Strength reliability and in vitro degradation of three-dimensional powder printed strontium-substituted magnesium phosphate scaffolds

Acta Biomaterialia

Volumn 31, Issue , 2016, Pages 401-411

  Meininger, Susanne ^a   Mandal, Sourav ^b   Kumar, Alok ^b   Groll, Jürgen ^a   Basu, Bikramjit ^b   Gbureck, Uwe ^a  

^a UNIVERSITY HOSPITAL WÜRZBURG   (Germany)

^b INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

Magnesium phosphate; Scaffold; Strontium; CT

Indexed keywords

BIODEGRADABILITY; BONE; CALCIUM PHOSPHATE; COMPRESSIVE STRENGTH; COMPUTERIZED TOMOGRAPHY; HYDROXYAPATITE; IONS; MAGNESIUM COMPOUNDS; MEDICAL APPLICATIONS; PORE SIZE; SCAFFOLDS; SCAFFOLDS (BIOLOGY); SINTERING; STRONTIUM; STRONTIUM COMPOUNDS; TENSILE TESTING; TRANSMISSION CONTROL PROTOCOL;

BONE FORMATION; IN-VITRO; IN-VIVO; ION RELEASE; MAGNESIUM-PHOSPHATE; PATIENT SPECIFIC; STRENGTH RELIABILITY; STRONTIUM ION; WEIBULL MODULUS; Μ-CT;

3D PRINTERS;

BIOMATERIAL; BONE CEMENT; MAGNESIUM; MAGNESIUM ION; MAGNESIUM PHOSPHATE; MOLECULAR SCAFFOLD; STRONTIUM; UNCLASSIFIED DRUG; BONE PROSTHESIS; ION; MAGNESIUM DERIVATIVE; PHOSPHATE; POWDER;

ARTICLE; BIOMECHANICS; BIOTRANSFORMATION; BONE IMPLANT; COMPRESSIVE STRENGTH; DEGRADATION; HIGH TEMPERATURE PROCEDURES; IN VITRO STUDY; MICRO-COMPUTED TOMOGRAPHY; POROSITY; POWDER; PRIORITY JOURNAL; RELIABILITY; TENSILE STRENGTH; THREE DIMENSIONAL PRINTING; X RAY DIFFRACTION; YOUNG MODULUS; ADSORPTION; BONE PROSTHESIS; CHEMISTRY; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; ORTHOPEDICS; PRESSURE; PROCEDURES; REPRODUCIBILITY; SCANNING ELECTRON MICROSCOPY; TEMPERATURE; TISSUE SCAFFOLD;

ADSORPTION; BIOCOMPATIBLE MATERIALS; BONE SUBSTITUTES; COMPRESSIVE STRENGTH; HUMANS; IONS; MAGNESIUM COMPOUNDS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; ORTHOPEDICS; PHOSPHATES; POWDERS; PRESSURE; PRINTING, THREE-DIMENSIONAL; REPRODUCIBILITY OF RESULTS; STRESS, MECHANICAL; STRONTIUM; TEMPERATURE; TENSILE STRENGTH; TISSUE SCAFFOLDS; X-RAY DIFFRACTION; X-RAY MICROTOMOGRAPHY;

EID: 84957632946     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2015.11.050     Document Type: Article

References (74)

