of the microhardness and Young’s modulus of human enamel and dentine using an indentation technique. Arch. Oral Biol. 41 (1996), 539–45.
110. Miguez, P.A., Pereira, P.N., Atsawasuwan, P., and Yamauchi, M., Collagen cross-linking and ultimate tensile strength in dentin. J. Dent Res., 83 (2004), 807–10.
111. Misch, C.E., Qu, Z., and Bidez, M.W., Mechanical properties of trabecular bone in the human mandible: implications for dental implant treatment planning and surgical placements. J. Oral Maxillofac. Surg., 57 (1999), 700–706.
112. Morgan, E.F. and Keaveny, T.M., Dependence of yield strain of human trabecular bone on anatomic site. J. Biomech., 5 (2001), 569–77.
113. Mosekilde, L., Mosekilde, L., and Danielsen, C.C., Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals. Bone, 2 (1987), 79–85.
114. Nalla, R.K., Kinney, J.H., and Ritchie, R.O., On the fracture of human dentin: Is it stress- or strain-controlled? J. Biomed. Mater. Res.A, 67 (2003), 484–95.
115. Nalla, R.K., Imbeni, V., Kinney, J.H., Staninec, M., Marshall, S.J., and Ritchie, R.O., In vitro fatigue behavior of human dentin with implications for life prediction. J. Biomed. Mater. Res.A 66 (2003), 10–20.
116. Nalla, R.K., Kinney, J.H., Marshall, S.J., and Ritchie, R.O., On the in vitro fatigue behavior of human dentin: Effect of mean stress. J. Dent. Res., 83 (2004), 211–5.
117. Natali, A.N., and Hart, R.T., Mechanics of hard tissues, in Integrated Biomaterials Science, R. Barbucci, Ed. Kluwer Academic and Plenum, New York (2002) 459–489.
118. Nicholson, P.H., Muller, R., Lowet, G., Cheng, X.G., Hildebrand, T., Ruegsegger, P., van der Perre, G., Dequeker, J., and Boonen, S., Do quantitative ultrasound measurements reflect structure independently of density in human vertebral cancellous bone? Bone, 23 (1998), 425–31.
119. Nicholson, P.H.F., Cheng, X.G., Lowet, G., Boonen, S., Davie, M.W.J., Dequeker, J., and Van der Perre, G., Structural and material mechanical properties of human vertebral cancellous bone. Med. Eng. Phys., 19 (1997), 729–737.
120. Nicolais, L., Mechanics of composites (particulate and fiber polymeric laminate properties). Polym. Eng. Sci., 15 (1975), 137–149.
121. Norman, T.L., Vashishth, D., and Burr, D.B., Mode I fracture toughness of human bone. In: Advances in Bioengineering, Vanderby, R., Ed. ASME, New York (1991), pp. 361–364.
122. Norman, T.L., Vashishth, D., and Burr, D.B., Fracture toughness of human bone under tension. J. Biomech., 28 (1995), 309–20.
123. Norman, T.L., Nivargikar, S.V., and Burr, D.B., Resistance to crack growth in human cortical bone is greater in shear than in tension. J. Biomech., 29 (1996), 1023–31.
124. Norman, T.L. and Wang, Z., Microdamage of human cortical bone: Incidence and morphology in long bones. Bone, 20 (1997), 375–9.
125. Okazaki, K., Nishimura, F., and Nomoto, S., Fracture toughness of human enamel. Shika Zairyo Kikai, 8 (1989), 382–7.
126. O’Mahony, A.M., Williams, J.L., Katz, J.O., and Spencer, P., Anisotropic elastic properties of cancellous bone from human edentulous mandible. Clin. Oral Impl. Res., 11 (2000), 415–421.
127. Ouyang, J., Yang, G.T., Wu, W.Z., Zhu, Q.A., and Zhong, S.Z., Biomechanical characteristics of human trabecular bone. Clin. Biomech. 12 (1997), 522–524.
128. Pashley, D.H., Agee, K.A., Wataha, J.C., Rueggeberg, F., Ceballos, L., Itou, K., Yoshiyama, M., Carvalho, R.M., and Tay, F.R., Viscoelastic properties of demineralized dentin matrix. Dent. Mater., 19 (2003), 700–6.
129. Rasmussen, S.T., Patchin, R.E., Scott, D.B., and Heuer, A.H., Fracture properties of human enamel and dentin. J. Dent. Res., 55 (1976), 154–64.
130. Raum, K., Jenderka, K.V., Klemenz, A., and Brandt, J., Multilayer analysis: Quantitative scanning acoustic microscopy for tissue characterization at a microscopic scale. IEEE Trans. Ultras Ferroelectr. Freq. Contr., 50 (2003), 507–516.
131. Reilly, D.T., Burstein, A.H., and Frankel, V.H., The elastic modulus for bone. J. Biomech., 7 (1974), 271–5.
132. Reilly, D.T. and Burstein, A.H., The elastic and ultimate properties of compact bone tissue. J. Biomech., 8 (1975), 393–405.
133. Renson, C.E. and Braden, M., Experimental determination of the rigidity modulus, Poisson’s ratio and elastic limit in shear of human dentine. Arch. Oral Biol., 20 (1975), 43–7.
