A survey on testing and monitoring methods for stator insulation systems of low-voltage induction machines focusing on turn insulation problems

IEEE Transactions on Industrial Electronics

Volumn 55, Issue 12, 2008, Pages 4127-4136

  Grubic, Stefan ^a   Aller, Jose M ^b   Lu, Bin ^c   Habetler, Thomas G ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b UNIVERSIDAD SIMÓN BOLÍVAR   (Venezuela)

^c EATON CORPORATION   (United States)

Author keywords

Induction motors; Interturn shorts; Motor diagnostics; Stator faults; Winding insulation

Indexed keywords

AC MOTORS; COMPUTER NETWORKS; ELECTRIC DRIVES; ELECTRIC MACHINE INSULATION; INDUCTION MOTORS; MONITORING; MOTORS; PROCESS ENGINEERING; PRODUCT DEVELOPMENT; PROJECT MANAGEMENT; STATORS; THEOREM PROVING; WINDING;

CATASTROPHIC FAILURES; ELECTRICAL INSULATION SYSTEMS; ELECTRICAL MACHINES; INDUCTION MACHINES; INTERTURN SHORTS; LITERATURE REVIEWS; LOW VOLTAGES; MONITORING METHODS; MONITORING TECHNIQUES; MOTOR DRIVE SYSTEMS; OFFLINE METHODS; PHASE INSULATIONS; PHYSICAL NATURES; SPECIFIC AREAS; STATOR FAULTS; STATOR INSULATION SYSTEMS; WINDING INSULATION;

PAPER;

EID: 57749177424     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2008.2004665     Document Type: Article

References (125)

