Tribocorrosion behavior of veneering biomedical PEEK to Ti6Al4V structures

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 54, Issue , 2016, Pages 123-130

  Sampaio, Miguel ^a   Buciumeanu, Mihaela ^b   Henriques, Bruno ^a   Silva, Filipe S ^a   Souza, Júlio C M ^a,c   Gomes, José R ^a  

^a UNIVERSITY OF MINHO   (Portugal)

^b DUNAREA DE JOS UNIVERSITY OF GALATI   (Romania)

^c FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

Author keywords

Biotribology; PEEK; Sliding wear; Ti6Al4V; Tribocorrosion

Indexed keywords

BIOCOMPATIBILITY; CORROSION; ETHERS; FRICTION; HOT PRESSING; KETONES; POLYETHER ETHER KETONES; PROSTHETICS; SCANNING ELECTRON MICROSCOPY; VENEERS; WEAR OF MATERIALS; WEAR RESISTANCE;

BIOTRIBOLOGY; COEFFICIENT OF FRICTIONS; OPEN CIRCUIT POTENTIAL; SLIDING WEAR; SURROUNDING ENVIRONMENT; TI-6AL-4V; TRIBO-CORROSION; TRIBOCORROSION BEHAVIOR;

STAINLESS STEEL;

ALUMINUM OXIDE; METAL ION; POLYETHERETHERKETONE; TITANIUM; BIOMATERIAL; KETONE; MACROGOL DERIVATIVE; TITANIUM ALLOY (TIAL6V4);

ARTICLE; BIOCOMPATIBILITY; BIOMECHANICS; CHEMICAL STRUCTURE; COEFFICIENT OF FRICTION; CONTROLLED STUDY; CORROSION; DENTAL VENEER; FRICTION; HYBRID; INTEGRATED CIRCUIT; LOAD CARRYING CAPACITY; MOUTH CAVITY; OPEN CIRCUIT POTENTIAL; POLYMERIZATION; PRIORITY JOURNAL; SALIVA; SCANNING ELECTRON MICROSCOPY; SYNTHESIS; TRIBOCORROSION; CHEMISTRY; SURFACE PROPERTY;

BIOCOMPATIBLE MATERIALS; CORROSION; KETONES; POLYETHYLENE GLYCOLS; SURFACE PROPERTIES; TITANIUM;

EID: 84943538492     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2015.09.010     Document Type: Article

References (37)

