3D Plotting of Bioceramic Scaffolds under Physiological Conditions for Bone Tissue Engineering

Advanced Bioactive Inorganic Materials for Bone Regeneration and Drug Delivery

Volumn , Issue , 2013, Pages 83-116

  Luo, Yongxiang ^a,b   Lode, Anja ^a,b   Wu, Chengtie ^c   Gelinsky, Michael ^a,b  

^a UNIVERSITY HOSPITAL CARL GUSTAV CARUS   (Germany)

^b DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

^c SHANGHAI INSTITUTE OF CERAMICS   (China)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84959481072     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b13926-9     Document Type: Chapter

References (61)

1. Bohner, M. 2000. Calcium orthophosphates in medicine: From ceramics to calcium phosphate cements. Injury 31:37-47.
2. Chun, J. Y., Kang, H. K., Jeong, L., et al. 2010. Epidermal cellular response to poly (vinyl alcohol) nanofibers containing silver nanoparticles. Colloids Surf B Biointerfaces 78:334-42.
3. Constantz, B. R., Ison, I. C., Fulmer, M. T., et al. 1995. Skeletal repair by in situ formation of the mineral phase of bone. Science 267:1796-9.
4. Detsch, R., Uhl, F., Deisinger, U., and Ziegler, G. 2008. 3D-Cultivation of bone marrow stromal cells on hydroxyapatite scaffolds fabricated by dispense-plotting and negative mould technique. J Mater Sci: Mater Med 19:1491-6.
5. Dorozhkin, S.V. 2010. Bioceramics of calcium orthophosphates. Biomaterials 31:1465-85.
6. Erisken, C., Kalyon, D., Wang, H., Örnek-Balance, C., and Xu, J. 2011. Osteochondral tissue formation through adipose-derived stromal cell differentiation on biomimetic polycaprolactone nanofibrous scaffolds with graded insulin and beta-glycerophosphate concentrations. Tissue Eng A 17:1239-52.
7. Espanol, M., Perez, R. A., Montufar, E. B., Marichal, C., Sacco, A., and Ginebra, M. P. 2009. Intrinsic porosity of calcium phosphate cements and its significance for drug delivery and tissue engineering applications. Acta Biomater 5:2752-62.
8. Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., and Dhert, W. J. A. 2008. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. Tissue Eng Part A 14:127-33.
9. Fernandez, E., Ginebra, M. P., Bermodez, O., Boltong, M. G., Driessens, F. C. M., and Planell, J. A. 1995. Dimensional and thermal behaviour of calcium phosphate cements during setting compared to PMMA bone cements. J Mater Sci Lett 14:4-5.
10. Franco, J., Hunger, P., Launey, M. E., Tomsia, A. P., and Saiz, E. 2010. Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel. Acta Biomater 6:218-28.
11. Gelinsky, M. 2009. Mineralised collagen as biomaterial and matrix for bone tissue engineering. In U. Meyer, T. Meyer, J. Handschel, and H. P. Wiesmann (eds.), Fundamentals of Tissue Engineering and Regenerative Medicine, 485-493. Springer, Heidelberg and Berlin.
12. Gelinsky, M., and Heinemann, S. 2010. Nanocomposites for tissue engineering. In C. Kumar (ed.), Nanocomposites for Life Sciences, Chapter 11, 405-34. Wiley-VCH, Weinheim.
13. Gelinsky, M., Lode, A., Bernhardt, A., and Rösen-Wolff, A. 2011. Stem cell engineering for regeneration of bone tissue. In G. M. Artmann, J. Hescheler, and S. Minger (eds.), Stem Cell Engineering, Part 3, 383-99. Springer, Heidelberg and Berlin.
14. Guo, H., Su, J., Wei, J., Kong, H., and Liu, C. 2009. Biocompatibility and osteogenicity of degradable Ca-deficient hydroxyapatite scaffolds from calcium phosphate cement for bone tissue engineering. Acta Biomater 5:268-78.
15. Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., and Tan, K. C. 2001. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. J Biomed Mater Res 55:203-16.
16. Hutmacher, D. W., Sittinger, M., and Risbud, M. V. 2004. Scaffold-based tissue engineering: Rationale for computer-aided design and solid free-form fabrication systems. Trends Biotechnol 22:354-62.
