Dry sliding and tribocorrosion behaviour of hot pressed CoCrMo biomedical alloy as compared with the cast CoCrMo and Ti6Al4V alloys

Materials and Design

Volumn 52, Issue , 2013, Pages 47-57

  Doni, Z ^a,b   Alves, A C ^a   Toptan, F ^a   Gomes, J R ^a   Ramalho, Amilcar ^c   Buciumeanu, M ^b   Palaghian, L ^b   Silva, F S ^a  

^a UNIVERSITY OF MINHO   (Portugal)

^b DUNAREA DE JOS UNIVERSITY OF GALATI   (Romania)

^c UNIVERSITY OF COIMBRA   (Portugal)

Author keywords

CoCrMo; Dry sliding; Hot pressing; Ti6Al4V; Tribocorrosion

Indexed keywords

AMORPHOUS FILMS; EXPERIMENTS; HOT PRESSING; MATERIALS; POWDER METALLURGY; SCANNING ELECTRON MICROSCOPY; SINTERING; WEAR RESISTANCE; X RAY SPECTROSCOPY;

ALTERNATIVE PROCESSING ROUTES; COCRMO; DRY SLIDING; ENERGY DISPERSIVE X RAY SPECTROSCOPY; FIELD EMISSION GUN SCANNING ELECTRON MICROSCOPE; TI-6AL-4V; TRIBO-CORROSION; TRIBOLOGICAL EXPERIMENTS;

STAINLESS STEEL;

EID: 84878927071     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.05.032     Document Type: Article

References (56)

