Application of Additive Manufacturing in Oral and Maxillofacial Surgery

Journal of Oral and Maxillofacial Surgery

Volumn 73, Issue 12, 2015, Pages 2408-2418

  Farré Guasch, Elisabet ^a   Wolff, Jan ^b   Helder, Marco N ^b   Schulten, Engelbert A J M ^b   Forouzanfar, Tim ^b   Klein Nulend, Jenneke ^a  

^a UNIVERSITY OF AMSTERDAM   (Netherlands)

^b VU UNIVERSITY MEDICAL CENTER   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMATERIAL;

ADIPOSE DERIVED STEM CELL; ARTICLE; BIOPRINTING; BONE DEFECT; BONE GRAFT; BONE TISSUE; CLINICAL PRACTICE; COMPUTER AIDED DESIGN; EX VIVO STUDY; GOOD MANUFACTURING PRACTICE; HUMAN; MAXILLOFACIAL SURGERY; ORAL SURGERY; THREE DIMENSIONAL PRINTING; TISSUE ENGINEERING; TISSUE SCAFFOLD; VIRTUAL REALITY; BONE TRANSPLANTATION; COMPUTER ASSISTED SURGERY; DEVICES; PROCEDURES; RECONSTRUCTIVE SURGERY; SINUS FLOOR AUGMENTATION; THREE DIMENSIONAL IMAGING;

BONE TRANSPLANTATION; HUMANS; IMAGING, THREE-DIMENSIONAL; RECONSTRUCTIVE SURGICAL PROCEDURES; SINUS FLOOR AUGMENTATION; SURGERY, COMPUTER-ASSISTED; SURGERY, ORAL; TISSUE ENGINEERING; TISSUE SCAFFOLDS;

EID: 84934326455     PISSN: 02782391     EISSN: 15315053     Source Type: Journal    
DOI: 10.1016/j.joms.2015.04.019     Document Type: Review

References (65)

