Bone regeneration by the osteoconductivity of porous titanium implants manufactured by selective laser melting: A histological and micro computed tomography study in the rabbit

Tissue Engineering - Part A

Volumn 19, Issue 23-24, 2013, Pages 2645-2654

  De Wild, Michael ^a   Schumacher, Ralf ^a   Mayer, Kyrill ^a   Schkommodau, Erik ^a   Thoma, Daniel ^b   Bredell, Marius ^c   Kruse Gujer, Astrid ^c   Grätz, Klaus W ^c   Weber, Franz E ^b,c  

^a UNIVERSITY OF APPLIED SCIENCES AND ARTS NORTHWESTERN SWITZERLAND   (Switzerland)

^b UNIVERSITY OF ZURICH   (Switzerland)

^c UNIVERSITY HOSPITAL ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMATERIALS; BIOMECHANICS; COMPUTERIZED TOMOGRAPHY; DESIGN; MECHANICAL PROPERTIES; TISSUE ENGINEERING; TITANIUM;

BONE TISSUE ENGINEERING; CRANIO-MAXILLOFACIAL SURGERY; HISTOMORPHOMETRIC ANALYSIS; MANDIBULAR RECONSTRUCTION; MICROCOMPUTED TOMOGRAPHY; POROUS TITANIUM IMPLANTS; SELECTIVE LASER MELTING; TITANIUM-BASED IMPLANTS;

BONE;

TITANIUM;

ANIMAL CELL; ANIMAL EXPERIMENT; ANIMAL TISSUE; ARTICLE; BONE CONDUCTION; BONE DEFECT; BONE IMPLANT; BONE PROSTHESIS; BONE REGENERATION; BONE TISSUE; CELL TRANSPLANTATION; CONTROLLED STUDY; FRACTURE HEALING; GEOMETRY; HISTOLOGY; HYDROGEL; IN VIVO STUDY; LASER; MELTING POINT; MICRO-COMPUTED TOMOGRAPHY; MORPHOMETRICS; NONHUMAN; OSSIFICATION; PRIORITY JOURNAL; RABBIT; SELECTIVE LASER MELTING; TISSUE ENGINEERING;

ANIMALS; BONE REGENERATION; BONE SUBSTITUTES; LASERS; POROSITY; RABBITS; TITANIUM; X-RAY MICROTOMOGRAPHY;

EID: 84889834128     PISSN: 19373341     EISSN: 1937335X     Source Type: Journal    
DOI: 10.1089/ten.tea.2012.0753     Document Type: Article

References (38)

