The role of shell/core saturation level on the accuracy and mechanical characteristics of porous calcium phosphate models produced by 3Dprinting

Rapid Prototyping Journal

Volumn 21, Issue 1, 2015, Pages 43-55

  Castilho, Miguel ^a   Gouveia, Barbara ^a   Pires, Inês ^a   Rodrigues, Jorge ^a   Pereira, Manuel ^b  

^a Instituto Superior Tecnico Institute for Mechanical Engineering   (Portugal)

^b INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

Advanced manufacturing technologies; Ceramics; Mechanical properties; Porous materials; Printing; Scaffolds

Indexed keywords

3D PRINTERS; BINDERS; BONE; CALCIUM; COMPRESSIVE STRENGTH; COMPUTERIZED TOMOGRAPHY; MATERIALS PROPERTIES; MECHANICAL PROPERTIES; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; POROSITY; POROUS MATERIALS; PRINTING; SCAFFOLDS; SCAFFOLDS (BIOLOGY); SCANNING ELECTRON MICROSCOPY; TISSUE ENGINEERING; WEIBULL DISTRIBUTION; X RAY DIFFRACTION;

ADVANCED MANUFACTURING TECHNOLOGIES; CERAMICS; DESIGN/METHODOLOGY/APPROACH; MECHANICAL CHARACTERISATION; MICRO COMPUTER TOMOGRAPHIES; PARTICLE SIZE AND MORPHOLOGIES; THREE-DIMENSIONAL PRINTING (3DP); UNIAXIAL COMPRESSIVE TESTS;

CALCIUM PHOSPHATE;

EID: 84921414197     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/RPJ-02-2013-0015     Document Type: Article

References (45)