1. Molinari A., Straffelini G., Tesi B., Bacci T. Dry sliding wear mechanisms of the Ti6Al4V alloy. Wear 1997, 208:105-112.
2. Long M., Rack H.J. Titanium alloys in total joint replacement - a materials science perspective. Biomaterials 1998, 19:1621-1639.
3. Ganesh B.K.C., Ramanaih N. Chandrasekhar Rao P V. dry sliding wear behavior of Ti-6Al-4V implant alloy subjected to various surface treatments. Trans Indian Inst Metals 2012, 65:425-434.
4. Dourandish M., Godlinski D., Simchi A., Firouzdor V. Sintering of biocompatible P/M Co-Cr-Mo alloy (F-75) for fabrication of porosity-graded composite structures. Mater Sci Eng: A 2008, 472:338-346.
5. Niinomi M. Recent metallic materials for biomedical applications. Metall Mater Trans A 2002, 33:477-486.
6. Varano R., Bobyn J.D., Medley J.B., Yue S. Effect of microstructure on the dry sliding friction behavior of CoCrMo alloys used in metal-on-metal hip implants. J Biomed Mater Res. Part B, Appl Biomater 2006, 76:281-286.
7. Thomann U.I., Uggowitzer P.J. Wear-corrosion behavior of biocompatible austenitic stainless steels. Wear 2000, 239:48-58.
8. Marino C.E.B., Mascaro L.H. EIS characterization of a Ti-dental implant in artificial saliva media: dissolution process of the oxide barrier. J Electroanal Chem 2004, 568:115-120.
9. Yan Y., Neville A., Dowson D. Biotribocorrosion - an appraisal of the time dependence of wear and corrosion interactions: I. The role of corrosion. J Phys D: Appl Phys 2006, 39:3200-3205.
10. Landolt D., Mischler S., Stemp M., Barril S. Third body effects and material fluxes in tribocorrosion systems involving a sliding contact. Wear 2004, 256:517-524.
11. Sargeant A., Goswami T. Hip implants - Paper VI - ion concentrations. Mater Des 2007, 28:155-171.
12. Borgioli F., Galvanetto E., Iozzelli F., Pradelli G. Improvement of wear resistance of Ti-6Al-4V alloy by means of thermal oxidation. Mater Lett 2005, 59:2159-2162.
13. Ming Q., Yong-zhen Z., Jian-heng Y., Jun Z. Microstructure and tribological characteristics of Ti-6Al-4V alloy against GCr15 under high speed and dry sliding. Mater Sci Eng: A 2006, 434:71-75.
14. Alam M.O., Haseeb A.S.M.A. Response of Ti-6Al-4V and Ti-24Al-11Nb alloys to dry sliding wear against hardened steel. Tribol Int 2002, 35:357-362.
15. Saldívar-García A.J., López H.F. Microstructural effects on the wear resistance of wrought and as-cast Co-Cr-Mo-C implant alloys. J Biomed Mater Res Part A 2005, 74:269-274.
16. Hsu H.-C., Lian S.-S. Wear properties of Co-Cr-Mo-N plasma-melted surgical implant alloys. J Mater Process Technol 2003, 138:231-235.
17. Barril S., Mischler S., Landolt D. Electrochemical effects on the fretting corrosion behaviour of Ti6Al4V in 0.9% sodium chloride solution. Wear 2005, 259:282-291.
18. Chen J., Yan F. Tribocorrosion behaviors of Ti-6Al-4V and Monel K500 alloys sliding against 316 stainless steel in artificial seawater. Trans Nonferr Metals Soc China 2012, 22:1356-1365.
19. Martin É., Azzi M., Salishchev G.A., Szpunar J. Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti-6Al-4V. Tribol Int 2010, 43:918-924.
20. Dimah M.K., Devesa Albeza F., Amigó Borrás V., Igual Muñoz A. Study of the biotribocorrosion behaviour of titanium biomedical alloys in simulated body fluids by electrochemical techniques. Wear 2012, 294-295:409-418.
21. Igual Muñoz A., Casabán Julián L. Influence of electrochemical potential on the tribocorrosion behaviour of high carbon CoCrMo biomedical alloy in simulated body fluids by electrochemical impedance spectroscopy. Electrochim Acta 2010, 55:5428-5439.
22. Mathew M.T., Runa M.J., Laurent M., Jacobs J.J., Rocha L.A., Wimmer M.A. Tribocorrosion behavior of CoCrMo alloy for hip prosthesis as a function of loads: a comparison between two testing systems. Wear 2011, 271:1210-1219.
23. Yan Y., Neville A., Dowson D., Williams S. Tribocorrosion in implants-assessing high carbon and low carbon Co-Cr-Mo alloys by in situ electrochemical measurements. Tribol Int 2006, 39:1509-1517.
24. Giacchi J.V., Morando C.N., Fornaro O., Palacio H.A. Microstructural characterization of as-cast biocompatible Co-Cr-Mo alloys. Mater Charact 2011, 62:53-61.
25. Bolzoni L., Ruiz-Navas E.M., Neubauer E., Gordo E. Mechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti-6Al-7Nb alloy. J Mech Beh Biomed Mater 2012, 9:91-99.
26. Henriques B., Soares D., Silva F.S. Microstructure, hardness, corrosion resistance and porcelain shear bond strength comparison between cast and hot pressed CoCrMo alloy for metal-ceramic dental restorations. J Mech Beh Biomed Mater 2012, 12:83-92.
27. Bolzoni L., Meléndez I.M., Ruiz-Navas E.M., Gordo E. Microstructural evolution and mechanical properties of the Ti-6Al-4V alloy produced by vacuum hot-pressing. Mater Sci Eng: A 2012, 546:189-197.
