메뉴 건너뛰기




Volumn 112, Issue 3, 2014, Pages 444-448

Intraoral scanning of hard and soft tissues for partial removable dental prosthesis fabrication

Author keywords

[No Author keywords available]

Indexed keywords

CASE REPORT; COMPUTER AIDED DESIGN; COMPUTER INTERFACE; DENTAL IMPRESSION; DENTAL TECHNOLOGY; DENTURE; DEVICES; ENDODONTICS; FEMALE; HUMAN; IMAGE PROCESSING; JAW RELATION RECORD; JAW, EDENTULOUS, PARTIALLY; MAXILLA; MIDDLE AGED; PATHOLOGY; PROCEDURES; REMOVABLE PARTIAL DENTURE;

EID: 84906810234     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.prosdent.2014.03.022     Document Type: Article
Times cited : (105)

References (17)
  • 3
    • 79953732978 scopus 로고    scopus 로고
    • A protocol for immediate placement of a prefabricated screw-retained provisional prosthesis using computed tomography and guided surgery and incorporating planned alveoplasty
    • S.F. Balshi, G.J. Wolfinger, and T.J. Balshi A protocol for immediate placement of a prefabricated screw-retained provisional prosthesis using computed tomography and guided surgery and incorporating planned alveoplasty Int J Periodontics Restorative Dent 31 2011 49 55
    • (2011) Int J Periodontics Restorative Dent , vol.31 , pp. 49-55
    • Balshi, S.F.1    Wolfinger, G.J.2    Balshi, T.J.3
  • 4
    • 84855567898 scopus 로고    scopus 로고
    • CAD/CAM fabricated complete dentures: Concepts and clinical methods of obtaining required morphological data
    • C.J. Goodacre, A. Garbacea, W.P. Naylor, T. Daher, C.B. Marchack, and J. Lowry CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data J Prosthet Dent 107 2012 34 46
    • (2012) J Prosthet Dent , vol.107 , pp. 34-46
    • Goodacre, C.J.1    Garbacea, A.2    Naylor, W.P.3    Daher, T.4    Marchack, C.B.5    Lowry, J.6
  • 5
    • 84882945903 scopus 로고    scopus 로고
    • CAD/CAM complete dentures: A review of two commercial fabrication systems
    • M.T. Kattadiyil, C.J. Goodacre, and N.Z. Baba CAD/CAM complete dentures: a review of two commercial fabrication systems J Calif Dent Assoc 41 2013 407 416
    • (2013) J Calif Dent Assoc , vol.41 , pp. 407-416
    • Kattadiyil, M.T.1    Goodacre, C.J.2    Baba, N.Z.3
  • 6
    • 0023430907 scopus 로고
    • Computer aided design and manufacturing in dentistry
    • D. Rekow Computer aided design and manufacturing in dentistry J Prosthet Dent 58 1987 512 516
    • (1987) J Prosthet Dent , vol.58 , pp. 512-516
    • Rekow, D.1
  • 7
    • 0346461392 scopus 로고    scopus 로고
    • A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying
    • R.J. Williams, R. Bibb, and T. Rafik A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying J Prosthet Dent 91 2004 85 88
    • (2004) J Prosthet Dent , vol.91 , pp. 85-88
    • Williams, R.J.1    Bibb, R.2    Rafik, T.3
  • 8
    • 84455178378 scopus 로고    scopus 로고
    • CAD/CAM rapid manufacturing techniques in the fabrication of removable partial denture frameworks
    • R.J. Williams, D. Eggbeer, and R. Bibb CAD/CAM rapid manufacturing techniques in the fabrication of removable partial denture frameworks Quintessence J Dent Technol 6 2008 42 50
    • (2008) Quintessence J Dent Technol , vol.6 , pp. 42-50
    • Williams, R.J.1    Eggbeer, D.2    Bibb, R.3
  • 9
    • 84906810769 scopus 로고    scopus 로고
    • A patient-fitted removable partial denture framework fabricated from a CAD/CAM-produced sacrificial pattern
    • R.J. Williams, R. Bibb, D. Eggbeer, and A. Woodward A patient-fitted removable partial denture framework fabricated from a CAD/CAM-produced sacrificial pattern Quintessence J Dent Technol 4 2006 200 204
