Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review

Surgery (United States)

Volumn 159, Issue 6, 2016, Pages 1485-1500

  Martelli, Nicolas ^a,b   Serrano, Carole ^a   Van Den Brink, Hélène ^b   Pineau, Judith ^a   Prognon, Patrice ^a   Borget, Isabelle ^b,c   El Batti, Salma ^a,d  

^a HÔPITAL EUROPÉEN GEORGES POMPIDOU   (France)

^b UNIVERSITÉ PARIS SACLAY   (France)

^c INSTITUT GUSTAVE ROUSSY   (France)

^d UNIVERSITÉ PARIS DESCARTES   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ACCURACY; ANATOMIC MODEL; COMPUTER ASSISTED SURGERY; HEALTH CARE COST; HUMAN; IMPLANT; MAXILLOFACIAL PROSTHESIS; OPERATING ROOM; OPERATION DURATION; PRIORITY JOURNAL; REVIEW; SURGICAL EQUIPMENT; SURGICAL GUIDE; SYSTEMATIC REVIEW; TEMPLATE (DEVICE); THREE DIMENSIONAL PRINTING; PROSTHESES AND ORTHOSES; SURGERY;

HUMANS; MODELS, ANATOMIC; PRINTING, THREE-DIMENSIONAL; PROSTHESES AND IMPLANTS; SURGICAL PROCEDURES, OPERATIVE;

EID: 84961817058     PISSN: 00396060     EISSN: 15327361     Source Type: Journal    
DOI: 10.1016/j.surg.2015.12.017     Document Type: Article

References (183)

1. F. Rengier, A. Mehndiratta, H. von Tengg-Kobligk, C.M. Zechmann, R. Unterhinninghofen, H.-U. Kauczor, and et al. 3D printing based on imaging data: review of medical applications Int J Comput Assist Radiol Surg 5 2010 335 341
2. B.C. Gross, J.L. Erkal, S.Y. Lockwood, C. Chen, and D.M. Spence Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences Anal Chem 86 2014 3240 3253
3. C.L. Ventola Medical applications for 3D printing: current and projected uses P T 39 2014 704 711
4. X. Cui, T. Boland, D.D. D'Lima, and M.K. Lotz Thermal inkjet printing in tissue engineering and regenerative medicine Recent Pat Drug Deliv Formul 6 2012 149
5. H.N. Chia, and B.M. Wu Recent advances in 3D printing of biomaterials J Biol Eng 9 2015 4
6. M.S. Kim, A.R. Hansgen, and J.D. Carroll Use of rapid prototyping in the care of patients with structural heart disease Trends Cardiovasc Med 18 2008 210 216
7. P.A. Webb A review of rapid prototyping (RP) techniques in the medical and biomedical sector J Med Eng Technol 24 2000 149 153
8. M. McGurk, A.A. Amis, P. Potamianos, and N.M. Goodger Rapid prototyping techniques for anatomical modelling in medicine Ann R Coll Surg Engl 79 1997 169 174
9. K. Torabi, E. Farjood, and S. Hamedani Rapid prototyping technologies and their applications in prosthodontics, a review of literature J Dent (Shiraz) 16 2015 1 9
10. R. Hoarau, D. Zweifel, E. Lanthemann, H. Zrounba, and M. Broome [3D planning in maxillofacial surgery] Rev Med Suisse 10 2014 1829 1830 1832-3
11. T.J. Horn, and O.L.A. Harrysson Overview of current additive manufacturing technologies and selected applications Sci Prog 95 Pt 3 2012 255 282
12. H.H. Malik, A.R.J. Darwood, S. Shaunak, P. Kulatilake, A.A. El-Hilly, O. Mulki, and et al. Three-dimensional printing in surgery: a review of current surgical applications J Surg Res 199 2015 512 522
13. E. Farré-Guasch, J. Wolff, M.N. Helder, E.A.J.M. Schulten, T. Forouzanfar, and J. Klein-Nulend Application of additive manufacturing in oral and maxillofacial surgery J Oral Maxillofac Surg 73 2015 2408 2418
14. A. Abdel-Moniem Barakat, A. Abou-ElFetouh, M.M. Hakam, H. El-Hawary, and K.M. Abdel-Ghany Clinical and radiographic evaluation of a computer-generated guiding device in bilateral sagittal split osteotomies J Craniomaxillofac Surg 42 2014 e195 e203
15. P. Abdel-Sayed, M. Kalejs, and L.K. von Segesser A new training set-up for trans-apical aortic valve replacement Interact Cardiovasc Thorac Surg 8 2009 599 601
16. H.T. Al-Ahmad, M.W. M Saleh, and A.M. Hussein Evaluation of an innovative computer-assisted sagittal split ramus osteotomy to reduce neurosensory alterations following orthognathic surgery: a pilot study Int J Med Robot 9 2013 134 141
17. A. Arora, A.N. Datarkar, R.M. Borle, A. Rai, and D.G. Adwani Custom-made implant for maxillofacial defects using rapid prototype models J Oral Maxillofac Surg 71 2013 e104 e110
18. N. Ayoub, A. Ghassemi, M. Rana, M. Gerressen, D. Riediger, F. Hölzle, and et al. Evaluation of computer-assisted mandibular reconstruction with vascularized iliac crest bone graft compared to conventional surgery: a randomized prospective clinical trial Trials 15 2014 114
19. M. Azuma, T. Yanagawa, N. Ishibashi-Kanno, F. Uchida, T. Ito, K. Yamagata, and et al. Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity Head Face Med 10 2014 45
20. S. Bai, B. Bo, Y. Bi, B. Wang, J. Zhao, Y. Liu, and et al. CAD/CAM surface templates as an alternative to the intermediate wafer in orthognathic surgery Oral Surg Oral Med Oral Pathol Oral Radiol Endod 110 2010 e1 e7
21. L. Bellanova, L. Paul, and P.-L. Docquier Surgical guides (patient-specific instruments) for pediatric tibial bone sarcoma resection and allograft reconstruction Sarcoma 2013 2013 787653