28. Bolzoni L., Ruiz-Navas E.M., Neubauer E., Gordo E. Inductive hot-pressing of titanium and titanium alloy powders. Mater Chem Phys 2012, 131:672-679.
29. Mischler S. Triboelectrochemical techniques and interpretation methods in tribocorrosion: a comparative evaluation. Tribol Int 2008, 41:573-583.
30. Zivic F., Babic M., Vencl A. Continuous control as alternative route for wear monitoring by measuring penetration depth during linear reciprocating sliding of Ti6Al4V alloy. J Alloys Compd 2011, 509:5748-5754.
31. Dong H., Bell T. Tribological behaviour of alumina sliding against Ti6Al4V in unlubricated contact. Wear 1999, 225-229:874-884.
32. Deuis R.L., Subramanian C., Yellup J.M. Dry sliding wear of aluminium composites - a review. Compos Sci Technol 1997, 57:415-435.
33. Toptan F., Kerti I., Rocha L.A. Reciprocal dry sliding wear behaviour of B4Cp reinforced aluminium alloy matrix composites. Wear 2012, 290-291:74-85.
34. Qu J., Blau P.J., Watkins T.R., Cavin O.B., Kulkarni N.S. Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces. Wear 2005, 258:1348-1356.
35. Straffelini G., Molinari A. Dry sliding wear of Ti-6Al-4V alloy as influenced by the counterface and sliding conditions. Wear 1999, 236:328-338.
36. Mu D., Shen B., Zhao X. Effects of boronizing on mechanical and dry-sliding wear properties of CoCrMo alloy. Mater Des 2010, 31:3933-3936.
37. Wimmer M., Loos J., Nassutt R., Heitkemper M., Fischer A. The acting wear mechanisms on metal-on-metal hip joint bearings: in vitro results. Wear 2001, 250:129-139.
38. Kehler B., Baker N., Lee D., Maggiore C., Nastasi M., Tesmer J., et al. Tribological behavior of high-density polyethylene in dry sliding contact with ion-implanted CoCrMo. Surf Coat Technol 1999, 114:19-28.
39. Mcaiieter B.A.J. The Al-Co (aluminum-cobalt) system. J Phase Equilibr 1989, 10:646-650.
40. Lashgari H.R., Zangeneh S., Ketabchi M. Isothermal aging effect on the microstructure and dry sliding wear behavior of Co-28Cr-5Mo-0.3C alloy. J Mater Sci 2011, 46:7262-7274.
41. Manivasagam G., Dhinasekaran D., Rajamanickam A. Biomedical implants : corrosion and its prevention - a review. Recent Pat Corros Sci 2010, 2:40-54.
42. Bettini E., Eriksson T., Boström M., Leygraf C., Pan J. Influence of metal carbides on dissolution behavior of biomedical CoCrMo alloy: SEM, TEM and AFM studies. Electrochim Acta 2011, 56:9413-9419.
43. Diomidis N., Göçkan N., Ponthiaux P., Wenger F., Celis J.-P. Assessment of the surface state behaviour of Al71Cu10Fe9Cr10 and Al3Mg2 complex metallic alloys in sliding contacts. Intermetallics 2009, 17:930-937.
44. Diomidis N., Mischler S., More N.S., Roy M. Tribo-electrochemical characterization of metallic biomaterials for total joint replacement. Acta Biomater 2012, 8:852-859.
45. Zhao W., Liu C., Dong L., Wang Y. Effects of arc spray process parameters on corrosion resistance of Ti coatings. J Therm Spray Technol 2009, 18:702-707.
46. Landolt D., Mischler S., Stemp M. Electrochemical methods in tribocorrosion: a critical appraisal. Electrochim Acta 2001, 46:3913-3929.
47. Contu F., Elsener B., Böhni H. A study of the potentials achieved during mechanical abrasion and the repassivation rate of titanium and Ti6Al4V in inorganic buffer solutions and bovine serum. Electrochim Acta 2004, 50:33-41.
48. Hanawa T., Asami K., Asaoka K. Repassivation of titanium and surface oxide film regenerated in simulated bioliquid. J Biomed Mater Res 1998, 40:530-538.
49. Manhabosco T.M., Tamborim S.M., Dos Santos C.B., Müller I.L. Tribological, electrochemical and tribo-electrochemical characterization of bare and nitrided Ti6Al4V in simulated body fluid solution. Corros Sci 2011, 53:1786-1793.
50. Buford A., Goswami T. Review of wear mechanisms in hip implants : Paper I - General. Mater Des 2004, 25:385-393.
51. Mcgee M.A., Howie D.W., Costi K., Haynes D.R., Wildenauer C.I., Pearcy M.J., et al. Implant retrieval studies of the wear and loosening of prosthetic joints : a review. Wear 2000, 241:158-165.
52. España F.A., Balla V.K., Bose S., Bandyopadhyay A. Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping. Mater Sci Eng: C 2010, 30:50-57.
53. Zangeneh S., Lashgari H.R., Roshani A. Microstructure and tribological characteristics of aged Co-28Cr-5Mo-0.3C alloy. Mater Des 2012, 37:292-303.
54. Jiang J., Stack M.M. Modelling sliding wear: from dry to wet environments. Wear 2006, 261:954-965.
55. Figueiredo-Pina C.G., Neves A.A.M., Neves B.M.B.Das Corrosion-wear evaluation of a UHMWPE/Co-Cr couple in sliding contact under relatively low contact stress in physiological saline solution. Wear 2011, 271:665-670.
56. Pakshir M., Bagheri T., Kazemi M.R. In vitro evaluation of the electrochemical behaviour of stainless steel and Ni-Ti orthodontic archwires at different temperatures. Eur J Orthod 2011, 1-7.