1. S. Bhumiratana, and G. Vunjak-Novakovic Concise review: Personalized human bone grafts for reconstructing head and face Stem Cells Transl Med 1 2012 64
2. G.L. De Lange, J.R. Overman, E. Farré-Guasch, and et al. A histomorphometric and micro-computed tomography study of bone regeneration in the maxillary sinus comparing biphasic calcium phosphate and deproteinized cancellous bovine bone in a human split-mouth model Oral Surg Oral Med Oral Pathol Oral Radiol 117 2014 8
3. G.K. Sándor, V.J. Tuovinen, J. Wolff, and et al. Adipose stem cell tissue-engineered construct used to treat large anterior mandibular defect: A case report and review of the clinical application of good manufacturing practice-level adipose stem cells for bone regeneration J Oral Maxillofac Surg 71 2013 938
4. C.L. Morris, R.F. Barber, and R. Day Orofacial prosthesis design and fabrication using stereolithography Aust Dent J 45 2000 250
5. H. Petite, K. Vandamme, L. Monfoulet, and et al. Strategies for improving the efficacy of bioengineered bone constructs: A perspective Osteoporos Int 22 2011 2017
6. B. Levi, J.P. Glotzbach, V.W. Wong, and et al. Stem cells: Update and impact on craniofacial surgery J Craniofac Surg 23 2012 319
7. V. Petrovic, P. Zivkovic, D. Petrovic, and et al. Craniofacial bone tissue engineering Oral Surg Oral Med Oral Pathol Oral Radiol 114 2012 e1
8. S. Haimi, N. Suuriniemi, A.M. Haaparanta, and et al. Growth and osteogenic differentiation of adipose stem cells on PLA/bioactive glass and PLA/beta-TCP scaffolds Tissue Eng Part A 15 2009 1473
9. J. Li, Y. Hsu, E. Luo, and et al. Computer-aided design and manufacturing and rapid prototyped nanoscale hydroxyapatite/polyamide (n-HA/PA) construction for condylar defect caused by mandibular angle ostectomy Aesthetic Plast Surg 35 2011 636
10. L. Meseguer-Olmo, V. Vicente-Ortega, M. Alcaraz-Baños, and et al. In-vivo behavior of Si-hydroxyapatite/polycaprolactone/DMB scaffolds fabricated by 3D printing J Biomed Mater Res A 101 2013 2038
11. K. Mesimäki, B. Lindroos, J. Törnwall, and et al. Novel maxillary reconstruction with ectopic bone formation by GMP adipose stem cells Int J Oral Maxillofac Surg 38 2009 201
12. D. Rohner, D.W. Hutmacher, T.K. Cheng, and et al. In vivo efficacy of bone-marrow-coated polycaprolactone scaffolds for the reconstruction of orbital defects in the pig J Biomed Mater Res B Appl Biomater 66 2003 574
13. A.J. Salgado, O.P. Coutinho, and R.L. Reis Bone tissue engineering: State of the art and future trends Macromol Biosci 4 2004 743
14. H. Xu, D. Han, J.S. Dong, and et al. Rapid prototyped PGA/PLA scaffolds in the reconstruction of mandibular condyle bone defects Int J Med Robot 6 2010 66
15. J.R. Overman, E. Farré-Guasch, M.N. Helder, and et al. Short (15 minutes) bone morphogenetic protein-2 treatment stimulates osteogenic differentiation of human adipose stem cells seeded on calcium phosphate scaffolds in vitro Tissue Eng Part A 19 2013 571
16. J. Wolff, G.K. Sándor, A. Miettinen, and et al. GMP-level adipose stem cells combined with computer-aided manufacturing to reconstruct mandibular ameloblastoma resection defects: Experience with three cases Ann Maxillofac Surg 3 2013 114
17. M. Knippenberg, M.N. Helder, B. Zandieh Doulabi, and et al. Osteogenesis versus chondrogenesis by BMP-2 and BMP-7 in adipose stem cells Biochem Biophys Res Commun 342 2006 902
18. G.K. Sándor, J. Numminen, J. Wolff, and et al. Adipose stem cells used to reconstruct 13 cases with cranio-maxillofacial hard-tissue defects Stem Cells Transl Med 3 2014 530
19. N.E. Fedorovich, W. Schuurman, H.M. Wijnberg, and et al. Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds Tissue Eng Part C Methods 18 2012 33
20. M. Schindler, A. Nur-E-Kamal, I. Ahmed, and et al. Living in three dimensions: 3D nanostructured environments for cell culture and regenerative medicine Cell Biochem Biophys 45 2006 215
21. H. Saijo, K. Igawa, Y. Kanno, and et al. Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology J Artif Organs 12 2009 200
22. L. Ciocca, M. Fantini, F. De Crescenzio, and et al. Direct metal laser sintering (DMLS) of a customized titanium mesh for prosthetically guided bone regeneration of atrophic maxillary arches Med Biol Eng Comput 49 2011 1347
23. L. Ciocca, D. Donati, S. Ragazzini, and et al. Mesenchymal stem cells and platelet gel improve bone deposition within CAD-CAM custom-made ceramic HA scaffolds for condyle substitution Biomed Res Int 2013 2013 549762
24. A.A. Mueller, P. Paysan, R. Schumacher, and et al. Missing facial parts computed by a morphable model and transferred directly to a polyamide laser-sintered prosthesis: An innovation study Br J Oral Maxillofac Surg 49 2011 e67
25. Y. Sun, H.T. Luebbers, J.O. Agbaje, and et al. Accuracy of upper jaw positioning with intermediate splint fabrication after virtual planning in bimaxillary orthognathic surgery J Craniofac Surg 24 2013 1871
26. F.G. Mangano, M. De Franco, A. Caprioglio, and et al. Immediate, non-submerged, root-analogue direct laser metal sintering (DLMS) implants: A 1-year prospective study on 15 patients Lasers Med Sci 29 2013 1321
27. C. Mangano, A. Piattelli, S. d'Avila, and et al. Early human bone response to laser metal sintering surface topography: A histologic report J Oral Implantol 36 2010 91
28. G. Wang, J. Li, A. Khadka, and et al. CAD/CAM and rapid prototyped titanium for reconstruction of ramus defect and condylar fracture caused by mandibular reduction Oral Surg Oral Med Oral Pathol Oral Radiol 113 2012 356
29. D. Ibrahim, T.L. Broilo, C. Heitz, and et al. Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy J Craniomaxillofac Surg 37 2009 167
30. D.N. Silva, M. Gerhardt de Oliveira, E. Meurer, and et al. Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction J Craniomaxillofac Surg 36 2008 443
31. A. Butscher, M. Bohner, S. Hofmann, and et al. Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing Acta Biomater 7 2011 907