1. MOTOR RELIABILITY WORKING GROUP, "Report of large motor reliability survey of industrial and commercial installations, Part I," IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 853-864, Jul. 1985
2. MOTOR RELIABILITY WORKING GROUP, "Report of large motor reliability survey of industrial and commercial installations, Part II," IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 865-872, Jul. 1985
3. "Improved motors for utility applications," General Elect. Co., Schenectady, NY, p. 1763-1, EPRI EL-4286, Oct. 1982.
4. O. V. Thorsen and M. Dalva, "A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals, and oil refineries," IEEE Trans. Ind. Appl., vol. 31, no. 5, pp. 1186-1196, Sep./Oct. 1995.
5. H. W. Penrose, "Test methods for determining the impact of motor condition on motor efficiency and reliability," Ph.D. dissertation, ALL-TEST Pro, LLC, Old Saybrook, CT.
6. G. C. Stone, E. A. Boulter, I. Culbert, and H. Dhirani, Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair. Piscataway, NJ: IEEE Press, 2004.
7. A. Siddique, G. S. Yadava, and B. Singh, "A review of stator fault monitoring techniques of induction motors," IEEE Trans. Energy Convers., vol. 20, no. 1, pp. 106-114, Mar. 2005.
8. D. E. Schump, "Testing to assure reliable operation of electric motors," in Proc. IEEE Ind. Appl. Soc. 37th Annu. Petrol. Chem. Ind. Conf., Sep. 10-12, 1990, pp. 179-184.
9. J. Geiman, "DC step-voltage and surge testing of motors," Maint. Technol., vol. 20, no. 3, pp. 32-39, 2007.
10. IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation, IEEE 1-2000.
11. IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery, IEEE 43-2000.
12. IEEE Guide for Insulation Maintenance of Large Alternating-Current Rotating Machinery (10 000 kVA and larger), IEEE 56-1977.
13. IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Direct Voltage, IEEE 95-1977.
14. Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation, IEEE 286-2000.
15. IEEE Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines, IEEE 522-1992.
16. IEEE Trial Use Guide to the Measurement of Partial Discharges in Rotating Machinery, IEEE 1434-2000.
17. Evaluation of Electrical Endurance of Electrical Insulation Systems IEC 60727, 2003.
18. Rotating Electrical Machines - Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors, IEC 60034-12, 2002.
19. Rotating Electrical Machines - Part 15: Impulse Voltage Withstand Levels of Rotating A.C. Machines With Form-Wound Stator Coils, IEC 60034-15, 2002.
20. Rotating Electrical Machines - Part 17: Cage Induction Motors When Fed From Converters - Application Guide, IEC 60034-17, 2002.
21. Rotating Electrical Machines - Part 26: Effects of Unbalanced Voltages on the Performance of Three-Phase Induction Motors, IEC 60034-22, 2002.
22. Motors and Generators, ANSI/NEMA MG1, 1998.
23. M. E. H. Benbouzid, "Bibliography on induction motors faults detection and diagnosis," IEEE Trans. Energy Convers., vol. 14, no. 4, pp. 1065-1074, Dec. 1999.
24. G. C. Stone, "Advancements during the past quarter century in on-line monitoring of motor and generator winding insulation," IEEE Trans. Dielectr. Electr. Insul., vol. 9, no. 5, pp. 746-751, Oct. 2002.
25. M. A. Awadallah and M. M. Morcos, "Application of AI tools in fault diagnosis of electrical machines and drives-an overview," IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 245-251, Jun. 2003.
26. A. Siddique, G. S. Yadava, and B. Singh, "Applications of artificial intelligence techniques for induction machine stator fault diagnostics: Review," in Proc. 4th IEEE Int. SDEMPED, Aug. 24-26, 2003, pp. 29-34.
27. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "Recent developments of induction motor drives fault diagnosis using AI techniques," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 994-1004, Oct. 2000.
28. Y. Zhongming and W. Bin, "A review on induction motor online fault diagnosis," in Proc. 3rd IPEMC, Aug. 15-18, 2000, vol. 3, pp. 1353-1358.
29. M. E. H. Benbouzid and G. B. Kliman, "What stator current processing-based technique to use for induction motor rotor faults diagnosis?" IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 238-244, Jun. 2003.
