Evaluation of the influence of rotor magnetic anisotropy on condition monitoring of 2 pole induction motors

2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014

Volumn , Issue , 2014, Pages 638-645

  Shin, Sungsik ^a   Kim, Jongwan ^a   Lee, Sang Bin ^a   Lim, Chaewoong ^b   Wiedenbrug, Ernesto J ^c  

^a Korea University   (South Korea)

^b Hansung Electric Industrial Co   (South Korea)

^c NONE

Author keywords

[No Author keywords available]

Indexed keywords

CONDITION MONITORING; FAULT DETECTION; LAMINATING; MAGNETIC ANISOTROPY; MAGNETISM; SILICON STEEL;

CURRENT COMPONENT; GRAIN-ORIENTED SILICON STEEL; MOTOR CURRENT SIGNATURE ANALYSIS; ON CONDITION MONITORING; ONLINE MONITORING; ROTOR ANISOTROPY; ROTOR FAULT DETECTION; VIABLE SOLUTIONS;

INDUCTION MOTORS;

EID: 84930235590     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ECCE.2014.6953455     Document Type: Conference Paper

References (27)

1. H. Shimanaka, Y. Ito, K. Matsumura, and B. Fukuda, "Recent development of non-oriented electrical steel sheets," Journal of Magnetism and Magnetic Materials, Vol. 26, pp. 57-64, 1982.
2. M. Shiozaki, and Y. Kurosaki, "Anisotropy of magnetic properties in non-oriented electrical steel sheets," Textures and Microstructures, Vol. 11, pp. 159-170, 1989.
3. M. Flavio de Campos, "Anisotropy of steel sheets and consequence for Epstein test," Proc. of IMEKO World Congress, pp. 1-8, Sept. 2006.
4. Magnetic Materials - Part 2: Methods of Measurement of the Magnetic Properties of Electrical Steel Sheet and Strip by Means of an Epstein Frame, IEC 60404-2, 2006.
5. J.H.R. Page, "Some observations on the magnetic anisotropy of non-oriented 3% Si steel sheets," IEEE Trans. on Magn., Vol. MAG-20, no. 5, pp. 1542-1544, Sept. 1984.
6. A. Honda, B. Fukuda, I. Ohyama, and Y. Mine, "Effects of magnetic properties of nonoriented electrical steel sheets on motor efficiency," Journal of Materials Engineering, Vol. 12, no. 1, pp. 41-45, 1990.
7. T.M. Wolbank, J.L. Machl, P. Macheiner, and H. Hauser, "Extraction and elimination of induction machines inherent asymmetry caused by lamination material anisotropy," Proc. of Power Electronics and Drive Systems, Vol. 1, pp. 508-513, Nov. 2003.
8. C. Hargis, B.G. Gaydon, and K. Kamash, "The detection of rotor defects in induction motors," Proc. IEE Int. Conf. Elec. Mach. Design and Appl., pp. 216-220, 1982.
9. G.B. Kliman, R.A. Koegl, J. Stein, R.D. Endicott, M.W. Madden, "Noninvasive detection of broken rotor bars in operating induction motors," IEEE Trans. on Ener. Conv., Vol. 3, no. 4, pp. 873-879, Dec. 1988.
10. W.T. Thomson, "On-line current monitoring - the influence of mechanical loads or a unique rotor design on the diagnosis of broken rotor bars in induction motors," Proc. of ICEM, pp. 1236-1240, 1992.
11. D. Leith, and D. Rankin, "Real time expert system for identifying rotor faults and mechanical influences in induction motor phase current," Proc. of IEE Electric Machines and Drives, Sept. 1991.
12. W.T. Thomson, and M. Fenger, "Current signature analysis to detect induction motor faults," IEEE Ind. Appl. Mag., Vol. 7, no. 4, pp. 26-34 July/August 2001.