22. J. Brie, T. Chartier, C. Chaput, C. Delage, B. Pradeau, F. Caire, and et al. A new custom made bioceramic implant for the repair of large and complex craniofacial bone defects J Craniomaxillofac Surg 41 2013 403 407
23. F. Bruyère, C. Leroux, L. Brunereau, and P. Lermusiaux Rapid prototyping model for percutaneous nephrolithotomy training J Endourol 22 2008 91 96
24. P. Bullock, D. Dunaway, L. McGurk, and R. Richards Integration of image guidance and rapid prototyping technology in craniofacial surgery Int J Oral Maxillofac Surg 42 2013 970 973
25. P.J. Byrne, and J.R. Garcia Autogenous nasal tip reconstruction of complex defects: a structural approach employing rapid prototyping Arch Facial Plast Surg 9 2007 358 364
26. C.L. Cheung, T. Looi, T.S. Lendvay, J.M. Drake, and W.A. Farhat Use of 3-dimensional printing technology and silicone modeling in surgical simulation: development and face validation in pediatric laparoscopic pyeloplasty J Surg Educ 71 2014 762 767
27. W.-C. Ching, R.C.W. Goh, C.-L. Lin, L.-J. Lo, and Y.-R. Chen Aesthetic restoration of fronto-orbital deformity with prefabricated implant utilizing modeling clay and rapid-prototyping technology Aesthetic Plast Surg 35 2011 1176 1179
28. L.K. Chow, and L.K. Cheung The usefulness of stereomodels in maxillofacial surgical management J Oral Maxillofac Surg 65 2007 2260 2268
29. L. Ciocca, F. De Crescenzio, M. Fantini, and R. Scotti Rehabilitation of the nose using CAD/CAM and rapid prototyping technology after ablative surgery of squamous cell carcinoma: a pilot clinical report Int J Oral Maxillofac Implants 25 2010 808 812
30. L. Ciocca, M. Fantini, F. De Crescenzio, G. Corinaldesi, and R. Scotti Direct metal laser sintering (DMLS) of a customized titanium mesh for prosthetically guided bone regeneration of atrophic maxillary arches Med Biol Eng Comput 49 2011 1347 1352
31. L. Ciocca, M. Fantini, F. De Crescenzio, F. Persiani, and R. Scotti Computer-aided design and manufacturing construction of a surgical template for craniofacial implant positioning to support a definitive nasal prosthesis Clin Oral Implants Res 22 2011 850 856
32. L. Ciocca, S. Mazzoni, M. Fantini, F. Persiani, C. Marchetti, and R. Scotti CAD/CAM guided secondary mandibular reconstruction of a discontinuity defect after ablative cancer surgery J Craniomaxillofac Surg 40 2012 e511 e515
33. L. Ciocca, C. Marchetti, S. Mazzoni, P. Baldissara, M.R.A. Gatto, R. Cipriani, and et al. Accuracy of fibular sectioning and insertion into a rapid-prototyped bone plate, for mandibular reconstruction using CAD-CAM technology J Craniomaxillofac Surg 43 2015 28 33
34. A. Cohen, A. Laviv, P. Berman, R. Nashef, and J. Abu-Tair Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology Oral Surg Oral Med Oral Pathol Oral Radiol Endod 108 2009 661 666
35. J. Cui, L. Chen, X. Guan, L. Ye, H. Wang, and L. Liu Surgical planning, three-dimensional model surgery and preshaped implants in treatment of bilateral craniomaxillofacial post-traumatic deformities J Oral Maxillofac Surg 72 2014 1138.e1 1138.e14
36. E.L.S. da Rosa, C.F. Oleskovicz, and B.N. Aragão Rapid prototyping in maxillofacial surgery and traumatology: case report Braz Dent J 15 2004 243 247
37. K.-R. Dai, M.-N. Yan, Z.-A. Zhu, and Y.-H. Sun Computer-aided custom-made hemipelvic prosthesis used in extensive pelvic lesions J Arthroplasty 22 2007 981 986
38. R.E. Day, D.T. Guy, A.M. Kop, and D.A. Morrison The Royal Perth Hospital method for the design and manufacture of titanium cranioplasty plates Br J Oral Maxillofac Surg 50 2012 376 377
39. T.R. Deshmukh, A.M. Kuthe, and B. Vaibhav Preplanning and simulation of surgery using rapid modelling J Med Eng Technol 34 2010 291 294
40. R. Dhakshyani, Y. Nukman, N.A.A. Osman, and C. Vijay Preliminary report: rapid prototyping models for Dysplastic hip surgery Cent Eur J Med 6 2011 266 270
41. J.G.G. Dobbe, J.C. Vroemen, S.D. Strackee, and G.J. Streekstra Patient-tailored plate for bone fixation and accurate 3D positioning in corrective osteotomy Med Biol Eng Comput 51 2013 19 27
42. H. Du, X. Tian, T. Li, J. Yang, K. Li, G. Pei, and et al. Use of patient-specific templates in hip resurfacing arthroplasty: experience from sixteen cases Int Orthop 37 2013 777 782
43. P.S. D'Urso, O.D. Williamson, and R.G. Thompson Biomodeling as an aid to spinal instrumentation Spine 30 2005 2841 2845
44. D. Eggbeer, and P. Evans Computer-aided methods in bespoke breast prosthesis design and fabrication Proc Inst Mech Eng H 225 2011 94 99
45. B.O. Erbano, A.C. Opolski, M. Olandoski, J.A. Foggiatto, L.F. Kubrusly, U.A. Dietz, and et al. Rapid prototyping of three-dimensional biomodels as an adjuvant in the surgical planning for intracranial aneurysms Acta Cir Bras 28 2013 756 761