1. Balshin, M.Y. (1949), "Relations on the mechanical properties of powder metals and their porosity and the ultimate properties of porous metal ceramic materials", Dokladay Akademi Science USSR, Vol. 67 No. 5, pp. 831-834.
2. Bian, W., Li, D., Lian, Q., Li, X., Zhang, W., Wang, K. and Jin, Z. (2012), "Fabrication of a bio-inspired beta-tricalcium phosphate/collagen scaffold based on ceramic stereolithography and gel casting for osteochondral tissue engineering", Rapid Prototyping Journal, Vol. 18 No. 1, pp. 68-80.
3. Butscher, A., Bohner, M., Hofmann, S., Gauckler, L. and Müller, R. (2011), "Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing", Acta Biomaterialia, Vol. 7 No. 3, pp. 907-920.
4. Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rohr, P.R. and Muller, R. (2012), "Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds", Acta Biomaterialia, Vol. 8 No. 1, pp. 373-385.
5. Carter, C.B. and Norton, M.G. (2007), Ceramic Materials Science and Engineering, Springer, New York, NY.
6. Castilho, M., Pires, I., Gouveia, B. and Rodrigues, J. (2011), "Structural evaluation of scaffolds prototypes produced by three-dimensional printing", International Journal of Advanced Manufacturing Technology, Vol. 56 Nos 5/6/7/8, pp. 5-8.
7. Castilho, M., Pires, I., Gouveia, B., Rodrigues, J. and Fernandes, P. (2012), "Development and characterization of porous calcium phosphate structures, by 3D Printing", Proceeding of ESB2012: 18th Congress of the European Society of Biomechanics, Vol. 45 p. S1.
8. Chumnanklang, R., Panyathanmaporn, T., Sitthiseripratip, K. and Suwanprateeb, J. (2007), "3D printing of hydroxyapatite: effect of binder concentration in pre-coated particle on part strength", Materials Science and Engineering C, Vol. 27 No. 4, pp. 914-921.
9. Doernberg, M.C., Rechenberg, B., Bohner, M., Grunenfelder, S., Lenthe, G.H., Muller, R., Gasser, B., Mathys, R., Baroud, G. and Auer, J. (2006), "In vivo behavior of calcium phosphate scaffolds with four different pore sizes", Biomaterials, Vol. 27 No. 30, pp. 5186-5198.
10. Dorozhkin, S.V. (2007), "Calcium orthophosphates", Journal of Material Science, Vol. 42, pp. 1061-1095.
11. Gatto, M. and Harris, R.A. (2011), "Non-destructive analysis (NDA) of external and internal structures in 3DP", Rapid Prototyping Journal, Vol. 17 No. 2, pp. 128-137.
12. Gbureck, U., Holzel, T., Biermann, I., Barralet, J.E. and Grover, L.M. (2008), "Preparation of tricalcium phosphate structures via rapid prototyping", Journal of Material Science: Materials in Medicine, Vol. 19 No. 4, pp. 1559-1563.
13. Hasselman, D.P.H. (1963), "Relation between effects of porosity on strength and on young's modulus of elasticity of polycrystalline materials", Journal of American Ceramic Society, Vol. 46, pp. 564-565.
14. Hench, L.L. and Wilson, J. (1993), Introduction to Bioceramics, World Scientific Publishing.
15. Hutmacher, D.W. (2001), "Scaffold design and fabrication technologies for engineering tissues - state of the art and future perspectives", Journal of Biomaterials Science, Polymer Edition, Vol. 12 No. 1, pp. 107-124.
16. Jones, A.C., Arns, C.H., Hutmacher, D.W., Milthorpe, B.K., Sheppard, A.P. and Knackstedt, M.A. (2009), "The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth", Biomaterials, Vol. 30 No. 7, pp. 1440-1451.
17. Jones, J.R., Poologasundarampillai, G., Atwood, R.C., Bernard, D. and Lee, P.D. (2007), "Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds", Biomaterials, Vol. 28 No. 7, pp. 1404-1413.
18. Langer, R. and Vacanti, J.P. (1993), "Tissue engineering", Science, Vol. 260 No. 5110, pp. 920-926.
19. Lee, M.W., Kurniawati, H.T., Chandrasekaran, M. and Cheang, P. (2006), "3D printing of tricalcium phosphate scaffolds", SIM Tech Technical Reports, Vol. 7 No. 2.
20. Leong, K.F., Chua, C.K., Sudarmadji, N. and Yeong, W.Y. (2008), "Engineering functionally graded tissue engineering scaffolds", Journal of The Mechanical Behavior of Biomedical Materials, Vol. 1, pp. 140-152.
21. Lowmunkong, R., Sohmura, T., Suzuki, Y., Matsuya, S. and Ishikawa, K. (2009), "Fabrication of freeform bone-filling calcium phosphate ceramics by gypsum 3D printing method", Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 90B, pp. 531-539.
22. Lutterotti, L., Bortolotti, M., Ischia, G., Lonardelli, I. and Wenk, H.R. (2007), "Rietveld texture analysis from diffraction images", Zeitschrift für Kristallographie, No. 26, pp. 125-130.
