Template-guided vs. non-guided drilling in site preparation of dental implants

Clinical Oral Investigations

Volumn 19, Issue 6, 2015, Pages 1339-1346

  Scherer, Uta ^a   Stoetzer, Marcus ^a   Ruecker, Martin ^b   Gellrich, Nils Claudius ^a   von See, Constantin ^a  

^a HANNOVER MEDICAL SCHOOL   (Germany)

^b UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

Bone drill; Diameter measurement; Implant site preparation; Learning curve; Primary stability; Template guided drilling

Indexed keywords

ANIMAL; COMPUTER ASSISTED SURGERY; CONE BEAM COMPUTED TOMOGRAPHY; DIAGNOSTIC IMAGING; IN VITRO STUDY; MANDIBLE; OSSEOINTEGRATION; OSTEOTOMY; PIG; PROCEDURES; SURGERY; TOOTH IMPLANT; TOOTH IMPLANTATION;

ANIMALS; CONE-BEAM COMPUTED TOMOGRAPHY; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL IMPLANTS; IN VITRO TECHNIQUES; MANDIBLE; OSSEOINTEGRATION; OSTEOTOMY; SURGERY, COMPUTER-ASSISTED; SWINE;

EID: 84932195275     PISSN: 14326981     EISSN: 14363771     Source Type: Journal    
DOI: 10.1007/s00784-014-1346-7     Document Type: Article

References (54)

