Biomechanics of trabecular bone

Annual Review of Biomedical Engineering

Volumn 3, Issue , 2001, Pages 307-333

  Keaveny, T M ^a   Morgan, E F ^a   Niebur, G L ^a   Yeh, O C ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AGING; ANISOTROPY; BIOMECHANICS; BONE DENSITY; BONE REMODELING; BONE STRENGTH; BONE STRUCTURE; ELASTICITY; EXPERIMENTAL MODEL; FATIGUE; FINITE ELEMENT ANALYSIS; FRACTURE; HUMAN; IMPLANT; MEDICAL RESEARCH; NONHUMAN; ORGAN DISTRIBUTION; OSTEOPOROSIS; PHYSICAL STRESS; REVIEW; TRABECULAR BONE; WEIGHT BEARING;

AGING; BIOMECHANICS; BONE AND BONES; BONE DENSITY; ELASTICITY; HUMANS; IMAGE PROCESSING, COMPUTER-ASSISTED;

EID: 0034802787     PISSN: 15239829     EISSN: None     Source Type: Book Series    
DOI: 10.1146/annurev.bioeng.3.1.307     Document Type: Review

References (134)

1. The mechanical properties of trabecular bone: Dependence on anatomic location and function
2. A 20-year perspective on the mechanical properties of trabecular bone
3. Elastic and viscoelastic properties of trabecular bone by a compression testing approach
4. Prediction of femoral fracture load using finite element models: An examination of stress- and strain-based failure theories
5. Prediction of femoral fracture load using automated finite element modeling
6. Validation of an automated method of 3-dimensional finite element modeling of bone
7. Correlation of computed finite element stresses to bone density after remodeling around cementless femoral implants
8. Femoral strength is better predicted by finite element models than QCT and DXA
9. Effect of bone distribution on vertebral strength: Assessment with a patient-specific nonlinear finite element analysis
10. Computed tomography-based finite element analysis predicts failure loads and fracture patterns for vertebral sections
11. Mechanical consequences of bone ingrowth in a hip prosthesis inserted without cement
12. Stress distributions within the proximal femur during gait and falls: Implications for osteoporotic fracture
13. Fracture prediction for the proximal femur using finite element models. Part I: Linear analysis
14. Fracture prediction for the proximal femur using finite element models. Part II: Non-linear analysis
15. Limitations of the continuum assumption in cancellous bone
16. A global relationship between trabecular bone morphology and homogenized elastic properties
17. A comparison of the fatigue behavior of human trabecular and cortical bone tissue
18. The mechanical properties of human tibial trabecular bone as a function of metaphyseal location
19. Mechanical property distributions in the cancellous bone of the human proximal femur
20. Age-related changes in the compressive strength of cancellous bone. The relative importance of changes in density and trabecular architecture
21. Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals
22. Normal vertebral body size and compressive strength: Relations to age and to vertebral and iliac trabecular bone compressive strength
23. Age variations in the properties of human tibial trabecular bone
24. The effect of variation in structure on the Young's modulus of cancellous bone: A comparison of human and nonhuman material
25. Evaluation of orthogonal mechanical properties and density of human trabecular bone from the major metaphyseal regions with materials testing and computed tomography
26. Properties and an anisotropic model of cancellous bone from the proximal tibial epiphysis
27. Physical properties of trabecular bone
28. Wolff's Law of trabecular architecture at remodeling equilibrium
29. The anisotropic hooke's law for cancellous bone and wood
30. Fabric and elastic principal directions of cancellous bone are closely related
31. The fabric dependence of the orthotropic elastic constants of cancellous bone
32. Errors introduced by off-axis measurements of the elastic properties of bone
33. The quantitative morphology of anisotropic trabecular bone
34. A stereological method for calculating internal surface areas in structures which have become anisotropic as the result of linear expansions or contractions
35. Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor
36. The relationship between the elasticity tensor and the fabric tensor
37. On the relationship between the orthotropic Young's moduli and fabric
38. Constitutive relationships of fabric, density, and elastic properties in cancellous bone architecture
39. The relationship between the structural and orthogonal compressive properties of trabecular bone
40. Effects of structural variation on Young's modulus of nonhuman cancellous bone
41. On Wolff's law of trabecular architecture
42. Evaluation of a microcomputer tomography system to study trabecular bone structure
43. In vivo, three-dimensional microscopy of trabecular bone
44. A microtomographic system for the non-destructive evaluation of bone architecture
45. High-resolution magnetic resonance imaging: Three-dimensional trabecular bone architecture and biomechanical properties
46. Trabecular bone morphology from micro-magnetic resonance imaging
47. A direct method for fast three-dimensional serial reconstruction
48. Three-dimensional imaging of trabecular bone using the Computer Numerically Controlled Milling technique
49. Estimation of structural anisotropy based on volume orientation. A new concept
50. Three-dimensional methods for quantification of cancellous bone architecture
51. Characterizing structural anisotropy: A new concept
52. Mechanistic approaches to analysis of trabecular bone
53. An alternative model for anisotropic elasticity based on fabric tensors
54. Trabecular bone modulus and strength can depend on specimen geometry
55. Theoretical analysis of the experimental artifact in trabecular bone compressive modulus
56. Systematic and random errors in compression testing of trabecular bone
57. The effect of specimen geometry on the mechanical behaviour of trabecular bone specimens
58. The underestimation of Young's modulus in compressive testing of cancellous bone specimens
59. Compressive axial strain distributions in cancellous bone specimens
