Engineering model-based Bayesian monitoring of ramp-up phase of multistage manufacturing process

International Journal of Production Research

Volumn 53, Issue 15, 2015, Pages 4594-4613

  Du, Shichang ^a   Yao, Xufeng ^b   Huang, Delin ^a  

^a SHANGHAI JIAO TONG UNIVERSITY   (China)

^b University of Illinois at Chicago   (United States)

Author keywords

Bayesian method; engineering model; multistage manufacturing process; parameter estimation; ramp up phase

Indexed keywords

BAYESIAN NETWORKS; PARAMETER ESTIMATION; PROCESS MONITORING; PROFESSIONAL ASPECTS;

BAYESIAN METHODS; ENGINEERING MODELING; LIMITED INFORMATION; MULTISTAGE MANUFACTURING PROCESS; PROCESS PARAMETERS; PRODUCT CHARACTERISTICS; RAMP UP; VARIATION PROPAGATION;

PROCESS CONTROL;

EID: 84932196810     PISSN: 00207543     EISSN: 1366588X     Source Type: Journal    
DOI: 10.1080/00207543.2015.1005247     Document Type: Article

References (51)

1. Abellan-Nebot, J. V., J. Liu, F. R. Subirón, and J. Shi. 2012. "State Space Modeling of Variation Propagation in Multistation Machining Processes Considering Machining-Induced Variations." Journal of Manufacturing Science and Engineering 134 (2): 021002.
2. Anderson, T. 2003. An Introduction to Multivariate Statistical Analysis. 3rd ed. New York: Wiley.
3. Asadzadeh, S., A. Aghaie, and S. F. Yang. 2008. "Monitoring and Diagnosing Multistage Processes: A Review of Cause Selecting Control Charts." Journal of Industrial and Systems Engineering 2 (3): 215-236.
4. Cai, W., S. J. Hu, and J. Yuan. 1997. "A Variational Method of Robust Fixture Configuration Design for 3-D Workpieces." Journal of Manufacturing Science and Engineering 119 (4): 593-602.
5. Camelio, J., S. J. Hu, and D. Ceglarek. 2003. "Modeling Variation Propagation of Multi-Station Assembly Systems with Compliant Parts." Journal of Mechanical Design 125 (4): 673-681.
6. Carrillo, J. E., and R. M. Franza. 2006. "Investing in Product Development and Production Capabilities: The Crucial Linkage Between Time-to-market and Ramp-up Time." European Journal of Operational Research 171: 536-556.
7. Djurdjanovic, D., and J. Ni. 2001. "Linear State Space Modeling of Dimensional Machining Errors." Transactions-North American Manufacturing Research Institution of SME 29: 541-548.
8. Du, S., and J. Lv. 2013. "Minimal Euclidean Distance Chart Based on Support Vector Regression for Monitoring Mean Shifts of Auto-correlated Processes." International Journal of Production Economics 141: 377-387.
9. Du, S., L. Xi, J. Ni, E. Pan, and C. R. Liu. 2008. "Product Lifecycle-oriented Quality and Productivity Improvement Based on Stream of Variation Methodology." Computers in Industry 59 (2-3): 180-192.
10. Du, S., J. Lv, and L. Xi. 2011. "Fault Diagnosis in Assembly Processes Based on Engineering-driven Rules and PSOSAEN Algorithm." Computers & Industrial Engineering 60: 77-88.
11. Du, S., J. Lv, and L. Xi. 2012a. "On-Line Classifying Process Mean Shifts in Multivariate Control Charts Based on Multiclass Support Vector Machines." International Journal of Production Research 50: 6288-6310.
12. Du, S., J. Lv, and L. Xi. 2012b. "A Robust Approach for Root Causes Identification in Machining Processes Using Hybrid Learning Algorithm and Engineering Knowledge." Journal of Intelligent Manufacturing 23: 1833-1847.
