The Effect of Operating Parameters on Soot Emissions in GDI Engines

SAE International Journal of Engines

Volumn 8, Issue 3, 2015, Pages 1322-1333

  Jiao, Qi ^a   Reitz, Rolf D ^a  

^a University of Wisconsin   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; ENGINES; GASOLINE; PARTICULATE EMISSIONS; SOOT;

DIRECT INJECTION SPARK IGNITION ENGINES; EARLY INJECTIONS; FUEL COMPOSITIONS; GASOLINE DIRECT INJECTION ENGINES; MULTICOMPONENT FUEL; OPERATING PARAMETERS; PARTICULATE MATTER EMISSIONS; WALL TEMPERATURES;

DIRECT INJECTION;

EID: 84928724610     PISSN: 19463936     EISSN: 19463944     Source Type: Journal    
DOI: 10.4271/2015-01-1071     Document Type: Article

References (50)

1. CARB, Preliminary Discussion Paper - Proposed Amendments to California's Low-emission Vehicle Regulations - Particulate Matter Mass, Ultrafine Solid Particle Number, and Black Carbon Emissions., in California Air Resources Board2010: Sacramento, CA.
2. Zhao, F., Lai, M. C., Harrington, D. L., Automotive Spark-Ignited Direct-Injection Gasoline Engines. Progress in Energy and Combustion Science, 1999. 25(5): p. 437-562.
3. Kittelson, D.B., Engines and Nanoparticles: A Review. Journal of Aerosol Science, 1998. 29(5-6): p. 575-588.
4. Eastwood, P., Particulate Emissions from Vehicles. 2008: Wiley-PEPublishing SeriesJohn Wiley and Sons.
5. Myung, C.L., Park, S., Exhaust Nanoparticle Emissions from Internal Combustion Engines: A Review. International Journal of Automotive Technology, 2012. 13(1): p. 9-22.
6. Mathis, U., Kaegi, R., Mohr, M., Zenobi, R., TEM Analysis of Volatile Nanoparticles from Particle Trap Equipped Diesel and Direct-Injection Spark-Ignition Vehicles. Atmospheric Environment, 2004. 38(26): p. 4347-4355.
7. Abdul-Khalek, I., Kittelson, D., Graskow, B., Wei, Q. et al., “Diesel Exhaust Particle Size: Measurement Issues and Trends,” SAE Technical Paper 980525, 1998, doi:10.4271/980525.
8. Abdul-Khalek, I., Kittelson, D., and Brear, F., “The Influence of Dilution Conditions on Diesel Exhaust Particle Size Distribution Measurements,” SAE Technical Paper 1999-01-1142, 1999, doi:10.4271/1999-01-1142.
9. Kong, S.-C., Drop/Wall Interaction Criteria and Their Applications in Diesel Spray Modeling. Atomization and Sprays, 2007. 17(6): p. 473-499.
10. Lippert, A.M., Modeling of Multi-component Fuels with Application to Sprays and Simulation of Diesel Engne Cold Start, 1999, University of Wisconsin-Madison.
11. Drake, M., Fansler, T., Solomon, A., and Szekely, G., “Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions from a Wall-Controlled Spark-Ignited Direct-Injection Engine,” SAE Technical Paper 2003-01-0547, 2003, doi:10.4271/2003-01-0547.
12. Svensson, K.I., Effects of Fuel Molecular Structure and Composition on Soot Formation in Direct-Injection Spray Flames., in Mechanical Engineering, 2005, Brigham Young University.
13. Zhao, F.Q., Harrington, D. L., Lai, M-C, Automotive Gasoline Direct-Injection Engines. 2002: Society of Automotive Engineers, Inc., Warrendale, Pa.
14. Nogi, T., Shiraishi, T., Nakayama, Y., Ohsuga, M. et al., “Stability Improvement of Direct Fuel Injection Engine under Lean Combustion Operation,” SAE Technical Paper 982703, 1998, doi:10.4271/982703.
15. Han, Z., Yi, J., and Trigui, N., “Stratified Mixture Formation and Piston Surface Wetting in a DISI Engine,” SAE Technical Paper 2002-01-2655, 2002, doi:10.4271/2002-01-2655.