46. C. Faur, N. Crainic, C. Sticlaru, and C. Oancea Rapid prototyping technique in the preoperative planning for total hip arthroplasty with custom femoral components Wien Klin Wochenschr 125 2013 144 149
47. F. Feng, H. Wang, X. Guan, W. Tian, W. Jing, J. Long, and et al. Mirror imaging and preshaped titanium plates in the treatment of unilateral malar and zygomatic arch fractures Oral Surg Oral Med Oral Pathol Oral Radiol Endod 112 2011 188 194
48. M. Frame, and J.S. Huntley Rapid prototyping in orthopaedic surgery: a user's guide ScientificWorldJournal 2012 2012 838575
49. N. Gerber, L. Stieglitz, M. Peterhans, L.P. Nolte, A. Raabe, and S. Weber Using rapid prototyping molds to create patient specific polymethylmethacrylate implants in cranioplasty Conf Proc IEEE Eng Med Biol Soc 2010 2010 3357 3360
50. X. Gong, and Q. Yu Correction of maxillary deformity in infants with bilateral cleft lip and palate using computer-assisted design Oral Surg Oral Med Oral Pathol Oral Radiol 114 5 Suppl 2012 S74 S78
51. J. Guarino, S. Tennyson, G. McCain, L. Bond, K. Shea, and H. King Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis J Pediatr Orthop 27 2007 955 960
52. G. Guevara-Rojas, M. Figl, K. Schicho, R. Seemann, H. Traxler, A. Vacariu, and et al. Patient-specific polyetheretherketone facial implants in a computer-aided planning workflow J Oral Maxillofac Surg 72 2014 1801 1812
53. A. Håkansson, M. Rantatalo, T. Hansen, and A. Wanhainen Patient specific biomodel of the whole aorta - the importance of calcified plaque removal VASA 40 2011 453 459
54. B. Hammer, C. Zizelmann, and K. Scheufler Solid modeling in surgery of the anterior skull base J Oral Maxillofac Surg 21 2010 96 99
55. T. Hananouchi, M. Saito, T. Koyama, K. Hagio, T. Murase, N. Sugano, and et al. Tailor-made surgical guide based on rapid prototyping technique for cup insertion in total hip arthroplasty Int J Med Robot 5 2009 164 169
56. M.M. Hatamleh, and J. Watson Construction of an implant-retained auricular prosthesis with the aid of contemporary digital technologies: a clinical report J Prosthodont 22 2013 132 136
57. Y. He, H.G. Zhu, Z.Y. Zhang, J. He, and R. Sader Three-dimensional model simulation and reconstruction of composite total maxillectomy defects with fibula osteomyocutaneous flap flow-through from radial forearm flap Oral Surg Oral Med Oral Pathol Oral Radiol Endod 108 2009 e6 e12
58. C. Herlin, M. Koppe, J.-L. Béziat, and A. Gleizal Rapid prototyping in craniofacial surgery: using a positioning guide after zygomatic osteotomy - A case report J Craniomaxillofac Surg 39 2011 376 379
59. T. Hierl, S. Arnold, D. Kruber, F.-P. Schulze, and H. Hümpfner-Hierl CAD-CAM-assisted esthetic facial surgery J Oral Maxillofac Surg 71 2013 e15 e23
60. M. Hirao, S. Ikemoto, H. Tsuboi, S. Akita, S. Ohshima, Y. Saeki, and et al. Computer assisted planning and custom-made surgical guide for malunited pronation deformity after first metatarsophalangeal joint arthrodesis in rheumatoid arthritis: a case report Comput Aided Surg 19 2014 13 19
61. J.-S. Hou, M. Chen, C.-B. Pan, Q. Tao, J.-G. Wang, C. Wang, and et al. Immediate reconstruction of bilateral mandible defects: management based on computer-aided design/computer-aided manufacturing rapid prototyping technology in combination with vascularized fibular osteomyocutaneous flap J Oral Maxillofac Surg 69 2011 1792 1797
62. M.-K. Hsieh, A.C.-Y. Chen, C.-Y. Cheng, Y.-C. Chou, Y.-S. Chan, and K.-Y. Hsu Repositioning osteotomy for intra-articular malunion of distal radius with radiocarpal and/or distal radioulnar joint subluxation J Trauma 69 2010 418 422
63. Y.J. Hu, A. Hardianto, S.Y. Li, Z.Y. Zhang, and C.P. Zhang Reconstruction of a palatomaxillary defect with vascularized iliac bone combined with a superficial inferior epigastric artery flap and zygomatic implants as anchorage Int J Oral Maxillofac Surg 36 2007 854 857
64. S.-S. Hung, Z.-L. Lee, and Z.-L. Lee Clinical application of rapid prototype model in pediatric proximal femoral corrective osteotomy Orthopedics 31 2008 72
65. E. Huotilainen, R. Jaanimets, J. Valášek, P. Marcián, M. Salmi, J. Tuomi, and et al. Inaccuracies in additive manufactured medical skull models caused by the DICOM to STL conversion process J Craniomaxillofac Surg 42 2014 e259 e265
66. C. Hurson, A. Tansey, B. O'Donnchadha, P. Nicholson, J. Rice, and J. McElwain Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures Injury 38 2007 1158 1162
67. M.T. Izatt, P.L.P.J. Thorpe, R.G. Thompson, P.S. D'Urso, C.J. Adam, J.W.S. Earwaker, and et al. The use of physical biomodelling in complex spinal surgery Eur Spine J 16 2007 1507 1518