30. R. M. Tallam, S. B. Lee, G. C. Stone, G. B. Kliman, J. Yoo, T. G. Habetler, and R. G. Harley, "A survey of methods for detection of stator-related faults in induction machines," IEEE Trans. Ind. Appl. vol. 43, no. 4, pp. 920-933, Jul./Aug. 2007.
31. S. Nandi and H. A. Toliyat, "Condition monitoring and fault diagnosis of electrical machines - A review," in Conf. Rec. 34th IEEE IAS Annu. Meeting, Oct. 3-7, 1999, vol. 1, pp. 197-204.
32. W. McDermid, "How useful are diagnostic tests on rotating machine insulation?" in Proc. 19th Elect. Electron. Insul. Conf. EEIC/ICWA Expo., Chicago, IL, Sep. 25-28, 1989, pp. 209-211.
33. W. McDermid, "Insulation systems and monitoring for stator windings of large rotating machines," IEEE Electr. Insul. Mag., vol. 9, no. 4, pp. 7-15, Jul./Aug. 1993.
34. I. Albizu, I. Zamora, A. J. Mazon, and A. Tapia, "Electric power components and systems," in Techniques for Online Diagnosis of Stator Shorted Turns in Induction Motors. New York: Taylor & Francis, Oct. 2005, pp. 97-114.
35. I. Albizu, I. Zamora, A. J. Mazon, J. R. Saenz, and A. Tapia, "On-line stator fault diagnosis in low voltage induction motors," IEEE Electr. Insul. Mag., vol. 9, no. 4, pp. 7-15, Jul./Aug. 1993.
36. A. H. Bonnett and G. C. Soukup, "Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors," IEEE Trans. Ind. Appl., vol. 28, no. 4, pp. 921-937, Jul./Aug. 1992.
37. Users Manual - Digital Surge/DC HiPot/Resistance Tester Models D3R/ D6R/D12R, Baker Instrument Co., Fort Collins, CO, 2005.
38. G. C. Stone, "Recent important changes in IEEE motor and generator winding insulation diagnostic testing standards," IEEE Trans. Ind. Appl., vol. 41, no. 1, pp. 91-100, Jan./Feb. 2005.
39. C. Lanham, Understanding the Tests That Are Recommended for Electric Motor Predictive Maintenance. Fort Collins, CO: Baker Instrument Co.
40. J. Yang, S. B. Lee, J. Yoo, S. Lee, Y. Oh, and C. Choi, "A stator winding insulation condition monitoring technique for inverter-fed machines," IEEE Trans. Power Electron., vol. 22, no. 5, pp. 2026-2033, Sep. 2007.
41. H. D. Kim, J. Yang, J. Cho, S. B. Lee, and J.-Y. Yoo, "An advanced stator winding insulation quality assessment technique for inverterfed machines," IEEE Trans. Ind. Appl., vol. 44, no. 2, pp. 555-564, Mar./Apr. 2008.
42. S. Nandi and H. A. Toliyat, "Novel frequency-domain-based technique to detect stator interturn faults in induction machines using stator-induced voltages after switch-off," IEEE Trans. Ind. Appl. vol. 38, no. 1, pp. 101-109, Jan./Feb. 2002.
43. J. A. Oliver, H. H.Woodson, and J. S. Johnson, "A turn insulation test for stator coils," IEEE Trans. Power App. Syst., vol. PAS-87, no. 3, pp. 669-678, Mar. 1968.
44. P. Chowdhuri, "Fault detection in three-phase rotating machines," IEEE Trans. Power App. Syst., vol. PAS-91, no. 1, pp. 160-167, Jan. 1972.
45. E. Wiedenbrug, G. Frey, and J. Wilson, "Impulse testing and turn insulation deterioration in electric motors," in Conf. Rec. Annu. IEEE Pulp Paper Ind. Tech. Conf., Jun. 16-20, 2003, pp. 50-55.
46. E. Wiedenbrug, G. Frey, and J. Wilson, "Impulse testing as a predictive maintenance tool," in Proc. 4th IEEE Int. Symp. Diagn. Elect. Mach., Power Electron. Drives, Aug. 24-26 2003, pp. 13-19.
47. B. K. Gupta, B. A. Lloyd, and D. K. Sharma, "Degradation of turn insulation in motor coils under repetitive surges," IEEE Trans. Energy Convers., vol. 5, no. 2, pp. 320-326, Jun. 1990.
48. B. Gupta, "Risk in surge testing of turn insulation in windings of rotating machines," in Proc. Elect. Insul. Conf. Elect. Manuf. Coil Winding Technol., Sep. 23-25 2003, pp. 459-462.
49. J. H. Dymond, M. K. W. Stranges, and N. Stranges, "The effect of surge testing on the voltage endurance life of stator coils," IEEE Trans. Ind. Appl., vol. 41, no. 1, pp. 120-126, Jan./Feb. 2005.
50. M. Melfi, A. M. J. Sung, S. Bell, and G. L. Skibinski, "Effect of surge voltage risetime on the insulation of low-voltage machines fed by PWM converters," IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 766-775, Jul./Aug. 1998.
