Combination of noninvasive approaches for general assessment of induction motors

IEEE Transactions on Industry Applications

Volumn 51, Issue 3, 2015, Pages 2172-2180

  Picazo Ródenas, María J ^a   Antonino Daviu, Jose ^a   Climente Alarcon, Vicente ^b   Royo Pastor, Rafael ^a   Mota Villar, Ariel ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^b AALTO UNIVERSITY   (Finland)

Author keywords

Bars; bearing faults; fault diagnosis; Harmonic analysis; Induction machines; Induction motors; infrared analysis; Reliability; rotor asymmetries; Rotors; Time frequency analysis; Transient analysis

Indexed keywords

BARS (METAL); FAILURE ANALYSIS; FAULT DETECTION; HARMONIC ANALYSIS; INDUCTION MOTORS; RELIABILITY; RELIABILITY ANALYSIS; ROTORS; TRANSIENT ANALYSIS;

BEARING FAULT; INDUCTION MACHINES; INFRARED ANALYSIS; ROTOR ASYMMETRY; TIME FREQUENCY ANALYSIS;

ROTORS (WINDINGS);

EID: 84930226557     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2014.2382880     Document Type: Article

References (44)

1. W. T. Thomson and M. Fenger, "Current signature analysis to detect induction motor faults," IEEE Ind. Appl. Mag., vol. 7, no. 4, pp. 26-34, Jul./Aug. 2001.
2. C. Yang et al., "Reliable detection of induction motor rotor faults under the rotor axial air duct influence," IEEE Trans. Ind. Appl., vol. 50, no. 4, pp. 2493-2502, Jul./Aug. 2014.
3. N. M. Elkasabgy, A. R. Eastham, and G. E. Dawson, "Detection of broken rotor bars in the cage rotor on an induction machine," IEEE Trans. Ind. Appl., vol. 28, no. 1, pp. 165-171, Jan./Feb. 1992.
4. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "Recent developments of induction motor drives fault diagnosis using AI techniques," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 994-1004, Oct. 2000.
5. P. Zhang, Y. Du, T. G. Habetler, and B. Lu, "A survey of condition monitoring and protection methods for medium-voltage induction motors," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 34-46, Jan./Feb. 2011.
6. J. R. Cameron, W. T. Thomson, and A. B. Dow, "Vibration and current monitoring for detecting airgap eccentricity in large induction motors," Proc. Inst. Elect. Eng.-B Electr. Power Appl., vol. 133, pt. B, no. 3, pp. 155-163, May 1986.
7. A. Bellini, C. Concari, G. Franchescini, C. Tassoni, and A. Toscani, "Vibrations, currents and stray flux signals to asses induction motors rotor conditions," in Proc. 32nd Annu. IEEE IECON, 2006, pp. 4963-4968.
8. S. M. J. R. Fatemi, H. Henao, and G.-A. Capolino, "The effect of the mechanical behavior on the stray flux in an induction machine based electromechanical system," in Proc. IEEE Int. SDEMPED, Sep. 6-8, 2007, pp. 155-160.
9. A. Khezzar, M. El Kamel Oumaamar, M. Hadjami, M. Boucherma, and H. Razik, "Induction motor diagnosis using line neutral voltage signatures," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4581-4591, Nov. 2009.
10. S. M. A. Cruz, "An active-reactive power method for the diagnosis of rotor faults in three-phase induction motors operating under time-varying load conditions," IEEE Trans. Energy Convers., vol. 27, no. 1, pp. 71-84, Mar. 2012.
11. R. R. Schoen and T. G. Habetler, "Evaluation and implementation of a system to eliminate arbitrary load effects in current-based monitoring of induction machines," IEEE Trans. Ind. Appl., vol. 33, no. 6, pp. 1571-1577, Nov./Dec. 1997.