68. S. Jacobs, R. Grunert, F.W. Mohr, and V. Falk 3D-Imaging of cardiac structures using 3D heart models for planning in heart surgery: a preliminary study Interact Cardiovasc Thorac Surg 7 2008 6 9
69. H.-S. Jeong, K.-J. Park, K.-M. Kil, S. Chong, H.-J. Eun, T.-S. Lee, and et al. Minimally invasive plate osteosynthesis using 3D printing for shaft fractures of clavicles: technical note Arch Orthop Trauma Surg 134 2014 1551 1555
70. R. Jirman, Z. Horák, J. Mazánek, and J. Reznícek Individual replacement of the frontal bone defect: case report Prague Med Rep 110 2009 79 84
71. P. Juergens, Z. Krol, H.-F. Zeilhofer, J. Beinemann, K. Schicho, R. Ewers, and et al. Computer simulation and rapid prototyping for the reconstruction of the mandible J Oral Maxillofac Surg 67 2009 2167 2170
72. P. Kasprzak, G. Tomaszewski, G. Wróbel-Wiśniewska, and M. Zawirski Polypropylene-polyester cranial prostheses prepared with CAD/CAM technology. Report of first 15 cases Clin Neurol Neurosurg 113 2011 311 315
73. T. Kataoka, K. Oka, J. Miyake, S. Omori, H. Tanaka, and T. Murase 3-Dimensional prebent plate fixation in corrective osteotomy of malunited upper extremity fractures using a real-sized plastic bone model prepared by preoperative computer simulation J Hand Surg Am 38 2013 909 919
74. Y. Kawaguchi, M. Nakano, T. Yasuda, S. Seki, T. Hori, and T. Kimura Development of a new technique for pedicle screw and Magerl screw insertion using a 3-dimensional image guide Spine 37 2012 1983 1988
75. S.J. Key, P.L. Evans, A. Bocca, H. Whittet, and K.C. Silvester Production of custom-made bungs using computed tomography and rapid prototyping: a novel method to correct nasoseptal defects Br J Oral Maxillofac Surg 46 2008 507 508
76. U. Klammert, H. Böhm, T. Schweitzer, K. Würzler, U. Gbureck, J. Reuther, and et al. Multi-directional Le Fort III midfacial distraction using an individual prefabricated device J Craniomaxillofac Surg 37 2009 210 215
77. K. Kono, A. Shintani, H. Okada, and T. Terada Preoperative simulations of endovascular treatment for a cerebral aneurysm using a patient-specific vascular silicone model Neurol Med Chir (Tokyo) 53 2013 347 351
78. V.S. Konstantinović, V.S. Todorović, and V.M. Lazić Possibilities of reconstruction and implant-prosthetic rehabilitation following mandible resection Vojnosanit Pregl 70 2013 80 85
79. M. Kozakiewicz, M. Elgalal, P. Loba, P. Komuński, P. Arkuszewski, A. Broniarczyk-Loba, and et al. Clinical application of 3D pre-bent titanium implants for orbital floor fractures J Craniomaxillofac Surg 37 2009 229 234
80. M. Kozakiewicz, M. Elgalal, L. Piotr, A. Broniarczyk-Loba, and L. Stefanczyk Treatment with individual orbital wall implants in humans - 1-year ophthalmologic evaluation J Craniomaxillofac Surg 39 2011 30 36
81. M. Kunz, J.F. Rudan, G.L. Xenoyannis, and R.E. Ellis Computer-assisted hip resurfacing using individualized drill templates J Arthroplasty 25 2010 600 606
82. M. Kunz, J.F. Rudan, G.C.A. Wood, and R.E. Ellis Registration stability of physical templates in hip surgery Stud Health Technol Inform 163 2011 283 289
83. M. Kunz, B. Ma, J.F. Rudan, R.E. Ellis, and D.R. Pichora Image-guided distal radius osteotomy using patient-specific instrument guides J Hand Surg Am 38 2013 1618 1624
84. C. Leiggener, E. Messo, A. Thor, H.-F. Zeilhofer, and J.-M. Hirsch A selective laser sintering guide for transferring a virtual plan to real time surgery in composite mandibular reconstruction with free fibula osseous flaps Int J Oral Maxillofac Surg 38 2009 187 192
85. B. Lethaus, P. Kessler, R. Boeckman, L.J. Poort, and R. Tolba Reconstruction of a maxillary defect with a fibula graft and titanium mesh using CAD/CAM techniques Head Face Med 6 2010 16
86. B. Lethaus, L. Poort, R. Böckmann, R. Smeets, R. Tolba, and P. Kessler Additive manufacturing for microvascular reconstruction of the mandible in 20 patients J Craniomaxillofac Surg 40 2012 43 46
87. J.P. Levine, J.S. Bae, M. Soares, L.E. Brecht, P.B. Saadeh, D.J. Ceradini, and et al. Jaw in a day: total maxillofacial reconstruction using digital technology Plast Reconstr Surg 131 2013 1386 1391
88. H. Li, L. Wang, Y. Mao, Y. Wang, K. Dai, and Z. Zhu Revision of complex acetabular defects using cages with the aid of rapid prototyping J Arthroplasty 28 2013 1770 1775
89. J. Li, Y. Hsu, E. Luo, A. Khadka, and J. Hu Computer-aided design and manufacturing and rapid prototyped nanoscale hydroxyapatite/polyamide (n-HA/PA) construction for condylar defect caused by mandibular angle ostectomy Aesthetic Plast Surg 35 2011 636 640
90. J. Li, P. Li, H. Lu, L. Shen, W. Tian, J. Long, and et al. Digital design and individually fabricated titanium implants for the reconstruction of traumatic zygomatico-orbital defects J Craniofac Surg 24 2013 363 368