17. Jansen, J. A., de Ruijter, J. E., Schaeken, H. G., van der Waerden, J. P. C. M., Planell, J. A., and Driessens, F. C. M. 1995. Evaluation of tricalcium-phosphate/hydroxyapatite cement for tooth replacement: An experimental animal study. J Mater Sci Mater Med 6:653-7.
18. Jones, A. C., Arns, C. H., Hutmacher, D. W., Milthorpe, B. K., Sheppard, A. P., and Knackstedt, M. A. 2009. The correlation of pore morphology, interconnectivity and physical properties of 3D ceramics scaffolds with bone ingrowth. Biomaterials 30:1440-51.
19. Kalita, S. J., Bose, S., Hosick, H. L., and Bandyopadhyay, A. 2003. Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling. Mater Sci Eng C 23:611-620.
20. Karageorgiou, V., and Kaplan, D. 2005. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials 26:5474-91.
21. Keating, J. F., and McQueen, M. M. 2001. Substitutes for autologous bone graft in orthopaedic trauma. J Bone Joint Surg Br 83:3-8.
22. Khairoun, I., Boltong, M. G., Driessens, F. C., and Planell, J. A. 1997. Effect of calcium carbonate on clinical compliance of apatitic calcium phosphate bone cement. J Biomed Mater Res 38:356-60.
23. Khalyfa, A., Vogt, S., Weisser, J., et al. 2007. Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants. J Mater Sci Mater Med 18:909-16.
24. Kim, G. H., and Son, J. G. 2009. 3D polycaprolactone (PCL) scaffold with hierarchical structure fabricated by a piezoelectric transducer (PZT)-assisted bioplotter. Appl Phys A 94:781-5.
25. Landers, R., Hübner, U., Schmelzeisen, R., and Mülhaupt, R. 2002. Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. Biomaterials 23:4437-47.
26. Leong, K. F., Chua, C. K., Sudarmadji, N., and Yeong, W. Y. 2008. Engineering functionally graded tissue engineering scaffolds. J Mech Behav Biomed Mater 1:140-52.
27. Lode, A., Meissner, K., Luo, Y., et al. Forthcoming. Fabrication of porous scaffolds by three-dimensional plotting of a pasty calcium phosphate bone cement under mild conditions. J Tissue Eng Regen Med. DOI 10.1002/term.1563.
28. López-Noriega, A., Arcos, D., Izquierdo-Barba, I., Sakamoto, Y., Terasaki, O., and Vallet-Regí, M. 2006. Ordered mesoporous bioactive glasses for bone tissue regeneration. Chem Mater 18:3137-44.
29. Luo, Y., Lode, A., and Gelinsky, M. Forthcoming. Direct plotting of three-dimensional hollow fiber scaffolds based on concentrated alginate pastes for tissue engineering. Adv Healthcare Mater. DOI 10.1002/adhm.201200303.
30. Luo, Y., Wu, C., Lode, A., and Gelinsky, M. Forthcoming. Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering. Biofabrication. 5:015005.
31. Maher, P. S., Keatch, R. P., Donnelly, K., and Mackay, R. E. 2009. Construction of 3D biological matrices using rapid prototyping technology. Rapid Prototyp J 15:204-10.
32. Martins, A., Chung, S., Pedro, A. J., Sousa, R. A., Marques, A. P., Reis, R. L., and Neves, N. M. 2009. Hierarchical starch-based fibrous scaffold for bone tissue engineering applications. J Tissue Eng Regen Med 3:37-42.
33. Mertz, W. 1981. The essential trace elements. Science 213:1332-8.
34. Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., and Guiberteau, F. 2007. Fracture modes under uniaxial compression in hydroxyapatite scaffolds fabricated by robocasting. J Biomed Mater Res A 83:646-55.
35. Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., and Guiberteau, F. 2008. Mechanical properties of calcium phosphate scaffolds fabricated by robocasting. J Biomed Mater Res A 85:218-27.
36. Miranda, P., Saiz, E., Gryn, K., and Tomsia, A. P. 2006. Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications. Acta Biomater 2:457-66.
37. Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., and Markwald, R. R. 2009. Organ printing: Tissue spheroids as building blocks. Biomaterials 30:2164-74.
38. Murphy, C. M., Haugh, M. G., and O’Brien, F. J. 2010. The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering. Biomaterials 31:461-6.