1. Shalabi MM, Gortemaker A, Van’t Hof MA, Jansen JA, Creugers NH (2006) Implant surface roughness and bone healing: a systematic review. J Dent Res 85(6):496–500
2. Albrektsson T, Branemark PI, Hansson HA, Lindstrom J (1981) Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man. Acta OrthopScand 52(2):155–170
3. Atsumi M, Park SH, Wang HL (2007) Methods used to assess implant stability: current status. Int J Oral Maxillofac Implants 22(5):743–754
4. Akca K, Chang TL, Tekdemir I, Fanuscu MI (2006) Biomechanical aspects of initial intraosseous stability and implant design: a quantitative micro-morphometric analysis. Clin Oral Implants Res 17(4):465–472
5. Akkocaoglu M, Uysal S, Tekdemir I, Akca K, Cehreli MC (2005) Implant design and intraosseous stability of immediately placed implants: a human cadaver study. Clin Oral Implants Res 16(2):202–209
6. Brunski JB (1992) Biomechanical factors affecting the bone-dental implant interface. Clin Mater 10(3):153–201
7. Haider R, Watzek G, Plenk H (1993) Effects of drill cooling and bone structure on IMZ implant fixation. Int J Oral Maxillofac Implants 8(1):83–91
8. Weiss CM (1986) Tissue integration of dental endosseous implants: description and comparative analysis of the fibro-osseous integration and osseous integration systems. J Oral Implantol 12(2):169–214
9. Queiroz TP, Souza FA, Okamoto R, Margonar R, Pereira-Filho VA, Garcia Junior IR et al (2008) Evaluation of immediate bone-cell viability and of drill wear after implant osteotomies: immunohistochemistry and scanning electron microscopy analysis. J Oral MaxillofacSurg 66(6):1233–1240
10. Brisman DL (1996) The effect of speed, pressure, and time on bone temperature during the drilling of implant sites. Int J Oral Maxillofac Implants 11(1):35–37
11. Tuijthof GJ, Fruhwirt C, Kment C (2013) Influence of tool geometry on drilling performance of cortical and trabecular bone. Med EngPhys 35(8):1165–1172
12. Ercoli C, Funkenbusch PD, Lee HJ, Moss ME, Graser GN (2004) The influence of drill wear on cutting efficiency and heat production during osteotomy preparation for dental implants: a study of drill durability. Int J Oral Maxillofac Implants 19(3):335–349
13. Karaca F, Aksakal B, Kom M (2011) Influence of orthopaedic drilling parameters on temperature and histopathology of bovine tibia: an in vitro study. Med EngPhys 33(10):1221–1227
14. Wu SW, Lee CC, Fu PY, Lin SC (2012) The effects of flute shape and thread profile on the insertion torque and primary stability of dental implants. Med Eng Phys 34(7):797–805
15. Yerby S, Scott CC, Evans NJ, Messing KL, Carter DR (2001) Effect of cutting flute design on cortical bone screw insertion torque and pullout strength. J Orthop Trauma 15(3):216–221
16. Natali C, Ingle P, Dowell J (1996) Orthopaedic bone drills—can they be improved? Temperature changes near the drilling face. J Bone Joint Surg (Br) 78(3):357–362
17. Markovic A, Calvo-Guirado JL, Lazic Z, Gomez-Moreno G, Calasan D, Guardia J et al (2013) Evaluation of primary stability of self-tapping and non-self-tapping dental implants. A 12-week clinical study. Clin Implant Dent Relat Res 15(3):341–349
18. Cordioli G, Majzoub Z (1997) Heat generation during implant site preparation: an in vitro study. Int J Oral Maxillofac Implants 12(2):186–193
19. Sutter F, Krekeler G, Schwammberger AE, Sutter FJ (1992) A traumatic surgical technique and implant bed preparation. Quintessence Int 23(12):811–816
20. MacAvelia T, Salahi M, Olsen M, Crookshank M, Schemitsch EH, Ghasempoor A et al (2012) Biomechanical measurements of surgical drilling force and torque in human versus artificial femurs. J Biomech Eng 134(12):124503
21. Macavelia T, Ghasempoor A, Janabi-Sharifi F (2012) Force and torque modelling of drilling simulation for orthopaedic surgery. Comput Methods Biomech Biomed Engin
22. Hobkirk JA, Rusiniak K (1977) Investigation of variable factors in drilling bone. J Oral Surg 35(12):968–973
23. Tehemar SH (1999) Factors affecting heat generation during implant site preparation: a review of biologic observations and future considerations. Int J Oral Maxillofac Implants 14(1):127–136
24. Vercruyssen M, Jacobs R, Van Assche N, van Steenberghe D (2008) The use of CT scan based planning for oral rehabilitation by means of implants and its transfer to the surgical field: a critical review on accuracy. J Oral Rehabil 35(6):454–474
25. Van Assche N, Vercruyssen M, Coucke W, Teughels W, Jacobs R, Quirynen M (2012) Accuracy of computer-aided implant placement. Clin Oral Implants Res 23(Suppl 6):112–123
26. Koop R, Vercruyssen M, Vermeulen K, Quirynen M (2013) Tolerance within the sleeve inserts of different surgical guides for guided implant surgery. Clin Oral Implants Res 24(6):630–634