12. J. A. Antonino-Daviu, M. Riera-Guasp, J. R. Folch, and M. P. M. Palomares, "Validation of a new method for the diagnosis of rotor bar failures via wavelet transform in industrial induction machines," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 990-996, Jul./Aug. 2006.
13. S. Lee et al., "Evaluation of the influence of rotor axial air duct design on condition monitoring of induction motors," IEEE Trans. Ind. Appl., vol. 49, no. 5, pp. 2024-2033, Sep./Oct. 2013.
14. J. Park et al., "Evaluation of the detectability of broken rotor bars for double squirrel cage rotor induction motors," in Proc. IEEE ECCE, Sep. 2010, pp. 2493-2500.
15. M. Riera-Guasp, J. A. Antonino-Daviu, M. Pineda-Sanchez, R. Puche-Panadero, and J. Perez-Cruz, "A general approach for the transient detection of slip-dependent fault components based on the discrete wavelet transform," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4167-4180, Dec. 2008.
16. J. Pons-Llinares, V. Climente-Alarcón, F. Vedreño-Santos, J. Antonino-Daviu, and M. Riera-Guasp, "Electric machines diagnosis techniques via transient current analysis," in Proc. 38th Annu. IEEE IECON, Montreal, QC, Canada, Oct. 25-28, 2012, pp. 3893-3900.
17. J. A. Antonino-Daviu et al., "Toward condition monitoring of damper windings in synchronous motors via EMD analysis," IEEE Trans. Energy Convers., vol. 27, no. 2, pp. 432-439, Jun. 2012.
18. B. Li, X. Zhu, S. Zhao, and W. Niu, "HV power equipment diagnosis based on infrared imaging analyzing," in Proc. Int. Conf. Power Syst. Technol., 2006, pp. 1-4.
19. Y. Chou and L. Yao, "Automatic diagnosis system of electrical equipment using infrared thermography," in Proc. Int. Conf. Softw. Comput. Pattern Recognit., 2009, pp. 155-160.
20. Y. Han and Y. H. Song, "Condition monitoring techniques for electrical equipment," IEEE Trans. Power Del., vol. 18, no. 1, pp. 4-13, Jan. 2003.
21. J. Piotrowski, Shaft Alignment Handbook, 3rd ed. Boca Raton, FL, USA: CRC Press, 2007.
22. S. U. Haq and T. Bashir, "Evaluation of induction motor groundwall insulation using infrared thermography," in Proc. 2nd Int. Conf. Emerging Technol., Peshawar, Pakistan, Nov. 13-14, 2006, pp. 416-420.
23. J. Yun et al., "Detection and classification of stator turn faults and high-resistance electrical connections for induction machines," IEEE Trans. Ind. Appl., vol. 45, no. 2, pp. 1923-1931, Apr. 2009.
24. Boglietti et al., "Evolution and modern approaches thermal analysis of electrical machines," IEEE Trans. Ind. Electron., vol. 56, no. 3, pp. 871-882, Mar. 2009.
25. L. Frosini, A. Borin, L. Girometta, and G. Venchi, "A novel approach to detect short circuits in low voltage induction motor by stray flux measurement," in Proc. IEEE ICEM, Marseille, France, 2012, pp. 1538-1544.
26. C. Harlisca, L. Szabó, L. Frosini, and A. Albini, "Bearing faults detection in induction machines based on statistical processing of the stray fluxes measurements," in Proc. IEEE SDEMPED, Valencia, Spain, 2013, pp. 371-376.
27. D. G. Dorrell, W. T. Thomson, and S. Roach, "Analysis of airgap flux, current, vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," IEEE Trans. Ind. Appl., vol. 33, no. 1, pp. 24-34, Jan./Feb. 1997.
28. G. Salles, F. Filippetti, C. Tassoni, G. Grellet, and G. Franceschini, "Monitoring of induction motor load by neural network techniques," IEEE Trans. Power Electron., vol. 15, no. 4, pp. 762-768, Jul. 2000.