51. H. D. Kim and Y. H. Ju, "Comparison of off-line and on-line partial discharge for large motors," in Conf. Rec. IEEE Int. Symp. Elect. Insul., Apr. 7-10, 2002, pp. 27-30.
52. X. Ma, X. Ma, B. Yue, W. Lu, and H. Xie, "Study of aging characteristics of generator stator insulation based on temperature spectrum of dielectric dissipation factor," in Proc. 7th Int. Conf. Prop. Appl. Dielectr. Mater., Jun. 1-5, 2003, vol. 1, pp. 294-297.
53. S.Williamson and K. Mirzoian, "Analysis of cage induction motors with stator winding faults," IEEE Trans. Power App. Syst., vol. PAS-104, no. 7, pp. 1838-1842, Jul. 1985.
54. Y. Zhongming and W. Bin, "Simulation of electrical faults of three phase induction motor drive system," in Proc. 32nd IEEE PESC, Jun. 17-21, 2001, vol. 1, pp. 75-80.
55. O. A. Mohammed, N. Y. Abed, and S. Ganu, "Modeling and characterization of induction motor internal faults using finite-element and discrete wavelet transforms," IEEE Trans. Magn., vol. 42, no. 10, pp. 3434-3436, Oct. 2006.
56. R. M. Tallam, T. G. Habetler, and R. G. Harley, "Transient model for induction machines with stator winding turn faults," IEEE Trans. Ind. Appl., vol. 38, no. 3, pp. 632-637, May/Jun. 2002.
57. S. Bachir, S. Tnani, J.-C. Trigeassou, and G. Champenois, "Diagnosis by parameter estimation of stator and rotor faults occurring in induction machines," IEEE Trans. Ind. Electron., vol. 53, no. 3, pp. 963-973, Jun. 2006.
58. B. Lu, T. G. Habetler, and R. G. Harley, "A survey of efficiency-estimation methods of in-service induction motors," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 924-933, Jul./Aug. 2006.
59. S.-B. Lee, T. G. Habetler, R. G. Harley, and D. J. Gritter, "An evaluation of model-based stator resistance estimation for induction motor stator winding temperature monitoring," IEEE Trans. Ind. Appl. vol. 34, no. 4, pp. 766-775, Jul./Aug. 1998.
60. S.-B. Lee and T. G. Habetler, "An online stator winding resistance estimation technique for temperature monitoring of line-connected induction machines," IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 685-694, May/Jun. 2003.
61. Z. Gao, T. G. Habetler, R. G. Harley, and R. S. Colby, "A sensorless adaptive stator winding temperature estimator for mains-fed induction machines with continuous-operation periodic duty cycles," in Conf. Rec. 41st IEEE IAS Annu. Meeting, Oct. 2006, vol. 1, pp. 448-455.
62. F. Briz, M. W. Degner, J. M. Guerrero, and A. B. Diez, "Temperature estimation in inverter fed machines using high frequency carrier signal injection," in Conf. Rec. 42nd IEEE IAS Annu. Meeting, Sep. 23-27, 2007, pp. 2030-2037.
63. R. Beguenane and M. E. H. Benbouzid, "Induction motors thermal monitoring by means of rotor resistance identification," IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 566-570, Sep. 1999.
64. S.-B. Lee, K. Younsi, and G. B. Kliman, "An online technique for monitoring the insulation condition of AC machine stator windings," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 737-745, Dec. 2005.
65. S.-B. Lee, J. Yang, K. Younsi, and R. M. Bharadwaj, "An online ground-wall and phase-to-phase insulation quality assessment technique for AC-machine stator windings," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 946-957, Jul./Aug. 2006.
66. P. Werynski, D. Roger, R. Corton, and J. F. Brudny, "Proposition of a new method for in-service monitoring of the aging of stator winding insulation in AC motors," IEEE Trans. Energy Convers., vol. 21, no. 3, pp. 673-681, Sep. 2006.
67. M. W. Kending and D. N. Rogovin, "Method of conducting broadband impedance response tests to predict stator winding failure," U.S. Patent 6 323 658, Nov. 27, 2001.
68. C. J. Dister, P. A. DelVecchio, and D. N. Rogovin, "System to provide low cost excitation to stator winding to generate impedance spectrum for use in stator diagnostics," U.S. Patent 6 035 265, Mar. 7, 2000.
69. G. B. Kliman, W. J. Premerlani, R. A. Koegl, and D. Hoeweler, "A new approach to on-line turn fault detection in AC motors," in Conf. Rec. 31st IEEE IAS Annu. Meeting, Oct. 6-10, 1996, vol. 1, pp. 687-693.
70. M. Arkan, D. K. Perovic, and P. Unsworth, "Online stator fault diagnosis in induction motors," Proc. Inst. Elect. Eng. - Elect. Power Appl., vol. 148, no. 6, pp. 537-547, Nov. 2001.
