Data-Driven Analysis of Downtime Impacts in Parallel Production Systems

IEEE Transactions on Automation Science and Engineering

Volumn 12, Issue 4, 2015, Pages 1541-1547

  Li, Yang ^a   Chang, Qing ^b   Xiao, Guoxian ^c   Arinez, Jorge ^c  

^a TONGJI UNIVERSITY   (China)

^b Stony Brook University   (United States)

^c GENERAL MOTORS CORPORATION   (United States)

Author keywords

Continuous improvement; data driven production system analysis; parallel production system; permanent production loss

Indexed keywords

MANUFACTURE; PRODUCTION CONTROL; REAL TIME CONTROL;

COMPUTATIONAL PROCEDURES; DATA-DRIVEN ANALYSIS; MULTI-STAGE MANUFACTURING SYSTEMS; PARALLEL PRODUCTION LINES; PARALLEL PRODUCTION SYSTEMS; PARALLEL STRUCTURES; REAL-TIME PRODUCTION; SERIAL PRODUCTION LINE;

MAINTENANCE;

EID: 84960488975     PISSN: 15455955     EISSN: None     Source Type: Journal    
DOI: 10.1109/TASE.2015.2443111     Document Type: Article

References (36)

1. J. Li, "Throughput analysis in automotive paint shops: A case study," IEEE Trans. Autom. Sci. Eng., vol. 1, no. 1, pp. 90-98, Jul 2004.
2. S. Y. Chiang, A. Hu, and S. M. Meerkov, "Lean buffering in serial production lines with nonidentical exponential machines," IEEE Trans. Autom. Sci. Eng., vol. 5, no. 2, pp. 298-306, Apr. 2008.
3. J. Li and S. M. Meerkov, Production Systems Engineering. Livermore, CA, USA: WingSpan Press, 2008.
4. S. M. Meerkov and L. Zhang, "Transient behavior of serial production lines with Bernoulli machines," IIE Trans., vol. 40, no. 3, pp. 297-312, 2008.
5. H. Kobayashi and Q. Ren, "A mathematical theory for transient analysis of communication networks," IEICE Trans. Commun., vol. 12, pp. 1266-1276, 1992.
6. J. Liu, Q. Chang, G. Xiao, and S. Biller, "The cost of downtime incidents in serial multistage manufacturing systems," J. Manuf. Sci. Eng., vol. 134, pp. 021016-1, 2012.
7. Q. Chang, G. Xiao, S. Biller, and L. Li, "Energy saving opportunity analysis of automotive serial production systems," IEEE Trans. Autom. Sci. Eng., vol. 10, no. 2, pp. 334-342, Apr. 2013.
8. Q. Chang, J. Liu, S. Biller, and G. Xiao, "Transient analysis of downtime event in manufacturing systems," in Proc. ASME Int. Manuf. Sci. Eng. Conf., Erie, PA, USA, Oct. 12-15, 2010a.
9. Q. Chang, S. Biller, and G. Xiao, "Transient analysis of downtimes and bottleneck dynamics in serial manufacturing systems," ASME Trans. J. Manuf. Sci. Eng., vol. 132, no. 5, pp. 051015-1, 2010b.
10. Y. Ding, D. Ceglarek, and J. Shi, "Fault diagnosis of multistage manufacturing processes by using state space approach," ASME Trans. J. Manuf. Sci. Eng., vol. 124, pp. 313-322, 2002.
11. E. Ignall and A. Silver, "The output of a two-stage system with unreliable machines and limited storage," AIIE Trans., vol. 9, pp. 183-188, 1977.
12. T. Iyama and S. Ito, "The maximum production rate for an unbalanced multi-server flow line system with finite buffer storage," Int. J. Prod. Res., vol. 25, pp. 1157-1179, 1987.
13. D. Mitra, "Stochastic theory of a fluid model of producers and consumers coupled by a buffer," Adv. Appl. Probab., vol. 20, pp. 646-676, 1988.
14. J. Li, "Overlapping decomposition: a system-theoretic method for modeling and analysis of complex manufacturing systems," IEEE Trans. Autom. Sci. Eng., vol. 2, no. 1, pp. 40-53, Jan. 2005.
15. J. Li, "Modeling and analysis of manufacturing systems with parallel lines," IEEE Trans. Autom. Control, vol. 49, no. 10, pp. 1824-1832, Oct. 2004.
16. L. Lin and J. K. Cochran, "Metamodels of production line transient behavior for sudden machine breakdowns," Int. J. Prod. Res., vol. 28, no. 10, pp. 1791-1806, 1990.