32. P. Mehra, J. Miner, R. D'Innocenzo, and et al. Use of 3-D stereolithographic models in oral and maxillofacial surgery J Maxillofac Oral Surg 10 2011 6
33. M. Salmi, K.S. Paloheimo, J. Tuomi, and et al. Accuracy of medical models made by additive manufacturing (rapid manufacturing) J Craniomaxillofac Surg 41 2013 603
34. B. Duan, M. Wang, W.Y. Zhou, and et al. Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering Acta Biomater 6 2010 4495
35. C. Mavroidis, R.G. Ranky, M.L. Sivak, and et al. Patient specific ankle-foot orthoses using rapid prototyping J Neuroeng Rehabil 8 2011 1
36. C. Mangano, M. Raspanti, T. Traini, and et al. Stereo imaging and cytocompatibility of a model dental implant surface formed by direct laser fabrication J Biomed Mater Res A 88 2009 823
37. S. Stübinger, I. Mosch, P. Robotti, and et al. Histological and biomechanical analysis of porous additive manufactured implants made by direct metal laser sintering: A pilot study in sheep J Biomed Mater Res B Appl Biomater 101 2013 1154
38. A. Armillotta, P. Bonhoeffer, G. Dubini, and et al. Use of rapid prototyping models in the planning of percutaneous pulmonary valved stent implantation Proc Inst Mech Eng H 221 2007 407
39. D.W. Hutmacher, T. Schantz, I. Zein, and et al. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling J Biomed Mater Res 55 2001 203
40. S. Wüst, R. Müller, and S. Hofmann Controlled positioning of cells in biomaterials - Approaches towards 3D tissue printing J Funct Biomater 2 2011 119
41. B. Guillotin, and F. Guillemot Cell patterning technologies for organotypic tissue fabrication Trends Biotechnol 29 2011 183
42. B.R. Ringeisen, C.M. Othon, J.A. Barron, and et al. Jet-based methods to print living cells Biotechnol J 1 2006 930
43. E.A. Roth, T. Xu, M. Das, and et al. Inkjet printing for high-throughput cell patterning Biomaterials 25 2004 3707
44. L. Koch, M. Gruene, C. Unger, and et al. Laser assisted cell printing Curr Pharm Biotechnol 14 2013 91
45. P.K. Wu, and B.R. Ringeisen Development of human umbilical vein endothelial cell (HUVEC) and human umbilical vein smooth muscle cell (HUVSMC) branch/stem structures on hydrogel layers via biological laser printing (BioLP) Biofabrication 2 2010 014111
46. X. Cui, K. Breitenkamp, M.G. Finn, and et al. Direct human cartilage repair using three-dimensional bioprinting technology Tissue Eng Part A 18 2012 1304
47. V. Mironov, N. Reis, and B. Derby Bioprinting: A beginning Tissue Eng 12 2006 631
48. J.A. Phillippi, E. Miller, L. Weiss, and et al. Microenvironments engineered by inkjet bioprinting spatially direct adult stem cells toward muscle-and bone-like subpopulations Stem Cells 26 2008 127
49. T. Xu, W. Zhao, J.M. Zhu, and et al. Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology Biomaterials 34 2013 130
50. D. Muller, H. Chim, A. Bader, and et al. Vascular guidance: Microstructural scaffold patterning for inductive neovascularization Stem Cells Int 2011 2010 547247
51. J.B. Park Use of cell-based approaches in maxillary sinus augmentation procedures J Craniofac Surg 21 2010 557
52. W. Wu, Q. He, X. Li, and et al. Long-term cultured human neural stem cells undergo spontaneous transformation to tumor-initiating cells Int J Biol Sci 7 2011 892
53. E. Farré-Guasch, H.J. Prins, J.R. Overman, and et al. Human maxillary sinus floor elevation as a model for bone regeneration enabling the application of one-step surgical procedures Tissue Eng Part B Rev 19 2013 69
54. M.N. Helder, M. Knippenberg, J. Klein-Nulend, and et al. Stem cells from adipose tissue allow challenging new concepts for regenerative medicine Tissue Eng 13 2007 1799
55. Prins H, Helder MN, Overman JR, et al. Bone augmentation with adipose stem cells and calcium phosphate carriers for human maxillary sinus floor elevation: An ongoing phase I clinical trial. Presented at: Proceedings of the 9th Annual Symposium on Adipose Stem Cells and Clinical Applications of Adipose Tissue; Miami, FL; 2011. Abstract, p 54, 2011.
56. M. Knippenberg, M.N. Helder, B. Zandieh Doulabi, and et al. Adipose tissue-derived mesenchymal stem cells acquire bone cell-like responsiveness to fluid shear stress on osteogenic stimulation Tissue Eng 11 2005 1780
57. M. Knippenberg, M.N. Helder, B. Zandieh Doulabi, and et al. Differential effects of bone morphogenetic protein-2 and transforming growth factor-beta1 on gene expression of collagen-modifying enzymes in human adipose tissue-derived mesenchymal stem cells Tissue Eng Part A 15 2009 2213
58. T.A. Ahmed, E.V. Dare, and M. Hincke Fibrin: A versatile scaffold for tissue engineering applications Tissue Eng Part B Rev 14 2008 199
59. G.S. Tjabringa, B. Zandieh-Doulabi, M.N. Helder, and et al. The polymine spermine regulates osteogenic differentiation in adipose stem cells J Cell Mol Med 12 2008 1710
60. E. Farré-Guasch, C. Martí-Pagè, F. Hernádez-Alfaro, and et al. Buccal fat pad, an oral access source of human adipose stem cells with potential for osteochondral tissue engineering: An in vitro study Tissue Eng Part C Methods 16 2010 1083
61. L. Zimmerlin, V.S. Donnenberg, M.E. Pfeifer, and et al. Stromal vascular progenitors in adult human adipose tissue Cytometry A 77 2010 22
62. W.L. Grayson, M. Fröhlich, K. Yeager, and et al. Engineering anatomically shaped human bone grafts Proc Natl Acad Sci U S A 107 2010 3299
63. Frank MC, Hunt CV, Anderson DD, et al. Rapid manufacturing in biomedical materials: Using subtractive rapid prototyping for bone replacement. Presented at: Proceedings of the Solid Freeform Fabrication Symposium; Austin, TX. p 686, 2008.
64. L. Ciocca, D. Donati, M. Fantini, and et al. CAD-CAM-generated hydroxyapatite scaffold to replace the mandibular condyle in sheep: Preliminary results J Biomater Appl 28 2013 207
65. T. Boland, T. Xu, B. Damon, and et al. Application of inkjet printing to tissue engineering Biotechnol J 1 2006 910