Accuracy of intraoral digital impressions for whole upper jaws, including full dentitions and palatal soft tissues

PLoS ONE

Volumn 11, Issue 7, 2016, Pages

  Gan, Ning ^a   Xiong, Yaoyang ^a   Jiao, Ting ^a  

^a SHANGHAI JIAO TONG UNIVERSITY SCHOOL OF MEDICINE   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ADULT; ARTICLE; COMPUTER PROGRAM; CONTROLLED STUDY; DENTAL IMPRESSION; DENTITION; DIGITAL IMAGING; FEMALE; HUMAN; HUMAN EXPERIMENT; IN VIVO STUDY; MALE; MAXILLA; MEASUREMENT ACCURACY; MEASUREMENT PRECISION; NORMAL HUMAN; PALATE; THREE DIMENSIONAL IMAGING; TOOTH ARCH; ANATOMY AND HISTOLOGY; COMPUTER AIDED DESIGN; DENTAL PROCEDURE; DEVICES; IMAGE PROCESSING; PROCEDURES; REPRODUCIBILITY; SOFTWARE; STANDARDS; TOOTH; YOUNG ADULT;

BIOMEDICAL AND DENTAL MATERIALS; CALCIUM SULFATE;

ADULT; CALCIUM SULFATE; COMPUTER-AIDED DESIGN; DENTAL ARCH; DENTAL IMPRESSION MATERIALS; DENTAL IMPRESSION TECHNIQUE; DENTAL MODELS; DENTITION; FEMALE; HUMANS; IMAGE PROCESSING, COMPUTER-ASSISTED; IMAGING, THREE-DIMENSIONAL; MALE; MAXILLA; PALATE; REPRODUCIBILITY OF RESULTS; SOFTWARE; TOOTH; YOUNG ADULT;

EID: 84978062169     PISSN: None     EISSN: 19326203     Source Type: Journal    
DOI: 10.1371/journal.pone.0158800     Document Type: Article

References (24)