91. M. Li, X. Lin, and Y. Xu The application of rapid prototyping technique in chin augmentation Aesthetic Plast Surg 34 2010 172 178
92. P. Li, W. Tang, J. Li, and D.W. Tian Preliminary application of virtual simulation and reposition template for zygomatico-orbitomaxillary complex fracture J Craniofac Surg 23 2012 1436 1439
93. W.Z. Li, M.C. Zhang, S.P. Li, L.T. Zhang, and Y. Huang Application of computer-aided three-dimensional skull model with rapid prototyping technique in repair of zygomatico-orbito-maxillary complex fracture Int J Med Robot 5 2009 158 163
94. P. Liacouras, J. Garnes, N. Roman, A. Petrich, and G.T. Grant Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report J Prosthet Dent 105 2011 78 82
95. O. Lieger, R. Richards, M. Liu, and T. Lloyd Computer-assisted design and manufacture of implants in the late reconstruction of extensive orbital fractures Arch Facial Plast Surg 12 2010 186 191
96. C.G.T. Lim, D.I. Campbell, and D.M. Clucas Rapid prototyping technology in orbital floor reconstruction: application in three patients Craniomaxillofac Trauma Reconstr 7 2014 143 146
97. X. Liu, L. Gui, C. Mao, X. Peng, and G. Yu Applying computer techniques in maxillofacial reconstruction using a fibula flap: a messenger and an evaluation method J Craniofac Surg 20 2009 372 377
98. Y. Liu, L. Xu, H. Zhu, and S.S.-Y. Liu Technical procedures for template-guided surgery for mandibular reconstruction based on digital design and manufacturing Biomed Eng Online 13 2014 63
99. S. Lu, Y.Q. Xu, W.W. Lu, G.X. Ni, Y.B. Li, J.H. Shi, and et al. A novel patient-specific navigational template for cervical pedicle screw placement Spine 34 2009 E959 E966
100. S. Lu, Y.Q. Xu, Y.Z. Zhang, L. Xie, H. Guo, and D.P. Li A novel computer-assisted drill guide template for placement of C2 laminar screws Eur Spine J 18 2009 1379 1385
101. I. Madrazo, C. Zamorano, E. Magallón, T. Valenzuela, A. Ibarra, H. Salgado-Ceballos, and et al. Stereolithography in spine pathology: a 2-case report Surg Neurol 72 2009 272 275 discussion 275
102. F. Mahmood, K. Owais, M. Montealegre-Gallegos, R. Matyal, P. Panzica, A. Maslow, and et al. Echocardiography derived three-dimensional printing of normal and abnormal mitral annuli Ann Card Anaesth 17 2014 279 283
103. K. Mao, Y. Wang, S. Xiao, Z. Liu, Y. Zhang, X. Zhang, and et al. Clinical application of computer-designed polystyrene models in complex severe spinal deformities: a pilot study Eur Spine J 19 2010 797 802
104. E. Maravelakis, K. David, A. Antoniadis, A. Manios, N. Bilalis, and Y. Papaharilaou Reverse engineering techniques for cranioplasty: a case study J Med Eng Technol 32 2008 115 121
105. M. Markert, S. Weber, and T.C. Lueth A beating heart model 3D printed from specific patient data Conf Proc IEEE Eng Med Biol Soc 2007 2007 4472 4475
106. M.E. Mavili, H.I. Canter, B. Saglam-Aydinatay, S. Kamaci, and I. Kocadereli Use of three-dimensional medical modeling methods for precise planning of orthognathic surgery J Craniofac Surg 18 2007 740 747
107. M. Merc, I. Drstvensek, M. Vogrin, T. Brajlih, and G. Recnik A multi-level rapid prototyping drill guide template reduces the perforation risk of pedicle screw placement in the lumbar and sacral spine Arch Orthop Trauma Surg 133 2013 893 899
108. J. Mizutani, T. Matsubara, M. Fukuoka, N. Tanaka, H. Iguchi, A. Furuya, and et al. Application of full-scale three-dimensional models in patients with rheumatoid cervical spine Eur Spine J 17 2008 644 649
109. A. Modabber, M. Gerressen, M.B. Stiller, N. Noroozi, A. Füglein, F. Hölzle, and et al. Computer-assisted mandibular reconstruction with vascularized iliac crest bone graft Aesthetic Plast Surg 36 2012 653 659
110. A. Modabber, C. Legros, M. Rana, M. Gerressen, D. Riediger, and A. Ghassemi Evaluation of computer-assisted jaw reconstruction with free vascularized fibular flap compared to conventional surgery: a clinical pilot study Int J Med Robot 8 2012 215 220
111. A. Modabber, N. Ayoub, S.C. Möhlhenrich, E. Goloborodko, T.T. Sönmez, M. Ghassemi, and et al. The accuracy of computer-assisted primary mandibular reconstruction with vascularized bone flaps: iliac crest bone flap versus osteomyocutaneous fibula flap Med Devices (Auckl) 7 2014 211 217
112. S. Mottl-Link, M. Hübler, T. Kühne, U. Rietdorf, J.J. Krueger, B. Schnackenburg, and et al. Physical models aiding in complex congenital heart surgery Ann Thorac Surg 86 2008 273 277
113. D.J. Murray, G. Edwards, J.G. Mainprize, and O. Antonyshyn Optimizing craniofacial osteotomies: applications of haptic and rapid prototyping technology J Oral Maxillofac Surg 66 2008 1766 1772
114. D.J. Murray, G. Edwards, J.G. Mainprize, and O. Antonyshyn Advanced technology in the management of fibrous dysplasia J Plast Reconstr Aesthet Surg 61 2008 906 916
