Induction machine insulation health state monitoring based on online switching transient exploitation

IEEE Transactions on Industrial Electronics

Volumn 62, Issue 3, 2015, Pages 1835-1845

  Nussbaumer, Peter ^a,b   Vogelsberger, Markus A ^a   Wolbank, Thomas M ^b  

^a BOMBARDIER TRANSPORTATION   (Sweden)

^b VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

AC machines; Condition monitoring; Electric machines; Fault diagnosis; Induction motors; Insulation testing; Motor drives; Pulse width modulated inverters; Rotating machines; Squirrel cage motors

Indexed keywords

ASYNCHRONOUS MACHINERY; CONDITION MONITORING; ELECTRIC DRIVES; ELECTRIC FAULT CURRENTS; ELECTRIC INSULATION; ELECTRIC INSULATION TESTING; ELECTRIC MACHINE THEORY; ELECTRIC MACHINERY; ELECTRIC POWER SYSTEMS; ELECTRIC WINDINGS; FAILURE ANALYSIS; FAULT DETECTION; HEALTH; INDUCTION MOTORS; INSULATION; LOSSES; REPAIR; SIGNAL PROCESSING; SQUIRREL CAGE MOTORS; VARIABLE SPEED DRIVES;

AC MACHINE; INSULATION TESTING; MOTOR DRIVE; PULSE-WIDTH-MODULATED INVERTER; ROTATING MACHINE;

ELECTRIC MACHINE INSULATION;

EID: 84923172287     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2014.2361114     Document Type: Article

References (40)