1. B. Kanter, M. Geffers, A. Ignatius, and U. Gbureck Control of in vivo mineral bone cement degradation Acta Biomater. 10 2014 3279 3287 10.1016/j.actbio.2014.04.020
2. U. Klammert, A. Ignatius, U. Wolfram, T. Reuther, and U. Gbureck In vivo degradation of low temperature calcium and magnesium phosphate ceramics in a heterotopic model Acta Biomater. 7 2011 3469 3475 10.1016/j.actbio.2011.05.022
3. U. Kneser, D.J. Schaefer, E. Polykandriotis, and R.E. Horch Tissue engineering of bone: the reconstructive surgeon's point of view J. Cell. Mol. Med. 10 2006 7 19 10.1111/j.1582-4934.2006.tb00287.x
4. P.V. Giannoudis, H. Dinopoulos, and E. Tsiridis Bone substitutes: an update Injury 36 2005 S20 S27 10.1016/j.injury.2005.07.029
5. C.J. Damien, and J.R. Parsons Bone graft and bone graft substitutes: a review of current technology and applications J. Appl. Biomater. 2 1991 187 208 10.1002/jab.770020307
6. Z. Amjad, P.G. Koutsoukos, and G.H. Nancollas The crystallization of hydroxyapatite and fluorapatite in the presence of magnesium ions J. Colloid Interface Sci. 101 1984 250 256 10.1016/0021-9797(84)90025-0
7. M.H. Salimi, J.C. Heughebaert, and G.H. Nancollas Crystal growth of calcium phosphates in the presence of magnesium ions Langmuir 1 1985 119 122 10.1021/la00061a019
8. F. Tamimi, Z. Sheikh, and J. Barralet Dicalcium phosphate cements: brushite and monetite Acta Biomater. 8 2012 474 487 10.1016/j.actbio.2011.08.005
9. F. Tamimi, D.L. Nihouannen, H. Eimar, Z. Sheikh, S. Komarova, and J. Barralet The effect of autoclaving on the physical and biological properties of dicalcium phosphate dihydrate bioceramics: brushite vs. monetite Acta Biomater. 8 2012 3161 3169 10.1016/j.actbio.2012.04.025
10. M.E. Maguire, and J.A. Cowan Magnesium chemistry and biochemistry Biometals 15 2002 203 210 10.1023/A:1016058229972
11. J. Vormann Magnesium: nutrition and metabolism Mol. Aspects Med. 24 2003 27 37 10.1016/S0098-2997(02)00089-4
12. G.A. Quamme, and C. de Rouffignac Epithelial magnesium transport and regulation by the kidney Front Biosci. 5 2000 15
13. J.M. Topf, and P.T. Murray Hypomagnesemia and hypermagnesemia Rev. Endocr. Metab. Disord. 4 2003 195 206 10.1023/A:1022950321817
14. C. Großardt, A. Ewald, L.M. Grover, J.E. Barralet, and U. Gbureck Passive and active in vitro resorption of calcium and magnesium phosphate cements by osteoclastic cells Tissue Eng. Part A 16 2010 3687 3695 10.1089/ten.tea.2010.0281
15. T. Christel, M. Geffers, U. Klammert, B. Nies, A. Höß, J. Groll, and et al. Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules Mater. Sci. Eng. C 42 2014 130 136 10.1016/j.msec.2014.05.023
16. S. Tarafder, W.S. Dernell, A. Bandyopadhyay, and S. Bose SrO- and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: Mechanical properties and in vivo osteogenesis in a rabbit model J. Biomed. Mater. Res. B Appl. Biomater. 103 2015 679 690 10.1002/jbm.b.33239
17. U. Thormann, S. Ray, U. Sommer, T. ElKhassawna, T. Rehling, M. Hundgeburth, and et al. Bone formation induced by strontium modified calcium phosphate cement in critical-size metaphyseal fracture defects in ovariectomized rats Biomaterials 34 2013 8589 8598 10.1016/j.biomaterials.2013.07.036
18. G.X. Ni, K.Y. Chiu, W.W. Lu, Y. Wang, Y.G. Zhang, L.B. Hao, and et al. Strontium-containing hydroxyapatite bioactive bone cement in revision hip arthroplasty Biomaterials 27 2006 4348 4355 10.1016/j.biomaterials.2006.03.048
19. M. Baier, P. Staudt, R. Klein, U. Sommer, R. Wenz, I. Grafe, and et al. Strontium enhances osseointegration of calcium phosphate cement: a histomorphometric pilot study in ovariectomized rats J. Orthop. Surg. 8 2013 16
