메뉴 건너뛰기




Volumn 15, Issue 3, 2015, Pages 367-376

Roll-to-roll gravure printed silver patterns to guarantee printability and functionality for mass production

Author keywords

Ag flake; Mass production; Polyimide; Printed electronics; Roll to roll gravure printing

Indexed keywords

POLYIMIDES; PRINTING; SILVER;

EID: 84921524080     PISSN: 15671739     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cap.2015.01.007     Document Type: Article
Times cited : (41)

References (29)
  • 3
    • 84921446172 scopus 로고    scopus 로고
    • A fully inkjet-printed wireless and chipless sensor for CO2 and temperature detection
    • 1-1
    • a. vena, L. Sydanheimo, M. Tentzeris, and L. Ukkonen A fully inkjet-printed wireless and chipless sensor for CO2 and temperature detection Sensors J. IEEE 2014 1-1
    • (2014) Sensors J. IEEE
    • Vena, A.1    Sydanheimo, L.2    Tentzeris, M.3    Ukkonen, L.4
  • 4
    • 84902674898 scopus 로고    scopus 로고
    • Recent progress of high performance polymer OLED and OPV materials for organic printed electronics
    • C. Sekine, Y. Tsubata, T. Yamada, M. Kitano, and S. Doi Recent progress of high performance polymer OLED and OPV materials for organic printed electronics Sci. Technol. Adv. Mater. 15 2014 034203
    • (2014) Sci. Technol. Adv. Mater. , vol.15 , pp. 034203
    • Sekine, C.1    Tsubata, Y.2    Yamada, T.3    Kitano, M.4    Doi, S.5
  • 5
    • 84894160192 scopus 로고    scopus 로고
    • Direct intense pulsed light sintering of inkjet-printed copper oxide layers within six milliseconds
    • H. Kang, E. Sowade, and R.R. Baumann Direct intense pulsed light sintering of inkjet-printed copper oxide layers within six milliseconds ACS Appl. Mater. Interfaces 6 2014 1682 1687
    • (2014) ACS Appl. Mater. Interfaces , vol.6 , pp. 1682-1687
    • Kang, H.1    Sowade, E.2    Baumann, R.R.3
  • 8
    • 60449105587 scopus 로고    scopus 로고
    • Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
    • F.C. Krebs Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing Sol. Energy Mater. Sol. Cells 93 2009 465 475
    • (2009) Sol. Energy Mater. Sol. Cells , vol.93 , pp. 465-475
    • Krebs, F.C.1
  • 10
    • 84864996724 scopus 로고    scopus 로고
    • Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz
    • H. Park, H. Kang, Y. Lee, Y. Park, J. Noh, and G. Cho Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz Nanotechnology 23 2012 344006
    • (2012) Nanotechnology , vol.23 , pp. 344006
    • Park, H.1    Kang, H.2    Lee, Y.3    Park, Y.4    Noh, J.5    Cho, G.6
  • 11
    • 11244349809 scopus 로고    scopus 로고
    • Direct gravure printing (DGP) method for printing fine-line electrical circuits on ceramics
    • M. Kittila, J. Hagberg, E. Jakku, and S. Leppavuori Direct gravure printing (DGP) method for printing fine-line electrical circuits on ceramics Electron. Packag. Manuf. IEEE Trans. 27 2004 109 114
    • (2004) Electron. Packag. Manuf. IEEE Trans. , vol.27 , pp. 109-114
    • Kittila, M.1    Hagberg, J.2    Jakku, E.3    Leppavuori, S.4
  • 12
    • 84877326002 scopus 로고    scopus 로고
    • Profile control of inkjet printed silver electrodes and their application to organic transistors
    • K. Fukuda, T. Sekine, D. Kumaki, and S. Tokito Profile control of inkjet printed silver electrodes and their application to organic transistors ACS Appl. Mater. Interfaces 5 2013 3916 3920
    • (2013) ACS Appl. Mater. Interfaces , vol.5 , pp. 3916-3920
    • Fukuda, K.1    Sekine, T.2    Kumaki, D.3    Tokito, S.4
  • 13
    • 84862902694 scopus 로고    scopus 로고
    • Sintering condition effect on the characteristics of ink-jet printed silver pattern on flexible cellulose paper
    • S. Mun, S. Yun, H. Jung, and J. Kim Sintering condition effect on the characteristics of ink-jet printed silver pattern on flexible cellulose paper Curr. Appl. Phys. 12 2012 e10 e13
    • (2012) Curr. Appl. Phys. , vol.12 , pp. e10-e13
    • Mun, S.1    Yun, S.2    Jung, H.3    Kim, J.4
  • 15
    • 84879106558 scopus 로고    scopus 로고
    • Optimization of aerosol jet printing for high-resolution, high-aspect ratio silver lines
    • A. Mahajan, C.D. Frisbie, and L.F. Francis Optimization of aerosol jet printing for high-resolution, high-aspect ratio silver lines ACS Appl. Mater. Interfaces 5 2013 4856 4864
    • (2013) ACS Appl. Mater. Interfaces , vol.5 , pp. 4856-4864
    • Mahajan, A.1    Frisbie, C.D.2    Francis, L.F.3
  • 17
    • 84899114066 scopus 로고    scopus 로고
    • Design and fabrication of screen-printed silver circuits for stretchable electronics
    • K.-S. Kim, K.-H. Jung, and S.-B. Jung Design and fabrication of screen-printed silver circuits for stretchable electronics Microelectron. Eng. 120 2014 216 220
    • (2014) Microelectron. Eng. , vol.120 , pp. 216-220
    • Kim, K.-S.1    Jung, K.-H.2    Jung, S.-B.3