1. St-Pierre, J.P., Gauthier, M., Lefebvre, L.P., and Tabrizian, M. Three-dimensional growth of differentiating MC3T3-E1 preosteoblasts on porous titanium scaffolds. Biomaterials 26, 7319, 2005.
2. Imwinkelried, T. Mechanical properties of open-pore titanium foam. J Biomed Mater Res A 81, 964, 2007.
3. Levine, B.R., Sporer, S., Poggie, R.A., Della Valle, C.J., and Jacobs, J.J. Experimental and clinical performance of porous tantalum in orthopedic surgery. Biomaterials 27, 4671, 2006.
4. Singh, R., Lee, P.D., Lindley, T.C., Kohlhauser, C., Hellmich, C., Bram, M., et al. Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling. Acta Biomater 6, 2342, 2010.
5. Bansiddhi, A., Sargeant, T.D., Stupp, S.I., and Dunand, D.C. Porous NiTi for bone implants: a review. Acta Biomater 4, 773, 2008.
6. Kö rner, C., and Singer, R.F. Processing of metal foams-challenges and opportunities. Adv Eng Mater 2, 159, 2000.
7. Fukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Pattanayak, D.K., et al. Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting. Acta Biomater 7, 2327, 2011.
8. Mullen, L., Stamp, R.C., Fox, P., Jones, E., Ngo, C., and Sutcliffe, C.J. Selective laser melting: a unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures. J Biomed Mater Res B Appl Biomater 92, 178, 2010.
9. Murr, L.E., Quinones, S.A., Gaytan, S.M., Lopez, M.I., Rodela, A., Martinez, E.Y., et al. Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. J Mech Behav Biomed Mater 2, 20, 2009.
10. Warnke, P.H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., et al. Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering. Tissue Eng Part C Methods 15, 115, 2009.
11. Meier, H., and Haberland, C. Fundamental studies on the influence of process parameters on the properties of SLM parts. Materialwissenschaft und Werkstofftechnik 93, 665, 2008.
12. Weber, F.E., Eyrich, G., Gratz, K.W., Maly, F.E., and Sailer, H.F. Slow and continuous application of human recombinant bone morphogenetic protein via biodegradable poly (lactide-co-glycolide) foamspheres. Int J Oral Maxillofac Surg 31, 60, 2002.
13. Li, J.P., de Wijn, J.R., van Blitterswijk, C.A., and de Groot, K. Porous Ti6Al4V scaffolds directly fabricated by 3D fibre deposition technique: effect of nozzle diameter. J Mater Sci Mater Med 16, 1159, 2005.
14. Zhao, G., Zinger, O., Schwartz, Z., Wieland, M., Landolt, D., and Boyan, B.D. Osteoblast-like cells are sensitive to submicron-scale surface structure. Clin Oral Implants Res 17, 258, 2006.
15. Zhao, G., Raines, A.L., Wieland, M., Schwartz, Z., and Boyan, B.D. Requirement for both micron-and submicron scale structure for synergistic responses of osteoblasts to substrate surface energy and topography. Biomaterials 28, 2821, 2007.
16. Schumacher, R., de Wild, M., Fabbri, S., Yildiz, A., and Schkommodau, E. Rapid manufacturing of individual Ti-6AI-4V bone implants. Eur Cell Mater 17, 22, 2009.
17. Marx, R.E. Bone and bone graft healing. Oral Maxillofac Surg Clin North Am 19, 455, 2007.
18. Brunette, D.M., Tengvall, P., and Textor, M. Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Response and Medical Applications. Berlin: Springer, 2001.
19. Ferguson, S.J., Broggini,N.,Wieland, M., deWild, M.,Rupp, F., Geis-Gerstorfer, J., et al. Biomechanical evaluation of the interfacial strength of a chemically modified sandblasted and acidetched titanium surface. J Biomed Mater Res A 78, 291, 2006.
20. Kasemo, B., and Gold, J. Implant surfaces and interface processes. Adv Dent Res 13, 8, 1999.
21. Rupp, F., Scheideler, L., Olshanska, N., de Wild, M., Wieland, M., and Geis-Gerstorfer, J. Enhancing surface free energy and hydrophilicity through chemical modification of microstructured titanium implant surfaces. J Biomed Mater Res A 76, 323, 2006.
22. Schuler, M., Kunzler, T.P., de Wild, M., Sprecher, C.M., Trentin, D., Brunette, D.M., et al. Fabrication of TiO2-coated epoxy replicas with identical dual-type surface topographies used in cell culture assays. J Biomed Mater Res A 88, 12, 2009.
23. Kieswetter, K., Schwartz, Z., Hummert, T.W., Cochran, D.L., Simpson, J., Dean, D.D., et al. Surface roughness modulates the local production of growth factors and cytokines by osteoblast-like MG-63 cells. J Biomed Mater Res 32, 55, 1996.
24. Bornstein, M.M., Lussi, A., Schmid, B., Belser, U.C., and Buser, D. Early loading of nonsubmerged titanium implants with a sandblasted and acid-etched (SLA) surface: 3-year results of a prospective study in partially edentulous patients. Int J Oral Maxillofac Implants 18, 659, 2003.
25. Buser, D., Broggini, N., Wieland, M., Schenk, R.K., Denzer, A.J., Cochran, D.L., et al. Enhanced bone apposition to a chemically modified SLA titanium surface. J Dent Res 83, 529, 2004.
26. de Wild, M., Maier, K., Schneider, M., Tschumi, S., and Schumacher, R., Albrecht, H. Surface modification and invitro investigation of generatively produced implants. BIOmaterialien 11, 157, 2010.
27. Kruse, A., Jung, R.E., Nicholls, F., Zwahlen, R.A., Hammerle, C.H., and Weber, F.E. Bone regeneration in the presence of a synthetic hydroxyapatite/silica oxide-based and a xenogenic hydroxyapatite-based bone substitute material. Clin Oral Implants Res 22, 506, 2011.
28. Schmidlin, P.R., Tchouboukov, A., Wegehaupt, F.J., and Weber, F.E. Effect of cerium chloride application on fibroblast and osteoblast proliferation and differentiation. Arch Oral Biol 57, 892, 2012.
29. Bobyn, J.D., Stackpool, G.J., Hacking, S.A., Tanzer, M., and Krygier, J.J. Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial. J Bone Joint Surg Br 81B, 907, 1999.
30. Jensen, S.S., Yeo, A., Dard, M., Hunziker, E., Schenk, R., and Buser, D. Evaluation of a novel biphasic calcium phosphate in standardized bone defects: a histologic and histomorphometric study in the mandibles of minipigs. Clin Oral Implants Res 18, 752, 2007.
31. Malmstrom, J., Adolfsson, E., Arvidsson, A., and Thomsen, P. Bone response inside free-form fabricated macroporous hydroxyapatite scaffolds with and without an open microporosity. Clin Implant Dent Relat Res 9, 79, 2007.
32. Wintermantel, E., and Ha, S.-W. Medizintechnik-Life Science Engineering. Berlin, Heidelberg: Springer-Verlag, 2009.
33. Schneider, O.D., Weber, F., Brunner, T.J., Loher, S., Ehrbar, M., Schmidlin, P.R., et al. In vivo and in vitro evaluation of flexible, cottonwool-like nanocomposites as bone substitute material for complex defects. Acta Biomater 5, 1775, 2009.
34. Schmidlin, P.R., Nicholls, F., Kruse, A., Zwahlen, R.A., and Weber, F.E. Evaluation of moldable, in situ hardening calcium phosphate bone graft substitutes. Clin Oral Implants Res 24, 149, 2013.
35. Wennerberg, A., and Albrektsson, T. Effects of titanium surface topography on bone integration: a systematic review. Clin Oral Implants Res 20 Suppl 4, 172, 2009.
36. Wennerberg, A., and Albrektsson, T. On implant surfaces: a review of current knowledge and opinions. Int J Oral Maxillofac Implants 25, 63, 2010.
37. Thomsen, P., Malmstrom, J., Emanuelsson, L., Rene, M., and Snis, A. Electron beam-melted, free-form-fabricated titanium alloy implants: Material surface characterization and early bone response in rabbits. J Biomed Mater Res B Appl Biomater 90, 35, 2009.
38. Pattanayak, D.K., Fukuda, A., Matsushita, T., Takemoto, M., Fujibayashi, S., Sasaki, K., et al. Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments. Acta Biomater 7, 1398, 2011.