1. Chen J., Zhang Q., Li Q., Fu S., Wang J. Corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys in artificial seawater. Trans. Nonferr. Met. Soc. China 2014, 24(4):1022-1031.
2. Case C.P., Langkamer V.G., James C., Palmer M.R., Kemp A.J., Heap P.F., Solomon L. Widespread dissemination of metal debris from implants. J. Bone Joint Surg. Br. 1994, 76:701-712.
3. Doni Z., Alves A.C., Toptan F., Gomes J.R., Ramalho A., Buciumeanu M., Palaghian L., Silva F.S. Dry sliding and tribocorrosion behaviour of hot pressed CoCrMo biomedical alloy as compared with the cast CoCrMo and Ti6Al4V alloys. Mater. Des. 2013, 52:47-57.
4. De Gee A.J., Pallav P. Occlusal wear simulation with the ACTA wear machine. J. Dent. 1994, 22:S21-S27.
5. Friedrich K., Sue H.J., Liu P., Almajid A.A Scratch resistance of high performance polymers. Tribol. Int. 2011, 44(9):1032-1046.
6. Ganesh B.K.C., Ramanaih N., Chandrasekhar Rao P.V. Dry sliding wear behavior of Ti-6Al-4V implant alloy subjected to various surface treatments. Trans. Indian Inst. Met. 2012, 65(5):425-434.
7. Guleryuz, H., Cimenoglu, H., 2004. A study to improve tribological performance of Ti-6Al-4V alloy for biomedical applications. Medical Device Materials. Proceedings of the Materials & Processes for Medical Devices Conference. pp. 357-361.
8. Goodman S.B. Wear particles, periprosthetic osteolysis and the immune system. Biomaterials 2007, 28:5044-5048.
9. Han C.-M., Lee E.-J., Kim H.-E., Koh Y.-H., Kim K.N., Ha Y., Kuh S.-U. The electron beam deposition of titanium on polyetheretherketone (PEEK) and the resulting enhanced biological properties. Biomaterials 2010, 31(13):3465-3470.
10. Hallab N.J., Jacobs J.J., Skipor A., Black J., Mikecz K., Galante J.O. Systemic metal-protein binding associated with total joint replacement arthroplasty. J. Biomed. Mater. Res. 2000, 49:353-361.
11. Kern M., Lehmann F. Influence of surface conditioning on bonding to polyetheretherketon (PEEK). Dent. Mater. 2012, 28(12):1280-1283.
12. Kurtz S.M., Devine J.N. PEEK biomaterials in trauma, orthopedic, and spinal implants. Biomaterials 2007, 28(32):4845-4869.
13. 2 environment and its effect on the PEEK/copper. Langmuir 2004, (10):157-163.
14. Kumazawa R., Watari F., Takashi N., Tanimura Y., Uo M., Totsuka Y. Effects of Ti ions and particles on neutrophil function and morphology. Biomaterials 2002, 23:3757-3764.
15. Licausi M.P., Igual Muñoz A., Amigó Borrás V. Influence of the fabrication process and fluoride content on the tribocorrosion behaviour of Ti6Al4V biomedical alloy in artificial saliva. J. Mech. Behav. Biomed. Mater. 2013, 20:137-148.
16. Li J., Liao H., Coddet C. Friction and wear behavior of flame-sprayed PEEK coatings. Wear 2002, 252(9-10):824-831.
17. Lee W.-T., Koak J.-Y., Lim Y.-J., Kim S.-K., Kwon H.-B., Kim M.-J. Stress shielding and fatigue limits of poly-ether-ether-ketone dental implants. J. Biomed. Mater. Res. Part B Appl. Biomater. 2012, 100(4):1044-1052.
18. Landolt D. Electrochemical and materials aspects of tribocorrosion systems. J. Phys. D. Appl. Phys. 2006, 39(15):3121-3127.
19. Leung V.W.H., Darvell B.W. Artificial saliva for in vitro studies of dental materials. J. Dent. 1997, 25:475-484.
20. Mischler S. Triboelectrochemical techniques and interpretation methods in tribocorrosion: a comparative evaluation. Tribol. Int. 2008, 41(7):573-583.
21. Maloney W.J., Smith R.L., Castro F., Schurman D. Fibroblast response to metallic debris in vitro. J. Bone Joint Surg. Am. 1993, 75:835-844.
22. Niinomi M. Mechanical properties of biomedical titanium alloys. Mater. Sci. Eng. A 1998, 243(1-2):231-236.
23. Ourahmoune, R., Salvia, M., 2011. Effect of sandblasting substrate treatment on single lap shear strength of adhesively bonded PEEK and its composites. In: Proceedings of the18th International Conference on Composite Materials. pp. 2-7.
24. Ozakaki Y. A New Ti-15Zr-4Nb-4Ta alloy for medical applications. Curr. Opin. Solid State Mater. Sci. 2001, 5:45-53.
25. Ponthiaux P., Wenger F., Drees D., Celis J.P. Electrochemical techniques for studying tribocorrosion processes. Wear 2004, 256(5):459-468.
26. Runa M.J., Mathew M.T., Rocha L.a Tribocorrosion response of the Ti6Al4V alloys commonly used in femoral stems. Tribol. Int. 2013, 68:85-93.
27. Souza J.C.M., Barbosa S.L., Ariza E., Celis J.-P., Rocha L.A. Simultaneous degradation by corrosion and wear of titanium in artificial saliva containing fluorides. Wear 2012, 292-293:82-88.
28. Souza J.C.M., Henriques M., Teughels W., Ponthiaux P., Celis J.-P., Rocha L.A. Wear and corrosion interactions on titanium in oral environment: literature review. J. Bio- Tribo-Corros. 2015, 1(2):13.
29. Schwitalla A., Müller W.-D. PEEK dental implants: a review of the literature. J. Oral Implantol. 2013, 39(6):743-749.
30. Sumer M., Unal H., Mimaroglu A. Evaluation of tribological behaviour of PEEK and glass fibre reinforced PEEK composite under dry sliding and water lubricated conditions. Wear 2008, 265(7-8):1061-1065.
31. Souza J.C.M., Ponthiaux P., Henriques M., Oliveira R., Teughels W., Celis J.-P., Rocha L.A. Corrosion behaviour of titanium in the presence of Streptococcus mutans. J. Dent. 2013, 41(6):528-534.
32. Sansone V., Pagani D., Melato M. The effects on bone cells of metal ions released from orthopaedic implants. A review. Clin. Cases Miner. Bone Metab. 2013, 10(1):34-40.
33. Schindler H.J., Stengel E., Spiess W.E. Feedback control during mastication of solid food textures-a clinical-experimental study. J. Prosthet. Dent 1998, 80:330-336.
34. Urban R.M., Jacobs J.J., Tomlinson M.J., Gavrilovic J., Black J., Peoc'h M. Dissemination of wear particles to the liver, spleen, and abdominal lymph nodes of patients with hip or knee replacement. J. Bone Joint Surg. Am. 2000, 82:457.
35. Werner P., Altstädt V., Jaskulka R., Jacobs O., Sandler J.K.W., Shaffer M.S.P., Windle A.H. Tribological behaviour of carbon-nanofibre-reinforced poly(ether ether ketone). Wear 2004, 257(9-10):1006-1014.
36. Walsh W.R., Bertollo N., Christou C., Schaffner D., Mobbs R.J. Plasma-sprayed titanium coating to polyetheretherketone improves the bone-implant interface. Spine J. 2014, 15(5):1041-1049.
37. Zhang G., Liao H., Li H., Mateus C., Bordes J.-M., Coddet C. On dry sliding friction and wear behaviour of PEEK and PEEK/SiC-composite coatings. Wear 2006, 260(6):594-600.