    • (2006) Quintessence J Dent Technol , vol.4 , pp. 200-204
    • Williams, R.J.1    Bibb, R.2    Eggbeer, D.3    Woodward, A.4
  • 10
    • 33746890834 scopus 로고    scopus 로고
    • Use of CAD/CAM technology to fabricate a removable partial denture framework
    • R.J. Williams, R. Bibb, D. Eggbeer, and J. Collis Use of CAD/CAM technology to fabricate a removable partial denture framework J Prosthet Dent 96 2006 96 99
    • (2006) J Prosthet Dent , vol.96 , pp. 96-99
    • Williams, R.J.1    Bibb, R.2    Eggbeer, D.3    Collis, J.4
  • 11
    • 20544449677 scopus 로고    scopus 로고
    • The computer-aided design and rapid prototyping of removable partial denture frameworks
    • D. Eggbeer, R. Bibb, and R. Williams The computer-aided design and rapid prototyping of removable partial denture frameworks Proc Inst Mech Eng H 219 2005 195 202
    • (2005) Proc Inst Mech Eng H , vol.219 , pp. 195-202
    • Eggbeer, D.1    Bibb, R.2    Williams, R.3
  • 12
    • 33645513556 scopus 로고    scopus 로고
    • A digital method of design and manufacture of sacrificial patterns for removable partial denture metal frameworks
    • D. Eggbeer, R.J. Williams, and R. Bibb A digital method of design and manufacture of sacrificial patterns for removable partial denture metal frameworks Quintessence J Dent Technol 2 2004 490 499
    • (2004) Quintessence J Dent Technol , vol.2 , pp. 490-499
    • Eggbeer, D.1    Williams, R.J.2    Bibb, R.3
  • 13
    • 20444391131 scopus 로고    scopus 로고
    • CAD/CAM in the fabrication of removable partial denture frameworks: A virtual method of surveying 3D scanned dental casts
    • R.J. Williams, R. Bibb, and D. Eggbeer CAD/CAM in the fabrication of removable partial denture frameworks: a virtual method of surveying 3D scanned dental casts Quintessence J Dent Technol 2 2004 268 276
    • (2004) Quintessence J Dent Technol , vol.2 , pp. 268-276
    • Williams, R.J.1    Bibb, R.2    Eggbeer, D.3
  • 14
    • 0040595675 scopus 로고
    • An altered-cast procedure to improve tissue support for removable partial dentures
    • R.J. Leupold, and F.J. Kratochvil An altered-cast procedure to improve tissue support for removable partial dentures J Prosthet Dent 15 1965 672 678
    • (1965) J Prosthet Dent , vol.15 , pp. 672-678
    • Leupold, R.J.1    Kratochvil, F.J.2
  • 15
    • 84905252516 scopus 로고    scopus 로고
    • Implant retention and support for distal extension partial removable dental prostheses: Satisfaction outcomes
    • T.M. Gonçalves, C.H. Campos, and R.C. Rodrigues Garcia Implant retention and support for distal extension partial removable dental prostheses: satisfaction outcomes J Prosthet Dent 112 2014 334 339
    • (2014) J Prosthet Dent , vol.112 , pp. 334-339
    • Gonçalves, T.M.1    Campos, C.H.2    Rodrigues Garcia, R.C.3
  • 16
    • 84875421618 scopus 로고    scopus 로고
    • The use of a scannable impression coping and digital impression technique to fabricate a customized anatomic abutment and zirconia restoration in the esthetic zone
    • W.S. Lin, B.T. Harris, and D. Morton The use of a scannable impression coping and digital impression technique to fabricate a customized anatomic abutment and zirconia restoration in the esthetic zone J Prosthet Dent 109 2013 187 191
    • (2013) J Prosthet Dent , vol.109 , pp. 187-191
    • Lin, W.S.1    Harris, B.T.2    Morton, D.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.