13. Du, S., D. Huang, and J. Lv. 2013. "Recognition of Concurrent Control Chart Patterns Using Wavelet Transform Decomposition and Multiclass Support Vector Machines." Computers & Industrial Engineering 66: 683-695.
14. Haller, M., A. Peikert, and J. Thoma. 2003. "Cycle Time Management During Production Ramp-up." Robotics and Computer Integrated Manufacturing 19: 183-188.
15. Hawkins, D. M. 1991. "Multivariate Quality Control Based on Regression-adjusted Variables." Technometrics 33 (1): 61-75.
16. Hawkins, D. 1993. "Regression Adjustment for Variables in Multivariate Quality Control." Journal of Quality Technology 25 (3): 170-182.
17. He, D., and A. Grigoryan. 2005. Multivariate Multiple Sampling Charts. IIE Transactions 37: 509-521.
18. Heredia-Langner, A., D. C. Montgomery, and W. M. Carlyle. 2002. "Solving a Multistage Partial Inspection Problem Using Genetic Algorithms." International Journal of Production Research 40 (8): 1923-1940.
19. Hu, M., Z. Lin, X. Lai, and J. Ni. 2001. "Simulation and Analysis of Assembly Processes Considering Compliant, Non-ideal Parts and Tooling Variations." International Journal of Machine Tools and Manufacture 41 (15): 2233-2243.
20. Huang, W., J. Lin, M. Bezdecny, Z. Kono, and D. Ceglarek. 2007a. "Stream-of-variation Modeling - Part I: A Generic Three-dimensional Variation Model for Rigid-body Assembly in Single Station Assembly Processes." Journal of Manufacturing Science and Engineering 129 (4): 821-831.
21. Huang, W., J. Lin, Z. Kong, and D. Ceglarek. 2007b. "Stream-of-variation (SOVA) Modeling - Part II: A Generic 3D Variation Model for Rigid Body Assembly in Multistation Assembly Processes." Journal of Manufacturing Science and Engineering 129 (4): 832-842.
22. Jiang, H. M., S. H. Li, H. Wu, and X. P. Chen. 2004. "Numerical Simulation and Experimental Verification in the Use of Tailorwelded Blanks in the Multi-stage Stamping Process." Journal of Materials Processing Technology 151 (1-3): 316-320.
23. Jin, J., and J. Shi. 1999. "State Space Modeling of Sheet Metal Assembly for Dimensional Control." Journal of Manufacturing Science and Engineering 121 (4): 756-762.
24. Jin, M., and F. Tsung. 2009. "A Chart Allocation Strategy for Multistage Processes." IIE Transactions 41: 790-803.
25. Koren, Y., U. Heisel, F. Jovane, T. Moriwaki, G. Pritschow, and G. Ulsoy. 1999. "Reconfigurable Manufacturing Systems." CIRP Annals-Manufacturing Technology. 48 (2): 527-540.
26. Loose, J. P., S. Zhou, and D. Ceglarek. 2007. "Kinematic Analysis of Dimensional Variation Propagation for Multistage Machining Processes with General Fixture Layouts." IEEE Transactions on Automation Science and Engineering 4 (2): 141-152.
27. Loose, J. P., Q. Zhou, S. Zhou, and D. Ceglarek. 2009. "Integrating Gd&T into Dimensional Variation Models for Multistage Machining Processes." International Journal of Production Research 48 (11): 3129-3149.
28. Mackertich, N. A. 1990. "Precontrol vs. Control Charting: A Critical Comparison." Quality Engineering 2 (3): 253-260.
29. Mardia, K. V., J. T. Kent, and J. M. Bibby. 1992. Multivariate Analysis. New York: Academic Press.
30. Niaki, S. T. A., and M. Davoodi. 2008. "Designing a Multivariate-Multistage Quality Control System Using Artificial Neural Networks." International Journal of Production Research 47 (1): 251-271.
31. Petersen, K. B., and M. S. Pedersen. 2006. The Matrix Cookbook. Kongens Lyngby: Technical University of Denmark.