17. H. Kobayashi and Q. Ren, "A mathematical theory for transient analysis of communication networks," IEICE Trans. Commun., vol. 75, no. 12, pp. 1266-1276, 1992.
18. B. Sericola, "Transient analysis of stochastic fluid models," Perf. Eval., vol. 32, no. 4, pp. 245-263, 1998.
19. S. Ahn and V. Ramaswami, "Transient analysis of fluid flow models via stochastic coupling to a queue," Stochastic Models, vol. 20, no. 1, pp. 71-101, 2004.
20. L. Zhang, C. Wang, J. Arinez, and S. Biller, "Transient analysis of Bernoulli serial lines: Performance evaluation and system-theoretic properties," IIE Trans., vol. 45, no. 5, pp. 528-543, 2013.
21. S. M. Meerkov, S. Nahum, and L. Zhang, "Transient behavior of twomachine geometric production lines," IEEE Trans. Autom. Control, vol. 55, no. 2, pp. 453-458, Feb. 2010.
22. I. Hatono, Y. Keiichi, and T. Hiroyuki, "Modeling and online scheduling of flexible manufacturing systems using stochastic Petri nets," IEEE Trans. Softw. Eng., vol. 17, no. 2, pp. 126-132, Feb., 1991.
23. G. Horton, V. G. Kulkarni, D. M. Nicol, and K. S. Trivedi, "Fluid stochastic Petri nets: Theory, applications, and solution techniques," Eur. J. Oper. Res., vol. 105, no. 1, pp. 184-201, 1998.
24. R. Zurawski and M. Zhou, "Petri nets and industrial applications: A tutorial," IEEE Trans. Ind. Electron., vol. 41, no. 6, pp. 567-583, Dec. 1994.
25. G. Tuncel and G. M. Bayhan, "Applications of Petri nets in production scheduling: a review," Int. J. Adv. Manuf. Technol., vol. 34, no. 7-8, pp. 762-773, 2007.
26. Z. Gao and X. Dai, "From model, signal to knowledge: A data-driven perspective of fault detection and diagnosis," IEEE Trans. Ind. Informat., vol. 9, no. 4, pp. 2226-2238, Nov. 2013.
27. Y. Lv, C. Lee, Z. Wu, H. Chan, and W. Ip, "Priority based distributed manufacturing process modeling via hierarchical timed colored Petri net," IEEE Trans. Ind. Informat., vol. 9, no. 4, pp. 1836-1846, Nov. 2013.
28. D. Wang, J. Liu, and R. Srinivasan, "Data-driven soft sensor approach for quality prediction in a refining process," IEEE Trans. Ind. Informat., vol. 6, no. 1, pp. 11-17, Feb. 2010.
29. S. Ding, S. Yin, K. Peng, H. Hao, and B. Shen, "A novel scheme for key performance indicator prediction and diagnosis with application to an industrial hot strip mill," IEEE Trans. Ind. Informat., vol. 9, no. 4, pp. 2239-2247, Nov. 2013.
30. Z. Wang and D. Liu, "A data-based state feedback control method for a class of nonlinear systems," IEEE Trans. Ind. Informat., vol. 9, no. 4, pp. 2284-2292, Nov. 2013.
31. G. Li, B. Liu, S. J. Qin, and D. Zhou, "Quality relevant data-driven modeling and monitoring of multivariate dynamic processes: The dynamic T-PLS approach," IEEE Trans. Neural Netw., vol. 9, no. 4, pp. 2262-2271, Dec. 2011.
32. B. A. Sevast'yanov, "Influence of storage bin capacity on the average standstill time of a production line," Theory of Probability and its Applicat., vol. 7, no. 4, pp. 429-438, 1962.
33. J. Wijngaard, "The effect of inter stage buffer storage on output of two unreliable production units in series with different production rates," AIIE Trans., vol. 11, no. 1, pp. 42-47, 1979.
34. S. B. Gershwin and I. C. Schick, "Continuous model of an unreliable two-stage material flow system with a finite interstage buffer," Mass. Inst. Technol., Cambridge, MA, USA, Tech. Rep. 1039, 1980.
35. J. Li, "DT-bottlenecks in serial production lines: Theory and application," IEEE Trans. Robot. Automat., vol. 16, no. 5, pp. 567-580, Oct. 2000.
36. S. Biller, J. Li, S. P. Marin, S. M. Meerkov, and L. Zhang, "Bottlenecks in Bernoulli serial lines with rework," IEEE Trans. Autom. Sci. Eng., vol. 7, no. 2, pp. 208-217, Apr. 2010.