1. Seelbach P, Brueckel C, Wostmann B. Accuracy of digital and conventional impression techniques and workflow. Clin Oral Investig. 2013; 17(7):1759-64. doi: 10.1007/s00784-012-0864-4 PMID: 23086333
2. Syrek A, Reich G, Ranftl D, Klein C, Cerny B, Brodesser J. Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling. J Dent. 2010; 38(7):553-9. doi: 10.1016/j.jdent.2010.03.015 PMID: 20381576
3. Brawek PK, Wolfart S, Endres L, Kirsten A, Reich S. The clinical accuracy of single crowns exclusively fabricated by digital workflow - the comparison of two systems. Clin Oral Investig. 2013; 17(9):2119-25. doi: 10.1007/s00784-013-0923-5 PMID: 23371756
4. Moreno A, Gimenez B, Ozcan M, Pradies G. A clinical protocol for intraoral digital impression of screw-retained CAD/CAM framework on multiple implants based on wavefront sampling technology. Implant dentistry. 2013; 22(4):320-5. doi: 10.1097/ID.0b013e3182980fe9 PMID: 23817542
5. Lee SJ, Betensky RA, Gianneschi GE, Gallucci GO. Accuracy of digital versus conventional implant impressions. Clin Oral Implants Res. 2015; 26(6):715-9. doi: 10.1111/clr.12375 PMID: 24720423
6. Goodacre CJ, Garbacea A, Naylor WP, Daher T, Marchack CB, Lowry J. CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data. The Journal of prosthetic dentistry. 2012; 107(1):34-46. doi: 10.1016/S0022-3913(12)60015-8 PMID: 22230914
7. Jiao T, Zhu C, Dong X, Gu X. Rehabilitation of maxillectomy defects with obturator prostheses fabricated using computer-aided design and rapid prototyping: a pilot study. Int J Prosthodont. 2014; 27(5):480-6. doi: 10.11607/ijp.3733 PMID: 25191895
8. The official website of 3 Shape Corporation. Available: http://www.3shape.com/en/new+products/dental+labs/lab+scanners.
9. Flugge TV, Schlager S, Nelson K, Nahles S, Metzger MC. Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner. Am J Orthod Dentofacial Orthop. 2013; 144(3):471-8. doi: 10.1016/j.ajodo.2013.04.017 PMID: 23992820
10. Quaas S, Rudolph H, Luthardt RG. Direct mechanical data acquisition of dental impressions for the manufacturing of CAD/CAM restorations. Journal of dentistry. 2007; 35(12):903-8. PMID: 17980951
11. Svanborg P, Skjerven H, Carlsson P, Eliasson A, Karlsson S, Ortorp A. Marginal and internal fit of cobalt-chromium fixed dental prostheses generated from digital and conventional impressions. Int J Dent. 2014; 2014:534382. doi: 10.1155/2014/534382 PMID: 24723954
12. Almeida e Silva JS, Erdelt K, Edelhoff D, Araujo E, Stimmelmayr M, Vieira LC, et al. Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques. Clin Oral Investig. 2014; 18(2):515-23. doi: 10.1007/s00784-013-0987-2 PMID: 23716064
13. Berrendero S, Salido MP, Valverde A, Ferreiroa A, Pradies G. Influence of conventional and digital intraoral impressions on the fit of CAD/CAM-fabricated all-ceramic crowns. Clin Oral Investig. 2016.
14. Gjelvold B, Chrcanovic BR, Korduner EK, Collin-Bagewitz I, Kisch J. Intraoral Digital Impression Technique Compared to Conventional Impression Technique. A Randomized Clinical Trial. J Prosthodont. 2015.
15. Patzelt SB, Vonau S, Stampf S, Att W. Assessing the feasibility and accuracy of digitizing edentulous jaws. Journal of the American Dental Association. 2013; 144(8):914-920. PMID: 23904578
16. Kattadiyil MT, Mursic Z, AlRumaih H, Goodacre CJ. Intraoral scanning of hard and soft tissues for partial removable dental prosthesis fabrication. J Prosthet Dent. 2014; 112(3):444-8. doi: 10.1016/j.prosdent.2014.03.022 PMID: 24882595
17. Michalakis KX, Asar NV, Kapsampeli V, Magkavali-Trikka P, Pissiotis AL, Hirayama H. Delayed linear dimensional changes of five high strength gypsum products used for the fabrication of definitive casts. The Journal of prosthetic dentistry. 2012; 108(3):189-95. doi: 10.1016/S0022-3913(12)60146-2 PMID: 22944315
18. Takanashi T, Shimamura I, Sakurai K. Influence of width and depth of palatal vault on rigidity of palatal strap: a finite element study. J Prosthodont Res. 2009; 53(2):95-100. doi: 10.1016/j.jpor.2008.10.002 PMID: 19318080
19. DIN ISO 5725-3:1994. Accuracy (trueness and precision) of measurement methods and results Part 3-Intermediate measures of the precision of a standard measurement(ISO 5725-3:1994).
20. Ender A, Mehl A. Accuracy of complete-arch dental impressions: A new method of measuring trueness and precision. The Journal of Prosthetic Dentistry. 2013; 109(2):121-8. doi: 10.1016/S0022-3913(13)60028-1 PMID: 23395338
21. Yan H, Xu YY, Zhao NQ. Medical Statistics, People's Medical Publishing House. 2005;Chapter 16, pp.258, ISBN:7117069082.
22. Su TS, Sun J. Comparison of repeatability between intraoral digital scanner and extraoral digital scanner: An in-vitro study. Journal of prosthodontic research. 2015.
23. Mehl A, Ender A, Mörmann W; Attin T. Accuracy testing of a new intraoral 3d camera. International journal of computerized dentistry. 2009; 12(1):11-28. PMID: 19213357
24. Rudolph H, Luthardt RG, Walter MH. Computer-aided analysis of the influence of digitizing and surfacing on the accuracy in dental CAD/CAM technology. Computers in Biology and Medicine. 2007; 37(5):579-87. PMID: 16844107