20. S. Ray Strontium modified calcium phosphate cement (SRCPC) enhances bone formation in critical-size metaphyseal osteoporotic fracture defects in rats Bone Jt. J. Orthop. Proc. Suppl. 96-B 2014 88
21. A. Sabareeswaran, B. Basu, S.J. Shenoy, Z. Jaffer, N. Saha, and A. Stamboulis Early osseointegration of a strontium containing glass ceramic in a rabbit model Biomaterials 34 2013 9278 9286 10.1016/j.biomaterials.2013.08.070
22. 2 glass ceramics over 26 weeks implantation in rabbit model: histology and micro-computed tomography analysis J. Biomed. Mater. Res. B Appl. Biomater. 103 2015 1168 1179 10.1002/jbm.b.33270
23. Z. Saidak, and P.J. Marie Strontium signaling: molecular mechanisms and therapeutic implications in osteoporosis Pharmacol. Ther. 136 2012 216 226 10.1016/j.pharmthera.2012.07.009
24. S. Bose, G. Fielding, S. Tarafder, and A. Bandyopadhyay Understanding of dopant-induced osteogenesis and angiogenesis in calcium phosphate ceramics Trends Biotechnol. 31 2013 594 605 10.1016/j.tibtech.2013.06.005
25. E. Canalis, M. Hott, P. Deloffre, Y. Tsouderos, and P.J. Marie The divalent strontium salt S12911 enhances bone cell replication and bone formation in vitro Bone 18 1996 517 523 10.1016/8756-3282(96)00080-4
26. T. Brennan, M. Rybchyn, W. Green, S. Atwa, A. Conigrave, and R. Mason Osteoblasts play key roles in the mechanisms of action of strontium ranelate Br. J. Pharmacol. 157 2009 1291 1300 10.1111/j.1476-5381.2009.00305.x
27. J. Coulombe, H. Faure, B. Robin, and M. Ruat In vitro effects of strontium ranelate on the extracellular calcium-sensing receptor Biochem. Biophys. Res. Commun. 323 2004 1184 1190 10.1016/j.bbrc.2004.08.209
28. A.D. Conigrave, and D.T. Ward Calcium-sensing receptor (CaSR): pharmacological properties and signaling pathways Best Pract. Res. Clin. Endocrinol. Metab. 27 2013 315 331 10.1016/j.beem.2013.05.010
29. S.K. Tat, J.-P. Pelletier, F. Mineau, J. Caron, and J. Martel-Pelletier Strontium ranelate inhibits key factors affecting bone remodeling in human osteoarthritic subchondral bone osteoblasts Bone 49 2011 559 567 10.1016/j.bone.2011.06.005
30. P. Kostenuik, and Victoria Shalhoub Osteoprotegerin A physiological and pharmacological inhibitor of bone resorption Curr. Pharm. Des. 7 2001 613 635 10.2174/1381612013397807
31. A.S. Hurtel-Lemaire, R. Mentaverri, A. Caudrillier, F. Cournarie, A. Wattel, S. Kamel, and et al. The calcium-sensing receptor is involved in strontium ranelate-induced osteoclast apoptosis: new insights into the associated signaling pathways J. Biol. Chem. 284 2009 575 584 10.1074/jbc.M801668200
32. F.P.W. Melchels, J. Feijen, and D.W. Grijpma A review on stereolithography and its applications in biomedical engineering Biomaterials 31 2010 6121 6130 10.1016/j.biomaterials.2010.04.050
33. J.M. Williams, A. Adewunmi, R.M. Schek, C.L. Flanagan, P.H. Krebsbach, S.E. Feinberg, and et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering Biomaterials 26 2005 4817 4827 10.1016/j.biomaterials.2004.11.057
34. E. Berry, J.M. Brown, M. Connell, C.M. Craven, N.D. Efford, A. Radjenovic, and et al. Preliminary experience with medical applications of rapid prototyping by selective laser sintering Med. Eng. Phys. 19 1997 90 96 10.1016/S1350-4533(96)00039-2
35. S. Yang, K.-F. Leong, Z. Du, and C.-K. Chua The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques Tissue Eng. 8 2002 1 11 10.1089/107632702753503009
36. H. Seitz, W. Rieder, S. Irsen, B. Leukers, and C. Tille Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering J. Biomed. Mater. Res. B Appl. Biomater. 74B 2005 782 788 10.1002/jbm.b.30291