  • 18
    • 67249090861 scopus 로고    scopus 로고
    • Performance characterization of screen printed radio frequency identification antennas with silver nanopaste
    • D.-Y. Shin, Y. Lee, and C.H. Kim Performance characterization of screen printed radio frequency identification antennas with silver nanopaste Thin Solid Films 517 2009 6112 6118
    • (2009) Thin Solid Films , vol.517 , pp. 6112-6118
    • Shin, D.-Y.1    Lee, Y.2    Kim, C.H.3
  • 19
    • 84897549307 scopus 로고    scopus 로고
    • Lubrication-related residue as a fundamental process scaling limit to gravure printed electronics
    • R. Kitsomboonloha, and V. Subramanian Lubrication-related residue as a fundamental process scaling limit to gravure printed electronics Langmuir 30 2014 3612 3624
    • (2014) Langmuir , vol.30 , pp. 3612-3624
    • Kitsomboonloha, R.1    Subramanian, V.2
  • 20
    • 0033379107 scopus 로고    scopus 로고
    • Variation of gravure coating thickness during early stages of doctor blade wear
    • R. Hanumanthu Variation of gravure coating thickness during early stages of doctor blade wear AIChE J. 45 1999 2487 2494
    • (1999) AIChE J. , vol.45 , pp. 2487-2494
    • Hanumanthu, R.1
  • 22
    • 84863988894 scopus 로고    scopus 로고
    • Formulation and screen printing of water based conductive flake silver pastes onto green ceramic tapes for electronic applications
    • R. Faddoul, N. Reverdy-Bruas, and A. Blayo Formulation and screen printing of water based conductive flake silver pastes onto green ceramic tapes for electronic applications Mater. Sci. Eng. B 177 2012 1053 1066
    • (2012) Mater. Sci. Eng. B , vol.177 , pp. 1053-1066
    • Faddoul, R.1    Reverdy-Bruas, N.2    Blayo, A.3
  • 23
    • 84884873343 scopus 로고    scopus 로고
    • An approach for controlling printed line-width in high resolution roll-to-roll gravure printing
    • H.A.D. Nguyen, J. Lee, C.H. Kim, K.-H. Shin, and D. Lee An approach for controlling printed line-width in high resolution roll-to-roll gravure printing J. Micromechanics Microengineering 23 2013 095010
    • (2013) J. Micromechanics Microengineering , vol.23 , pp. 095010
    • Nguyen, H.A.D.1    Lee, J.2    Kim, C.H.3    Shin, K.-H.4    Lee, D.5
  • 24
    • 81155150029 scopus 로고    scopus 로고
    • Use of copper ink for fabricating conductive electrodes and RFID antenna tags by screen printing
    • Y. Kim, B. Lee, S. Yang, I. Byun, I. Jeong, and S.M. Cho Use of copper ink for fabricating conductive electrodes and RFID antenna tags by screen printing Curr. Appl. Phys. 12 2012 473 478
    • (2012) Curr. Appl. Phys. , vol.12 , pp. 473-478
    • Kim, Y.1    Lee, B.2    Yang, S.3    Byun, I.4    Jeong, I.5    Cho, S.M.6
  • 25
    • 84903276598 scopus 로고    scopus 로고
    • Effect of process parameters on fidelity of printed line width in high resolution roll-to-roll gravure printing
    • H.A.D. Nguyen, K.-H. Shin, and D. Lee Effect of process parameters on fidelity of printed line width in high resolution roll-to-roll gravure printing Jpn. J. Appl. Phys. 53 2014 05HC04
    • (2014) Jpn. J. Appl. Phys. , vol.53 , pp. 05HC04
    • Nguyen, H.A.D.1    Shin, K.-H.2    Lee, D.3
  • 26
    • 29344435770 scopus 로고    scopus 로고
    • Flow visualization of the liquid emptying process in scaled-up gravure grooves and cells
    • X. Yin, and S. Kumar Flow visualization of the liquid emptying process in scaled-up gravure grooves and cells Chem. Eng. Sci. 61 2006 1146 1156
    • (2006) Chem. Eng. Sci. , vol.61 , pp. 1146-1156
    • Yin, X.1    Kumar, S.2
  • 27
    • 56549117594 scopus 로고    scopus 로고
    • A comparative study on roll-to-roll gravure printing on PET and BOPP webs with aqueous ink
    • J.-W. Lee, K.K. Mun, and Y.T. Yoo A comparative study on roll-to-roll gravure printing on PET and BOPP webs with aqueous ink Prog. Org. Coatings 64 2009 98 108
    • (2009) Prog. Org. Coatings , vol.64 , pp. 98-108
    • Lee, J.-W.1    Mun, K.K.2    Yoo, Y.T.3
  • 28
    • 77956059016 scopus 로고    scopus 로고
    • Characteristics of gravure printed InGaZnO thin films as an active channel layer in thin film transistors
    • Y. Choi, G.H. Kim, W.H. Jeong, H.J. Kim, B.D. Chin, and J.-W. Yu Characteristics of gravure printed InGaZnO thin films as an active channel layer in thin film transistors Thin Solid Films 518 2010 6249 6252
    • (2010) Thin Solid Films , vol.518 , pp. 6249-6252
    • Choi, Y.1    Kim, G.H.2    Jeong, W.H.3    Kim, H.J.4    Chin, B.D.5    Yu, J.-W.6
  • 29
    • 33646252041 scopus 로고    scopus 로고
    • Marangoni effect reverses coffee-ring depositions
    • H. Hu, and R.G. Larson Marangoni effect reverses coffee-ring depositions J. Phys. Chem. B 110 2006 7090 7094
    • (2006) J. Phys. Chem. B , vol.110 , pp. 7090-7094
    • Hu, H.1    Larson, R.G.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.