134. Rho, J.Y., Ashman, R.B., and Turner, C.H., Young’s modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements. J. Biomech., 2 (1993), 111–119.
135. Rho, J.Y., Kuhn-Spearing, L., and Zioupos, P., Mechanical properties and the hierarchical structure of bone. Med. Eng. Phys., 2 (1998), 92–102.
136. Rho, J.Y., Roy, M.E., 2nd, Tsui, T.Y., and Pharr, G.M., Elastic properties of microstructural components of human bone tissue as measured by nanoindentation. J. Biomed. Mater. Res., 45 (1999), 48–54.
137. Rho, J.Y., An ultrasonic method for measuring the elastic properties of human tibial cortical and cancellous bone. Ultrasonics, 8 (1996), 777–783.
138. Rohl, L., Larsen, E., Linde, F., Odgaard, A., and Jorgensen, J., Tensile and compressive properties of cancellous bone. J. Biomech. 12 (1991), 1143–9.
139. Roy, M.E., Rho, J.Y., Tsui, T.Y., Evans, N.D., and Pharr, G.M., Mechanical and morphological variation of the human lumbar vertebral cortical and trabecular bone. J. Biomed. Mater. Res., 44 (1999), 191–7.
140. Runkle, J.C. and Pugh, J., The micro-mechanics of cancellous bone. II. Determination of the elastic modulus of individual trabeculae by a buckling analysis. Bull. Hosp. Joint Dis., 36 (1975), 2–10.
141. Sano, H., Shono, T., Sonoda, H., Takatsu, T., Ciucchi, B., Carvalho, R., and Pashley, D.H., Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test. Dent. Mater, 10 (1994), 236–40.
142. Sano, H., Ciucchi, B., Matthews, W.G., and Pashley, D.H., Tensile properties of mineralized and demineralized human and bovine dentin. J. Dent. Res., 73 (1994), 1205–11.
143. Schaffler, M.B., Choi, K., and Milgrom, C., Aging and matrix microdamage accumulation in human compact bone. Bone, 17 (1995), 521–25.
144. Schoenfeld, C.M., Lautenschlager, E.P., and Meyer, P.R., Mechanical properties of human cancellous bone in the femoral head. Med. Biol. Engng., 12 (1974), 313–317.
145. Schwartz-Dabney, C.L., Dechow, P.C., Schwartz-Dabney, C.L., and Dechow, P.C., Variations in cortical material properties throughout the human dentate mandible. Am. J. Phys. Anthropol., 120 (2003), 252–77.
146. Sevostianov, I. and Kachanov, M., Impact of the porous microstructure on the overall elastic properties of the osteonal cortical bone. J. Biomech., 33 (2000), 881–8.
147. Silver, F.H., Seehra, G.P., Freeman, J.W., and DeVore, D., Viscoelastic properties of young and old human dermis: A proposed molecular mechanism for elastic energy storage in collagen and elastin. J. Appl. Pol. Sci., 79 (2001), 134–142.
148. Simkin, A. and Robin, G., Fracture formation in differing collagen fiber pattern of compact bone. J. Biomech., 7 (1974), 183–8.
149. Skovoroda, A.R., Emelianov, S.Y., and O’Donnell, M., Tissue elasticity reconstruction based on ultrasonic displacement and strain images, IEEE Trans. Ultrason. Ferroelectr. Freq. Contr., 42 (1995), 747–745.
150. Staninec, M., Marshall, G.W., Hilton, J.F., Pashley, D.H., Gansky, S.A., Marshall, S.J., and Kinney, J.H., Ultimate tensile strength of dentin: Evidence for a damage mechanics approach to dentin failure. J. Biomed. Mater. Res., 63 (2002), 342–5.
151. Tam, L.E. and Yim, D., Effect of dentine depth on the fracture toughness of dentine-composite adhesive interfaces. J. Dent., 25 (1997), 339–46.
152. Tesch, W., Eidelman, N., Roschger, P., Goldenberg, F., Klaushofer, K., and Fratzl, P., Graded microstructure and mechanical properties of human crown dentin. Calcif Tissue Int., 69 (2001), 147–57.
153. Thompson, J.B., Kindt, J.H., Drake, B., Hansma, H.G., Morse, D.E., and Hansma, P.K., Bone indentation recovery time correlates with bond reforming time. Nature, 414 (2001), 773–776.
154. Turner, C.H., Rho, J., Takano, Y., Tsui, T.Y., and Pharr, G.M., The elastic properties of trabecular and cortical bone tissues are similar: results from two microscopic measurement techniques. J. Biomech., 32 (1999), 437–41.
155. Tyldesley, W.R., The mechanical properties of human enamel and dentine. Briti. Dent. J., 106 (1959), 269–278.
156. Ulrich, D., van Rietbergen, B., Weinans, H., and Ruegsegger, P., Finite element analysis of trabecular bone structure: A comparison of image-based meshing techniques. J. Biomech., 31 (1998), 1187–92.