60. The effect of constraint on the mechanical behaviour of trabecular bone specimens
61. The impact of boundary conditions and mesh size on the accuracy of cancellous bone tissue modulus determination using large scale finite element modeling
62. The compressive behavior of bone as a two-phase porous structure
63. On the dependence of the elasticity and strength of cancellous bone on apparent density
64. Yield strain behavior of trabecular bone
65. Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur
66. Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation
67. Biomechanical effects of intra-specimen variations in trabecular architecture: A three-dimensional finite element study
68. Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus
69. The dependence of shear failure properties of bovine tibial trabecular bone on apparent density and trabecular orientation
70. Failure mechanisms in human vertebral cancellous bone
71. X-ray quantitative computed tomography: The relations to physical properties of proximal tibial trabecular bone specimens
72. Yield behavior of bovine cancellous bone
73. Isotropy of uniaxial yield strains for bovine trabecular bone
74. Dependence of yield strain on anatomic site for human trabecular bone
75. Multiaxial strength characteristics of trabecular bone
76. A cellular solid criterion for predicting the axial-shear failure properties of trabecular bone
77. Application of the Tsai-Wu quadratic multiaxial failure criterion to bovine trabecular bone
78. A general theory for strength of anisotropic materials
79. Phenomenological anisotropic failure criterion
80. Bone microdamage and skeletal fragility in osteoporotic and stress fractures
81. Microcalluses of the trabeculae in lumbar vertebrae and their relation to the bone mineral content
82. Microcallus formations of the cancellous bone: A quantitative analysis of the human spine
83. Trabecular bone volume and microdamage accumulation in the femoral heads of women with and without femoral neck fractures
84. Assessment of cancellous bone quality in severe osteoarthrosis: Bone mineral density, mechanics, and microdamage
85. Mechanical behavior of human trabecular bone after overloading
86. A possible mechanism of Wolff's law: Trabecular microfractures
87. Repair of trabecular fatigue fractures. Cadaver studies of the upper femur
88. Trabecular microfractures in the acetabulum. Histologic studies in cadavers
89. Mechanical behavior of damaged trabecular bone
90. A 3D damage model for trabecular bone based on fabric tensors
91. Biomechanical consequences of an isolated overload on the human vertebral body
92. Vertebral fractures in the elderly occur with falling and bending
93. Incidence of clinically diagnosed vertebral fractures: A population-based study in Rochester, Minnesota, 1985-1989
94. Some viscoplastic characteristics of bovine and human cortical bone
95. Dependence of trabecular damage on mechanical strain
96. Three-dimensional confocal images of microdamage in cancellous bone
97. In vivo diffuse damage in human vertebral trabecular bone
98. Mechanical properties of human cancellous bone in the femoral head
99. Material properties of femoral cancellous bone in axial loading. Part II: Time dependent properties
100. Compressive creep behavior of bovine trabecular bone
101. Compressive fatigue behavior of bovine trabecular bone
102. Creep contributes to the fatigue behavior of bovine trabecular bone
103. Residual strength of equine bone is not reduced by intense fatigue loading: Implications for stress fracture
104. A model of vertebral trabecular bone architecture and its mechanical properties
105. Modeling the mechanical behavior of vertebral trabecular bone: Effects of age-related changes in microstructure
106. The effects of nonperiodic microstructure and defects on the compressive strength of two-dimensional cellular solids
107. A cellular solid model for modulus reduction due to resorption of trabeculae in bone
108. Finite element modeling of damage accumulation in trabecular bone under cyclic loading
109. A homogenization sampling procedure for calculating trabecular bone effective stiffness and tissue level stress
110. A new method to determine trabecular bone elastic properties and loading using micromechanical finite element models
111. Load transfer analysis of the distal radius from in vivo high-resolution CT-imaging
112. Tissue stresses and strain in trabeculae of a canine proximal femur can be quantified from computer reconstructions
113. Computational strategies for iterative solutions of large FEM applications employing voxel data
114. Large-scale vectorized implicit calculation in solid mechanics on a Cray X-MP/48 utilizing EBE preconditioned conjugate gradients
115. Convergence behavior of high-resolution finite element models of trabecular bone
116. Numerical errors and uncertainties in finite-element modeling of trabecular bone
117. The accuracy of digital image-based finite element models
118. The role of an effective isotropic tissue modulus in the elastic properties of cancellous bone
119. Human vertebral body apparent and hard tissue stiffness
120. Finite-element modeling of trabecular bone: Comparison with mechanical testing and determination of tissue modulus
121. High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone
122. Young's modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements
123. Mechanical properties and the hierarchical structure of bone
124. The elastic properties of trabecular and cortical bone tissues are similar: Results from two microscopic measurement techniques
125. Direct mechanics assessment of elastic symmetries and properties of trabecular bone architecture
126. Relationships between bone morphology and bone elastic properties can be accurately quantified using high-resolution computer reconstructions
127. Material properties of femoral cancellous bone in axial loading. Part I: Time independent properties
128. Mechanical properties of trabecular bone from the proximal femur: A quantitative CT study
129. A study of the compressive properties of lumbar vertebral trabeculae: Effects of tissue characteristics