32. Ramesh, R., M. A. Mannan, and A. N. Poo. 2000a. "Error Compensation in Machine Tools - A Review." International Journal of Machine Tools and Manufacture 40 (9): 1235-1256.
33. Ramesh, R., M. A. Mannan, and A. N. Poo. 2000b. "Error Compensation in Machine Tools - A Review." International Journal of Machine Tools and Manufacture 40 (9): 1257-1284.
34. Rowe, D. B. 2002. Multivariate Bayesian Statistics. New York: CRC Press.
35. Shamsuzzaman, M., Y. C. Lam, and Z. Wu. 2005. "Control Chart System with Independent Quality Characteristics." The International Journal of Advanced Manufacturing Technology 26: 1298-1305.
36. Shetwan, A. G., V. I. Vitanov, and B. Tjahjono. 2011. "Allocation of Quality Control Stations in Multistage Manufacturing Systems." Computers & Industrial Engineering 60 (4): 473-484.
37. Shi, J. 2006. Stream of Variation Modeling and Analysis for Multistage Manufacturing Processes. New York: CRC Press.
38. Shiau, Y. R. 2002. "Inspection Resource Assignment in a Multistage Manufacturing System with an Inspection Error Model." International Journal of Production Research 40 (8): 1787-1806.
39. Shin, Y. C., and Y. Wei. 1992. "A Statistical Analysis of Positional Errors of a Multiaxis Machine Tool." Precision Engineering 14 (3): 139-146.
40. Shu, L., F. Tsung, and K. C. Kapur. 2004. "Design of Multiple Cause-selecting Charts for Multistage Processes with Model Uncertainty." Quality Engineering 16 (3): 437-450.
41. Shu, L., F. Tsung, and K. L. Tsui. 2005. "Effects of Estimation Errors on Cause-selecting Charts." IIE Transactions 37 (6): 559-567.
42. Shi, J., and S. Zhou. 2009. "Quality Control and Improvement for Multistage Systems: A Survey." IIE Transactions 41 (9): 744-753.
43. Suri, R., K. Otto, and G. Boothroyd. 1999. "Variation Modeling for a Sheet Stretch Forming Manufacturing System." CIRP Annals-Manufacturing Technology 48 (1): 397-400.
44. Terwiesch, C., R. E. Bohn, and K. S. Chea. 2001. "International Product Transfer and Production Ramp-up: A Case Study from the Data Storage Industry." R&D Management 31 (4): 435-451.
45. Tsung, F., Y. Li, and M. Jin. 2008. "Statistical Process Control for Multistage Manufacturing and Service Operations: A Review and Some Extensions." International Journal of Services Operations and Informatics 3 (2): 191-204.
46. Veatch, M. H. 2000. "Inspection Strategies for Multistage Production Systems with Time-varying Quality." International Journal of Production Research 38 (4): 837-853.
47. Xiang, L., and F. Tsung. 2008. "Statistical Monitoring of Multi-stage Processes Based on Engineering Models." IIE Transactions 40 (10): 957-970.
48. Xie, K., L. Wells, J. A. Camelio, and B. D. Youn. 2007. "Variation Propagation Analysis on Compliant Assemblies Considering Contact Interaction." Journal of Manufacturing Science and Engineering 129 (5): 934-942.
49. Zhang, S., and Z. Wu. 2006. "Monitoring the Process Mean and Variance Using a Weighted Loss Function CUSUM Scheme with Variable Sampling Intervals." IIE Transactions 38: 377-387.
50. Zhou, S., Q. Huang, and J. Shi. 2003. "State Space Modeling of Dimensional Variation Propagation in Multistage Machining Process Using Differential Motion Vectors." IEEE Transactions on Robotics and Automation 19 (2): 296-309.
51. Zou, C., F. Tsung, and Y. Liu. 2008. "A Change Point Approach for Phase I Analysis in Multistage Processes." Technometrics 50 (3): 344-356.