157. Van Lenthe, G.H. and Huiskes, R., How morphology predicts mechanical properties of trabecular structures depends on intraspecimen trabecular thickness variations. J. Biomech., 9 (2002), 1191–1197.
158. Van Meerbeek, B., Willems, G., Celis, J.P., Roos, J.R., Braem, M., Lambrechts, P., and Vanherle, G., Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J. Dent. Res., 72 (1993), 1434–42.
159. Van Rietbergen, B., Huiskes, R., Eckstein, F., and Ruegsegger, P., Trabecular bone tissue strains in the healthy and osteoporotic human femur. J. Bone Miner. Res., 18 (2003), 1781–8.
160. Vashishth, D., Behiri, J.C., and Bonfield, W., Crack growth resistance in cortical bone: Concept of microcrack toughening. J. Biomech., 30 (1997), 763–9.
161. Veis, A., Dentin. In: Extracellular Matrix. Tissue Function, Vol. 1. Comper WD, The Netherlands (1996), 41–75.
162. Watanabe, L.G., Marshall, G.W., Jr., and Marshall, S.J., Dentin shear strength: effects of tubule orientation and intratooth location. Dent. Mater., 12 (1996), 109–15.
163. Watts, D.C., el Mowafy, O.M., and Grant, A.A., Temperaturedependence of compressive properties of human dentin. J. Dent. Res. 66 (1987), 29–32.
164. Weiner, S. and Wagner, H.D., The material bone: Structuremechanical function relations. Ann. Rev. Mater. Sci. 28 (1998), 271–298.
165. Weyland, M. and Midgley, P.A., Electron tomography. Mater. Today, 7 (2004), 32–40.
166. Willems, G., Lambrechts, P., Braem, M., Celis, J.P., and Vanherle, G., A classification of dental composites according to their morphological and mechanical characteristics. Dent. Mater., 8 (1992), 310–9.
167. Willems, G., Celis, J.P., Lambrechts, P., Braem, M., and Vanherle, G., Hardness and Young’s modulus determined by nanoindentation technique of filler particles of dental restorative materials compared with human enamel. J. Biomed. Mater. Res., 27 (1993), 747–55.
168. Wolff, J., Das Gesetz der Transformation der Knochen. Published with support from the Royal Academy of Sciences in Berlin. A. Hirschwald, ed. Berlin, 1892. English trans. by P. Maquet and R. Furlong. The Law of Bone Remodeling. Belin, Springer- Verlag, Heidelberg (1986).
169. Xu, H.H., Smith, D.T., Jahanmir, S., Romberg, E., Kelly, J.R., Thompson, V.P., and Rekow, E.D., Indentation damage and mechanical properties of human enamel and dentin. J. Dent. Res., 77 (1998), 472–80.
170. Xu, J., Rho, J.Y., Mishra, S.R., and Fan, Z., Atomic force microscopy and nanoindentation characterization of human lamellar bone prepared by microtome sectioning and mechanical polishing technique. J. Biomed. Mater. Res. A, 67 (2003), 719–26.
171. Yamamoto, E., Crawford, P.R., Chan, D.D., and Keaveny, T.M., Development of residual strains in human vertebral trabecular bone after prolonged static and cyclic loading at low load levels. J. Biomech. 39(10) (2006), 1812–8.
172. Yamashita, J., Furman, B.R., Rawls, H.R., Wang, X., and Agrawal, C.M., The use of dynamic mechanical analysis to assess the viscoelastic properties of human cortical bone. J. Biomed. Mater. Res. 58 (2001), 47–53.
173. You, L.D., Weinbaum, S., Cowin, S.C., and Schaffler, M.B., Ultrastructure of the osteocyte process and its pericellular matrix. Anat. Rec. A Discov. Mol. Cell Evol. Biol., 278 (2004), 505–13.
174. Yu, Z. and Boseck, S., Scanning acoustic microscopy and its applications to material characterization. Rev. Modern Phys., 67 (1995), 863–891.
175. Zhang, N. and Grimm, M.J., Measurement of elastic moduli of individual trabeculae of vertebtrae using scanning acoustic microscopy. 2001 Bioengineering Conference ASME. Snowbird, Utah. 50 (2001), 283–284.
176. Zilch, H., Rohlmann, A., Bergmann, G., and Kolbel, R., Material properties of femoral cancellous bone in axial loading. Part II: Time dependent properties. Arch. Orthop. Trauma Surg., 97 (1980), 257–62.
177. Zioupos, P., Wang, X.T., and Currey, J.D., Experimental and theoretical quantification of the development of damage in fatigue tests of bone and antler. J. Biomech., 29 (1996), 989–1002.
178. Zioupos, P. X T.W., and Currey, J.D., The accumulation of fatigue microdamage in human cortical bone of two different ages in vitro. Clin. Biomech., 11 (1996), 365–375.
179. Zioupos, P., Currey, J.D., and Hamer, A.J., The role of collagen in the declining mechanical properties of aging human cortical bone. J. Biomed. Mater. Res., 45 (1999), 108–16.
180. Zysset, P.K., Guo, X.E., Hoffler, C.E., Moore, K.E., and Goldstein, S.A., Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur. J. Biomech., 32 (1999), 1005–12.