Drop/wall interaction criteria and their applications in diesel spray modeling

Atomization and Sprays

Volumn 17, Issue 6, 2007, Pages 473-499

  Kong, Song Charng ^a  

^a Iowa State University of Science and Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DIESEL FUELS; MATHEMATICAL MODELS; NUCLEATE BOILING; PRESSURE EFFECTS; REYNOLDS NUMBER; WETTING;

DIESEL SPRAY MODELING; LEIDENFROST TEMPERATURE; WEBER NUMBER;

SPRAYING;

DIESEL FUELS; MATHEMATICAL MODELS; NUCLEATE BOILING; PRESSURE EFFECTS; REYNOLDS NUMBER; SPRAYING; WETTING;

EID: 34247859169     PISSN: 10445110     EISSN: None     Source Type: Journal    
DOI: 10.1615/atomizspr.v17.i6.10     Document Type: Article

References (47)

1. R. Meyer and J. B. Heywood, Effect of Engine and Fuel Variables on Liquid Fuel Transport into the Cylinder in Port-Injected SI Engines, SÄE Paper No. 1999-01-0563, 1999.
2. W. S. Mathews, C. F. Lee, and J. E. Peters, Experimental Investigations of Spray/Wall Impingement, Atomization and Sprays, vol. 13, pp. 223-242, 2003.
3. M. C. Drake, T. D. Fansler, A. S. Solomon, and G. A. J. Szekely, Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions from a Wall-Controlled Spark-Ignited Direct-Injection Engine, SAE Paper No. 2003-01-0547, 2003.
4. R. O. Grover, D. A. Assanis, A. M. Lippert, S. H. El Tahry, M. C. Drake, T. D. Fansler, and D. L. Harrington, A Critical Analysis of Splash Criteria for SIDI Spray Impingement, ILASS-Americas, 15th Annual Conference, Madison, WI, 2002.
5. D. W. Stanton and C. J. Rutland, Multi-Dimensional Modeling of Fuel Films in Direct Injection Diesel Engines, ASME Paper No. 97-ICE-56, 1997.
6. A. M. Lippert, D. W. Stanton, R. D. Reitz, C. J. Rutland, and W. L. H. Hallett, Investigating the Effects of Spray Targeting and Impingement on Diesel Engine Cold Start, SAE Paper No. 2000-01-0269, 2000.
7. B. Pinchon, B. Walter, B. Reveille, and M. Miche, New Concepts for Diesel Combustion, THIESEL 2004 Conference, Valencia, Spain, 2004.
8. S. Chandra and C. T. Avedisian, On the Collision of a Droplet with a Solid Surface, Proc. R. Soc. London, vol. 432, no. 1884, pp. 13-41, 1991.
9. S. Nukiyama, The Maximum and Minimum Values of the Heat Q Transmitted from Metal to Boiling Water under Atmospheric Pressure, Int. J. Heat Mass Transfer, vol. 9, pp. 1419-1433, 1966.
10. B. S. Gottfried, C. J. Lee, and K. J. Bell, The Leidenfrost Phenomenon: Film Boiling of Liquid Droplets on a Flat Plate, Int. J. Heat Mass Transfer, vol. 9, pp. 1167-1187, 1966.
11. K. J. Baumeister and F. F. Simon, Leidenfrost Temperature-Its Correlation for Liquid Metals, Cryogens, Hydrocarbons and Water, ASME J. Heat Transfer, vol. 95, pp. 166-173, 1973.
12. G. S. Emmerson, The Effects of Pressure and Surface Material on the Leidenfrost Point of Discrete Drops of Water, Int. J. Heat Mass Transfer, vol. 18, pp. 381-386, 1975.
13. J. D. Bernardin and 1. Mudawar, A Leidenfrost Point Model for Impinging Droplets and Sprays, J. Heat Transfer, ASME Trans., vol. 126, pp. 272-278, 2004.
14. C. T. Avedisian and M. Fatehi, An Experimental Study of the Leiden-frost Evaporation Characteristics of Emulsified Liquid Droplets, Int. J. Heat Mass Transfer, vol. 31, no. 8, 1587-1603, 1988.
15. J. B. Hey wood, Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988.
16. J. F. Wiedenhoefer, A Computational Investigation on the Effects of Radiation and Wall Heat Transfer on Diesel Engine Performance, Ph.D. thesis, University of Wisconsin-Madison, 2002.
17. M. Rein, Phenomena of Liquid Drop Impact on Solid and Liquid Surfaces, Fluid Dyn. Res., vol. 12, pp. 61-93, 1993.
18. S. Chandra and C. T. Avedisian, Observations of Droplet Impingement on a Ceramic Porous Surface, Int. J. Heat Mass Transfer, vol. 35, no. 10, pp. 2377-2388, 1992.
19. L. H. J. Wachters and N. A. J. Westerling, The Heat Transfer from a Hot Wall to Impinging Water Drops in the Spheroidal State, Chem. Eng. Sci., vol. 21, pp. 1047-1056, 1966.
20. J. D. Naber and R. D. Reitz, Modeling Engine Spray/Wall Impingement, SAE Paper No. 880107, 1988.
21. J. D. Naber and P. V. Farrell, Hydrodynamics of Droplet Impingement on a Heated Surface, SAE Paper No. 930919, 1993.
