Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation

Acta Biomaterialia

Volumn 16, Issue 1, 2015, Pages 215-222

  Zhang, Fei ^a   Vanmeensel, Kim ^a   Batuk, Maria ^b   Hadermann, Joke ^b   Inokoshi, Masanao ^c   Van Meerbeek, Bart ^c   Naert, Ignace ^c   Vleugels, Jef ^a  

^a UNIVERSITY OF LEUVEN   (Belgium)

^b UNIVERSITY OF ANTWERP   (Belgium)

^c UNIVERSITY HOSPITALS LEUVEN   (Belgium)

Author keywords

Aging; Ceramic structure; Dental restorative material; Translucency; Zirconia

Indexed keywords

ALUMINA; ALUMINUM OXIDE; CERAMIC MATERIALS; DOPING (ADDITIVES); FILLING; GRAIN BOUNDARIES; LANTHANUM OXIDES; NEODYMIUM COMPOUNDS; SEGREGATION (METALLOGRAPHY);

CERAMICS STRUCTURE; DENTAL RESTORATIONS; DENTAL RESTORATIVE MATERIALS; DOPANT SEGREGATION; GRAIN BOUNDARY SEGREGATION; HYDROTHERMAL STABILITIES; TRANSLUCENCY; TRANSLUCENTS; TRIVALENTS; VENEERING PORCELAINS;

ZIRCONIA;

DENTAL CERAMICS; ZIRCONIUM OXIDE; CATION; LANTHANUM; LANTHANUM OXIDE; OXIDE; YTTRIUM; ZIRCONIUM;

AGING; ARTICLE; CONTROLLED STUDY; DENTAL SURGERY; GRAIN; HARDNESS; IN VITRO STUDY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; THERMOSTABILITY; TRANSMISSION ELECTRON MICROSCOPY; CERAMICS; CHEMISTRY; CRYSTALLIZATION; KINETICS; PARTICLE SIZE; TIME;

CATIONS; CERAMICS; CRYSTALLIZATION; DENTAL RESTORATION, PERMANENT; HARDNESS; KINETICS; LANTHANUM; OXIDES; PARTICLE SIZE; TIME FACTORS; YTTRIUM; ZIRCONIUM;

EID: 84930935085     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2015.01.037     Document Type: Article

References (55)