37. E. Sachs, M. Cima, J. Cornie, D. Brancazio, J. Bredt, A. Curodeau, et al., Three dimensional printing: rapid tooling and prototypes directly from CAD representation, (1990), < http://utwired.engr.utexas.edu/lff/symposium/proceedingsArchive/pubs/Manuscripts/1990/1990-04-Sachs.pdf > (accessed November 10, 2014).
38. M. Vaezi, H. Seitz, and S. Yang A review on 3D micro-additive manufacturing technologies Int. J. Adv. Manuf. Technol. 67 2013 1721 1754 10.1007/s00170-012-4605-2
39. U. Klammert, E. Vorndran, T. Reuther, F.A. Müller, K. Zorn, and U. Gbureck Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing J. Mater. Sci. Mater. Med. 21 2010 2947 2953 10.1007/s10856-010-4148-8
40. R. Landers, and R. Mülhaupt Desktop manufacturing of complex objects, prototypes and biomedical scaffolds by means of computer-assisted design combined with computer-guided 3D plotting of polymers and reactive oligomers Macromol. Mater. Eng. 282 2000 17 21 10.1002/1439-2054(20001001)282:1<17::AID-MAME17>3.0.CO;2-8
41. V. Ramakrishna, and B. Basu Conceptual design of three-dimensional scaffolds of powder-based materials for bone tissue engineering applications Rapid Prototyping 21 2015
42. Y. Luo, A. Lode, C. Wu, and M. Gelinsky 3D-Plotting of Bioceramic Scaffolds under Physiological Conditions for Bone Tissue Engineering 2013 CRC Press
43. C. Wu, Y. Luo, G. Cuniberti, Y. Xiao, and M. Gelinsky Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability Acta Biomater. 7 2011 2644 2650 10.1016/j.actbio.2011.03.009
44. Y. Luo, C. Wu, A. Lode, and M. Gelinsky Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering Biofabrication 5 2013 015005 10.1088/1758-5082/5/1/015005
45. Y. Luo, A. Lode, C. Wu, J. Chang, and M. Gelinsky Alginate/nanohydroxyapatite scaffolds with designed core/shell structures fabricated by 3D plotting and in situ mineralization for bone tissue engineering ACS Appl. Mater. Interfaces 7 2015 6541 6549 10.1021/am508469h
46. E. Vorndran, C. Moseke, and U. Gbureck 3D printing of ceramic implants MRS Bull. 40 2015 127 136 10.1557/mrs.2015.326
47. U. Gbureck, T. Hölzel, U. Klammert, K. Würzler, F.A. Müller, and J.E. Barralet Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing Adv. Funct. Mater. 17 2007 3940 3945 10.1002/adfm.200700019
48. M. Castilho, C. Moseke, A. Ewald, U. Gbureck, J. Groll, I. Pires, and et al. Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects Biofabrication 6 2014 015006 10.1088/1758-5082/6/1/015006
49. 2 powders for 3D printing technology Adv. Appl. Ceram. 110 2011 476 481 10.1179/1743676111Y.0000000030
50. B. Leukers, H. Gülkan, S.H. Irsen, S. Milz, C. Tille, M. Schieker, and et al. Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing J. Mater. Sci. Mater. Med. 16 2005 1121 1124 10.1007/s10856-005-4716-5
51. U. Klammert, U. Gbureck, E. Vorndran, J. Rödiger, P. Meyer-Marcotty, and A.C. Kübler 3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects J. Cranio-Maxillofac. Surg. 38 2010 565 570 10.1016/j.jcms.2010.01.009
52. E. Vorndran, M. Klarner, U. Klammert, L.M. Grover, S. Patel, J.E. Barralet, and et al. 3D powder printing of β-tricalcium phosphate ceramics using different strategies Adv. Eng. Mater. 10 2008 B67 B71 10.1002/adem.200800179
53. J.A. Inzana, D. Olvera, S.M. Fuller, J.P. Kelly, O.A. Graeve, E.M. Schwarz, and et al. 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration Biomaterials 35 2014 4026 4034 10.1016/j.biomaterials.2014.01.064
54. S.C. Verberckmoes, M.E. De Broe, and P.C. D'Haese Dose-dependent effects of strontium on osteoblast function and mineralization Kidney Int. 64 2003 534 543 10.1046/j.1523-1755.2003.00123.x
55. M. Castilho, B. Gouveia, I. Pires, J. Rodrigues, and M. Pereira The role of shell/core saturation level on the accuracy and mechanical characteristics of porous calcium phosphate models produced by 3D printing Rapid Prototyping J. 21 2015 43 55 10.1108/RPJ-02-2013-0015