1. IEEE Committee Report, "Report of large motor reliability survey of industrial and commercial installation, Part I," IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 853-671, Jul. 1985.
2. IEEE Committee Report, "Report of large motor reliability survey of industrial and commercial installation, Part II," IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 865-674, Jul. 1985.
3. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors-A review," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 719-729, Dec. 2005.
4. A. Bellini, F. Filippetti, C. Tassoni, and G.-A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
5. G. C. Stone, "Advancements during the past quarter century in on-line monitoring of motor and generator winding insulation," IEEE Trans. Dielectr. Electr. Insul., vol. 9, no. 5, pp. 746-751, Oct. 2002.
6. G. C. Stone, "Recent important changes in IEEE motor and generator winding insulation diagnostic testing standards," IEEE Trans. Ind. Appl., vol. 41, no. 1, pp. 91-100, Jan./Feb. 2005.
7. F. Guastavino, A. Dardano, E. Torello, and G. F. Massa, "PD activity inside random wire wound motor stator insulation and early failures: A case study analysis," in Proc. IEEE SDEMPED, 2011, pp. 283-287.
8. J. Yang, J. Cho, S. B. Lee, J.-Y. Yoo, and H. D. Kim, "An advanced stator winding insulation quality assessment technique for inverterfed machines," IEEE Trans. Ind. Appl., vol. 44, no. 2, pp. 555-564, Mar./Apr. 2008.
9. G. C. Stone, E. A. Boulter, I. Culbert, and H. Dhirani, Electrical Insulation for Rotating Machines. Piscataway, NJ, USA: IEEE Press, 2004.
10. S. Grubic, J. M. Aller, B. Lu, and T. G. Habetler, "A survey on testing and monitoring methods for stator insulation systems of low-voltage induction machines focusing on turn insulation problems," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4127-4136, Dec. 2008.
11. N. Lahoud, J. Faucher, D. Malec, and P. Maussion, "Electrical aging of the insulation of low-voltage machines: Model definition and test with the design of experiments," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 4147-4155, Sep. 2013.
12. N. Lahoud, J. Faucher, D. Malec, and P. Maussion, "Electrical ageing modeling of the insulation of low voltage rotating machines fed by inverters with the design of experiments (DoE) method," in Proc. IEEE SDEMPED, 2011, pp. 272-277.
13. M. Kaufhold, H. Aninger, M. Berth, J. Speck, and M. Eberhardt, "Electrical stress and failure mechanism of the winding insulation in PWMinverter- fed low-voltage induction motors," IEEE Trans. Ind. Electron., vol. 47, no. 2, pp. 396-402, Apr. 2000.
14. S. Toma, L. Capocchi, and G.-A. Capolino, "Wound-rotor induction generator inter-turn short-circuits diagnosis using a new digital neural network," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 4043-4052, Sep. 2013.
15. L. Capocchi, S. Toma, G.-A. Capolino, F. Fnaiech, and A. Yazidi, "Wound-rotor induction generator short-circuit fault classification using a new neural network based on digital data," in Proc. IEEE SDEMPED, 2011, pp. 638-644.
16. M. S. Ballal, Z. J. Khan, H. M. Suryawanshi, and R. L. Sonolikar, "Adaptive neural fuzzy inference system for the detection of inter-turn insulation and bearing wear faults in induction motor," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 250-258, Feb. 2007.
17. A. Sarikhani and O. A. Mohammed, "Inter-turn fault detection in PM synchronous machines by physics-based back electromotive force estimation," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3472-3484, Aug. 2013.
18. A. Sarikhani, B. Mirafzal, and O. Mohammed, "Inter-turn fault diagnosis of PM synchronous generator for variable speed wind applications using floating-space-vector," in Proc. IEEE IECON, 2010, pp. 2628-2633.
19. S. Cheng and T. G. Habetler, "Using only the dc current information to detect stator turn faults in automotive claw-pole generators," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3462-3471, Aug. 2013.
20. S. Cheng, P. Zhang, and T. G. Habetler, "An impedance identification approach to sensitive detection and location of stator turn-to-turn faults in a closed-loop multiple-motor drive," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1545-1554, May 2011.
21. S. Cheng and T. G. Habetler, "A new method to detect stator turn-toturn faults in a closed-loop multiple-motor drive system," in Proc. IEEE SDEMPED, 2009, pp. 1-6.
22. K.-H. Kim, "Simple online fault detecting scheme for short-circuited turn in a PMSM through current harmonic monitoring," IEEE Trans. Ind. Electron., vol. 58, no. 6, pp. 2565-2568, Jun. 2011.
23. E. Wiedenbrug, G. Frey, and J. Wilson, "Impulse testing and turn insulation deterioration in electric motors," in Proc. IEEE Annu. Pulp Paper Ind. Tech. Conf., 2003, pp. 50-55.
24. D. E. Schump, "Testing to assure reliable operation of electric motors," in Proc. IEEE Ind. Appl. Soc. Annu. Petroleum Chem. Ind. Conf., 1990, pp. 179-184.
25. G. C. Stone, H. G. Sedding, and M. J. Costello, "Application of partial discharge testing to motor and generator stator winding maintenance," IEEE Trans. Ind. Appl., vol. 32, no. 2, pp. 459-464, Mar./Apr. 1996.
26. A. Kheirmand, M. Leijon, and S. M. Gubanski, "New practices for partial discharge detection and localization in large rotating machines," IEEE Trans. Dielectr. Electr. Insul., vol. 10, no. 6, pp. 1042-1052, Dec. 2003.
27. J. K. Nelson and S. Azizi-Ghannad, "Measures and technologies to enhance the insulation condition monitoring of large electrical machines," IEEE Trans. Dielectr. Electr. Insul., vol. 11, no. 1, pp. 102-112, Feb. 2004.
28. J. Yang et al., "Experimental evaluation of using the surge PD test as a predictive maintenance tool for monitoring turn insulation quality in random wound ac motor stator windings," IEEE Trans. Dielectr. Electr. Insul., vol. 19, no. 1, pp. 53-60, Feb. 2012.
29. K. Younsi et al., "On-line capacitance and dissipation factor monitoring of ac stator insulation," IEEE Trans. Dielectr. Electr. Insul., vol. 17, no. 5, pp. 1441-1452, Oct. 2010.
30. S.-B. Lee, J. Yang, K. Younsi, and R. M. Bharadwaj, "An online groundwall and phase-to-phase insulation quality assessment technique for acmachine stator windings," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 946- 957, Jul./Aug. 2006.
31. S. Grubic, T. G. Habetler, and J. Restrepo, "A new concept for online surge testing for the detection of winding insulation deterioration," in Proc. IEEE ECCE, 2010, pp. 2747-2754.
32. S. Grubic, J. Restrepo, and T. G. Habetler, "Online surge testing applied to an induction machine with emulated insulation breakdown," IEEE Trans. Ind. Appl., vol. 49, no. 3, pp. 1358-1366, May/Jun. 2013.
33. P. Nussbaumer, M. A. Vogelsberger, and T. M. Wolbank, "Exploitation of induction machine's high-frequency behavior for online insulation monitoring," in Proc. IEEE SDEMPED, 2013, pp. 579-585.
34. R. J. Kerkman, D. Leggate, and G. L. Skibinski, "Interaction of drive modulation and cable parameters on ac motor transients," IEEE Trans. Ind. Appl., vol. 33, no. 3, pp. 722-731, May/Jun. 1997.
35. Z. Peroutka and V. Kus, "Adverse effects in voltage source inverter-fed drive systems," in Proc. IEEE APEC, 2002, pp. 557-563.
36. P. Nussbaumer, T. M. Wolbank, and M. A. Vogelsberger, "Separation of disturbing influences on induction machine's high-frequency behavior to ensure accurate insulation condition monitoring," in Proc. IEEE APEC, 2013, pp. 1158-1163.
37. F. Perisse, D. Mercier, E. Lefevre, and D. Roger, "Robust diagnostics of stator insulation based on high frequency resonances measurements," IEEE Trans. Dielectr. Electr. Insul., vol. 16, no. 5, pp. 1496-1502, Oct. 2009.
38. S. Savin, S. Ait-Amar, and D. Roger, "Turn-to-turn capacitance variations correlated to PDIV for ac motors monitoring," IEEE Trans. Dielectr. Electr. Insul., vol. 20, no. 1, pp. 34-41, Feb. 2013.
39. V. Mihaila, S. Duchesne, and D. Roger, "A simulation method to predict the turn-to-turn voltage spikes in aPWMfed motor winding," IEEE Trans. Dielectr. Electr. Insul., vol. 18, no. 5, pp. 1609-1615, Oct. 2011.
40. M. Farahani, E. Gockenbach, H. Borsi, K. Schäfer, and M. Kaufhold, "Behavior of machine insulation systems subjected to accelerated thermal aging test," IEEE Trans. Dielectr. Electr. Insul., vol. 17, no. 5, pp. 1364- 1372, Oct. 2010.