13. S. Lee, J. Hong, S.B. Lee, E. Wiedenbrug, M. Teska, and H. Kim, "Evaluation of the Influence of Rotor Axial Air Duct Design on Condition Monitoring of Induction Motors," IEEE Trans. on Ind. Appl., Vol. 49, no. 5, Sept./Oct. 2013.
14. B. Kim, J. Yang, K. Lee, S.B. Lee, E.J. Wiedenbrug, and M.R. Shah, "Automated detection of rotor faults for inverter-fed induction machines under standstill conditions," IEEE Trans. on Ind. Appl., Vol. 47, no. 1, pp. 55-64, Jan./Feb. 2011.
15. nd Ed., Wiley-IEEE Press, 2014.
16. J. Antonino-Daviu, M. Riera-Guasp, J.R. Folch, and M.P. Molina-Palomares "Validation of a new method for the diagnosis of rotor bar failures via wavelet transform in industrial induction machines" IEEE Trans. on Ind. Appl., Vol. 42, no. 4, pp. 990-996, July/Aug. 2006.
17. C. Yang, T. Kang, D. Hyun, S.B. Lee, J. Antonino-Daviu, and J. Pons-Llinares, "Reliable detection of induction motor rotor faults under the rotor axial air duct influence," IEEE Trans. on Ind. Appl., Vol. 50, no. 4, July/Aug. 2014.
18. Y. Gritli, F. Filippetti, L. Zarri, "Advanced diagnosis of outer cage damage in double-squirrel-cage induction motors under time-varying conditions based on wavelet analysis," IEEE Trans. on Ind. Appl., Vol. 50, no. 3, pp. 1791-1800 May/June 2014.
19. F. Briz, M.W. Degner, A. Diez, and J.M. Guerrero, "On-line diagnosis of inverter-fed induction machines using high-frequency signal injection," IEEE Trans. Ind. Appl., Vol. 40, no. 4, pp. 1153-1161, Jul./Aug. 2004.
20. T.M. Wolbank, P. Nussbaumer, C. Hao, and P.E. Macheiner, "Monitoring of rotor-bar defects in inverter-fed induction machines at zero load and speed," IEEE Trans. on Ind. Electron., Vol. 58, no. 5, pp. 1468-1478, May 2011.
21. W. Deleroi, "Broken bar in a squirrel-cage rotor of an induction motor, Part 1: description by superimposed fault-currents (in German)," Archiv fur Elektrotechnik 67, pp. 91-99, 1984.
22. T.J. Sobczyk, and W. Maciolek, "Diagnostics of rotor-cage faults supported by effects due to higher MMF harmonics," Proc. of Power Tech Conf., Vol. 2, pp. 5-9, June 2003.
23. M. Riera-Guasp, J. Pons-Llinares, F. Vedreno-Santos, J.A. Antonino-Daviu, M. Fernandez Cabanas, "Evaluation of the amplitudes of highorder fault related components in double bar faults," Proc. of IEEE Int'l Sym. on Diagn. for Elec. Mach., Pwr. Electr. and Drives, pp. 307-315, Sept. 2011.
24. C.H. De Angelo, G.R. Bossio, J.M. Bossio, G.O. Garcia, "Broken bar detection in single-phase reciprocating compressors," Proc. of IEEE Ind. Electr. Conf., pp. 1125-1130, 2008.
25. H. Henao, H. Razik, and G.A. Capolino, "Analytical approach of the stator current frequency harmonics computation for detection of induction machine rotor faults," IEEE Trans. on Ind. Appl., Vol. 41, no. 3, pp. 801-807 May/June 2005.
26. B. Akin, U. Orguner, H.A. Toliyat, and M. Rayner, "Low order PWM inverter harmonics contributions to the inverter-fed induction machine fault diagnosis," IEEE Trans. on Ind. Electron., Vol. 55, no. 2, pp. 610-619, Feb. 2008.
27. T.A. Lipo, Introduction to AC machine design. Madison, WI: Wisconsin Power Electronics Research Center, Univ. Wisconsin, 2007.