1. Kelly JR. Ceramics in restorative and prosthetic dentistry. Annu Rev Mater Sci 1997;27:443-68.
2. Zarone F, Russo S, Sorrentino R. From porcelain-fused-to-metal to zirconia: clinical and experimental considerations. Dent Mater 2011;27:83-96.
3. Manicone PF, Rossi Iommetti P, Raffaelli L. An overview of zirconia ceramics: basic properties and clinical applications. J Dent 2007;35:819-26.
4. Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. Current status of zirconia restoration. J Prosthodont Res 2013;57:236-61.
5. Zhang Y. Making yttria-stabilized tetragonal zirconia translucent. Dent Mater 2014;30:1195-203.
6. Vichi A, Carrabba M, Paravina R, Ferrari M. Translucency of ceramic materials for CEREC CAD/CAM system. J Esthetic Restor Dent 2014;26:224-31.
7. Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307.
8. Studart AR, Filser F, Kocher P, Gauckler LJ. In vitro lifetime of dental ceramics under cyclic loading in water. Biomaterials 2007;28:2695-705.
9. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25.
10. Garvie RC, Hannink RH, Pascoe RT. Ceramic steel. Nature 1975;258:703-4.
11. Chevalier J, Cales B, Drouin JM. Low-temperature aging of Y-TZP ceramics. J Am Ceram Soc 1999;82:2150-4.
12. Chevalier J. What future for zirconia as a biomaterial? Biomaterials 2006;27:535-43.
13. Lughi V, Sergo V. Low temperature degradation-aging- of zirconia: a critical review of the relevant aspects in dentistry. Dent Mater 2010;26:807-20.
14. Al-Amleh B, Lyons K, Swain M. Clinical trials in zirconia: a systematic review. J Oral Rehabil 2010;37:641-52.
15. Ross IM, Rainforth WM, McComb DW, Scott AJ, Brydson R. The role of trace additions of alumina to yttria-tetragonal zirconia polycrystals (Y-TZP). Scripta Mater 2001;45:653-60.
16. Fujisaki K, Kawamura K, Imai H. Zirconia powder for translucent dental zirconia: Zpex. J Tosoh Res 2012;56:57-61. http://www.tosoh.co.jp/technology/report/pdfs/2012-03-06.pdf [in Japanese].
17. Baldissara P, Llukacej A, Ciocca L, Valandro FL, Scotti R. Translucency of zirconia copings made with different CAD/CAM systems. J Prosthet Dent 2010;104:6-12.
18. Chen Y-M, Smales RJ, Yip KHK, Sung W-J. Translucency and biaxial flexural strength of four ceramic core materials. Dent Mater 2008;24:1506-11.
19. Heintze SD, Rousson V. Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review. Int J Prosthodont 2010;23:493-502.
20. Guazzato M, Proos K, Quach L, Vincent Swain M. Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials 2004;25:5045-52.
21. Beuer F, Stimmelmayr M, Gueth J-F, Edelhoff D, Naumann M. In vitro performance of full-contour zirconia single crowns. Dent Mater 2012;28: 449-56.
22. Zhang Y, Lee JJW, Srikanth R, Lawn BR. Edge chipping and flexural resistance of monolithic ceramics. Dent Mater 2013;29:1201-8.
23. Preis V, Behr M, Hahnel S, Handel G, Rosentritt M. In vitro failure and fracture resistance of veneered and full-contour zirconia restorations. J Dent 2012;40:921-8.
24. Samodurova A, Kocjan A, Swain MV, Kosmac T. The combined effect of alumina and silica co-doping on the ageing resistance of 3Y-TZP bioceramics. Acta Biomater 2014.
25. Schechner G, Theelke B, Dittmann R, Herrmann A, Rolf J, Russell VA, et al. A new class of zirconia material for dental application. J Dent Res: AADR annual meeting in Charlotte (Abstract #796) 2014.
26. Communications A. Moving target. Inside Dental Technology 2014;5.
27. Klimke J, Trunec M, Krell A. Transparent tetragonal yttria-stabilized zirconia ceramics: influence of scattering caused by birefringence. J Am Ceram Soc 2011;94:1850-8.
28. Matsui K, Yoshida H, Ikuhara Y. Nanocrystalline. Ultra-degradation-resistant zirconia: its grain boundary nanostructure and nanochemistry. Sci Rep 2014;4.
29. Nogiwa-Valdez AA, Rainforth WM, Zeng P, Ross IM. Deceleration of hydrothermal degradation of 3Y-TZP by alumina and lanthana co-doping. Acta Biomater 2013;9:6226-35.
30. Guo X. Property degradation of tetragonal zirconia induced by low-temperature defect reaction with water molecules. Chem Mater 2004; 16:3988-94.
31. Matsui K. Grain-boundary structure and microstructure development mechanism in 2-8 mol% yttria-stabilized zirconia polycrystals. Acta Mater 2008;56:1315-25.
32. Hwang S-L, Chen IW. Grain size control of tetragonal zirconia polycrystals using the space charge concept. J Am Ceram Soc 1990;73:3269-77.
33. Anselmi-Tamburini U, Woolman JN, Munir ZA. Transparent nanometric cubic and tetragonal zirconia obtained by high-pressure pulsed electric current sintering. Adv Funct Mater 2007;17:3267-73.
34. Eichler J, Rödel J, Eisele U, Hoffman M. Effect of grain size on mechanical properties of submicrometer 3Y-TZP: fracture strength and hydrothermal degradation. J Am Ceram Soc 2007;90:2830-6.
35. Shannon R. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Crystallogr Sect A 1976;32: 751-67.
36. Garvie RC, Nicholson PS. Phase analysis in zirconia systems. J Am Ceram Soc 1972;55:303-5.
37. 2 system by X-ray diffraction. J Am Ceram Soc 1984;67. C-119-21.
38. Kohorst P, Borchers L, Strempel J, Stiesch M, Hassel T, Bach F-W, et al. Lowtemperature degradation of different zirconia ceramics for dental applications. Acta Biomater 2012;8:1213-20.
39. Gremillard L, Chevalier J, Epicier T, Deville S, Fantozzi G. Modeling the aging kinetics of zirconia ceramics. J Eur Ceram Soc 2004;24:3483-9.
40. Anstis GR, Chantikul P, Lawn BR, Marshall DB. A critical evaluation of indentation techniques for measuring fracture toughness: I, Direct crack measurements. J Am Ceram Soc 1981;64:533-8.
41. ISO standard 13356:2008. Implants for surgery - ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP). ISO standard 13356 2008.
42. ISO 6872:2008. Dentistry - Ceramic materials. ISO 6872 2008.
43. Della Bona A, Nogueira AD, Pecho OE. Optical properties of CAD-CAM ceramic systems. J Dent 2014;42:1202-9.
44. Colorimetry: understanding the CIE System. Canada: John Wiley & Sons Inc., Hoboken, NJ; 2007.
45. Guo X. Roles of alumina in zirconia for functional applications. J Am Ceram Soc 2003;86:1867-73.
46. Boulc'h F, Djurado E, Dessemond L. Dopant segregation and space charge effect in nanostructured tetragonal zirconia. J Electrochem Soc 2004;151:A1210-5.
47. Sakib Khan M, Saiful Islam M, Bates DR. Cation doping and oxygen diffusion in zirconia: a combined atomistic simulation and molecular dynamics study. J Mater Chem 1998;8:2299-307.
48. 2. Solid State Ionics 2000;128:243-54.
49. Pezzotti G, Munisso MC, Porporati AA, Lessnau K. On the role of oxygen vacancies and lattice strain in the tetragonal to monoclinic transformation in alumina/zirconia composites and improved environmental stability. Biomaterials 2010;31:6901-8.
50. Zimmermann A, Rödel J. Generalized Orowan-Petch plot for brittle fracture. J Am Ceram Soc 1998;81:2527-32.
51. 3 coatings. Surf Coat Technol 2005;194:31-5.
52. Zhang F, Vanmeensel K, Inokoshi M, Batuk M, Hadermann J, Van Meerbeek B, et al. Critical influence of alumina content on the low temperature degradation of 2-3 mol% yttria-stabilized TZP for dental restorations. J Eur Ceram Soc 2015;35:741-50.
53. Zhang H, Li Z, Kim B-N, Morita K, Yoshida H, Hiraga K, et al. Effect of alumina dopant on transparency of tetragonal zirconia. J Nanomater 2012;2012:5.
54. Apetz R, van Bruggen MPB. Transparent alumina: a light-scattering model. J Am Ceram Soc 2003;86:480-6.
55. Li P, Chen IW, Penner-Hahn JE. Effect of dopants on zirconia stabilization-an X-ray absorption study: I. Trivalent dopants. J Am Ceram Soc 1994;77:118-28.