16. Han, Z., Reitz, R., Yang, J., and Anderson, R., “Effects of Injection Timing on Air-Fuel Mixing in a Direct-Injection Spark-Ignition Engine,” SAE Technical Paper 970625, 1997, doi:10.4271/970625.
17. Maricq, M., Podsiadlik, D., Brehob, D., and Haghgooie, M., “Particulate Emissions from a Direct-Injection Spark-Ignition (DISI) Engine,” SAE Technical Paper 1999-01-1530, 1999, doi:10.4271/1999-01-1530.
18. Seong, H., Lee, K., and Choi, S., “Effects of Engine Operating Parameters on Morphology of Particulates from a Gasoline Direct Injection (GDI) Engine,” SAE Technical Paper 2013-01-2574, 2013, doi:10.4271/2013-01-2574.
19. Oh, H., Bae, C., Effects of the Injection Timing on Spray and Combustion Characteristics in a Spray-guided DISI Engine under Lean-stratified Operation. Fuel, 2013. 107: p. 225-235.
20. Farron, C., Matthias, N., Foster, D., Andrie, M. et al., “Particulate Characteristics for Varying Engine Operation in a Gasoline Spark Ignited, Direct Injection Engine,” SAE Technical Paper 2011-01-1220, 2011, doi:10.4271/2011-01-1220.
21. Iiyama, A., et al., Attainment of High Power with Low Fuel Consumption and Exhaust Emisssions in a Direct-Injection Gasoline Engine. 1998 FISITA Technical Paper No. F98T048, 1998b.
22. Iiyama, A., et al., Realization of High Power and Low Fuel Consumption with Low Fuel Consumption with Low Exhaust Emissions in a Direct-Injection Gasoline Engine. Proceedings of GPC'98, Advanced Engine Design and Performance, 1998a: p. 76-88.
23. Yang, J., Munoz, R., Anderson, R., and Lavoie, G., “Study of a Stratified-Charge DISI Engine with an Air-Forced Fuel Injection System,” SAE Technical Paper 2000-01-2901, 2000, doi:10.4271/2000-01-2901.
24. Schulz, F., Schmidt, J., Kufferath, A., and Samenfink, W., “Gasoline Wall Films and Spray/Wall Interaction Analyzed by Infrared Thermography,” SAE Int. J. Engines 7(3):1165-1177, 2014, doi:10.4271/2014-01-1446.
25. Jiao, Q., Soot Formation in GDI/GTDI Engines, 2014, University of Wisconsin-Madison, Ph.D. Dissertation.
26. Jiao, Q. and Reitz, R., “Modeling of Equivalence Ratio Effects on Particulate Formation in a Spark-Ignition Engine under Premixed Conditions,” SAE Technical Paper 2014-01-1607, 2014, doi:10.4271/2014-01-1607.
27. Beale, J.C., Reitz, R. D., Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model. Atomization and Spray, 1999. 9: p. 623-650.
28. Abani, N., Munnannur, A., Reitz, R. D., Reduction of Numerical Parameter Dependencies in Diesel Spray Models. Journal of Engineering for Gas Turbines and Power, 2008. 130(3).
29. O'Rourke, P.J., Collective Drop Effects on Vaporizing Liquid Sprays, 1981: PhD, Department of Mechanical and Aerospace Engineering, Princeton University.
30. Ra, Y., Reitz, R. D., A Vaporization Model for Discrete Multi-component Fuel Sprays. International Journal of Multiphase Flow, 2009. 35: p. 101-117.
31. Han, Z., Reitz, R.D., Turbulent Modeling of Internal Combustion Engines Using RNG k-eps Model. Comb. Sci. Tech, 1995. 106: p. 267-295.
32. Wang, B.L., Lee, C. W., Reitz, R. D., Miles, P. C., Han, Z., A Generalized RNG Turbulent Model and its Application to a Light-duty Diesel Engine Operating in a Low Temperature Combustion Regime. International Journal of Engine Research, 2012.
33. O'Rourke, P. and Amsden, A., “A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines,” SAE Technical Paper 961961, 1996, doi:10.4271/961961.