71. R. M. Tallam, T. G. Habetler, R. G. Harley, D. J. Gritter, and B. H. Burton, "Neural network based on-line stator winding turn fault detection for induction motors," in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 8-12, 2000, vol. 1, pp. 375-380.
72. R. M. Tallam, T. G. Habetler, and R. G. Harley, "Self-commissioning training algorithms for neural networks with applications to electric machine fault diagnostics," IEEE Trans. Power Electron., vol. 17, no. 6, pp. 1089-1095, Nov. 2002.
73. R. M. Tallam, T. G. Habetler, and R. G. Harley, "Experimental testing of a neural-network-based turn-fault detection scheme for induction machines under accelerated insulation failure conditions," in Proc. 4th IEEE Int. SDEMPED, Aug. 24-26, 2003, pp. 58-62.
74. L. Collamati, F. Filippetti, G. Franceschini, S. Pirani, and C. Tassoni, "Induction machine stator fault on-line diagnosis based on LabVIEW environment," in Proc. 8th Mediterr. Electrotech. Conf. MELECON, May 13-16, 1996, vol. 1, pp. 495-498.
75. F. Briz, M. W. Degner, A. Zamarron, and J. M. Guerrero, "Online stator winding fault diagnosis in inverter-fed AC machines using high-frequency signal injection," IEEE Trans. Ind. Appl., vol. 39, no. 4, pp. 1109-1117, Jul./Aug. 2003.
76. S. M. A. Cruz and A. J. M. Cardoso, "Multiple reference frames theory: A new method for the diagnosis of stator faults in three-phase induction motors," IEEE Trans. Energy Convers., vol. 20, no. 3, pp. 611-619, Sep. 2005.
77. J. L. Kohler, J. Sottile, and F. C. Trutt, "Condition monitoring of stator windings in induction motors. I. Experimental investigation of the effective negative-sequence impedance detector," IEEE Trans. Ind. Appl., vol. 38, no. 5, pp. 1447-1453, Sep./Oct. 2002.
78. J. L. Kohler, J. Sottile, and F. C. Trutt, "Condition monitoring of stator windings in induction motors. II. Experimental investigation of voltage mismatch detectors," IEEE Trans. Ind. Appl., vol. 38, no. 5, pp. 1454-1459, Sep./Oct. 2002.
79. J. L. Kohler, J. Sottile, and F. C. Trutt, "Online condition monitoring of induction motors," IEEE Trans. Ind. Appl., vol. 38, no. 6, pp. 1627-1632, Nov./Dec. 2002.
80. J. L. Kohler, J. Sottile, and F. C. Trutt, "Alternatives for assessing the electrical integrity of induction motors," IEEE Trans. Ind. Appl., vol. 28, no. 5, pp. 1109-1117, Sep./Oct. 1992.
81. J. L. Kohler, J. Sottile, and F. C. Trutt, "Application of online voltage mismatch condition monitoring of induction motor stator windings in a mining environment," in Conf. Rec. 38th IEEE IAS Annu. Meeting Oct. 12-16, 2003, vol. 3, pp. 1637-1644.
82. S.-B. Lee, R. M. Tallam, and T. G. Habetler, "A robust, on-line turn-fault detection technique for induction machines based on monitoring the sequence component impedance matrix," IEEE Trans. Power Electron., vol. 18, no. 3, pp. 865-872, May 2003.
83. M. A. Cash, T. G. Habetler, and G. B. Kliman, "Insulation failure prediction in AC machines using line-neutral voltages," IEEE Trans. Ind. Appl., vol. 34, no. 6, pp. 1234-1239, Nov./Dec. 1998.
84. B. Mirafzal and N. A. O. Demerdash, "Induction machine broken-bar fault diagnosis using the rotor magnetic field space vector orientation," in Conf. Rec. 38th IEEE IAS Annu. Meeting, Oct. 12-16, 2003, vol. 3, pp. 1847-1854.
85. B. Mirafzal and N. A. O. Demerdash, "Effects of load on diagnosing broken bar faults in induction motors using the pendulous oscillation of the rotor magnetic field orientation," in Conf. Rec. 39th IEEE IAS Annu. Meeting, Oct. 3-7, 2004, vol. 2, pp. 699-707.
86. B. Mirafzal, R. J. Povinelli, and N. A. O. Demerdash, "Interturn fault diagnosis in induction motors using the pendulous oscillation phenomenon," IEEE Trans. Energy Convers., vol. 21, no. 4, pp. 871-882, Dec. 2006.
87. B.-Q. Xu, H.-M. Li, and L.-L. Sun, "Detection of stator winding inter-turn short circuit fault in induction motors," in Proc. Int. Conf. Power Syst. Technol. (PowerCon), Nov. 21-24, 2004, vol. 2, pp. 1005-1009.