22. N. B. Vargaftik, Tables on the Thermophysical Properties of Liquids and Gases, Wiley, New York, 1975.
23. N. Hatta, H. Fujimoto, K. Kinoshita, and H. Takuda, Experimental Study of Deformation Mechanism of a Water Droplet Impinging on Hot Metallic Surfaces Above the Leidenfrost Temperature, J. Fluids Eng., vol. 119, pp. 692-700, 1997.
24. A. Karl and A. Frohn, Experimental Investigation of Interaction Processes between Droplets and Hot Walls, Phys. Fluids, vol. 12, no. 4, pp. 785-796, 2000.
25. J. D. Bernardin, C. J. Stebbins, and I. Mudawar, Mapping of Impact and Heat Transfer Regimes of Water Drops Impinging on a Polished Surface, Int. J. Heat Mass Transfer, vol. 40, pp. 247-267, 1997.
26. G. E. Cossali, M. Marengo, M. Santini, and J. Watanabe, Secondary Droplet Atomization From Single Drop Impact on Heated Surfaces, ILASS-Europe, 2002.
27. A. L. Yarin and D. A. Weiss, Impact of Drops on Solid Surfaces: Self-Similar Capillary Waves, and Splashing as a New Type of Kinematic Discontinuity, J. Fluid Mech., vol. 283, pp. 141-173, 1995.
28. G. E. Cossali, A. Coghe, and M. Marengo, The Impact of a Single Drop on a Wetted Solid Surface, Exp. Fluids, vol. 22, pp. 463-472, 1997.
29. C. Mundo, M. Sommerfeld, and C. Tropea, Droplet-Wall Collisions; Experimental Studies of the Deformation and Breakup Process, J. Multiphase Flow, vol. 21, pp. 151-173, 1995.
30. C. Mundo, M. Sommerfeld and C. Tropea, On the Modeling of Liquid Sprays Impinging on Surfaces, Atomization and Sprays, vol. 8, pp. 625-652, 1998.
31. K. Park and A. P. Watkins, Comparison of Wall Spray Impaction Models with Experimental Data on Drop Velocity and Sizes, Int. J. Heat Fluid Flow, vol. 17, pp. 424-438, 1996.
32. C. D. Stow and M. G. Hadfield, An Experimental Investigation of Fluid Flow from the Impact of a Water Drop with an Unyielding Dry Surface, Proc. R. Soc. London, vol. 373, pp. 419-441, 1981.
33. G. E. Cossali, M. Marengo, and M. Santini, Multiple Drop Impact on Heat Surface, ICLASS-2003, Italy, 2003.
34. M. Bussmann, S. Chandra, and J. Mostaghimi, Modelling the Splash of a Droplet Impacting a Solid Surface, Phys. Fluids, vol. 12, pp. 3121-3132, 2000.
35. M. Pasandideh-Fard, S. Chandra, and J. Mostaghimi, A Three-Dimensional Model of Droplet Impact and Solidification, Int. J. Heat Mass Transfer, vol. 45, pp. 2229-2242, 2002.
36. R. Lindgren and I. Denbratt, Modeling Gasoline Spray-Wall InteractionA Review of Current Models, SAE 2000-01-2808, 2000.
37. R. Lindgren and I. Denbratt, Modeling Gasoline Spray-Wall Interactions and Comparison to Experimental Data, SAE Paper No. 2004-01-3003, 2004.
38. J. Senda, M. Ohnishi, T. Takahashi, H. Fujimoto, A. Utsunomiya, and M. Wakatabe, Measurement and Modeling on Wall Wetter Fuel Film Profile and Mixture Preparation in Intake Port of SI Engine, SAE Paper No. 1999-01-0798, 1999.
39. C. Bai and A. D. Gosman, Modeling of Gasoline Spray Impingement, Atomization and Sprays, vol. 12, pp. 1-27, 2002.
40. P. J. O'Rourke and A. A. Amsden, A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model, SAE Paper No. 2000-01-0271, 2000.
41. M. Trujillo, M. S. Mathews, C. F. Lee, and J. E. Peters, Modeling and Experiments of Impingement and Atomization of a Liquid Spray on a Wall, Int. J. Engine Res., Vol. 1, pp. 87-105, 2000.
42. Z. Han, Z. Xu, and N. Trigui, Spray/Wall Interaction Models for Multi-dimensional Engines Simulation, Int. J. Engine Res., vol. 1, pp. 127-146, 2000.
43. x Reduction in a Heavy-Duty Diesel Engine Using High Levels of Exhaust Gas Recirculation and Very Early and Very Late Injection, M.S. Thesis, University of Wisconsin-Madison, 2002.
44. N. J. Boyarski and R. D. Reitz, Premixed Compression Ignition (PCI) Combustion with Modeling-Generated Piston Bowl Geometry in a Diesel Engine, SAE Paper No. 2006-01-0198, 2006.
45. M. A. Patterson and R. D. Reitz, Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emissions, SAE Paper No. 980131, 1998.
46. x Emissions Using Detailed Chemistry with Phenomenological Soot Model, ASME Paper No. ICES 2005-1009, 2005.
47. M. Kim, R. D. Reitz, and S. C. Kong, Modeling Early Injection Processes in HSDI Diesel Engines, SAE Paper No. 2006-01-0056, 2006.