34. O'Rourke, P. and Amsden, A., “A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model,” SAE Technical Paper 2000-01-0271, 2000, doi:10.4271/2000-01-0271.
35. Vishwanathan, G., Reitz, R. D., Development of a Practial Soot Modeling Approach and Its Application to Low-Temperature Diesel Combustion. Combustion Science and Technology, 2010. 182: p. 1050-1082.
36. Fan, L. and Reitz, R., “Development of an Ignition and Combustion Model for Spark-Ignition Engines,” SAE Technical Paper 2000-01-2809, 2000, doi:10.4271/2000-01-2809.
37. Tan, Z., Kong, S., and Reitz, R., “Modeling Premixed and Direct Injection SI Engine Combustion Using the G-Equation Model,” SAE Technical Paper 2003-01-1843, 2003, doi:10.4271/2003-01-1843.
38. Liang, L. and Reitz, R., “Spark Ignition Engine Combustion Modeling Using a Level Set Method with Detailed Chemistry,” SAE Technical Paper 2006-01-0243, 2006, doi:10.4271/2006-01-0243.
39. Perini, F., Galligani, E., Reitz, R. D., An Analytical Jacobian Approach to Sparse Reaction Kinetics for Computationally Efficient Combustion Modeling with Large Reaction Mechanisms. Energy & Fuels, 2012. 26(8): p. 4804-4822.
40. Wang, H., Jiao, Q., Yao, M. F., Yao, B. B., Qiu, L., Reitz, R. D., Development of an N-heptane/Toluene/Polyaromatic Hydrocarbon Mechanism and its Application and Soot Prediction. International Journal of Engine Research, 2013.
41. VanDerWege, B., Yi, J., Personal communication: Experimental data for Ford DISI/GTDI engines at varied conditions, 2013.
42. Ra, Y., Reitz, R. D., A Combustion Model for IC Engine Combustion Simulations with Multi-component Fuels. Combustion and Flame, 2011. 158(1): p. 69-90.
43. Yang, S., Ra, Y., Reitz, R. D., VanDerWege, B., Yi, J., Integration of a Discrete Multi-component Fuel Evaporation Model with a G-equation Flame Propagation Combustion Model and its Validation. International J. of Engine Research, 2012. 13(4): p. 370-384.
44. Su, X., Ra, Y., and Reitz, R., “A Surrogate Fuel Formulation Approach for Real Transportation Fuels with Application to Multi-Dimensional Engine Simulations,” SAE Int. J. Fuels Lubr. 7(1):236-249, 2014, doi:10.4271/2014-01-1464.
45. Jiao, Q., Ra, Y., and Reitz, R., “Modeling the Influence of Molecular Interactions on the Vaporization of Multi-component Fuel Sprays,” SAE Technical Paper 2011-01-0387, 2011, doi:10.4271/2011-01-0387.
46. Jiao, Q., Reitz, R. D., Modeling Soot Emissions from Wall Films in a DISI Engine. International Journal of Engine Research, DOI:10.1177/1468087414562008, 2014.
47. Takagi, Y., Itoh, T., Muranaka, S., Iiyama, A. et al., “Simultaneous Attainment of Low Fuel Consumption High Output Power and Low Exhaust Emissions in Direct Injection SI Engines,” SAE Technical Paper 980149, 1998, doi:10.4271/980149.
48. Syzbist, J.P., Youngquist, A. D., Barone, T. L., Storey, J. M., Moore, W. R., Foster, M., Confer, K., Ethanol Blends and Engine Operating Strategy Effects on Light-Duty Spark-Ignition Engine Particle Emissions. Energy & Fuels, 2011. 25: p. 4977-4985.
49. Whitaker, P., Kapus, P., Ogris, M., and Hollerer, P., “Measures to Reduce Particulate Emissions from Gasoline DI engines,” SAE Int. J. Engines 4(1):1498-1512, 2011, doi:10.4271/2011-01-1219.
50. Wang, D. and Lee, C., “Continuous Multicomponent Fuel Film Vaporization Model for Multidimensional Engine Modeling,” SAE Technical Paper 2005-01-0209, 2005, doi:10.4271/2005-01-0209.