88. J. Penman, H. G. Sedding, B. A. Lloyd, and W. T. Fink, "Detection and location of interturn short circuits in the stator windings of operating motors," IEEE Trans. Energy Convers., vol. 9, no. 4, pp. 652-658, Dec. 1994.
89. T. Assaf, H. Henao, and G.-A. Capolino, "Simplified axial flux spectrum method to detect incipient stator inter-turn short-circuits in induction machine," in Proc. IEEE Int. Symp. Ind. Electron., May 4-7, 2004, vol. 2, pp. 815-819.
90. I. Rodriguez, R. Alves, and V. Guzman, "Analysis of air gap flux to detect induction motor faults," in Proc. 41st Int. UPEC, Sep. 6-8, 2006, vol. 2, pp. 690-694.
91. B. Ayhan, M.-Y. Chow, and M.-H. Song, "Multiple discriminant analysis and neural-network-based monolith and partition fault-detection schemes for broken rotor bar in induction motors," IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1298-1308, Jun. 2006.
92. S. H. Kia, H. Henao, and G.-A. Capolino, "A high-resolution frequency estimation method for three-phase induction machine fault detection," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2305-2314, Aug. 2007.
93. H. Xianghui, T. G. Habetler, and R. G. Harley, "Detection of rotor eccentricity faults in a closed-loop drive-connected induction motor using an artificial neural network," IEEE Trans. Power Electron., vol. 22, no. 4, pp. 1552-1559, Jul. 2007.
94. G. Joksimovic and J. Penman, "The detection of interturn short circuits in the stator windings of operating motors," in Proc. 24th Annu. Conf. IEEE Ind. Electron. Soc. (IECON), Aug. 31-Sep. 4, 1998, vol. 4, pp. 1974-1979.
95. G. Gentile, S. Meo, and A. Ometto, "Induction motor current signature analysis to diagnostics, of stator short circuits," in Proc. 4th IEEE Int. SDEMPED, Aug. 24-26, 2003, pp. 47-51.
96. A. Stavrou, H. G. Sedding, and J. Penman, "Current monitoring for detecting inter-turn short circuits in induction motors," IEEE Trans. Energy Convers., vol. 16, no. 1, pp. 32-37, Mar. 2001.
97. W. T. Thomson and D. Morrison, "On-line diagnosis of stator shorted turns in mains and inverter fed low voltage induction motors," in Proc. Int. Conf. Power Electron., Mach. Drives, Jun. 4-7, 2002, pp. 122-127.
98. J.-H. Jung, J.-J. Lee, and B.-H. Kwon, "Online diagnosis of induction motors using MCSA," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1842-1852, Dec. 2006.
99. J. Cusido, J. A. Rosero, J. A. Ortega, A. Garcia, and L. Romeral, "Induction motor fault detection by using wavelet decomposition on dq0 components," in Proc. IEEE Int. Symp. Ind. Electron., Jul. 9-13, 2006, vol. 3, pp. 2406-2411.
100. S. H. Chetwani, M. K. Shah, and M. Ramamoorty, "Online condition monitoring of induction motors through signal processing," in Proc. 8th ICEMS, Sep. 27-29, 2005, vol. 3, pp. 2175-2179.
101. H. M. Emara, M. E. Ammar, A. Bahgat, and H. T. Dorrah, "Stator fault estimation in induction motors using particle swarm optimization," in Proc. IEEE IEMDC, Jun. 1-4, 2003, vol. 3, pp. 1469-1475.
102. D. B. Durocher and G. R. Feldmeier, "Future control technologies in motor diagnostics and system wellness," in Conf. Rec. Annu. IEEE Pulp Paper Ind. Tech. Conf., Jun. 16-20, 2003, pp. 98-106.
103. D. Kostic-Perovic, M. Arkan, and P. Unsworth, "Induction motor fault detection by space vector angular fluctuation," in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 8-12, 2000, vol. 1, pp. 388-394.
104. N. Arthur and J. Penman, "Induction machine condition monitoring with higher order spectra," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1031-1041, Oct. 2000.
105. F. C. Trutt, J. Sottile, and J. L. Kohler, "Condition monitoring of induction motor stator windings using electrically excited vibrations," in Conf. Rec. 37th IEEE IAS Annu. Meeting, Oct. 13-18, 2002, vol. 4, pp. 2301-2305.
106. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "AI techniques in induction machines diagnosis including the speed ripple effect," IEEE Trans. Ind. Appl., vol. 34, no. 1, pp. 98-108, Jan./Feb. 1998.
107. F. Filippetti, A. Uncini, C. Piazza, P. Campolucci, C. Tassoni, and G. Franceschini, "Neural network architectures for fault diagnosis and parameter recognition in induction machines," in Proc. 8th Mediterr. Electrotech. Conf. (MELECON), May 13-16, 1996, vol. 1, pp. 289-293.