27. Schneider D, Marquardt P, Zwahlen M, Jung RE (2009) A systematic review on the accuracy and the clinical outcome of computer-guided template-based implant dentistry. Clin Oral Implants Res 20(Suppl 4):73–86
28. Huang HM, Chiu CL, Yeh CY, Lee SY (2003) Factors influencing the resonance frequency of dental implants. J Oral MaxillofacSurg 61(10):1184–1188
29. Chong L, Khocht A, Suzuki JB, Gaughan J (2009) Effect of implant design on initial stability of tapered implants. J Oral Implantol 35(3):130–135
30. Dos Santos MV, Elias CN, Cavalcanti Lima JH (2011) The effects of superficial roughness and design on the primary stability of dental implants. Clin Implant Dent Relat Res 13(3):215–223
31. Dhore CR, Snel SJ, Jacques SV, Naert IE, Walboomers XF, Jansen JA (2008) In vitro osteogenic potential of bone debris resulting from placement of titanium screw-type implants. Clin Oral Implants Res 19(6):606–611
32. Vodicka P, Smetana K Jr, Dvorankova B, Emerick T, Xu YZ, Ourednik J et al (2005) The miniature pig as an animal model in biomedical research. Ann N Y Acad Sci 1049:161–171
33. Swindle MM, Makin A, Herron AJ, ClubbFJ J, Frazier KS (2012) Swine as models in biomedical research and toxicology testing. Vet Pathol 49(2):344–356
34. Pearce AI, Richards RG, Milz S, Schneider E, Pearce SG (2007) Animal models for implant biomaterial research in bone: a review. Eur Cell Mater 13:1–10
35. Saha S, Pal S, Albright JA (1982) Surgical drilling: design and performance of an improved drill. J Biomech Eng 104(3):245–252
36. Wiggins KL, Malkin S (1976) Drilling of bone. J Biomech 9(9):553–559
37. Han S, Rho J, Medige J, Ziv I (1996) Ultrasound velocity and broadband attenuation over a wide range of bone mineral density. OsteoporosInt 6(4):291–296
38. Ansell RH, Scales JT (1968) A study of some factors which affect the strength of screws and their insertion and holding power in bone. J Biomech 1(4):279–302
39. Siu WS, Qin L, Cheung WH, Leung KS (2004) A study of trabecular bones in ovariectomized goats with micro-computed tomography and peripheral quantitative computed tomography. Bone 35(1):21–26
40. Shuaib I, Hillery M (1995) Forces generated in guide-wires when drilling human bone. ProcInst MechEng H 209(3):157–162
41. Majumdar S (2003) Current technologies in the evaluation of bone architecture. CurrOsteoporos Rep 1(3):105–109
42. Bonfield W, Li CH (1968) The temperature dependence of the deformation of bone. J Biomech 1(4):323–329
43. Martinez H, Davarpanah M, Missika P, Celletti R, Lazzara R (2001) Optimal implant stabilization in low density bone. Clin Oral Implants Res 12(5):423–432
44. O’Sullivan D, Sennerby L, Meredith N (2004) Influence of implant taper on the primary and secondary stability of osseointegrated titanium implants. Clin Oral Implants Res 15(4):474–480
45. Scarano A, Degidi M, Iezzi G, Petrone G, Piattelli A (2006) Correlation between implant stability quotient and bone-implant contact: a retrospective histological and histomorphometrical study of seven titanium implants retrieved from humans. Clin Implant Dent Relat Res 8(4):218–222
46. Wong M, Eulenberger J, Schenk R, Hunziker E (1995) Effect of surface topology on the osseointegration of implant materials in trabecular bone. J Biomed Mater Res 29(12):1567–1575
47. Li J (1997) Bone-implant interface and remaining tissues on the implant surface after push-out test: an SEM observation. Biomed Mater Eng 7(6):379–385
48. Sakoh J, Wahlmann U, Stender E, Nat R, Al-Nawas B, Wagner W (2006) Primary stability of a conical implant and a hybrid, cylindric screw-type implant in vitro. Int J Oral Maxillofac Implants 21(4):560–566
49. Kay JF, Gilman L, May TC (1991) The tri-spade drill for endosseous dental implant installation. J Oral Implantol 17(4):424–428
50. Toyoshima T, Wagner W, Klein MO, Stender E, Wieland M, Al-Nawas B (2011) Primary stability of a hybrid self-tapping implant compared to a cylindrical non-self-tapping implant with respect to drilling protocols in an ex vivo model. Clin Implant Dent Relat Res 13(1):71–78
51. Beaman FD, Bancroft LW, Peterson JJ, Kransdorf MJ, Menke DM, DeOrio JK (2006) Imaging characteristics of bone graft materials. Radiographics 26(2):373–388
52. Hultin M, Davidson T, Gynther G, Helgesson G, Jemt T, Lekholm U et al (2012) Oral rehabilitation of tooth loss: a systematic review of quantitative studies of OHRQoL. Int J Prosthodont 25(6):543–552
53. Amorim MA, Takayama L, Jorgetti V, Pereira RM (2006) Comparative study of axial and femoral bone mineral density and parameters of mandibular bone quality in patients receiving dental implants. OsteoporosInt 17(10):1494–1500
54. Esposito M, Hirsch JM, Lekholm U, Thomsen P (1998) Biological factors contributing to failures of osseointegrated oral implants. (II). Etiopathogenesis. Eur J Oral Sci 106(3):721–764