39. Nemzek, J. A., Arnoczky, S. P., and Swenson, C. L. 1994. Retrovinal transmission by the transplantation of connective-tissue allografts. An experimental study. J Bone Joint Surg Br 76:1036-41.
40. O’Brien, F. J. 2011. Biomaterials and scaffolds for tissue engineering. Mater Today 14:88-95.
41. Oliveira, A. L., Costa, S. A., Sousa, R. A., and Reis, R. L. 2009. Nucleation and growth of biomimetic apatite layers on 3D plotted biodegradable polymeric scaffolds: Effect of static and dynamic coating conditions. Acta Biomat 5:1626-38.
42. Paul, J., Stagstetter, A., Kriner, M., et al. 2009. Donor-site morbidity after osteochondral autologous transplantation for lesions of the talus. J Bone Joint Surg Br 91:1683-8.
43. Pfister, A., Landers, R., Laib, A., Huebner, U., Schmelzeisen, R., and Muelhaupt, R. 2004. Biofunctional rapid prototyping for tissue-engineering applications: 3D bioplotting versus 3D printing. J Polym Sci Part A: Polym Chem 42:624-38.
44. Pietak, A. M., Reid, J. W., Stott, M. J., and Sayer, M. 2007. Silicon substitution in the calcium phosphate bioceramics. Biomaterials 28:4023-32.
45. Sachs, E., Cima, M., Cornie, J., et al. 1993. Three-dimensional printing: The physics and implications of additive manufacturing. CIRP Ann Manufac Technol 42:257-60.
46. Schroeder, J. E., and Mosheiff, R. 2011. Tissue engineering approaches for bone repair: Concepts and evidence. Injury 42:609-13.
47. Seitz, H., Rieder, W., Irsen, S., Leukers, B., and Tille, C. 2005. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. J Biomed Mater Res B 74:782-8.
48. Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., and Reis, R. L. 2011. Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency. Acta Biomater 7:1009-18.
49. Srouji, S., Kizhner, T., Suss-Tobi, E., Livne, E., and Zussman, E. 2008. 3-D Nanofibrous electrospun multilayered construct is an alternative ECM mimicking scaffold. J Mater Sci: Mater Med 19:1249-55.
50. Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y., and Kuboki, Y. 1997. Pore size of porous hydroxyapatite as the cell-substratum controls BMP-induced osteogenesis. J Biochem 121:317-24.
51. Wu, C., Fan, W., Zhou, Y., et al. 2012. 3D-Printing of highly uniform β-CaSiO3 ceramic scaffolds: Preparation, characterization and in vivo osteogenesis. J Mater Chem 22:12288-95.
52. Wu, C., Luo, Y., Cuniberti, G., Xiao, Y., and Gelinsky, M. 2011. Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. Acta Biomater 7:2644-50.
53. Wu, C., Ramaswamy, Y., Boughton, P., and Zreiqat, H. 2008. Improvement of mechanical and biological properties of porous CaSiO3 scaffolds by poly(D, L-lactic acid) modification. Acta Biomater 4:343-53.
54. Wu, C., Zhang, Y., Zhu, Y., Friis, T., and Xiao, Y. 2010. Structure-property relationships of silk-modified mesoporous bioglass scaffolds. Biomaterials 31:3429-38.
55. Xia, W., and Chang, J. 2006. Well-ordered mesoporous bioactive glasses (MBG): A promising bioactive drug delivery system. J Control Release 110:522-30.
56. Xu, H. K., Weir, M. D., Burguera, E. F., and Fraser, A. M. 2006. Injectable and macroporous calcium phosphate cement scaffold. Biomaterials 27: 4279-87.
57. Xu, S., Li, K., Wang, Z., et al. 2008. Reconstruction of calvarial defect of rabbits using porous calcium silicate bioactive ceramics. Biomaterials 29:2588-96.
58. Yang, S., Leong, K., Du, Z., and Chua, C. 2002. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng 8:1-11.
59. Yuan, H., Yang, Z., Li, Y., and Zhang, X. 1998. Osteoinduction by calcium phosphate biomaterials. J Mater Sci: Mater Med 9:723-6.
60. Zein, I., Hutmacher, D. W., Tan, K. C., and Teoh, S. H. 2002. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 23:1169-85.
61. Zhang, Y., and Zhang, M. 2002. Three-dimensional macroporous calcium phosphate bioceramics with nested chitosan sponges for load-bearing bone implants. J Biomed Mater Res 61:1-8.