29. H. Henao, C. Demian, and G.-A. Capolino, "A frequency-domain detection of stator winding faults in induction machines using an external flux sensor," IEEE Trans. Ind. Appl., vol. 39, no. 5, pp. 1272-1279, Sep./Oct. 2003.
30. H. Henao, C. Demian, and G.-A. Capolino, "A frequency-domain detection of stator winding faults in induction machines using an external flux sensor," in Conf. Rec. 37th IEEE IAS Annu. Meet., 2002, vol. 3, pp. 1511-1516.
31. H. Henao, G.-A. Capolino, and C. S. Martis, "On the stray flux analysis for the detection of the three-phase induction machine faults," in Conf. Rec. 38th IEEE IAS Annu. Meet., 2003, vol. 2, pp. 1368-1373.
32. L. Frosini, A. Borin, A. Albini, and F. Benzi, "New techniques to simulate and diagnose stator winding faults in low voltage induction motors," in Proc. ICEM, pp. 1781-1787.
33. L. Frosini, E. Bassi, and L. Girometta, "Detection of stator short circuits in inverter-fed induction motors," in Proc. 38th Annu. IEEE IECON, pp. 5084-5089.
34. R. A. Leonhard and W. T. Thompson, "Vibration and stray flux monitoring for unbalanced supply and inter-turn winding fault diagnosis in induction machines," Brit. J. Non-Destructive Testing, pp. 211-215, Jul. 1986.
35. S. Shin, J. Kim, S. B. Lee, C. Lim, and E. Wiedenbrug, "Evaluation of the influence of rotor magnetic anisotropy on condition monitoring of 2 pole induction motors," in Proc. IEEE ECCE, Sep. 2014, pp. 638-645.
36. J. Antonino-Daviu et al., "Detection of broken outer-cage bars for doublecage induction motors under the startup transient," IEEE Trans. Ind. Appl., vol. 48, no. 5, pp. 1539-1548, Sep./Oct. 2012.
37. M. Riera-Guasp, J. Pons-Llinares, F. Vedreno-Santos, J. A. Antonino-Daviu, and M. F. Cabanas, "Evaluation of the amplitudes of high-order fault related components in double bar faults," in Proc. 8th Int. IEEE SDEMPED, Bologna, Italy, Sep. 2011, pp. 307-315.
38. A. Bellini et al., "On-field experience with online diagnosis of large induction motors cage failures using MCSA," IEEE Trans. Ind. Appl., vol. 38, no. 4, pp. 1045-1053, Jul./Aug. 2002.
39. H. Henao et al., "Trends in fault diagnosis for electrical machines," IEEE Ind. Electron. Mag., vol. 8, no. 2, pp. 31-42, Jun. 2014.
40. F. Immovilli, A. Bellini, R. Rubini, and C. Tassoni, "Diagnosis of bearing faults in induction machines by vibration or current signals: A critical comparison," IEEE Trans. Ind. Appl., vol. 46, no. 4, pp. 1350-1359, Jul./Aug. 2010.
41. R. R. Schoen, T. G. Habetler, F. Kamran, and R. G. Bartfield, "Motor bearing damage detection using stator current monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1274-1279, Nov./Dec. 1995.
42. J. Pons-Llinares, J. Antonino-Daviu, J. Roger-Folch, D. Moríñigo-Sotelo, and O. Duque-Pérez, "Mixed eccentricity diagnosis in inverter-fed induction motors via the adaptive slope transform of transient stator currents," Mech. Syst. Signal Process., vol. 48, no. 1/2, pp. 426-435, Oct. 2014.
43. J. Antonino-Daviu et al., "Feature extraction for the prognosis of electromechanical faults in asynchronous motors using the Hilbert-Huang transform," Energy Convers. Manag., vol. 50, no. 7, pp. 1810-1820, Jul. 2009.
44. Z. K. Peng, P. W. Tse, and F. L. Chu, "A comparison study of improved Hilbert-Huang transform and wavelet transform: Application to fault diagnosis for rolling bearing," Mech. Syst. Signal Process., vol. 19, no. 5, pp. 974-988, Sep. 2005.