108. R. R. Schoen, B. K. Lin, T. G. Habetler, J. H. Schlag, and S. Farag, "An unsupervised, on-line system for induction motor fault detection using stator current monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1280-1286, Nov./Dec. 1995.
109. J. F. Martins, V. F. Pires, and A. J. Pires, "Unsupervised neural-network-based algorithm for an on-line diagnosis of three-phase induction motor stator fault," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 259-264, Feb. 2007.
110. F. Zidani, M. E. H. Benbouzid, D. Diallo, and M. S. Nait-Said, "Induction motor stator faults diagnosis by a current Concordia pattern-based fuzzy decision system," IEEE Trans. Energy Convers. vol. 18, no. 4, pp. 469-475, Dec. 2003.
111. M. S. Ballal, Z. J. Khan, H. M. Suryawanshi, and R. L. Sonolikar, "Adaptive neural fuzzy inference system for the detection of inter-turn insulation and bearing wear faults in induction motor," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 250-258, Feb. 2007.
112. G. Stone and J. Kapler, "Stator winding monitoring," IEEE Ind. Appl. Mag., vol. 4, no. 5, pp. 15-20, Sep./Oct. 1998.
113. G. C. Stone, B. A. Lloyd, S. R. Campbell, and H. G. Sedding, "Development of automatic, continuous partial discharge monitoring systems to detect motor and generator partial discharges," in Proc. IEEE Int. Elect. Mach. Drives, May 18-21, 1997, pp. MA2/3.1-MA2/3.3.
114. G. C. Stone, S. R. Campbell, B. A. Lloyd, and S. Tetreault, "Which inverter drives need upgraded motor stator windings," in Proc. Ind. Appl. Soc. 47th Annu. Petrol. Chem. Ind. Conf., Sep. 11-13, 2000, pp. 149-154.
115. S. R. Campbell and G. C. Stone, "Investigations into the use of temperature detectors as stator winding partial discharge detectors," in Conf. Rec. IEEE Int. Symp. Elect. Insul., Jun. 11-14, 2006, pp. 369-375.
116. M. Kaufhold, G. Borner, M. Eberhardt, and J. Speck, "Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse-controlled inverters," IEEE Electr. Insul. Mag., vol. 12, no. 5, pp. 9-16, Sep./Oct. 1996.
117. F. W. Fetherston, B. F. Finlay, and J. J. Russell, "Observations of partial discharges during surge comparison testing of random wound electric motors," IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 538-544, Sep. 1999.
118. N. Hayakawa and H. Okubo, "Partial discharge characteristics of inverter-fed motor coil samples under ac and surge voltage conditions," IEEE Electr. Insul. Mag., vol. 21, no. 1, pp. 5-10, Jan./Feb. 2005.
119. H. Okubo, N. Hayakawa, and G. C. Montanari, "Technical development on partial discharge measurement and electrical insulation techniques for low voltage motors driven by voltage inverters," IEEE Trans. Dielectr. Electr. Insul., vol. 14, no. 6, pp. 1516-1530, Dec. 2007.
120. E. J. Wiedenbrug, A. Ramme, E. Matheson, A. von Jouanne, and A. K.Wallace, "Modern online testing of induction motors for predictive maintenance and monitoring," IEEE Trans. Ind. Appl., vol. 38, no. 5, pp. 1466-1472, Sep./Oct. 2002.
121. T. M. Wolbank and R. Wohrnschimmel, "On-line stator winding faults detection in inverter fed induction motors by stator current reconstruction," in Proc. 9th Int. Conf. Elect. Mach. Drives, Sep. 1-3, 1999, pp. 253-257.
122. F. Villada, D. Cadavid, N. Munoz, D. Valencia, and D. Parra, "Fault diagnosis in induction motors fed by PWM inverters," in Proc. 9th Int. Conf. Elect. Mach. Drives (Conf. Publ. No. 468), Sep. 1-3, 1999, pp. 253-257.
123. S. M. A. Cruz and A. J. M. Cardoso, "Diagnosis of stator inter-turn short circuits in DTC induction motor drives," IEEE Trans. Ind. Appl., vol. 40, no. 5, pp. 1349-1360, Sep./Oct. 2004.
124. S. M. A. Cruz, A. J. M. Cardoso, and H. A. Toliyat, "Diagnosis of stator, rotor and airgap eccentricity faults in three-phase induction motors based on the multiple reference frames theory," in Conf. Rec. 38th IEEE IAS Annu. Meeting, Oct. 12-16, 2003, vol. 2, pp. 1340-1346.
125. C. Chao-Ming and K. A. Loparo, "Electric fault detection for vector-controlled induction motors using the discrete wavelet transform," in Proc. Amer. Control Conf., Jun. 24-26, 1998, vol. 6, pp. 3297-3301.