A simulation method to predict the turn-to-turn voltage spikes in a PWM fed motor winding

IEEE Transactions on Dielectrics and Electrical Insulation

Volumn 18, Issue 5, 2011, Pages 1609-1615

  Mihaila, Vasile ^a,b   Duchesne, Stérphane ^a,b   Roger, Daniel ^a,b  

^a UNIV LILLE   (France)

^b LSEE   (France)

Author keywords

equivalent circuit; Motor winding; simulation tool; steep fronted pulse; voltage stress

Indexed keywords

HIGH FREQUENCY HF; HIGH RELIABILITY; MOTOR WINDING; MOTOR WINDINGS; NUMERICAL SIMULATION METHOD; PWM INVERTER; SIMULATION METHODS; SIMULATION PACKAGES; SIMULATION RESULT; SIMULATION TOOL; STATOR SLOT; STEEP FRONTED PULSE; VOLTAGE DISTRIBUTION; VOLTAGE SPIKES; VOLTAGE STRESS;

COMPUTER SIMULATION; FINITE ELEMENT METHOD; NUMERICAL METHODS; WINDING MACHINES; WIRE;

WINDING;

EID: 80054076925     PISSN: 10709878     EISSN: None     Source Type: Journal    
DOI: 10.1109/TDEI.2011.6032831     Document Type: Conference Paper

References (21)

1. M. Kaufhold, H. Auinger, M. Berth, J. Speck, and M. Eberhardt, "Electrical stress and failure mechanism of the winding insulation in PWM-inverter-fed low-voltage induction motors", IEEE Trans. Industrial Electronics, Vol. 47, No. 2, pp. 396-402, 2000.
2. M. Kaufhold, G. Borner, M. Eberhardt, and J. Speck, "Failure mechanism of the interturn insulation of low voltage electric machines fed by pulsecontrolled inverters", IEEE Electr. lnsul. Mag., Vol. 12, No. 5, pp. 9-16, 1996.
3. T. Lebey, P. Castelan, G. C. Montanari, and I. Ghinello, "Influence of PWMtype voltage waveforms on reliability of machine insulation system", 8th Int'l. Conf. Harmonics and Quality of Power (ICHQP), Athens, Greece, pp. 994-998, 1998.
4. F. Maeght, "Contribution à l'étude des contraintes engendrées au niveau des bobinages des systèmes électrotechniques soumis à des signaux MLI", Ph.D. thesis, Université des Sciences et Technologies de Lille, Lille, France, 1994.
5. F. Schemmel, K. Bauer, and M. Kaufhold, "Reliability and statistical lifetime-prognosis of motor winding insulation in low-voltage power drive systems", IEEE Electr. lnsul. Mag., Vol. 25, No. 4, pp. 6-13, 2009.
6. L. Gubbala, A. von Jouanne, P. Enjeti, C. Singh, and H. A. Toliyat, "Voltage distribution in the windings of an AC motor subjected to high dV/dt PWM voltages", 26th Annual IEEE Power Electronics Specialists Conference (PESC), Atlanta, Georgia, USA, pp. 579-585, 1995.
7. M. Melfi, A. M. J. Sung, S. Bell, and G. L. Skibinski, "Effect of surge voltage risetime on the insulation of low-voltage machines fed by PWM converters", IEEE Trans. Ind. Appl., Vol. 34, No.4, pp. 766-775, 1998.
8. W. Yin, "Failure mechanism of winding insulations in inverter-fed motors", IEEE Electr. Insul. Mag., Vol. 13, No. 6, pp. 18-23, 1997.
9. P. Bidan, T. Lebey, and C. Neacsu, "Development of a new off-line test procedure for low voltage rotating machines fed by adjustable speed drives (ASD)", IEEE Trans. Dielectr. Electr. Insul., Vol. 10, No. 1, pp. 168-175, 2003.
10. A. Mbaye, F. Grigorescu, T. Lebey, and B. Ai, "Existence of partial discharges in low-voltage induction machines supplied by PWM drives", IEEE Trans. Dielectr. Electr. Insul., Vol. 3, No.4, pp. 554-560, 1996.
11. J. L. Guardado, J. A. Flores, V. Venegas, J. L. Naredo, and F. A. Uribe, "A machine winding model for switching transient studies using network synthesis", IEEE Trans. Energy Conversion, Vol. 20, No. 2, pp. 322-328, 2005.
12. J. L. Guardado and K. J. Cornick, "Calculation of machine winding electrical parameters at High Frequencies for switching transient studies", IEEE Trans. Energy Conversion, Vol. 11, No.1, pp. 33-40, 1996.
13. S. Islam and G. Ledwich, "An equivalent circuit for calculation of interturn voltage distribution of stator windings in the presence of slot discharges", IEEE 5th Int'l. Conf. Properties and Applications of Dielectr. Materials, Seoul, South Korea, pp. 507-510, 1997.
14. B. Mirafzal, G. L. Skibinski, and R. M. Tallam, "Determination of parameters in the universal Induction Motor model", IEEE Trans. Ind. Appl., Vol. 45, No.1, pp. 142-151, 2009.
15. F. Perisse, P. Werynski, and D. Roger, "A new method for AC machine turn insulation diagnostic based on High Frequency resonances", IEEE Trans. Dielectr. Electr. Insul., Vol. 14, No. 5, pp. 1308-1315, 2007.
16. G. Suresh, H. A. Toliyat, D. A. Rendusara, and P. N. Enjeti, "Predicting the transient effects of PWM voltage waveform on the stator windings of random wound induction motors", IEEE Trans. Power Electronics, Vol. 14, No. 1, pp. 23-30, 1999.
17. B. Vaseghi, B. Nahid-Mobarakeh, N. Takorabet, and F. Meibody-Tabar, "Modeling of non-salient PM synchronous machines under stator winding inter-turn fault condition: Dynamic model-FEM model", IEEE Vehicle Power and Propulsion Conf. (VPPC), Arlington, USA, pp. 635-640, 2007.
18. P. Bidan, T. Lebey, G. Montseny, C. Neacsu, and J. Saint-Michel, "Transient voltage distribution in inverter fed motor windings: Experimental study and modeling", IEEE Trans. Power Electronics, Vol. 16, No. 1, pp. 92-100, 2001.
19. C. Petrarca, A. Maffucci, V. Tucci, and M. Vitelli, "Analysis of the voltage distribution in a motor stator winding subjected to steep-fronted surge voltages by means of a multiconductor lossy transmission line model", IEEE Trans. Energy Conversion, Vol. 19, No. 1, pp. 7-17, 2004.
20. J. M. Martinez-Tarifa, H. Amaris-Duarte, and J. Sanz-Feito, "Frequencydomain model for calculation of voltage distribution through random wound coils and its interaction with stray capacitances", IEEE Trans. Energy Conversion, Vol. 23, No. 3, pp. 742-751, 2008.
21. S. Duchesne, E. Napieralska-Juszczak, and D. Roger, "Eddy current influence on electromagnetic emissions of laminated cores", Int'l. J. Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 26, No. 4, pp. 986-1004, 2007.