23. Marchelli, G., Prabhakar, R., Storti, D. and Ganter, M. (2011), "The guide to glass 3D printing: developments, methods, diagnostics and results", Rapid Prototyping Journal, Vol. 17 No. 3, pp. 187-194.
24. Orlovski, V.P., Komlev, V.S. and Barinov, S.M. (2002), "Hydroxyapatite and hydroxyapatite based ceramics", Inorganic Materials, Vol. 38 No. 10, pp. 973-984.
25. Otsu, N. (1979), "Threshold selection method from gray level histograms", IEEE Transaction on System, Man and Cybernetics SMC, Vol. 9 No. 1, pp. 62-66.
26. Otsukia, B., Takemotoa, M., Fujibayashia, S., Neoa, M., Kokubo, T. and Nakamura, T. (2006), "Pore throat size and connectivity determine bone and tissue in growth into porous implants: three-dimensional micro-CT based structural analyses of porous bioactive titanium implants", Biomaterials, Vol. 27, pp. 5892-5900.
27. Park, J. (2008), Bioceramics Properties, Characterizations, and Applications, Springer, New York, NY.
28. Peters, F., Groisman, D., Davids, R., Hänel, Th., Dürr, H. and Klein, M. (2006), "Comparative study of individual implants from β-tricalcium phosphate made by different techniques based on CT data", Mat.-wiss. U. Werkstofftech, Vol. 37 No. 6.
29. Phani, K.K. and Niyogi, S.K. (1987), "Young's modulus of porous brittle solids", Journal of Material Science, Vol. 22 No. 1, pp. 257-263.
30. Rice, R.W. (2005), "Use of normalized porosity in models for the porosity dependence of mechanical properties", Journal of Material Science, Vol. 40, pp. 983-989.
31. Ryu, H.S., Youn, H.J., Hong, K.S., Chang, B.S., Lee, C.K. and Chung, S.S. (2002), "An improvement in sintering property of β-tricalcium phosphate by addition of calcium pyrophosphate", Biomaterials, Vol. 23 No. 3, pp. 909-914.
32. Sachs, E.M., Haggerty, J.S., Cima, M.J. and Williams, P.A. (1993), "Three-dimensional printing techniques", US Patent No. 5,204,055, US Patent and Trademark Office, Washington, DC.
33. Sachs, E.M., Cima, M.J., Caradonna, M.A., Grau, J., Serdy, J.G., Saxton, P.C., Uhland, S.A. and Moon, J. (2003), "Jetting layers of powder and the formation of fine powder beds hereby", US Patent No. 6,596,224, US Patent and Trademark Office, Washington DC.
34. Schiller, K.K. (1958), "Porosity and strength of brittle solids (with particular reference to gypsum)", Mechanical Properties of Non-Metallic Brittle Materials, Inter Science, New York, NY.
35. Seitz, H., Deisinger, U., Leukers, B., Detsch, R. and Ziegler, G. (2009), "Different calcium phosphate granules for 3D printing of bone tissue engineering scaffolds", Advanced Engineering Materials, Vol. 11 No. 5.
36. Shanjani, Y., Amritha De Croos, J.N., Pilliar, R.M., Kandel, R.A. and Toyserkani, E. (2010), "Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes", Journal of Biomedical Materials Research B: Applied Biomaterials, Vol. 93B No. 2.
37. Shanjani, Y., Hu, Y., Pilliar, R.M. and Toyserkani, E. (2011), "Mechanical characteristics of solid-freeform-fabricated porous calcium polyphosphate structures with oriented stacked layers", Acta Biomaterialia, Vol. 7 No. 4, pp. 1788-1796.
38. Suwanprateeb, J., Sanngam, R. and Panyathanmaporn, T. (2010), "Influence of raw powder preparation routes of hydroxyapatite fabricated by 3D printing technique", Materials Science and Engineering C, Vol. 30, pp. 610-617.
39. Szucs, T.D. and Brabazon, D. (2009), "Effect of saturation and post processing on 3D printed calcium phosphate scaffolds", Key Engineering Materials, Vols 396/397/398, pp. 663-666.
40. Utela, B., Storti, D., Anderson, R. and Ganter, M. (2008), "A review of process development steps for new material systems in three dimensional printing (3DP)", Journal of Manufacturing Processes, Vol. 10 No. 2, pp. 96-104.
41. Vaezi, M. and Chua, C.K. (2011), "Effects of layer thickness and binder saturation level parameters on 3D printing process", The International Journal of Advanced Manufacturing Technology, Vol. 53, pp. 275-284.
42. Vorndran, E., Klarner, M., Klammert, U., Grover, L.M., Patel, S., Barralet, J.E. and Gbureck, U. (2008), "3D Printing of β-tricalcium phosphate ceramics using different strategies", Advanced Engineering Materials, Vol. 10 No. 12.
43. Weibull, W. (1951), "A statistical distribution function of wide applicability", Journal of Applied Mechanics: Transactions ASME, Vol. 18 No. 3, pp. 293-297.
44. Yao, A.W.L. and Tseng, Y.C. (2002), "A robust process optimization for a powder type rapid prototype", Rapid Prototyping Journal, Vol. 8 No. 3, pp. 180-189.
45. TM 510 Hardware Manual, Copyright © by Z Corporation.