115. S.F. Mustafa, P.L. Evans, A. Bocca, D.W. Patton, A.W. Sugar, and P.W. Baxter Customized titanium reconstruction of post-traumatic orbital wall defects: a review of 22 cases Int J Oral Maxillofac Surg 40 2011 1357 1362
116. E.M. Ngan, I.M. Rebeyka, D.B. Ross, M. Hirji, J.F. Wolfaardt, R. Seelaus, and et al. The rapid prototyping of anatomic models in pulmonary atresia J Thorac Cardiovasc Surg 132 2006 264 269
117. R.Y.S. Ngo, and H.P. Lee Fabrication of patient specific fasciaform molds for formaldehyde fasciaform grafting tympanoplasty Technol Health Care 17 2009 411 418
118. L. Olivieri, A. Krieger, M.Y. Chen, P. Kim, and J.P. Kanter 3D heart model guides complex stent angioplasty of pulmonary venous baffle obstruction in a Mustard repair of D-TGA Int J Cardiol 172 2014 e297 e298
119. R. Olszewski, K. Tranduy, and H. Reychler Innovative procedure for computer-assisted genioplasty: three-dimensional cephalometry, rapid-prototyping model and surgical splint Int J Oral Maxillofac Surg 39 2010 721 724
120. R. Olszewski, and H. Reychler Three-dimensional surgical guide for frontal-nasal-ethmoid-vomer disjunction in Le Fort III osteotomy J Craniofac Surg 22 2011 1791 1792
121. B. Otsuki, M. Takemoto, K. Kawanabe, Y. Awa, H. Akiyama, S. Fujibayashi, and et al. Developing a novel custom cutting guide for curved peri-acetabular osteotomy Int Orthop 37 2013 1033 1038
122. J.-Y. Paeng, J.-H. Lee, J.-H. Lee, and M.-J. Kim Condyle as the point of rotation for 3-D planning of distraction osteogenesis for hemifacial microsomia J Craniomaxillofac Surg 35 2007 91 102
123. W.S. Paiva, R. Amorim, D.A.F. Bezerra, and M. Masini Application of the stereolithography technique in complex spine surgery Arq Neuropsiquiatr 65 2B 2007 443 445
124. P.D. Parchi, V. Ferrari, N. Piolanti, L. Andreani, S. Condino, G. Evangelisti, and et al. Computer tomography prototyping and virtual procedure simulation in difficult cases of hip replacement surgery Surg Technol Int 23 2013 228 234
125. A. Patel, D. Otterburn, P. Saadeh, J. Levine, and D.L. Hirsch 3D volume assessment techniques and computer-aided design and manufacturing for preoperative fabrication of implants in head and neck reconstruction Facial Plast Surg Clin North Am 19 2011 683 709 ix
126. M.J. Peltola, P.K. Vallittu, V. Vuorinen, A.A.J. Aho, A. Puntala, and K.M.J. Aitasalo Novel composite implant in craniofacial bone reconstruction Eur Arch Otorhinolaryngol 269 2012 623 628
127. M.J. Pilley, C. Hitchens, G. Rose, S. Alexander, and D.I. Wimpenny The use of non-contact structured light scanning in burns pressure splint construction Burns 37 2011 1168 1173
128. E. Prisman, S.K. Haerle, J.C. Irish, M. Daly, B. Miles, and H. Chan Value of preoperative mandibular plating in reconstruction of the mandible Head Neck 36 2014 828 833
129. D. Rohner, R. Guijarro-Martínez, P. Bucher, and B. Hammer Importance of patient-specific intraoperative guides in complex maxillofacial reconstruction J Craniomaxillofac Surg 41 2013 382 390
130. H. Rotaru, M. Baciut, H. Stan, S. Bran, H. Chezan, A. Iosif, and et al. Silicone rubber mould cast polyethylmethacrylate-hydroxyapatite plate used for repairing a large skull defect J Craniomaxillofac Surg 34 2006 242 246
131. H. Rotaru, H. Stan, I.S. Florian, R. Schumacher, Y.-T. Park, S.-G. Kim, and et al. Cranioplasty with custom-made implants: analyzing the cases of 10 patients J Oral Maxillofac Surg 70 2012 e169 e176
132. K. Rude, T.H. Thygesen, and J.A. Sørensen Reconstruction of the maxilla using a fibula graft and virtual planning techniques BMJ Case Rep 2014 2014 bcr2014203601
133. J.V. Sabol, G.T. Grant, P. Liacouras, and S. Rouse Digital image capture and rapid prototyping of the maxillofacial defect J Prosthodont 20 2011 310 314
134. F. Salles, M. Anchieta, P. Costa Bezerra, M.L.G.M. Torres, E. Queiroz, and J. Faber Complete and isolated congenital aglossia: case report and treatment of sequelae using rapid prototyping models Oral Surg Oral Med Oral Pathol Oral Radiol Endod 105 2008 e41 e47
135. M. Salmi, K.-S. Paloheimo, J. Tuomi, J. Wolff, and A. Mäkitie Accuracy of medical models made by additive manufacturing (rapid manufacturing) J Craniomaxillofac Surg 41 2013 603 609
136. E.K. Sannomiya, J.V.L. Silva, A.A. Brito, D.M. Saez, F. Angelieri, and S. Dalben G da Surgical planning for resection of an ameloblastoma and reconstruction of the mandible using a selective laser sintering 3D biomodel Oral Surg Oral Med Oral Pathol Oral Radiol Endod 106 2008 e36 e40
137. J.-T. Schantz, T.-C. Lim, C. Ning, S.H. Teoh, K.C. Tan, S.C. Wang, and et al. Cranioplasty after trephination using a novel biodegradable burr hole cover: technical case report Neurosurgery 58(1) 1 Suppl 2006 ONS - E176; discussion ONS - E176