56. C.B. Carter, and M.G. Norton Ceramic Materials: Science and Engineering 2007 Springer New York
57. C. Moseke, C. Bayer, E. Vorndran, J.E. Barralet, J. Groll, and U. Gbureck Low temperature fabrication of spherical brushite granules by cement paste emulsion J. Mater. Sci. Mater. Med. 23 2012 2631 2637 10.1007/s10856-012-4740-1
58. D.J. Misiek, J.N. Kent, and R.F. Carr Soft tissue responses to hydroxylapatite particles of different shapes J. Oral Maxillofac. Surg. 42 1984 150 160 10.1016/S0278-2391(84)80025-7
59. W. Wang, Z. Wu, C. Wang, and R. Hu Modelling the spreading rate of controlled communicable epidemics through an entropy-based thermodynamic model Sci. China Phys. Mech. Astron. 56 2013 2143 2150 10.1007/s11433-013-5321-0
60. J. Huxley, Problems of relative growth, (1932), < http://agris.fao.org/agris-search/search.do?recordID=US201300287973 > (accessed August 5, 2015).
61. A.J. Salgado, O.P. Coutinho, and R.L. Reis Bone tissue engineering: state of the art and future trends Macromol. Biosci. 4 2004 743 765 10.1002/mabi.200400026
62. S. Bose, M. Roy, and A. Bandyopadhyay Recent advances in bone tissue engineering scaffolds Trends Biotechnol. 30 2012 546 554 10.1016/j.tibtech.2012.07.005
63. J. Rouwkema, N.C. Rivron, and C.A. van Blitterswijk Vascularization in tissue engineering Trends Biotechnol. 26 2008 434 441 10.1016/j.tibtech.2008.04.009
64. M. Lipowiecki, M. Ryvolová, Á. Töttösi, N. Kolmer, S. Naher, S.A. Brennan, and et al. Permeability of rapid prototyped artificial bone scaffold structures J. Biomed. Mater. Res. A 102 2014 4127 4135 10.1002/jbm.a.35084
65. L. Røhl, E. Larsen, F. Linde, A. Odgaard, and J. Jørgensen Tensile and compressive properties of cancellous bone J. Biomech. 24 1991 1143 1149 10.1016/0021-9290(91)90006-9
66. E.B.W. Giesen, M. Ding, M. Dalstra, and T.M.G.J. van Eijden Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic J. Biomech. 34 2001 799 803 10.1016/S0021-9290(01)00030-6
67. A.J. Wagoner Johnson, and B.A. Herschler A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair Acta Biomater. 7 2011 16 30 10.1016/j.actbio.2010.07.012
68. R.W. McCALDEN, J.A. McGEOUGH, and C.M. Court-Brown Age-related changes in the compressive strength of cancellous bone. The relative importance of changes in density and trabecular architecture J. Bone Jt. Surg. 79 1997 421 427
69. K. Rezwan, Q.Z. Chen, J.J. Blaker, and A.R. Boccaccini Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering Biomaterials 27 2006 3413 3431 10.1016/j.biomaterials.2006.01.039
70. C. Pittet, and J. Lemaître Mechanical characterization of brushite cements: a Mohr circles' approach J. Biomed. Mater. Res. 53 2000 769 780 10.1002/1097-4636(2000) 53:6<769::AID-JBM19>3.0.CO;2-P
71. S. Christ, M. Schnabel, E. Vorndran, J. Groll, and U. Gbureck Fiber reinforcement during 3D printing Mater. Lett. 139 2015 165 168 10.1016/j.matlet.2014.10.065
72. B. Basu, D. Tiwari, D. Kundu, and R. Prasad Is Weibull distribution the most appropriate statistical strength distribution for brittle materials? Ceram. Int. 35 2009 237 246 10.1016/j.ceramint.2007.10.003
73. J.M. Cordell, M.L. Vogl, and A.J. Wagoner Johnson The influence of micropore size on the mechanical properties of bulk hydroxyapatite and hydroxyapatite scaffolds J. Mech. Behav. Biomed. Mater. 2 2009 560 570 10.1016/j.jmbbm.2009.01.009
74. X.B. Chen, D.R. Nisbet, R.W. Li, P.N. Smith, T.B. Abbott, M.A. Easton, and et al. Controlling initial biodegradation of magnesium by a biocompatible strontium phosphate conversion coating Acta Biomater. 10 2014 1463 1474 10.1016/j.actbio.2013.11.016