138. S. Schievano, F. Migliavacca, L. Coats, S. Khambadkone, M. Carminati, N. Wilson, and et al. Percutaneous pulmonary valve implantation based on rapid prototyping of right ventricular outflow tract and pulmonary trunk from MR data Radiology 242 2007 490 497
139. A. Schweizer, P. Fürnstahl, and L. Nagy Three-dimensional correction of distal radius intra-articular malunions using patient-specific drill guides J Hand Surg Am 38 2013 2339 2347
140. L. Seres, E. Varga, A. Kocsis, Z. Rasko, B. Bago, E. Varga, and et al. Correction of a severe facial asymmetry with computerized planning and with the use of a rapid prototyped surgical template: a case report/technique article Head Face Med 10 2014 27
141. D. Shu, X. Liu, B. Guo, W. Ran, X. Liao, and Y. Zhang Accuracy of using computer-aided rapid prototyping templates for mandible reconstruction with an iliac crest graft World J Surg Oncol 12 2014 190
142. J.L. Silberstein, M.M. Maddox, P. Dorsey, A. Feibus, R. Thomas, and B.R. Lee Physical models of renal malignancies using standard cross-sectional imaging and 3-dimensional printers: a pilot study Urology 84 2014 268 272
143. S. Singare, Y. Liu, D. Li, B. Lu, J. Wang, and S. He Individually prefabricated prosthesis for maxilla reconstruction J Prosthodont 17 2008 135 140
144. R. Sodian, S. Weber, M. Markert, D. Rassoulian, I. Kaczmarek, T.C. Lueth, and et al. Stereolithographic models for surgical planning in congenital heart surgery Ann Thorac Surg 83 2007 1854 1857
145. R. Sodian, D. Schmauss, M. Markert, S. Weber, K. Nikolaou, S. Haeberle, and et al. Three-dimensional printing creates models for surgical planning of aortic valve replacement after previous coronary bypass grafting Ann Thorac Surg 85 2008 2105 2108
146. R. Sodian, D. Schmauss, C. Schmitz, A. Bigdeli, S. Haeberle, M. Schmoeckel, and et al. 3-dimensional printing of models to create custom-made devices for coil embolization of an anastomotic leak after aortic arch replacement Ann Thorac Surg 88 2009 974 978
147. M. Stoetzer, M. Rana, C. von See, A.M. Eckardt, and N.-C. Gellrich Reconstruction of defects of maxillary sinus wall after removal of a huge odontogenic lesion using prebended 3D titanium-mesh and CAD/CAM technique Head Face Med 7 2011 21
148. H. Sun, B. Li, Z. Zhao, L. Zhang, S.G.F. Shen, and X. Wang Error analysis of a CAD/CAM method for unidirectional mandibular distraction osteogenesis in the treatment of hemifacial microsomia Br J Oral Maxillofac Surg 51 2013 892 897
149. M.D. Tam, S.D. Laycock, D. Bell, and A. Chojnowski 3-D printout of a DICOM file to aid surgical planning in a 6 year old patient with a large scapular osteochondroma complicating congenital diaphyseal aclasia J Radiol Case Rep 6 2012 31 37
150. M.D.B.S. Tam, S.D. Laycock, J.R.I. Brown, and M. Jakeways 3D printing of an aortic aneurysm to facilitate decision making and device selection for endovascular aneurysm repair in complex neck anatomy J Endovasc Ther 20 2013 863 867
151. W. Tang, L. Guo, J. Long, H. Wang, Y. Lin, L. Liu, and et al. Individual design and rapid prototyping in reconstruction of orbital wall defects J Oral Maxillofac Surg 68 2010 562 570
152. F. Toso, C. Zuiani, M. Vergendo, I. Salvo, M. Robiony, M. Politi, and et al. Usefulness of computed tomography in pre-surgical evaluation of maxillo-facial pathology with rapid prototyping and surgical pre-planning by virtual reality Radiol Med 110 2005 665 675
153. M. Tricot, K.T. Duy, and P.-L. Docquier 3D-corrective osteotomy using surgical guides for posttraumatic distal humeral deformity Acta Orthop Belg 78 2012 538 542
154. G. Wang, J. Li, A. Khadka, Y. Hsu, W. Li, and J. Hu CAD/CAM and rapid prototyped titanium for reconstruction of ramus defect and condylar fracture caused by mandibular reduction Oral Surg Oral Med Oral Pathol Oral Radiol 113 2012 356 361
155. W.H. Wang, J. Zhu, J.Y. Deng, B. Xia, and B. Xu Three-dimensional virtual technology in reconstruction of mandibular defect including condyle using double-barrel vascularized fibula flap J Craniomaxillofac Surg 41 2013 417 422
156. V. Waran, V. Narayanan, R. Karuppiah, S.L.F. Owen, and T. Aziz Utility of multimaterial 3D printers in creating models with pathological entities to enhance the training experience of neurosurgeons J Neurosurg 120 2014 489 492
157. V. Waran, V. Narayanan, R. Karuppiah, D. Pancharatnam, H. Chandran, R. Raman, and et al. Injecting realism in surgical training-initial simulation experience with custom 3D models J Surg Educ 71 2014 193 197
158. R.A. Watson A low-cost surgical application of additive fabrication J Surg Educ 71 2014 14 17
159. C. Westendorff, J. Kaminsky, U. Ernemann, S. Reinert, and J. Hoffmann Image-guided sphenoid wing meningioma resection and simultaneous computer-assisted cranio-orbital reconstruction: technical case report Neurosurgery 60(2) 2 suppl 2007 ONSE173-4; discussion ONSE174
160. J.V. Williams, and P.J. Revington Novel use of an aerospace selective laser sintering machine for rapid prototyping of an orbital blowout fracture Int J Oral Maxillofac Surg 39 2010 182 184
161. M. Yamazaki, T. Akazawa, A. Okawa, and M. Koda Usefulness of three-dimensional full-scale modeling of surgery for a giant cell tumor of the cervical spine Spinal Cord 45 2007 250 253
162. J.C. Yang, X.Y. Ma, J. Lin, Z.H. Wu, K. Zhang, and Q.S. Yin Personalised modified osteotomy using computer-aided design-rapid prototyping to correct thoracic deformities Int Orthop 35 2011 1827 1832
163. M. Yang, C. Li, Y. Li, Y. Zhao, X. Wei, G. Zhang, and et al. Application of 3D rapid prototyping technology in posterior corrective surgery for Lenke 1 adolescent idiopathic scoliosis patients Medicine (Baltimore) 94 2015 e582
164. F. Yoshioka, S. Ozawa, S. Okazaki, and Y. Tanaka Fabrication of an orbital prosthesis using a noncontact three-dimensional digitizer and rapid-prototyping system J Prosthodont 19 2010 598 600
165. N.N. Zein, I.A. Hanouneh, P.D. Bishop, M. Samaan, B. Eghtesad, C. Quintini, and et al. Three-dimensional print of a liver for preoperative planning in living donor liver transplantation Liver Transpl 19 2013 1304 1310
166. S. Zhang, X. Liu, Y. Xu, C. Yang, G. Undt, M. Chen, and et al. Application of rapid prototyping for temporomandibular joint reconstruction J Oral Maxillofac Surg 69 2011 432 438
167. Y. Zhang, S. Lu, Y. Xu, J. Shi, Y. Li, and Z. Feng Application of navigation template to fixation of sacral fracture using three-dimensional reconstruction and reverse engineering technique Chin J Traumatol 12 2009 214 217
168. Y.Z. Zhang, B. Chen, S. Lu, Y. Yang, J.M. Zhao, R. Liu, and et al. Preliminary application of computer-assisted patient-specific acetabular navigational template for total hip arthroplasty in adult single development dysplasia of the hip Int J Med Robot 7 2011 469 474
169. Y.Z. Zhang, S. Lu, B. Chen, J.M. Zhao, R. Liu, and G.X. Pei Application of computer-aided design osteotomy template for treatment of cubitus varus deformity in teenagers: a pilot study J Shoulder Elbow Surg 20 2011 51 56
170. L. Zhou, L. He, H. Shang, G. Liu, J. Zhao, and Y. Liu Correction of hemifacial microsomia with the help of mirror imaging and a rapid prototyping technique: case report Br J Oral Maxillofac Surg 47 2009 486 488
171. L. Zhou, H. Shang, L. He, B. Bo, G. Liu, Y. Liu, and et al. Accurate reconstruction of discontinuous mandible using a reverse engineering/computer-aided design/rapid prototyping technique: a preliminary clinical study J Oral Maxillofac Surg 68 2010 2115 2121
172. A. Macario What does one minute of operating room time cost? J Clin Anesth 22 2010 233 236
173. C. Sorenson, M. Drummond, and B. Bhuiyan-Khan Medical technology as a key driver of rising health expenditure: disentangling the relationship Clinicoecon Outcomes Res 5 2013 223 234
174. T. Morineau, X. Morandi, N.L. Moëllic, S. Diabira, L. Riffaud, C. Haegelen, and et al. Decision making during preoperative surgical planning Hum Factors 51 2009 67 77
175. S.H. Parker, S. Yule, R. Flin, and A. McKinley Towards a model of surgeons' leadership in the operating room BMJ Qual Saf 20 2011 570 579
176. J.N. Fullerton, G.C.M. Frodsham, and R.M. Day 3D printing for the many, not the few Nat Biotechnol 32 2014 1086 1087
177. M.P. Chae, W.M. Rozen, P.G. McMenamin, M.W. Findlay, R.T. Spychal, and D.J. Hunter-Smith Emerging Applications of Bedside 3D Printing in Plastic Surgery Front Surg 2 2015 25
178. L.S. Bertol, W.K. Júnior, F.P. da Silva, and C. Aumund-Kopp Medical design: direct metal laser sintering of Ti-6Al-4V Mater Des 31 2010 3982 3988
179. R.J. Morrison, K.N. Kashlan, C.L. Flanangan, J.K. Wright, G.E. Green, S.J. Hollister, and et al. Regulatory considerations in the design and manufacturing of implantable 3D-printed medical devices Clin Transl Sci 8 2015 594 600
180. Food and Drug Administration. Public Workshop - Additive Manufacturing of Medical Devices: An Interactive Discussion on the Technical Considerations of 3D Printing, October 8-9, 2014 [Internet]. [cited 2015 Aug 12]. Available from: www.fda.gov/MedicalDevices/NewsEvents/WorkshopsConferences/ucm397324.htm
181. D. Ketelsen, C. Thomas, J. Schmehl, C.W. König, R. Syha, K. Rittig, and et al. Endovascular aneurysm repair of abdominal aortic aneurysms: standards, technical options and advanced indications Rofo 186 2014 337 347
182. P.B. Burns, R.J. Rohrich, and K.C. Chung The Levels of Evidence and their role in Evidence-Based Medicine Plast Reconstr Surg 128 2011 305 310
183. R.P. Merkow, and C.Y. Ko Evidence-based medicine in surgery: the importance of both experimental and observational study designs JAMA 306 2011 436 437